I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s

http:/mercurial.intuxication.org/hg/s2-liplianin
http:/mercurial.intuxication.org/hg/szap-s2

Signature · 6 lines

Igor M. Liplianin

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Steven Toth

2008-10-08 21:10 UTC #2 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

Quoted 9 lines · Igor M. Liplianin

I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
http:/mercurial.intuxication.org/hg/s2-liplianin
http:/mercurial.intuxication.org/hg/szap-s2

Thanks.

I can do some basic testing over the next 3 nights. I'll be in touch.

- Steve

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Goga777

2008-10-09 04:41 UTC #3 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

In reply to Igor M. Liplianin

Hi, Igor

it's fine :) thanks

as we already have discussed on Russian forum - there's LOCK problem with high SR (sr=44958 dvb-s channels). But can somebody to test it with dvb-s2 8psk channels with sr=30000

Goga

Quoted 8 lines

I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
http:/mercurial.intuxication.org/hg/s2-liplianin
http:/mercurial.intuxication.org/hg/szap-s2

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Newsy Paper

2008-10-09 09:40 UTC #4 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

Hi Igor, hi Goga777,

it's not working with SR 30000 FEC 3/4 dvb-s2 8PSK, still the same problem.

kind regards

Newsy

--- Goga777 <[email protected]> schrieb am Do, 9.10.2008:

Quoted 22 lines

Von: Goga777 <[email protected]>
Betreff: Re: [linux-dvb] [vdr] stb0899 and tt s2-3200
An: "VDR Mailing List" <[email protected]>
CC: [email protected]
Datum: Donnerstag, 9. Oktober 2008, 6:41
Hi, Igor
it's fine :) thanks
as we already have discussed on Russian forum - there's LOCK problem with high SR (sr=44958 dvb-s channels). But can somebody to test it with dvb-s2 8psk channels with sr=30000
Goga
Quoted 2 lines
I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to
test it.
Quoted 4 lines
Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s

Quoted 8 lines

Quoted 2 lines
http:/mercurial.intuxication.org/hg/s2-liplianin
http:/mercurial.intuxication.org/hg/szap-s2
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Ales Jurik

2008-10-09 12:04 UTC #5 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

Quoted 8 lines · Newsy Paper

Hi Igor, hi Goga777,
it's not working with SR 30000 FEC 3/4 dvb-s2 8PSK, still the same problem.
kind regards
Newsy

It seems that patch from
http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027264.html is not applied. The internal PLL must be disabled when setting new frequency as is written in stb6100 documentation.

Regards,

Ales

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Goga777

2008-10-09 12:43 UTC #6 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

Quoted 11 lines

Quoted 6 lines
it's not working with SR 30000 FEC 3/4 dvb-s2 8PSK, still the same problem.
kind regards
Newsy
It seems that patch from
http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027264.html is not applied. The internal PLL must be disabled when setting new frequency as is written in stb6100 documentation.

has your July-patch any relation with stb0899 patches from Alex Betis ?

http://www.linuxtv.org/pipermail/linux-dvb/2008-October/029455.html
http://www.linuxtv.org/pipermail/linux-dvb/2008-September/029361.html

Goga

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Ales Jurik

2008-10-09 13:08 UTC #7 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

Quoted 12 lines · On Thursday 09 of October 2008, Goga777 wrote:

Quoted 11 lines
Quoted 6 lines
it's not working with SR 30000 FEC 3/4 dvb-s2 8PSK, still the same problem.
kind regards
Newsy
It seems that patch from
http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027264.html is not applied. The internal PLL must be disabled when setting new frequency as is written in stb6100 documentation.

Quoted 6 lines

has your July-patch any relation with stb0899 patches from Alex Betis ?
http://www.linuxtv.org/pipermail/linux-dvb/2008-October/029455.html
http://www.linuxtv.org/pipermail/linux-dvb/2008-September/029361.html
Goga

I don't think so as Alex's patches are for demodulator (stb0899) but my was for tuner (stb6100).

Regarding stb6100 doc the tuning procedure should be:
1. Disable PLL (LPEN_LPEN)
2. Set-up the tuner
3. Start PLL
4. Start VCO search
5. Wait for 5 ms
6. Disable VCO search, turn off VCO search clock and disable LPF BW clock

The steps 1-5 should be done in 5 steps (not less) and as I remeber I've got better result when inserting small delay between steps 1 and 2 and the delay from step 5 was set to 10ms. In stb6100.c are steps 1 and 2 done together within 1 write to stb6100 registers and this seems to be not optimal for some modulations.

Regards,

Ales

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Goga777

2008-10-09 13:36 UTC #8 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

Quoted 30 lines

Quoted 12 lines
Quoted 11 lines
Quoted 6 lines
it's not working with SR 30000 FEC 3/4 dvb-s2 8PSK, still the same problem.
kind regards
Newsy
It seems that patch from
http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027264.html is not applied. The internal PLL must be disabled when setting new frequency as is written in stb6100 documentation.
Quoted 6 lines
has your July-patch any relation with stb0899 patches from Alex Betis ?
http://www.linuxtv.org/pipermail/linux-dvb/2008-October/029455.html
http://www.linuxtv.org/pipermail/linux-dvb/2008-September/029361.html
Goga
I don't think so as Alex's patches are for demodulator (stb0899) but my was for tuner (stb6100).
Regarding stb6100 doc the tuning procedure should be:
1. Disable PLL (LPEN_LPEN)
2. Set-up the tuner
3. Start PLL
4. Start VCO search
5. Wait for 5 ms
6. Disable VCO search, turn off VCO search clock and disable LPF BW clock

Quoted 5 lines

The steps 1-5 should be done in 5 steps (not less) and as I remeber I've got better result when inserting small delay between steps 1 and 2 and the delay from step 5 was set to 10ms. In stb6100.c are steps 1 and 2 done together within 1 write to stb6100 registers and this seems to be not optimal for some modulations.

that's why TT3200 owners have to try both patches together - from you and from Alex Betis ? is it correct ?

Goga

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Ales Jurik

2008-10-09 13:51 UTC #9 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

Quoted 36 lines · On Thursday 09 of October 2008, Goga777 wrote:

Quoted 30 lines
Quoted 12 lines
Quoted 11 lines
Quoted 6 lines
it's not working with SR 30000 FEC 3/4 dvb-s2 8PSK, still the same problem.
kind regards
Newsy
It seems that patch from
http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027264.html is not applied. The internal PLL must be disabled when setting new frequency as is written in stb6100 documentation.
Quoted 6 lines
has your July-patch any relation with stb0899 patches from Alex Betis ?
http://www.linuxtv.org/pipermail/linux-dvb/2008-October/029455.html
http://www.linuxtv.org/pipermail/linux-dvb/2008-September/029361.html
Goga
I don't think so as Alex's patches are for demodulator (stb0899) but my was for tuner (stb6100).
Regarding stb6100 doc the tuning procedure should be:
1. Disable PLL (LPEN_LPEN)
2. Set-up the tuner
3. Start PLL
4. Start VCO search
5. Wait for 5 ms
6. Disable VCO search, turn off VCO search clock and disable LPF BW clock
Quoted 5 lines
The steps 1-5 should be done in 5 steps (not less) and as I remeber I've got better result when inserting small delay between steps 1 and 2 and the delay from step 5 was set to 10ms. In stb6100.c are steps 1 and 2 done together within 1 write to stb6100 registers and this seems to be not optimal for some modulations.

Quoted 4 lines

that's why TT3200 owners have to try both patches together - from you and from Alex Betis ? is it correct ?
Goga

Yes, I think so, but now I'm not able to test it as I don't have the TT S2-3200 more in my PC. If nobody will be able to test it I'll try to do it this weekend.

Regards,

Ales

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Alex Betis

2008-10-09 13:58 UTC #10 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

I will try that patch together with mine soon. Will update with results.

Quoted 51 lines · Ales Jurik

Quoted 1 line · On Thursday 09 of October 2008, Goga777 wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
it's not working with SR 30000 FEC 3/4 dvb-s2 8PSK, still the
same
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
problem.
kind regards
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
Newsy
It seems that patch from
http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027264.htmlis
not applied. The internal PLL must be disabled when setting new frequency as is written in stb6100 documentation.
has your July-patch any relation with stb0899 patches from Alex Betis
?
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
http://www.linuxtv.org/pipermail/linux-dvb/2008-October/029455.html
http://www.linuxtv.org/pipermail/linux-dvb/2008-September/029361.html
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
Goga
I don't think so as Alex's patches are for demodulator (stb0899) but my was for tuner (stb6100).
Quoted 7 lines
Quoted 7 lines
Regarding stb6100 doc the tuning procedure should be:
1. Disable PLL (LPEN_LPEN)
2. Set-up the tuner
3. Start PLL
4. Start VCO search
5. Wait for 5 ms
6. Disable VCO search, turn off VCO search clock and disable LPF BW
clock
Quoted 2 lines
Quoted 2 lines
The steps 1-5 should be done in 5 steps (not less) and as I remeber
I've
Quoted 9 lines
Quoted 4 lines
got better result when inserting small delay between steps 1 and 2 and the delay from step 5 was set to 10ms. In stb6100.c are steps 1 and 2 done together within 1 write to stb6100 registers and this seems to be not optimal for some modulations.
that's why TT3200 owners have to try both patches together - from you and from Alex Betis ? is it correct ?
Goga
Yes, I think so, but now I'm not able to test it as I don't have the TT S2-3200 more in my PC. If nobody will be able to test it I'll try to do it this weekend.

Quoted 9 lines

Regards,
Ales
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Igor M. Liplianin

2008-10-23 00:07 UTC #11 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

In reply to Ales Jurik

Quoted 48 lines · On 9 октября 2008, [email protected], Goga777 <[email protected]> wrote:

Quoted 38 lines · On Thursday 09 of October 2008, Goga777 wrote:
Quoted 32 lines
Quoted 12 lines
Quoted 11 lines
Quoted 6 lines
it's not working with SR 30000 FEC 3/4 dvb-s2 8PSK, still the same problem.
kind regards
Newsy
It seems that patch from
http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027264.html is not applied. The internal PLL must be disabled when setting new frequency as is written in stb6100 documentation.
Quoted 7 lines
has your July-patch any relation with stb0899 patches from Alex Betis ?
http://www.linuxtv.org/pipermail/linux-dvb/2008-October/029455.html
http://www.linuxtv.org/pipermail/linux-dvb/2008-September/029361.html
Goga
I don't think so as Alex's patches are for demodulator (stb0899) but my was for tuner (stb6100).
Regarding stb6100 doc the tuning procedure should be:
1. Disable PLL (LPEN_LPEN)
2. Set-up the tuner
3. Start PLL
4. Start VCO search
5. Wait for 5 ms
6. Disable VCO search, turn off VCO search clock and disable LPF BW clock
Quoted 5 lines
The steps 1-5 should be done in 5 steps (not less) and as I remeber I've got better result when inserting small delay between steps 1 and 2 and the delay from step 5 was set to 10ms. In stb6100.c are steps 1 and 2 done together within 1 write to stb6100 registers and this seems to be not optimal for some modulations.
Quoted 4 lines
that's why TT3200 owners have to try both patches together - from you and from Alex Betis ? is it correct ?
Goga
Yes, I think so, but now I'm not able to test it as I don't have the TT S2-3200 more in my PC. If nobody will be able to test it I'll try to do it this weekend.

Quoted 8 lines

Regards,
Ales
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hi Ales

I (we all) need your signed-off-by line like this:

Signed-off-by Your Name Here <your e-mail here>

It is necessary for future commit to v4l-dvb (and kernel) tree

I tested your patch and found it very useful, so thank you!

Igor

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Ales Jurik

2008-10-23 08:22 UTC #12 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

Quoted 6 lines · Igor M. Liplianin

On 9 октября 2008, [email protected], Goga777 <[email protected]> wrote:
Hi Ales
I (we all) need your signed-off-by line like this:

Quoted 7 lines

Signed-off-by Your Name Here <your e-mail here>
It is necessary for future commit to v4l-dvb (and kernel) tree
I tested your patch and found it very useful, so thank you!
Igor

ok and thanks,

Ales

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Alex Betis

2008-10-09 13:56 UTC #13 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

In reply to Ales Jurik

Hi Ales,

Could you share the stb6100 documentation or point me to a place where I can find it?

Thanks.

Quoted 16 lines · Ales Jurik

Quoted 3 lines · Newsy Paper
Hi Igor, hi Goga777,
it's not working with SR 30000 FEC 3/4 dvb-s2 8PSK, still the same
problem.
Quoted 5 lines
kind regards
Newsy
It seems that patch from
http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027264.html is not applied. The internal PLL must be disabled when setting new frequency as is written in stb6100 documentation.

Quoted 9 lines

Regards,
Ales
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Ales Jurik

2008-10-09 14:15 UTC #14 lore raw

Re: [linux-dvb] [vdr] stb0899 and tt s2-3200

Quoted 7 lines · Alex Betis

Hi Ales,
Could you share the stb6100 documentation or point me to a place where I can find it?
Thanks.

I't under NDA. But I'm ready to cooperate.

Regards,

Ales

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hans Werner

2008-10-11 02:12 UTC #15 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

In reply to Igor M. Liplianin

-------- Original-Nachricht --------

Quoted 5 lines

Datum: Thu, 9 Oct 2008 00:00:25 +0300
Von: "Igor M. Liplianin" <[email protected]>
An: [email protected], Steven Toth <[email protected]>, Steven Toth <[email protected]>, Darron Broad <[email protected]>, Manu Abraham <[email protected]>, [email protected]
Betreff: [linux-dvb] stb0899 and tt s2-3200

Quoted 12 lines

I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
http:/mercurial.intuxication.org/hg/s2-liplianin
http:/mercurial.intuxication.org/hg/szap-s2
Signature · 1 line
Igor M. Liplianin

Igor,

the attached patch (against http://mercurial.intuxication.org/hg/s2-liplianin)
adds S2API support for the STB0899+Mantis based cards such as the Twinhan VP-1041 (also known as Azurewave AD SP400 or Technisat Skystar HD2)

Could you please add it to your s2-liplianin repository?

It includes Mantis PCI bridge, CU1216 and Fujitsu MB86A16 DVB-S/DSS DC Receiver support.

It is the same as the code from Manu Abraham's mantis tree at http://jusst.de/hg/mantis,
so thanks to Manu.

I tested with the Twinhan VP-1041.
Channel locking works for me for some (but not yet all) channels with Kaffeine (S2API patch). Perhaps it will be better with your szap-s2 when I have time to test that.

Regards,
Hans

Signature · 4 lines

Release early, release often.

Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten 
Browser-Versionen downloaden: http://www.gmx.net/de/go/browser

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Goga777

2008-10-11 07:00 UTC #16 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

Приветствую, Hans

Quoted 27 lines

-------- Original-Nachricht --------
Quoted 5 lines
Datum: Thu, 9 Oct 2008 00:00:25 +0300
Von: "Igor M. Liplianin" <[email protected]>
An: [email protected], Steven Toth <[email protected]>, Steven Toth <[email protected]>, Darron Broad <[email protected]>, Manu Abraham <[email protected]>, [email protected] Betreff: [linux-dvb] stb0899 and tt s2-3200
Quoted 12 lines
I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
http:/mercurial.intuxication.org/hg/s2-liplianin http:/mercurial.intuxication.org/hg/szap-s2
Signature · 1 line
Igor M. Liplianin
Igor,
the attached patch (against http://mercurial.intuxication.org/hg/s2-liplianin)
adds S2API support for the STB0899+Mantis based cards such as the Twinhan VP-1041 (also known as Azurewave AD SP400 or Technisat Skystar HD2)
Could you please add it to your s2-liplianin repository?

Quoted 8 lines

It includes Mantis PCI bridge, CU1216 and Fujitsu MB86A16 DVB-S/DSS DC Receiver support.
It is the same as the code from Manu Abraham's mantis tree at http://jusst.de/hg/mantis,
so thanks to Manu.
I tested with the Twinhan VP-1041.
Channel locking works for me for some (but not yet all) channels with Kaffeine (S2API patch). Perhaps it will be better with your szap-s2 when I have time to test that.

did you try to use stb0899/stb6100 cumulative patch from Alex Betis ?
http://linuxtv.org/pipermail/linux-dvb/2008-October/029613.html

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hans Werner

2008-10-11 13:25 UTC #17 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

Quoted 41 lines

Приветствую, Hans
Quoted 4 lines
-------- Original-Nachricht --------
Quoted 3 lines
Datum: Thu, 9 Oct 2008 00:00:25 +0300
Von: "Igor M. Liplianin" <[email protected]>
An: [email protected], Steven Toth <[email protected]>, Steven
Toth <[email protected]>, Darron Broad
Quoted 1 line
Quoted 1 line
<[email protected]>, Manu Abraham <[email protected]>,
[email protected] Betreff: [linux-dvb] stb0899 and tt s2-3200
Quoted 10 lines
Quoted 10 lines
I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
http:/mercurial.intuxication.org/hg/s2-liplianin http:/mercurial.intuxication.org/hg/szap-s2
Quoted 7 lines
Quoted 3 lines
Signature · 1 line
Igor M. Liplianin
Igor,
the attached patch (against
http://mercurial.intuxication.org/hg/s2-liplianin)
Quoted 2 lines
adds S2API support for the STB0899+Mantis based cards such as the Twinhan VP-1041 (also known as Azurewave AD SP400 or Technisat Skystar
HD2)
Quoted 4 lines
Could you please add it to your s2-liplianin repository?
It includes Mantis PCI bridge, CU1216 and Fujitsu MB86A16 DVB-S/DSS DC
Receiver support.
Quoted 2 lines
It is the same as the code from Manu Abraham's mantis tree at
http://jusst.de/hg/mantis,
Quoted 2 lines
so thanks to Manu.

Quoted 8 lines

Quoted 2 lines
I tested with the Twinhan VP-1041.
Channel locking works for me for some (but not yet all) channels with
Kaffeine (S2API patch).
Quoted 1 line
Perhaps it will be better with your szap-s2 when I have time to test
that.
did you try to use stb0899/stb6100 cumulative patch from Alex Betis ?
http://linuxtv.org/pipermail/linux-dvb/2008-October/029613.html

Hi Goga,

no, but I was aware of Alex's patch and I just need to find the time to look into it. The patch I sent does not change any stb0899 or stb6100 code in s2-liplianin, it just adds the mantis code which was absent, so the stb0899/stb6100 pieces are no better or worse than s2-liplianin.

Regards,
Hans

Signature · 9 lines

Release early, release often.

GMX Kostenlose Spiele: Einfach online spielen und Spaß haben mit Pastry Passion!
http://games.entertainment.gmx.net/de/entertainment/games/free/puzzle/6169196

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Igor M. Liplianin

2008-10-11 09:40 UTC #18 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

In reply to Hans Werner

В сообщении от 11 October 2008 05:12:09 Hans Werner написал(а):

Quoted 30 lines

-------- Original-Nachricht --------
Quoted 13 lines
Datum: Thu, 9 Oct 2008 00:00:25 +0300
Von: "Igor M. Liplianin" <[email protected]>
An: [email protected], Steven Toth <[email protected]>, Steven Toth <[email protected]>, Darron Broad <[email protected]>, Manu Abraham <[email protected]>, [email protected] Betreff: [linux-dvb] stb0899 and tt s2-3200
I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
Quoted 5 lines
http:/mercurial.intuxication.org/hg/s2-liplianin http:/mercurial.intuxication.org/hg/szap-s2
--
Igor M. Liplianin
Igor,
the attached patch (against
http://mercurial.intuxication.org/hg/s2-liplianin) adds S2API support for the STB0899+Mantis based cards such as the
Twinhan VP-1041 (also known as Azurewave AD SP400 or Technisat Skystar HD2)
Could you please add it to your s2-liplianin repository?

Quoted 8 lines

It includes Mantis PCI bridge, CU1216 and Fujitsu MB86A16 DVB-S/DSS DC Receiver support.
It is the same as the code from Manu Abraham's mantis tree at
http://jusst.de/hg/mantis, so thanks to Manu.
I tested with the Twinhan VP-1041.
Channel locking works for me for some (but not yet all) channels with

Same with my s2-3200, so I marked the driver like experimental( I must say almost useless, as my favorite channel unwatchable) for now.
I quickly ported to S2 API + s2-3200 that code:
http://www.twinhan.com/files/AW/Linux/AZLinux_v1.4.2_CI_FC6.tar.gz
And it locks every channel (???), but stream appears broken, though I can see, that channel is right.
It is necessary to make driver stable, then to add anything.

Quoted 5 lines

Kaffeine (S2API patch). Perhaps it will be better with your szap-s2 when I have time to test that.
Regards,
Hans

Regards
Igor

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hans Werner

2008-10-11 13:46 UTC #19 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

Quoted 39 lines

В сообщении от 11 October 2008 05:12:09 Hans Werner написал(а):
Quoted 5 lines
-------- Original-Nachricht --------
Quoted 3 lines
Datum: Thu, 9 Oct 2008 00:00:25 +0300
Von: "Igor M. Liplianin" <[email protected]>
An: [email protected], Steven Toth <[email protected]>, Steven
Toth
Quoted 13 lines
Quoted 13 lines
<[email protected]>, Darron Broad <[email protected]>, Manu Abraham <[email protected]>, [email protected] Betreff: [linux-dvb] stb0899 and tt s2-3200
I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
http:/mercurial.intuxication.org/hg/s2-liplianin http:/mercurial.intuxication.org/hg/szap-s2
Quoted 7 lines
Quoted 2 lines
--
Igor M. Liplianin
Igor,
the attached patch (against
http://mercurial.intuxication.org/hg/s2-liplianin) adds S2API support
for
Quoted 2 lines
the STB0899+Mantis based cards such as the
Twinhan VP-1041 (also known as Azurewave AD SP400 or Technisat Skystar
HD2)
Quoted 6 lines
Could you please add it to your s2-liplianin repository?
It includes Mantis PCI bridge, CU1216 and Fujitsu MB86A16 DVB-S/DSS DC Receiver support.

Quoted 7 lines

Quoted 5 lines
It is the same as the code from Manu Abraham's mantis tree at
http://jusst.de/hg/mantis, so thanks to Manu.
I tested with the Twinhan VP-1041.
Channel locking works for me for some (but not yet all) channels with
Same with my s2-3200, so I marked the driver like experimental( I must say almost useless, as my favorite channel unwatchable) for now.

The patch I sent doesn't change any stb0899 or stb6100 code of course -- it just adds chip support which was absent -- so we should expect the same results I guess.

Quoted 3 lines

I quickly ported to S2 API + s2-3200 that code:
http://www.twinhan.com/files/AW/Linux/AZLinux_v1.4.2_CI_FC6.tar.gz
And it locks every channel (???),

That's good news.

By the way, there are differences between the mantis, cu1216 and mb86a16 code at jusst.de and twinhan.com too.

Quoted 3 lines

but stream appears broken, though I can
see,
that channel is right.

Not so good but fixable I guess by comparing the two drivers.

Quoted 1 line

It is necessary to make driver stable, then to add anything.

Understood. Hopefully there is enough code out there already to be able to put together a working driver.

Quoted 3 lines

Regards
Igor

Thanks,
Hans

Signature · 9 lines

Release early, release often.

GMX Kostenlose Spiele: Einfach online spielen und Spaß haben mit Pastry Passion!
http://games.entertainment.gmx.net/de/entertainment/games/free/puzzle/6169196

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hans Werner

2008-10-13 14:34 UTC #20 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

In reply to Hans Werner

-------- Original-Nachricht --------

Quoted 43 lines

Datum: Sat, 11 Oct 2008 04:12:09 +0200
Von: "Hans Werner" <[email protected]>
An: "Igor M. Liplianin" <[email protected]>, [email protected], [email protected], [email protected], [email protected]
Betreff: Re: [linux-dvb] stb0899 and tt s2-3200
-------- Original-Nachricht --------
Quoted 3 lines
Datum: Thu, 9 Oct 2008 00:00:25 +0300
Von: "Igor M. Liplianin" <[email protected]>
An: [email protected], Steven Toth <[email protected]>, Steven Toth
<[email protected]>, Darron Broad <[email protected]>, Manu Abraham <[email protected]>, [email protected]
Quoted 14 lines
Betreff: [linux-dvb] stb0899 and tt s2-3200
I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
http:/mercurial.intuxication.org/hg/s2-liplianin http:/mercurial.intuxication.org/hg/szap-s2
Signature · 1 line
Igor M. Liplianin
Igor,
the attached patch (against
http://mercurial.intuxication.org/hg/s2-liplianin)
adds S2API support for the STB0899+Mantis based cards such as the Twinhan VP-1041 (also known as Azurewave AD SP400 or Technisat Skystar HD2)
Could you please add it to your s2-liplianin repository?
It includes Mantis PCI bridge, CU1216 and Fujitsu MB86A16 DVB-S/DSS DC Receiver support.
It is the same as the code from Manu Abraham's mantis tree at
http://jusst.de/hg/mantis,
so thanks to Manu.

Quoted 7 lines

I tested with the Twinhan VP-1041.
Channel locking works for me for some (but not yet all) channels with Kaffeine (S2API patch).
Perhaps it will be better with your szap-s2 when I have time to test that.
Regards,
Hans

Sorry, two files were missing from that patch. The corrected mantis patch is attached to this message. Hans

Signature · 4 lines

Release early, release often.

Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Igor M. Liplianin

2008-10-13 20:10 UTC #21 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

В сообщении от 13 October 2008 17:34:14 Hans Werner написал(а):

Quoted 54 lines

-------- Original-Nachricht --------
Quoted 52 lines
Datum: Sat, 11 Oct 2008 04:12:09 +0200
Von: "Hans Werner" <[email protected]>
An: "Igor M. Liplianin" <[email protected]>, [email protected], [email protected], [email protected], [email protected] Betreff: Re:
[linux-dvb] stb0899 and tt s2-3200
-------- Original-Nachricht --------
Quoted 3 lines
Datum: Thu, 9 Oct 2008 00:00:25 +0300
Von: "Igor M. Liplianin" <[email protected]>
An: [email protected], Steven Toth <[email protected]>, Steven Toth
<[email protected]>, Darron Broad <[email protected]>, Manu Abraham <[email protected]>, [email protected]
Quoted 8 lines
Betreff: [linux-dvb] stb0899 and tt s2-3200
I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
Quoted 5 lines
http:/mercurial.intuxication.org/hg/s2-liplianin http:/mercurial.intuxication.org/hg/szap-s2
--
Igor M. Liplianin
Igor,
the attached patch (against
http://mercurial.intuxication.org/hg/s2-liplianin)
adds S2API support for the STB0899+Mantis based cards such as the Twinhan VP-1041 (also known as Azurewave AD SP400 or Technisat Skystar HD2)
Could you please add it to your s2-liplianin repository?
It includes Mantis PCI bridge, CU1216 and Fujitsu MB86A16 DVB-S/DSS DC Receiver support.
It is the same as the code from Manu Abraham's mantis tree at
http://jusst.de/hg/mantis,
so thanks to Manu.
I tested with the Twinhan VP-1041.
Channel locking works for me for some (but not yet all) channels with Kaffeine (S2API patch).
Perhaps it will be better with your szap-s2 when I have time to test that.

Quoted 5 lines

Quoted 2 lines
Regards,
Hans
Sorry, two files were missing from that patch. The corrected mantis patch is attached to this message. Hans

I will merge it tonigth or tomorrow. Let peoples trying

Regards
Igor

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hans Werner

2008-10-14 23:12 UTC #22 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

-------- Original-Nachricht --------

Quoted 66 lines

Datum: Mon, 13 Oct 2008 23:09:35 +0300
Von: "Igor M. Liplianin" <[email protected]>
An: "Hans Werner" <[email protected]>
CC: [email protected]
Betreff: Re: [linux-dvb] stb0899 and tt s2-3200
В сообщении от 13 October 2008 17:34:14 Hans Werner написал(а):
Quoted 13 lines
-------- Original-Nachricht --------
Quoted 11 lines
Datum: Sat, 11 Oct 2008 04:12:09 +0200
Von: "Hans Werner" <[email protected]>
An: "Igor M. Liplianin" <[email protected]>, [email protected], [email protected], [email protected], [email protected] Betreff: Re:
[linux-dvb] stb0899 and tt s2-3200
-------- Original-Nachricht --------
Quoted 3 lines
Datum: Thu, 9 Oct 2008 00:00:25 +0300
Von: "Igor M. Liplianin" <[email protected]>
An: [email protected], Steven Toth <[email protected]>, Steven
Toth
Quoted 44 lines
Quoted 43 lines
<[email protected]>, Darron Broad <[email protected]>, Manu Abraham <[email protected]>, [email protected]
Quoted 8 lines
Betreff: [linux-dvb] stb0899 and tt s2-3200
I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
Quoted 5 lines
http:/mercurial.intuxication.org/hg/s2-liplianin http:/mercurial.intuxication.org/hg/szap-s2
--
Igor M. Liplianin
Igor,
the attached patch (against
http://mercurial.intuxication.org/hg/s2-liplianin)
adds S2API support for the STB0899+Mantis based cards such as the Twinhan VP-1041 (also known as Azurewave AD SP400 or Technisat Skystar HD2)
Could you please add it to your s2-liplianin repository?
It includes Mantis PCI bridge, CU1216 and Fujitsu MB86A16 DVB-S/DSS DC Receiver support.
It is the same as the code from Manu Abraham's mantis tree at
http://jusst.de/hg/mantis,
so thanks to Manu.
I tested with the Twinhan VP-1041.
Channel locking works for me for some (but not yet all) channels with Kaffeine (S2API patch).
Perhaps it will be better with your szap-s2 when I have time to test that.
Regards,
Hans

Quoted 8 lines

Quoted 1 line
Sorry, two files were missing from that patch. The corrected mantis
patch
Quoted 1 line
is attached to this message. Hans
I will merge it tonigth or tomorrow. Let peoples trying
Regards
Igor

Thanks, it will bring a wider audience of testers for your stb0899 driver since those with mantis cards will also be using it.
Regards,
Hans

Signature · 9 lines

Release early, release often.

Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten 
Browser-Versionen downloaden: http://www.gmx.net/de/go/browser

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Steven Toth

2008-10-13 16:38 UTC #23 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

In reply to Igor M. Liplianin

Quoted 9 lines · Igor M. Liplianin

I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
http:/mercurial.intuxication.org/hg/s2-liplianin
http:/mercurial.intuxication.org/hg/szap-s2

I haven't had any time to look at this, I'm busy trying to cleanup and get S2API, MFE and general cleanups merged.

Igor, how has the feedback been for these patches? Are they ready for merge, working only for some people, or badly broken and not for this kernel release?

Thanks,

- Steve

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Igor M. Liplianin

2008-10-13 20:02 UTC #24 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

В сообщении от 13 October 2008 19:38:09 Steven Toth написал(а):

Quoted 13 lines

Quoted 8 lines · Igor M. Liplianin
I successfully ported stb0899 to S2API
For know it is just for testing purposes. Feel free to test it. Any feedback welcome.
Locking better with szap-s2 (sorry)
I have tested with DVB-S2 8PSK and DVB-S 27500 kSyms/s
http:/mercurial.intuxication.org/hg/s2-liplianin
http:/mercurial.intuxication.org/hg/szap-s2
I haven't had any time to look at this, I'm busy trying to cleanup and get S2API, MFE and general cleanups merged.

Quoted 7 lines

Igor, how has the feedback been for these patches? Are they ready for merge, working only for some people, or badly broken and not for this kernel release?
Thanks,
- Steve

They working only for some people,
For me, driver locks some transponders( not all ). And it is Manu code + S2 API changes from me

Igor

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Meysam Hariri

2008-10-15 18:29 UTC #25 lore raw

Re: [linux-dvb] stb0899 and tt s2-3200

Hi,

That's right, my test also shows the no-locking or corrupted data issues on 8psk SR 30000 channels still exists on S2 API.

Regards,

Quoted 6 lines · Igor M. Liplianin

They working only for some people,
For me, driver locks some transponders( not all ). And it is Manu code + S2 API changes from me

Quoted 7 lines

Igor
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Ivan Kuten

author

2008-10-14 12:54 UTC #26 lore raw

In reply to Ivan Kuten

Seems nobody is working on this.

Anyway here is attached usb snoop log for A827.
I did not manage to find where is firmware loaded comparing with logs in af9015_firmware_cutter.tar.gz
It seems the firmware is contained in EEPROM.

Regards,
Ivan

Quoted 13 lines

Hello!
Is anybody working on AVerMedia AverTV Hybrid Volar HX (A827) support?
Chips in this USB stick:
* Cypress CY7C68013A
* NXP SAA7136E
* NXP TDA18271HDC1
* Afatech AF9013-N1
I'm interested in TV/Analog input (not DVB-T), am I posting to the right list?

Quoted 10 lines

Regards,
Ivan
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Antti Palosaari

2008-10-14 14:25 UTC #27 lore raw

Quoted 1 line · Ivan Kuten

Seems nobody is working on this.

Actually Zdenek Kabelac <[email protected]> was working this driver for times ago, but I think he has stopped his work. Look thread for more info:
http://www.linuxtv.org/pipermail/linux-dvb/2008-April/025253.html

Quoted 3 lines

Anyway here is attached usb snoop log for A827.
I did not manage to find where is firmware loaded comparing with logs in af9015_firmware_cutter.tar.gz

I did some USB-protocol reverse-engineering for Zdenek. I have also almost fully documented USB-sniff, I can send it to you if you want hack driver more. It should be rather easy to make working driver (DVB-T) from that log.

Quoted 1 line

It seems the firmware is contained in EEPROM.

No its not. It loads firmware to af9013 from driver when stick is plugged. Correct firmware can be downloaded from:
http://palosaari.fi/linux/v4l-dvb/firmware/af9013/

Your sniffs seems to be a little broken where firmware download was made.

You should hack cx88 driver for USB-bridge. There is some commands used in cx88 already.

Here are the USB-protocol commands I know:

i2c write     29
i2c read      2a
streaming on  36
streaming off 37
get ir code   25
power off     dc
power on      de

i2c write 1st 09

get ir code 25
000498: OUT: 000000 ms 009978 ms BULK[00001] >>> 25 000499: OUT: 000000 ms 009978 ms BULK[00081] <<< 00 00 00 00 00

streaming on 36
008607: OUT: 000048 ms 014412 ms BULK[00001] >>> 36 03 00 01

streaming off 37
012176: OUT: 000000 ms 041479 ms BULK[00001] >>> 37

i2c write 29
008622: OUT: 000001 ms 014434 ms BULK[00001] >>> 29 00 00 1d 9b bc 00 008623: OUT: 000001 ms 014435 ms BULK[00081] <<< 01

i2c read 2a
008624: OUT: 000001 ms 014436 ms BULK[00001] >>> 2a 00 00 1d 01 008625: OUT: 000074 ms 014437 ms BULK[00081] <<< 01

008616: OUT: 000001 ms 014425 ms BULK[00001] >>> 0f 01 00 03 01 00 00 008617: OUT: 000001 ms 014426 ms BULK[00081] <<< 01

power off dc
012294: OUT: 000076 ms 042795 ms BULK[00001] >>> dc 00

power on de
000010: OUT: 000001 ms 000135 ms BULK[00001] >>> de 00

i2c write? gpio?
000011: OUT: 000000 ms 000136 ms BULK[00001] >>> 09 02 02 51 1f f9 000012: OUT: 000000 ms 000136 ms BULK[00081] <<< 08 03 07

usb-controller write?
012274: OUT: 000001 ms 042620 ms BULK[00001] >>> 0f 01 00 03 01 01 00 012275: OUT: 000025 ms 042621 ms BULK[00081] <<< 01

Quoted 20 lines

Regards,
Ivan
Quoted 16 lines
Hello!
Is anybody working on AVerMedia AverTV Hybrid Volar HX (A827) support?
Chips in this USB stick:
* Cypress CY7C68013A
* NXP SAA7136E
* NXP TDA18271HDC1
* Afatech AF9013-N1
I'm interested in TV/Analog input (not DVB-T), am I posting to the right list?
Regards,
Ivan

I don't know anything about analog...

regards
Antti

Signature · 6 lines

http://palosaari.fi/

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Zdenek Kabelac

2008-10-16 08:21 UTC #28 lore raw

2008/10/14 Antti Palosaari <[email protected]>:

Quoted 67 lines

Quoted 2 lines · Ivan Kuten
Seems nobody is working on this.
Actually Zdenek Kabelac <[email protected]> was working this driver for times ago, but I think he has stopped his work.
Look thread for more info:
http://www.linuxtv.org/pipermail/linux-dvb/2008-April/025253.html
Quoted 3 lines
Anyway here is attached usb snoop log for A827.
I did not manage to find where is firmware loaded comparing with logs in af9015_firmware_cutter.tar.gz
I did some USB-protocol reverse-engineering for Zdenek. I have also almost fully documented USB-sniff, I can send it to you if you want hack driver more. It should be rather easy to make working driver (DVB-T) from that log.
Quoted 1 line
It seems the firmware is contained in EEPROM.
No its not. It loads firmware to af9013 from driver when stick is plugged. Correct firmware can be downloaded from:
http://palosaari.fi/linux/v4l-dvb/firmware/af9013/
Your sniffs seems to be a little broken where firmware download was made.
You should hack cx88 driver for USB-bridge. There is some commands used in cx88 already.
Here are the USB-protocol commands I know:
i2c write     29
i2c read      2a
streaming on  36
streaming off 37
get ir code   25
power off     dc
power on      de
i2c write 1st 09
get ir code 25
000498: OUT: 000000 ms 009978 ms BULK[00001] >>> 25 000499: OUT: 000000 ms 009978 ms BULK[00081] <<< 00 00 00 00 00
streaming on 36
008607: OUT: 000048 ms 014412 ms BULK[00001] >>> 36 03 00 01
streaming off 37
012176: OUT: 000000 ms 041479 ms BULK[00001] >>> 37
i2c write 29
008622: OUT: 000001 ms 014434 ms BULK[00001] >>> 29 00 00 1d 9b bc 00 008623: OUT: 000001 ms 014435 ms BULK[00081] <<< 01
i2c read 2a
008624: OUT: 000001 ms 014436 ms BULK[00001] >>> 2a 00 00 1d 01 008625: OUT: 000074 ms 014437 ms BULK[00081] <<< 01
008616: OUT: 000001 ms 014425 ms BULK[00001] >>> 0f 01 00 03 01 00 00 008617: OUT: 000001 ms 014426 ms BULK[00081] <<< 01
power off dc
012294: OUT: 000076 ms 042795 ms BULK[00001] >>> dc 00
power on de
000010: OUT: 000001 ms 000135 ms BULK[00001] >>> de 00

Quoted 10 lines

i2c write? gpio?
000011: OUT: 000000 ms 000136 ms BULK[00001] >>> 09 02 02 51 1f f9 000012: OUT: 000000 ms 000136 ms BULK[00081] <<< 08 03 07
usb-controller write?
012274: OUT: 000001 ms 042620 ms BULK[00001] >>> 0f 01 00 03 01 01 00 012275: OUT: 000025 ms 042621 ms BULK[00081] <<< 01
Quoted 1 line

Sorry about being not so active in this area :( - I've got busy with some many other issue :( I've also fairly limited access to windows machine - thus I would really need you 'chat/personal/ help Antti for this - If you are willing to spend couple hours on this - I'd gladly help - but for me the logic behind V4L devices seems to be quite complicated to get it learned within short time - i.e. I have no sharp idea - how each sub controllers are connected together and how could I achieve the similar USB command order.

If we could arrange some time window to work on this - I'll try to do it - though it must be late night hours.

Zdenek

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Ivan Kuten

author

2008-10-16 10:54 UTC #29 lore raw

Hello Zdenek, Antti

I have some spare time to do some work.
First step I need to make USBsnoop working to see where firmware upload goes. Those logs I posted seem a little bit broken, right, because XP crashes and system reboots when usbsnoop enabled. But anyway usbsnoop capture some data.

Antti, can you post a part of usbsnoop log where firmware is loaded?

Regards,
Ivan

Quoted 67 lines

Quoted 47 lines
Correct firmware can be downloaded from:
http://palosaari.fi/linux/v4l-dvb/firmware/af9013/
Your sniffs seems to be a little broken where firmware download was made.
You should hack cx88 driver for USB-bridge. There is some commands used in cx88 already.
Here are the USB-protocol commands I know:
i2c write     29
i2c read      2a
streaming on  36
streaming off 37
get ir code   25
power off     dc
power on      de
i2c write 1st 09
get ir code 25
000498: OUT: 000000 ms 009978 ms BULK[00001] >>> 25 000499: OUT: 000000 ms 009978 ms BULK[00081] <<< 00 00 00 00 00
streaming on 36
008607: OUT: 000048 ms 014412 ms BULK[00001] >>> 36 03 00 01
streaming off 37
012176: OUT: 000000 ms 041479 ms BULK[00001] >>> 37
i2c write 29
008622: OUT: 000001 ms 014434 ms BULK[00001] >>> 29 00 00 1d 9b bc 00 008623: OUT: 000001 ms 014435 ms BULK[00081] <<< 01
i2c read 2a
008624: OUT: 000001 ms 014436 ms BULK[00001] >>> 2a 00 00 1d 01 008625: OUT: 000074 ms 014437 ms BULK[00081] <<< 01
008616: OUT: 000001 ms 014425 ms BULK[00001] >>> 0f 01 00 03 01 00 00 008617: OUT: 000001 ms 014426 ms BULK[00081] <<< 01
power off dc
012294: OUT: 000076 ms 042795 ms BULK[00001] >>> dc 00
power on de
000010: OUT: 000001 ms 000135 ms BULK[00001] >>> de 00
Quoted 9 lines
i2c write? gpio?
000011: OUT: 000000 ms 000136 ms BULK[00001] >>> 09 02 02 51 1f f9 000012: OUT: 000000 ms 000136 ms BULK[00081] <<< 08 03 07
usb-controller write?
012274: OUT: 000001 ms 042620 ms BULK[00001] >>> 0f 01 00 03 01 01 00 012275: OUT: 000025 ms 042621 ms BULK[00081] <<< 01
Sorry about being not so active in this area :( - I've got busy with some many other issue :( I've also fairly limited access to windows machine - thus I would really need you 'chat/personal/ help Antti for this - If you are willing to spend couple hours on this - I'd gladly help - but for me the logic behind V4L devices seems to be quite complicated to get it learned within short time - i.e. I have no sharp idea - how each sub controllers are connected together and how could I achieve the similar USB command order.

Quoted 7 lines

If we could arrange some time window to work on this - I'll try to do it - though it must be late night hours.
Zdenek

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb