mgcoge, mgsuvd: add DTT (LM75) support.
PATCH 1/1 mgcoge, mgsuvd: add DTT (LM75) support.
Signed-off-by Heiko Schocher <[email protected]>
--- include/configs/mgcoge.h | 9 +++++++++ include/configs/mgsuvd.h | 9 +++++++++ 2 files changed, 18 insertions(+), 0 deletions(-)
include/configs/mgcoge.h +9 -0
@@ -81,6 +81,7 @@*/ #include <config_cmd_default.h> +#define CONFIG_CMD_DTT #define CONFIG_CMD_ECHO #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C
@@ -209,6 +210,14 @@#define CFG_EEPROM_PAGE_WRITE_BITS 3#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1/* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0}/* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 +#define CFG_DTT_BUS_NUM (CFG_MAX_I2C_BUS) +#define CFG_IMMR 0xF0000000#define CFG_INIT_RAM_ADDR CFG_IMMR
include/configs/mgsuvd.h +9 -0
@@ -113,6 +113,7 @@#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP +#define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C #define CONFIG_CMD_NFS
@@ -379,4 +380,12 @@#define CFG_EEPROM_PAGE_WRITE_BITS 3#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1/* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0, 2, 4, 6}/* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 +#define CFG_DTT_BUS_NUM (CFG_MAX_I2C_BUS) +#endif /* __CONFIG_H */
Signature · 5 lines
1.5.6.1 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 1/1 mgcoge, mgsuvd: add DTT (LM75) support.
Dear Heiko Schocher,
Quoted 5 lines · In message <[email protected]> you wrote:
Signed-off-by Heiko Schocher <[email protected]>--- include/configs/mgcoge.h | 9 +++++++++ include/configs/mgsuvd.h | 9 +++++++++ 2 files changed, 18 insertions(+), 0 deletions(-)
Added to "next" branch, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I have a very small mind and must live with it. -- Edsger Dijkstra