Skip to contentSkip to conversation

Implement polling for 5200FEC to make netconsole work.

PATCH In review Jon Smirl 2 participants 3 messages Oct 18, 2008 – Oct 21, 2008

Subsystems (2)
lore
Share & tools
lore

Jon Smirl

author
#0 lore raw

PATCH 1/1 Implement polling for 5200FEC to make netconsole work.

Implement polling for 5200FEC to make netconsole work. Tested on Phytec pcm030 and Efika.

---
 drivers/net/fec_mpc52xx.c |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)
drivers/net/fec_mpc52xx.c +18 -0
index 4e4f683..aec3b97 100644
@@ -401,6 +401,21 @@ static int mpc52xx_fec_hard_start_xmit(struct sk_buff *skb, struct net_device *d
 	return 0;
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void mpc52xx_fec_poll_controller(struct net_device *dev)
+{
+	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+
+	disable_irq(priv->t_irq);
+	mpc52xx_fec_tx_interrupt(priv->t_irq, dev);
+	enable_irq(priv->t_irq);
+	disable_irq(priv->r_irq);
+	mpc52xx_fec_rx_interrupt(priv->r_irq, dev);
+	enable_irq(priv->r_irq);
+}
+#endif
+
+
 /* This handles BestComm transmit task interrupts
  */
 static irqreturn_t mpc52xx_fec_tx_interrupt(int irq, void *dev_id)
@@ -926,6 +941,9 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
 	ndev->tx_timeout	= mpc52xx_fec_tx_timeout;
 	ndev->watchdog_timeo	= FEC_WATCHDOG_TIMEOUT;
 	ndev->base_addr		= mem.start;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	ndev->poll_controller = mpc52xx_fec_poll_controller;
+#endif
 
 	priv->t_irq = priv->r_irq = ndev->irq = NO_IRQ; /* IRQ are free for now */
 
author
#1 lore raw

Is anyone going to pick this up?

Quoted 45 lines · Jon Smirl

Implement polling for 5200FEC to make netconsole work. Tested on Phytec pcm030 and Efika.

---
 drivers/net/fec_mpc52xx.c |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)
drivers/net/fec_mpc52xx.c +18 -0
index 4e4f683..aec3b97 100644
@@ -401,6 +401,21 @@ static int mpc52xx_fec_hard_start_xmit(struct sk_buff *skb, struct net_device *d
       return 0;
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void mpc52xx_fec_poll_controller(struct net_device *dev)
+{
+       struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+
+       disable_irq(priv->t_irq);
+       mpc52xx_fec_tx_interrupt(priv->t_irq, dev);
+       enable_irq(priv->t_irq);
+       disable_irq(priv->r_irq);
+       mpc52xx_fec_rx_interrupt(priv->r_irq, dev);
+       enable_irq(priv->r_irq);
+}
+#endif
+
+
 /* This handles BestComm transmit task interrupts
 */
 static irqreturn_t mpc52xx_fec_tx_interrupt(int irq, void *dev_id)
@@ -926,6 +941,9 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
       ndev->tx_timeout        = mpc52xx_fec_tx_timeout;
       ndev->watchdog_timeo    = FEC_WATCHDOG_TIMEOUT;
       ndev->base_addr         = mem.start;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+       ndev->poll_controller = mpc52xx_fec_poll_controller;
+#endif
 
       priv->t_irq = priv->r_irq = ndev->irq = NO_IRQ; /* IRQ are free for now */
 
Signature · 2 lines
Jon Smirl
[email protected]
#2 lore raw
Quoted 1 line · Jon Smirl

Is anyone going to pick this up?

I'm looking at it, but I'm not picking it up for .28. It's non-trivial enough that I would have needed to have it before the merge window opened to get it into .28.

g.

Quoted 54 lines · Jon Smirl
Quoted 36 lines

Implement polling for 5200FEC to make netconsole work. Tested on Phytec pcm030 and Efika.

---
 drivers/net/fec_mpc52xx.c |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)
drivers/net/fec_mpc52xx.c +15 -0
index 4e4f683..aec3b97 100644
@@ -401,6 +401,21 @@ static int mpc52xx_fec_hard_start_xmit(struct sk_buff *skb, struct net_device *d
       return 0;
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void mpc52xx_fec_poll_controller(struct net_device *dev)
+{
+       struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+
+       disable_irq(priv->t_irq);
+       mpc52xx_fec_tx_interrupt(priv->t_irq, dev);
+       enable_irq(priv->t_irq);
+       disable_irq(priv->r_irq);
+       mpc52xx_fec_rx_interrupt(priv->r_irq, dev);
+       enable_irq(priv->r_irq);
+}
+#endif
+
+
 /* This handles BestComm transmit task interrupts
 */
 static irqreturn_t mpc52xx_fec_tx_interrupt(int irq, void *dev_id)

drivers/net/fec_mpc52xx.c mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match) · line 949

Quoted 9 lines
drivers/net/fec_mpc52xx.c +3 -0
@@ -926,6 +941,9 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
       ndev->tx_timeout        = mpc52xx_fec_tx_timeout;
       ndev->watchdog_timeo    = FEC_WATCHDOG_TIMEOUT;
       ndev->base_addr         = mem.start;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+       ndev->poll_controller = mpc52xx_fec_poll_controller;
+#endif
 
       priv->t_irq = priv->r_irq = ndev->irq = NO_IRQ; /* IRQ are free for now */
 

--
Jon Smirl
[email protected]

Signature · 2 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.