pci: use pci_ioremap_bar() in drivers/ide
PATCH 1/1 pci: use pci_ioremap_bar() in drivers/ide
Quoted 1 line
From
9233d7e38207749586c47410b400afcf3e7e59fbMon Sep 17 00:00:00 2001
From: Arjan van de Ven <[email protected]>
Date: Sun, 28 Sep 2008 16:14:10 -0700
Subject: [PATCH] pci: use pci_ioremap_bar() in drivers/ide
Use the newly introduced pci_ioremap_bar() function in drivers/ide. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks.
--- drivers/ide/pci/sgiioc4.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/ide/pci/sgiioc4.c +1 -1
@@ -574,7 +574,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)/* Get the CmdBlk and CtrlBlk Base Registers */ bar0 =pci_resource_start (dev,0 ); - virt_base =ioremap (bar0,pci_resource_len (dev,0 )); + virt_base =pci_ioremap_bar (dev,0 );if (virt_base ==NULL ) {printk (KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n" ,DRV_NAME , bar0);
Signature · 8 lines
1.5.5.1 -- Arjan van de Ven Intel Open Source Technology Centre For development, discussion and tips for power savings, visit http://www.lesswatts.org
Hello.
Quoted 6 lines · Arjan van de Ven
Use the newly introduced
pci_ioremap_bar()function indrivers/ide.pci_ioremap_bar()just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks.Signed-off-by Arjan van de Ven <[email protected]>
MBR, Sergei
Quoted 8 lines · Hello, I wrote:
Quoted 6 lines
Use the newly introduced
pci_ioremap_bar()function indrivers/ide.pci_ioremap_bar()just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks.Signed-off-by Arjan van de Ven <[email protected]>Acked-by Sergei Shtylyov <[email protected]>
No, I'm takign back my ACK.
Since the patch intends to address all drivers/ide/, it's clearly no
compolete -- siimage.c and scc_pata.c beg for the alike change (it will even permit to kill 4 local variables in the latter driver).
MBR, Sergei
Quoted 9 lines · On Wed, 22 Oct 2008 21:40:37 +0400 Sergei Shtylyov <[email protected]>…
Quoted 6 lines · Hello, I wrote:
Quoted 6 lines
Use the newly introduced
pci_ioremap_bar()function indrivers/ide.pci_ioremap_bar()just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks.Signed-off-by Arjan van de Ven <[email protected]>
Quoted 8 lines
Quoted 1 line
Acked-by Sergei Shtylyov <[email protected]>No, I'm takign back my ACK.
Since the patch intends to address alldrivers/ide/, it's clearly
no compolete --siimage.candscc_pata.cbeg for the alike change (it will even permit to kill 4 local variables in the latter driver).MBR, Sergei
I'll be happy to take a second pass, but "doesn't convert everyone" shouldn't really be a reason to do the first pass ;-)
Signature · 3 lines
Arjan van de Ven Intel Open Source Technology Centre For development, discussion and tips for power savings, visit http://www.lesswatts.org
Quoted 9 lines · Arjan van de Ven
Quoted 8 lines
Quoted 8 lines
Quoted 6 lines
Use the newly introduced
pci_ioremap_bar()function indrivers/ide.pci_ioremap_bar()just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks.Signed-off-by Arjan van de Ven <[email protected]>Acked-by Sergei Shtylyov <[email protected]>
Quoted 7 lines
Quoted 4 lines
No, I'm takign back my ACK.
Since the patch intends to address alldrivers/ide/, it's clearly
no compolete --siimage.candscc_pata.cbeg for the alike change (it will even permit to kill 4 local variables in the latter driver).I'll be happy to take a second pass, but "doesn't convert everyone" shouldn't really be a reason to do the first pass ;-)
To not do, you mean?
If you're going to leave this patch as it, it's worth to change the
subject/header reflecting a modest goal of doing this only for one driver. ;-)
MBR, Sergei
Quoted 7 lines · On Wed, 22 Oct 2008 21:40:37 +0400 Sergei Shtylyov <[email protected]>…
Quoted 4 lines · Hello, I wrote:
Quoted 4 lines
Use the newly introduced
pci_ioremap_bar()function indrivers/ide.pci_ioremap_bar()just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks.
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Arjan van de Ven <[email protected]>Acked-by Sergei Shtylyov <[email protected]>No, I'm takign back my ACK.
Since the patch intends to address alldrivers/ide/, it's clearly
no compolete --siimage.candscc_pata.cbeg for the alike change (it will even permit to kill 4 local variables in the latter driver).
like this ?
Quoted 1 line
From
3f88a6936f7802a5d4af6c54a1ef353d14ff1ab2Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <[email protected]>
Date: Wed, 22 Oct 2008 13:21:07 -0700
Subject: [PATCH] ide: two more pci_ioremap_bar() conversions
based on suggestion from Sergei Shtylyov, there are two more places where using pci_ioremap_bar() makes sense.
--- drivers/ide/pci/scc_pata.c | 10 ++++------ drivers/ide/pci/siimage.c | 2 +- 2 files changed, 5 insertions(+), 7 deletions(-)
drivers/ide/pci/scc_pata.c +4 -6
@@ -536,10 +536,6 @@ static u8 scc_udma_filter(ide_drive_t *drive)static int setup_mmio_scc (struct pci_dev *dev,const char *name) { -unsigned long ctl_base =pci_resource_start (dev,0 ); -unsigned long dma_base =pci_resource_start (dev,1 ); -unsigned long ctl_size =pci_resource_len (dev,0 ); -unsigned long dma_size =pci_resource_len (dev,1 );void __iomem *ctl_addr;void __iomem *dma_addr;int i, ret;
@@ -557,10 +553,12 @@ static int setup_mmio_scc (struct pci_dev *dev, const char *name)return ret; } -if ((ctl_addr =ioremap (ctl_base, ctl_size)) ==NULL ) + ctl_addr =pci_ioremap_bar (dev,0 ); +if (!ctl_addr) goto fail_0; -if ((dma_addr =ioremap (dma_base, dma_size)) ==NULL ) + dma_addr =pci_ioremap_bar (dev,1 ); +if (!dma_addr) goto fail_1;pci_set_master (dev);
drivers/ide/pci/siimage.c +1 -1
@@ -784,7 +784,7 @@ static int __devinit siimage_init_one(struct pci_dev *dev, printk(KERN_WARNING DRV_NAME " %s: MMIO ports not " "available\n", pci_name(dev)); }else { - ioaddr =ioremap (bar5, barsize); + ioaddr =pci_ioremap_bar (dev,5 );if (ioaddr ==NULL )release_mem_region (bar5, barsize); }
Signature · 8 lines
1.5.5.1 -- Arjan van de Ven Intel Open Source Technology Centre For development, discussion and tips for power savings, visit http://www.lesswatts.org
Sergei Shtylyov
Acked-byQuoted 7 lines · Arjan van de Ven
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Use the newly introduced
pci_ioremap_bar()function indrivers/ide.pci_ioremap_bar()just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks.Signed-off-by Arjan van de Ven <[email protected]>
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
Acked-by Sergei Shtylyov <[email protected]>No, I'm takign back my ACK.
Since the patch intends to address alldrivers/ide/, it's clearly
no compolete --siimage.candscc_pata.cbeg for the alike change (it will even permit to kill 4 local variables in the latter driver).like this ?
Exactly.
Quoted 9 lines
From
3f88a6936f7802a5d4af6c54a1ef353d14ff1ab2Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <[email protected]>
Date: Wed, 22 Oct 2008 13:21:07 -0700
Subject: [PATCH] ide: two morepci_ioremap_bar()conversionsbased on suggestion from Sergei Shtylyov, there are two more places where using
pci_ioremap_bar()makes sense.Signed-off-by Arjan van de Ven <[email protected]>
Quoted 4 lines
drivers/ide/pci/scc_pata.c +0
-0
[...]
Quoted 5 lines
drivers/ide/pci/scc_pata.c +0
-1@@ -557,10 +553,12 @@ static int setup_mmio_scc (struct pci_dev *dev, const char *name)return ret; } -if ((ctl_addr =ioremap (ctl_base, ctl_size)) ==NULL )
drivers/ide/pci/scc_pata.c static int setup_mmio_scc (struct pci_dev *dev, const char *name) · line 564
Quoted 10 lines
drivers/ide/pci/scc_pata.c +4
-1+ ctl_addr =pci_ioremap_bar (dev,0 ); +if (!ctl_addr) goto fail_0; -if ((dma_addr =ioremap (dma_base, dma_size)) ==NULL ) + dma_addr =pci_ioremap_bar (dev,1 ); +if (!dma_addr) goto fail_1;pci_set_master (dev);
An added bonus here is fixing couple checkpatch.pl's warnings. There were 22 errors and 18 warnings total before this patch. :-)
MBR, Sergei
Quoted 17 lines · I just
Quoted 4 lines
drivers/ide/pci/scc_pata.c +0
-0[...]
Quoted 10 lines
drivers/ide/pci/scc_pata.c +2
-1@@ -557,10 +553,12 @@ static int setup_mmio_scc (struct pci_dev *dev, const char *name) return ret; } -if ((ctl_addr =ioremap (ctl_base, ctl_size)) ==NULL ) + ctl_addr =pci_ioremap_bar (dev,0 ); +if (!ctl_addr) goto fail_0;
Quoted 8 lines
Quoted 6 lines
drivers/ide/pci/scc_pata.c +2
-1-if ((dma_addr =ioremap (dma_base, dma_size)) ==NULL ) + dma_addr =pci_ioremap_bar (dev,1 ); +if (!dma_addr) goto fail_1;pci_set_master(dev);An added bonus here is fixing couple checkpatch.pl's warnings.
Wait, those even were errors, so even better. :-)
MBR, Sergei
Bartlomiej Zolnierkiewicz
AppliedQuoted 25 lines · Sergei Shtylyov
Quoted 7 lines · Arjan van de Ven
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Use the newly introduced
pci_ioremap_bar()function indrivers/ide.pci_ioremap_bar()just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks.Signed-off-by Arjan van de Ven <[email protected]>Quoted 8 lines
Quoted 6 lines
Quoted 1 line
Acked-by Sergei Shtylyov <[email protected]>No, I'm takign back my ACK.
Since the patch intends to address alldrivers/ide/, it's clearly
no compolete --siimage.candscc_pata.cbeg for the alike change (it will even permit to kill 4 local variables in the latter driver).like this ?
Exactly.
Quoted 4 lines
From
3f88a6936f7802a5d4af6c54a1ef353d14ff1ab2Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <[email protected]>
Date: Wed, 22 Oct 2008 13:21:07 -0700
Subject: [PATCH] ide: two morepci_ioremap_bar()conversions
Quoted 6 lines
Quoted 4 lines
based on suggestion from Sergei Shtylyov, there are two more places where using
pci_ioremap_bar()makes sense.Signed-off-by Arjan van de Ven <[email protected]>Acked-by Sergei Shtylyov <[email protected]>
applied
Bartlomiej Zolnierkiewicz
AppliedQuoted 4 lines · Sergei Shtylyov
Hello.
Arjan van de Ven wrote:
Quoted 8 lines
Quoted 6 lines
Use the newly introduced
pci_ioremap_bar()function indrivers/ide.pci_ioremap_bar()just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks.Signed-off-by Arjan van de Ven <[email protected]>Acked-by Sergei Shtylyov <[email protected]>
applied