tty: usb-serial krefs - bad magic number for tty struct (188:0)
Hello,
commit 4a90f09b20f4622dcbff1f0e1e6bae1704f8ad8c
tty: usb-serial krefs
Use kref in the USB serial drivers so that we don't free tty structures from under the URB receive handlers as has historically been the case if you were unlucky. This also gives us a framework for general tty drivers to use tty_port objects and refcount.
Contains two err->dev_err changes merged together to fix clashes in the -next tree.
----
causes problems with my usb hsdpa modem. when I try to connect pppd dies and I get these messages on dmesg:
[...]
usb-storage: device scan complete
PPP generic driver version 2.4.2
bad magic number for tty struct (188:0) in tty_ioctl bad magic number for tty struct (188:0) in tty_ioctl bad magic number for tty struct (188:0) in tty_release_dev bad magic number for tty struct (188:0) in tty_poll bad magic number for tty struct (188:0) in tty_poll bad magic number for tty struct (188:0) in tty_write bad magic number for tty struct (188:0) in tty_ioctl bad magic number for tty struct (188:0) in tty_ioctl bad magic number for tty struct (188:0) in tty_ioctl bad magic number for tty struct (188:0) in tty_release_dev
---
drivers/usb/serial/ChangeLog.history has this:
(03/26/2002) gkh
removed the port->tty check from port_paranoia_check() due to serial consoles not having a tty device assigned to them.
and this seems to be the problem here.
something in this commit seems to make it reach the tty_paranoia_check in tty_ioctl() from drivers/char/tty_io.c, but I could be completely wrong.
Sergio.
Quoted 44 lines · Sergio Luis
Hello,
commit
4a90f09b20f4622dcbff1f0e1e6bae1704f8ad8ctty: usb-serial krefs
Use kref in the USB serial drivers so that we don't free tty structures from under the URB receive handlers as has historically been the case if you were unlucky. This also gives us a framework for general tty drivers to use
tty_portobjects and refcount.Contains two
err->dev_errchanges merged together to fix clashes in the -next tree.Signed-off-by Alan Cox <[email protected]>Signed-off-by Linus Torvalds <[email protected]>----
causes problems with my usb hsdpa modem. when I try to connect pppd dies and I get these messages on dmesg:
[...]
usb-storage: device scan complete
PPP generic driver version 2.4.2
bad magic number for tty struct (188:0) intty_ioctlbad magic number for tty struct (188:0) intty_ioctlbad magic number for tty struct (188:0) intty_release_devbad magic number for tty struct (188:0) intty_pollbad magic number for tty struct (188:0) intty_pollbad magic number for tty struct (188:0) intty_writebad magic number for tty struct (188:0) intty_ioctlbad magic number for tty struct (188:0) intty_ioctlbad magic number for tty struct (188:0) intty_ioctlbad magic number for tty struct (188:0) intty_release_dev---
drivers/usb/serial/ChangeLog.historyhas this:(03/26/2002) gkh
removed theport->ttycheck fromport_paranoia_check()due to serial consoles not having a tty device assigned to them.
Quoted 7 lines
and this seems to be the problem here.
something in this commit seems to make it reach thetty_paranoia_checkintty_ioctl()fromdrivers/char/tty_io.c, but I could be completely wrong.Sergio.
Hello,
one of the problems was the tty_kref_put(tty) in usb_serial_port_work() [drivers/usb/serial/usb-serial.c], that was releasing the tty device. I removed that line and it _almost_ worked. well, it worked, but only _once_. If I stopped the daemon and tried to start it again, it would give me I/O error and would not open /dev/ttyUSB0 anymore.
I'd suggest to revert that commit and to review it more carefully. What do you people think?
Thanks,
Sergio.
Quoted 2 lines
I'd suggest to revert that commit and to review it more carefully. What do you people think?
I suggest you demonstrate a little patience. Its a weekend, its a bug that seems specific to a single device and we've got a ton of time to nail it.
I'll take a look Tuesday and I don't expect it to take long to pin down - there will be an unbalanced kref_put somewhere.
Alan
Quoted 4 lines
one of the problems was the
tty_kref_put(tty)inusb_serial_port_work()[drivers/usb/serial/usb-serial.c], that was releasing the tty device. I removed that line and it _almost_ worked. well, it worked, but only _once_. If I stopped the daemon and tried to
You removed a valid one not the erroneous one it seems.
Unfortunately your bug report doesn't actually say _WHICH_ USB serial driver you are using which makes it a bit hard to be sure I'm looking for the right bug.
Quoted 11 lines · Alan Cox
Quoted 4 lines
one of the problems was the
tty_kref_put(tty)inusb_serial_port_work()[drivers/usb/serial/usb-serial.c], that was releasing the tty device. I removed that line and it _almost_ worked. well, it worked, but only _once_. If I stopped the daemon and tried toYou removed a valid one not the erroneous one it seems.
Unfortunately your bug report doesn't actually say _WHICH_ USB serial driver you are using which makes it a bit hard to be sure I'm looking for the right bug.
The device is a Huawei E220 USB modem. What kind of info can I provide to help you with this? would dmesg help?
Sergio.
Quoted 8 lines · On Tue, 21 Oct 2008 09:42:47 -0300 "Sergio Luis" <[email protected]> wrote:
Quoted 7 lines · Alan Cox
Quoted 4 lines
one of the problems was the
tty_kref_put(tty)inusb_serial_port_work()[drivers/usb/serial/usb-serial.c], that was releasing the tty device. I removed that line and it _almost_ worked. well, it worked, but only _once_. If I stopped the daemon and tried toYou removed a valid one not the erroneous one it seems.
Quoted 7 lines
Quoted 4 lines
Unfortunately your bug report doesn't actually say _WHICH_ USB serial driver you are using which makes it a bit hard to be sure I'm looking for the right bug.
The device is a Huawei E220 USB modem. What kind of info can I provide to help you with this? would dmesg help?
Ok thanks. Thats useful for two reasons
1. I've sent Linus a patch which I think fixes it
2. I have an E220 as well and mine now behaves
Alan