bootm: Add subcommands

PATCH New Kumar Gala 3 participants 12 messages Oct 20, 2008 – Oct 22, 2008

Share & tools

Kumar Gala

author

2008-10-20 16:28 UTC #0 lore raw

PATCH 1/2 bootm: Add subcommands

Add the ability to break the steps of the bootm command into several
subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.

This allows us to do things like manipulate device trees before they are passed to a booting kernel or setup memory for a secondary core in multicore situations.

Not all OS types support all subcommands (currently only start, loados, ramdisk, fdt, and go are supported).

Signed-off-by Kumar Gala <[email protected]>

---
 common/cmd_bootm.c     |  168 +++++++++++++++++++++++++++++++++++++++++++++++-
 include/image.h        |   20 ++++++-
 lib_arm/bootm.c        |    3 +
 lib_avr32/bootm.c      |    3 +
 lib_blackfin/bootm.c   |    3 +
 lib_i386/bootm.c       |    3 +
 lib_m68k/bootm.c       |    3 +
 lib_microblaze/bootm.c |    3 +
 lib_mips/bootm.c       |    3 +
 lib_nios2/bootm.c      |    3 +
 lib_ppc/bootm.c        |    3 +
 lib_sh/bootm.c         |    3 +
 lib_sparc/bootm.c      |    3 +
 13 files changed, 219 insertions(+), 2 deletions(-)

common/cmd_bootm.c +167 -1

index 956e1a0..1b2dfc4 100644
@@ -34,6 +34,7 @@
 #include <bzlib.h>
 #include <environment.h>
 #include <lmb.h>
+#include <linux/ctype.h>
 #include <asm/byteorder.h>
 
 #if defined(CONFIG_CMD_USB)

@@ -296,7 +297,7 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	images.os.start = (ulong)os_hdr;
-	images.valid = 1;
+	images.state = BOOTM_STATE_START;
 
 	return 0;
 }

@@ -399,6 +400,121 @@ static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress)
 	return 0;
 }
 
+/* we overload the cmd field with our state machine info instead of a
+ * function pointer */
+cmd_tbl_t cmd_bootm_sub[] = {
+	U_BOOT_CMD_MKENT(start, 0, 1, (void *)BOOTM_STATE_START, "", ""),
+	U_BOOT_CMD_MKENT(loados, 0, 1, (void *)BOOTM_STATE_LOADOS, "", ""),
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+	U_BOOT_CMD_MKENT(ramdisk, 0, 1, (void *)BOOTM_STATE_RAMDISK, "", ""),
+#endif
+#ifdef CONFIG_OF_LIBFDT
+	U_BOOT_CMD_MKENT(fdt, 0, 1, (void *)BOOTM_STATE_FDT, "", ""),
+#endif
+	U_BOOT_CMD_MKENT(bdt, 0, 1, (void *)BOOTM_STATE_OS_BD_T, "", ""),
+	U_BOOT_CMD_MKENT(cmdline, 0, 1, (void *)BOOTM_STATE_OS_CMDLINE, "", ""),
+	U_BOOT_CMD_MKENT(prep, 0, 1, (void *)BOOTM_STATE_OS_PREP, "", ""),
+	U_BOOT_CMD_MKENT(go, 0, 1, (void *)BOOTM_STATE_OS_GO, "", ""),
+};
+
+int do_bootm_subcommand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int ret = 0;
+	int state;
+	cmd_tbl_t *c;
+	boot_os_fn *boot_fn;
+
+	c = find_cmd_tbl(argv[1], &cmd_bootm_sub[0], ARRAY_SIZE(cmd_bootm_sub));
+
+	if (c) {
+		state = (int)c->cmd;
+
+		/* treat start special since it resets the state machine */
+		if (state == BOOTM_STATE_START) {
+			argc--;
+			argv++;
+			return bootm_start(cmdtp, flag, argc, argv);
+		}
+	}
+	/* Unrecognized command */
+	else {
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	if (images.state >= state) {
+		printf ("Trying to execute a command out of order\n");
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	images.state |= state;
+	boot_fn = boot_os[images.os.os];
+
+	switch (state) {
+		ulong load_end;
+		case BOOTM_STATE_START:
+			/* should never occur */
+			break;
+		case BOOTM_STATE_LOADOS:
+			ret = bootm_load_os(images.os, &load_end, 0);
+			if (ret)
+				return ret;
+
+			lmb_reserve(&images.lmb, images.os.load,
+					(load_end - images.os.load));
+			break;
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+		case BOOTM_STATE_RAMDISK:
+		{
+			ulong rd_len = images.rd_end - images.rd_start;
+			char str[17];
+
+			ret = boot_ramdisk_high(&images.lmb, images.rd_start,
+				rd_len, &images.initrd_start, &images.initrd_end);
+			if (ret)
+				return ret;
+
+			sprintf(str, "%lx", images.initrd_start);
+			setenv("initrd_start", str);
+			sprintf(str, "%lx", images.initrd_end);
+			setenv("initrd_end", str);
+		}
+			break;
+#endif
+#ifdef CONFIG_OF_LIBFDT
+		case BOOTM_STATE_FDT:
+		{
+			ulong bootmap_base = getenv_bootm_low();
+			ret = boot_relocate_fdt(&images.lmb, bootmap_base,
+				&images.ft_addr, &images.ft_len);
+			break;
+		}
+#endif
+		case BOOTM_STATE_OS_CMDLINE:
+			ret = boot_fn(BOOTM_STATE_OS_CMDLINE, argc, argv, &images);
+			if (ret)
+				printf ("cmdline subcommand not supported\n");
+			break;
+		case BOOTM_STATE_OS_BD_T:
+			ret = boot_fn(BOOTM_STATE_OS_BD_T, argc, argv, &images);
+			if (ret)
+				printf ("bdt subcommand not supported\n");
+			break;
+		case BOOTM_STATE_OS_PREP:
+			ret = boot_fn(BOOTM_STATE_OS_PREP, argc, argv, &images);
+			if (ret)
+				printf ("prep subcommand not supported\n");
+			break;
+		case BOOTM_STATE_OS_GO:
+			disable_interrupts();
+			boot_fn(BOOTM_STATE_OS_GO, argc, argv, &images);
+			break;
+	}
+
+	return ret;
+}
+
 /*******************************************************************/
 /* bootm - boot application image from image in memory */
 /*******************************************************************/

@@ -419,6 +535,23 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		relocated = 1;
 	}
 
+	/* determine if we have a sub command */
+	if (argc > 1) {
+		char *endp;
+
+		simple_strtoul(argv[1], &endp, 16);
+		/* endp pointing to NULL means that argv[1] was just a
+		 * valid number, pass it along to the normal bootm processing
+		 *
+		 * If endp is ':' or '#' assume a FIT identifier so pass
+		 * along for normal processing.
+		 *
+		 * Right now we assume the first arg should never be '-'
+		 */
+		if ((*endp != 0) && (*endp != ':') && (*endp != '#'))
+			return do_bootm_subcommand(cmdtp, flag, argc, argv);
+	}
+
 	if (bootm_start(cmdtp, flag, argc, argv))
 		return 1;

@@ -783,6 +916,21 @@ U_BOOT_CMD(
 	"\tUse iminfo command to get the list of existing component\n"
 	"\timages and configurations.\n"
 #endif
+	"\nSub-commands to do part of the bootm sequence.  The sub-commands "
+	"must be\n"
+	"issued in the order below (it's ok to not issue all sub-commands):\n"
+	"\tstart [addr [arg ...]]\n"
+	"\tloados  - load OS image\n"
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+	"\tramdisk - relocate initrd, set env initrd_start/initrd_end\n"
+#endif
+#if defined(CONFIG_OF_LIBFDT)
+	"\tfdt     - relocate flat device tree\n"
+#endif
+	"\tbdt     - OS specific bd_t processing\n"
+	"\tcmdline - OS specific command line processing/setup\n"
+	"\tprep    - OS specific prep before relocation or go\n"
+	"\tgo      - start OS\n"
 );
 
 /*******************************************************************/

@@ -1022,6 +1170,9 @@ static int do_bootm_netbsd (int flag, int argc, char *argv[],
 	char *consdev;
 	char *cmdline;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
 		fit_unsupported_reset ("NetBSD");

@@ -1102,6 +1253,9 @@ static int do_bootm_lynxkdi (int flag, int argc, char *argv[],
 {
 	image_header_t *hdr = &images->legacy_hdr_os_copy;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
 		fit_unsupported_reset ("Lynx");

@@ -1120,6 +1274,9 @@ static int do_bootm_rtems (int flag, int argc, char *argv[],
 {
 	void (*entry_point)(bd_t *);
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
 		fit_unsupported_reset ("RTEMS");

@@ -1149,6 +1306,9 @@ static int do_bootm_vxworks (int flag, int argc, char *argv[],
 {
 	char str[80];
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
 		fit_unsupported_reset ("VxWorks");

@@ -1169,6 +1329,9 @@ static int do_bootm_qnxelf(int flag, int argc, char *argv[],
 	char *local_args[2];
 	char str[16];
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
 		fit_unsupported_reset ("QNX");

@@ -1191,6 +1354,9 @@ static int do_bootm_integrity (int flag, int argc, char *argv[],
 {
 	void (*entry_point)(void);
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #if defined(CONFIG_FIT)
 	if (!images->legacy_hdr_valid) {
 		fit_unsupported_reset ("INTEGRITY");

include/image.h +19 -1

index 82e6345..557e72a 100644
@@ -228,6 +228,7 @@ typedef struct bootm_headers {
 #endif
 #endif
 
+#ifndef USE_HOSTCC
 	image_info_t	os;		/* os image info */
 	ulong		ep;		/* entry point of OS */

@@ -238,8 +239,25 @@ typedef struct bootm_headers {
 #endif
 	ulong		ft_len;		/* length of flat device tree */
 
+	ulong		initrd_start;
+	ulong		initrd_end;
+	ulong		cmdline_start;
+	ulong		cmdline_end;
+	bd_t		*kbd;
+#endif
+
 	int		verify;		/* getenv("verify")[0] != 'n' */
-	int		valid;		/* set to 1 if we've set values in the header */
+
+#define	BOOTM_STATE_START	(0x00000001)
+#define	BOOTM_STATE_LOADOS	(0x00000002)
+#define	BOOTM_STATE_RAMDISK	(0x00000004)
+#define	BOOTM_STATE_FDT		(0x00000008)
+#define	BOOTM_STATE_OS_CMDLINE	(0x00000010)
+#define	BOOTM_STATE_OS_BD_T	(0x00000020)
+#define	BOOTM_STATE_OS_PREP	(0x00000040)
+#define	BOOTM_STATE_OS_GO	(0x00000080)
+	int		state;
+
 #ifndef USE_HOSTCC
 	struct lmb	lmb;		/* for memory mgmt */
 #endif

lib_arm/bootm.c +3 -0

index 772fa7f..8e264ce 100644
@@ -67,6 +67,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	char *commandline = getenv ("bootargs");
 #endif
 
+	if ((flag != 0) || (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	theKernel = (void (*)(int, int, uint))images->ep;
 
 	s = getenv ("machid");

lib_avr32/bootm.c +3 -0

index 35240e2..556e3ea 100644
@@ -178,6 +178,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	char	*commandline = getenv("bootargs");
 	int	ret;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	theKernel = (void *)images->ep;
 
 	show_boot_progress (15);

lib_blackfin/bootm.c +3 -0

index 9938ae5..195eb9c 100644
@@ -36,6 +36,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	int	(*appl) (char *cmdline);
 	char	*cmdline;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 #ifdef SHARED_RESOURCES
 	swap_to(FLASH);
 #endif

lib_i386/bootm.c +3 -0

index 613e339..ea19b3d 100644
@@ -40,6 +40,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	size_t		len;
 #endif
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	if (images->legacy_hdr_valid) {
 		hdr = images->legacy_hdr_os;
 		if (image_check_type (hdr, IH_TYPE_MULTI)) {

lib_m68k/bootm.c +3 -0

index c52dd2f..0798e07 100644
@@ -76,6 +76,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	void  (*kernel) (bd_t *, ulong, ulong, ulong, ulong);
 	struct lmb *lmb = &images->lmb;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	bootmap_base = getenv_bootm_low();
 
 	/* allocate space and init command line */

lib_microblaze/bootm.c +3 -0

index 52fe068..e97aae6 100644
@@ -38,6 +38,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	void	(*theKernel) (char *);
 	char	*commandline = getenv ("bootargs");
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	theKernel = (void (*)(char *))images->ep;
 
 	show_boot_progress (15);

lib_mips/bootm.c +3 -0

index dced28c..3db22ea 100644
@@ -50,6 +50,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	char	env_buf[12];
 	char	*cp;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	/* find kernel entry point */
 	theKernel = (void (*)(int, char **, char **, int *))images->ep;

lib_nios2/bootm.c +3 -0

index 34f5b8f..53fd569 100644
@@ -29,6 +29,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 {
 	void (*kernel)(void) = (void (*)(void))images->ep;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	/* For now we assume the Microtronix linux ... which only
 	 * needs to be called ;-)
 	 */

lib_ppc/bootm.c +3 -0

index 1f3501a..6c9cf9e 100644
@@ -117,6 +117,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	char	*of_flat_tree = images->ft_addr;
 #endif
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	kernel = (void (*)(bd_t *, ulong, ulong, ulong,
 			   ulong, ulong, ulong))images->ep;

lib_sh/bootm.c +3 -0

index 078a24d..ae1f869 100644
@@ -56,6 +56,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	unsigned long size = images->ep - (unsigned long)param;
 	char *bootargs = getenv("bootargs");
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	/* Setup parameters */
 	memset(param, 0, size);	/* Clear zero page */
 	strcpy(cmdline, bootargs);

lib_sparc/bootm.c +3 -0

index 565b41c..4975759 100644
@@ -102,6 +102,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t * images)
 	struct lmb *lmb = &images->lmb;
 	int ret;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
 	/* Get virtual address of kernel start */
 	linux_hdr = (void *)images->os.load;

Signature · 1 line

1.5.5.1

Kumar Gala

author

2008-10-20 16:28 UTC #1 lore raw

PATCH 2/2 bootm: support subcommands in linux ppc bootm

Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm.

Signed-off-by Kumar Gala <[email protected]>

---
 lib_ppc/bootm.c |  271 +++++++++++++++++++++++++++++++++++--------------------
 1 files changed, 175 insertions(+), 96 deletions(-)

lib_ppc/bootm.c +175 ~~-96~~

index 6c9cf9e..fce4eff 100644
@@ -47,6 +47,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 extern ulong get_effective_memsize(void);
 static ulong get_sp (void);
 static void set_clocks_in_mhz (bd_t *kbd);

@@ -55,6 +56,74 @@ static void set_clocks_in_mhz (bd_t *kbd);
 #define CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE	(768*1024*1024)
 #endif
 
+static void boot_jump_linux(bootm_headers_t *images)
+{
+	void	(*kernel)(bd_t *, ulong r4, ulong r5, ulong r6,
+			  ulong r7, ulong r8, ulong r9);
+#ifdef CONFIG_OF_LIBFDT
+	char *of_flat_tree = images->ft_addr;
+#endif
+
+	kernel = (void (*)(bd_t *, ulong, ulong, ulong,
+			   ulong, ulong, ulong))images->ep;
+	debug ("## Transferring control to Linux (at address %08lx) ...\n",
+		(ulong)kernel);
+
+	show_boot_progress (15);
+
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && !defined(CONFIG_E500)
+	unlock_ram_in_cache();
+#endif
+
+#if defined(CONFIG_OF_LIBFDT)
+	if (of_flat_tree) {	/* device tree; boot new style */
+		/*
+		 * Linux Kernel Parameters (passing device tree):
+		 *   r3: pointer to the fdt
+		 *   r4: 0
+		 *   r5: 0
+		 *   r6: epapr magic
+		 *   r7: size of IMA in bytes
+		 *   r8: 0
+		 *   r9: 0
+		 */
+#if defined(CONFIG_85xx) || defined(CONFIG_440)
+ #define EPAPR_MAGIC	(0x45504150)
+#else
+ #define EPAPR_MAGIC	(0x65504150)
+#endif
+
+		debug ("   Booting using OF flat tree...\n");
+		(*kernel) ((bd_t *)of_flat_tree, 0, 0, EPAPR_MAGIC,
+			   CONFIG_SYS_BOOTMAPSZ, 0, 0);
+		/* does not return */
+	} else
+#endif
+	{
+		/*
+		 * Linux Kernel Parameters (passing board info data):
+		 *   r3: ptr to board info data
+		 *   r4: initrd_start or 0 if no initrd
+		 *   r5: initrd_end - unused if r4 is 0
+		 *   r6: Start of command line string
+		 *   r7: End   of command line string
+		 *   r8: 0
+		 *   r9: 0
+		 */
+		ulong cmd_start = images->cmdline_start;
+		ulong cmd_end = images->cmdline_end;
+		ulong initrd_start = images->initrd_start;
+		ulong initrd_end = images->initrd_end;
+		bd_t *kbd = images->kbd;
+
+		debug ("   Booting using board info...\n");
+		(*kernel) (kbd, initrd_start, initrd_end,
+			   cmd_start, cmd_end, 0, 0);
+		/* does not return */
+	}
+	return ;
+}
+
 void arch_lmb_reserve(struct lmb *lmb)
 {
 	phys_size_t bootm_size;

@@ -99,153 +168,163 @@ void arch_lmb_reserve(struct lmb *lmb)
 	return ;
 }
 
-__attribute__((noinline))
-int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+static void boot_prep_linux(void)
 {
-	ulong	initrd_start, initrd_end;
-	ulong	rd_len;
-
-	ulong	cmd_start, cmd_end, bootmap_base;
-	bd_t	*kbd;
-	void	(*kernel)(bd_t *, ulong r4, ulong r5, ulong r6,
-			  ulong r7, ulong r8, ulong r9);
-	int	ret;
-	ulong	of_size = images->ft_len;
-	struct lmb *lmb = &images->lmb;
-
-#if defined(CONFIG_OF_LIBFDT)
-	char	*of_flat_tree = images->ft_addr;
+#if (CONFIG_NUM_CPUS > 1)
+	/* if we are MP make sure to flush the dcache() to any changes are made
+	 * visibile to all other cores */
+        flush_dcache();
 #endif
+	return ;
+}
 
-	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
-		return 1;
-
-	kernel = (void (*)(bd_t *, ulong, ulong, ulong,
-			   ulong, ulong, ulong))images->ep;
+static int boot_cmdline_linux(bootm_headers_t *images)
+{
+	ulong bootmap_base = getenv_bootm_low();
+	ulong of_size = images->ft_len;
+	struct lmb *lmb = &images->lmb;
+	ulong *cmd_start = &images->cmdline_start;
+	ulong *cmd_end = &images->cmdline_end;
 
-	bootmap_base = getenv_bootm_low();
+	int ret = 0;
 
 	if (!of_size) {
 		/* allocate space and init command line */
-		ret = boot_get_cmdline (lmb, &cmd_start, &cmd_end, bootmap_base);
+		ret = boot_get_cmdline (lmb, cmd_start, cmd_end, bootmap_base);
 		if (ret) {
 			puts("ERROR with allocation of cmdline\n");
-			goto error;
+			return ret;
 		}
+	}
+
+	return ret;
+}
+
+static int boot_bd_t_linux(bootm_headers_t *images)
+{
+	ulong bootmap_base = getenv_bootm_low();
+	ulong of_size = images->ft_len;
+	struct lmb *lmb = &images->lmb;
+	bd_t **kbd = &images->kbd;
+
+	int ret = 0;
 
+	if (!of_size) {
 		/* allocate space for kernel copy of board info */
-		ret = boot_get_kbd (lmb, &kbd, bootmap_base);
+		ret = boot_get_kbd (lmb, kbd, bootmap_base);
 		if (ret) {
 			puts("ERROR with allocation of kernel bd\n");
-			goto error;
+			return ret;
 		}
-		set_clocks_in_mhz(kbd);
+		set_clocks_in_mhz(*kbd);
 	}
 
+	return ret;
+}
+
+static int boot_body_linux(bootm_headers_t *images)
+{
+	ulong rd_len, bootmap_base = getenv_bootm_low();
+	ulong of_size = images->ft_len;
+	struct lmb *lmb = &images->lmb;
+	ulong *initrd_start = &images->initrd_start;
+	ulong *initrd_end = &images->initrd_end;
+#if defined(CONFIG_OF_LIBFDT)
+	char **of_flat_tree = &images->ft_addr;
+#endif
+
+	int ret;
+
+	/* allocate space and init command line */
+	ret = boot_cmdline_linux(images);
+	if (ret)
+		return ret;
+
+	/* allocate space for kernel copy of board info */
+	ret = boot_bd_t_linux(images);
+	if (ret)
+		return ret;
+
 	rd_len = images->rd_end - images->rd_start;
+	ret = boot_ramdisk_high (lmb, images->rd_start, rd_len, initrd_start, initrd_end);
+	if (ret)
+		return ret;
 
 #if defined(CONFIG_OF_LIBFDT)
-	ret = boot_relocate_fdt(lmb, bootmap_base, &of_flat_tree, &of_size);
+	ret = boot_relocate_fdt(lmb, bootmap_base, of_flat_tree, &of_size);
 	if (ret)
-		goto error;
+		return ret;
 
 	/*
 	 * Add the chosen node if it doesn't exist, add the env and bd_t
 	 * if the user wants it (the logic is in the subroutines).
 	 */
 	if (of_size) {
-		if (fdt_chosen(of_flat_tree, 1) < 0) {
+		if (fdt_chosen(*of_flat_tree, 1) < 0) {
 			puts ("ERROR: ");
 			puts ("/chosen node create failed");
 			puts (" - must RESET the board to recover.\n");
-			goto error;
+			return -1;
 		}
 #ifdef CONFIG_OF_BOARD_SETUP
 		/* Call the board-specific fixup routine */
-		ft_board_setup(of_flat_tree, gd->bd);
+		ft_board_setup(*of_flat_tree, gd->bd);
 #endif
-	}
 
-	/* Fixup the fdt memreserve now that we know how big it is */
-	if (of_flat_tree) {
 		/* Delete the old LMB reservation */
-		lmb_free(lmb, (phys_addr_t)(u32)of_flat_tree,
-				(phys_size_t)fdt_totalsize(of_flat_tree));
+		lmb_free(lmb, (phys_addr_t)(u32)*of_flat_tree,
+				(phys_size_t)fdt_totalsize(*of_flat_tree));
 
-		ret = fdt_resize(of_flat_tree);
+		ret = fdt_resize(*of_flat_tree);
 		if (ret < 0)
-			goto error;
+			return ret;
 		of_size = ret;
 
-		if ((of_flat_tree) && (initrd_start && initrd_end))
+		if (*initrd_start && *initrd_end)
 			of_size += FDT_RAMDISK_OVERHEAD;
 		/* Create a new LMB reservation */
-		lmb_reserve(lmb, (ulong)of_flat_tree, of_size);
+		lmb_reserve(lmb, (ulong)*of_flat_tree, of_size);
+
+		/* fixup the initrd now that we know where it should be */
+		if (*initrd_start && *initrd_end)
+			fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
 	}
 #endif	/* CONFIG_OF_LIBFDT */
+	return 0;
+}
 
-	ret = boot_ramdisk_high (lmb, images->rd_start, rd_len, &initrd_start, &initrd_end);
-	if (ret)
-		goto error;
-
-#if defined(CONFIG_OF_LIBFDT)
-	/* fixup the initrd now that we know where it should be */
-	if ((of_flat_tree) && (initrd_start && initrd_end))
-		fdt_initrd(of_flat_tree, initrd_start, initrd_end, 1);
-#endif
-	debug ("## Transferring control to Linux (at address %08lx) ...\n",
-		(ulong)kernel);
+__attribute__((noinline))
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+{
+	int	ret;
 
-	show_boot_progress (15);
+	if (flag & BOOTM_STATE_OS_CMDLINE) {
+		boot_cmdline_linux(images);
+		return 0;
+	}
 
-#if defined(CONFIG_SYS_INIT_RAM_LOCK) && !defined(CONFIG_E500)
-	unlock_ram_in_cache();
-#endif
+	if (flag & BOOTM_STATE_OS_BD_T) {
+		boot_bd_t_linux(images);
+		return 0;
+	}
 
-#if defined(CONFIG_OF_LIBFDT)
-	if (of_flat_tree) {	/* device tree; boot new style */
-		/*
-		 * Linux Kernel Parameters (passing device tree):
-		 *   r3: pointer to the fdt
-		 *   r4: 0
-		 *   r5: 0
-		 *   r6: epapr magic
-		 *   r7: size of IMA in bytes
-		 *   r8: 0
-		 *   r9: 0
-		 */
-#if defined(CONFIG_85xx) || defined(CONFIG_440)
- #define EPAPR_MAGIC	(0x45504150)
-#else
- #define EPAPR_MAGIC	(0x65504150)
-#endif
+	if (flag & BOOTM_STATE_OS_PREP) {
+		boot_prep_linux();
+		return 0;
+	}
 
-		debug ("   Booting using OF flat tree...\n");
-		(*kernel) ((bd_t *)of_flat_tree, 0, 0, EPAPR_MAGIC,
-			   CONFIG_SYS_BOOTMAPSZ, 0, 0);
-		/* does not return */
-	} else
-#endif
-	{
-		/*
-		 * Linux Kernel Parameters (passing board info data):
-		 *   r3: ptr to board info data
-		 *   r4: initrd_start or 0 if no initrd
-		 *   r5: initrd_end - unused if r4 is 0
-		 *   r6: Start of command line string
-		 *   r7: End   of command line string
-		 *   r8: 0
-		 *   r9: 0
-		 */
-		debug ("   Booting using board info...\n");
-		(*kernel) (kbd, initrd_start, initrd_end,
-			   cmd_start, cmd_end, 0, 0);
-		/* does not return */
+	if (flag & BOOTM_STATE_OS_GO) {
+		boot_jump_linux(images);
+		return 0;
 	}
-	return 1;
 
-error:
-	return 1;
+	boot_prep_linux();
+	ret = boot_body_linux(images);
+	if (ret)
+		return ret;
+	boot_jump_linux(images);
+
+	return 0;
 }
 
 static ulong get_sp (void)

Signature · 1 line

1.5.5.1

Wolfgang Denk

2008-10-21 19:30 UTC #2 lore raw

PATCH 1/2 bootm: Add subcommands

In reply to Kumar Gala

Dear Kumar Gala,

Quoted 11 lines · In message <[email protected]> you…

Add the ability to break the steps of the bootm command into several
subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.
This allows us to do things like manipulate device trees before they are passed to a booting kernel or setup memory for a secondary core in multicore situations.
Not all OS types support all subcommands (currently only start, loados, ramdisk, fdt, and go are supported).
Signed-off-by Kumar Gala <[email protected]>

This looks mostly OK to me, but I haven't actually tested any of this code yet - can you please comment to what extend you tested it?

Quoted 2 lines

common/cmd_bootm.c +0 -0

...

common/cmd_bootm.c static int do_bootm_netbsd (int flag, int argc, char *argv[], · line 1175

Quoted 7 lines

common/cmd_bootm.c +3 -0

@@ -1022,6 +1170,9 @@ static int do_bootm_netbsd (int flag, int argc, char *argv[],
 	char *consdev;
 	char *cmdline;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+

This is a test that repeats quite often... Maybe e can optimize this as

	if ((flag ^ BOOTM_STATE_OS_GO) != 0)
		return 1;

Best regards,

Wolfgang Denk

Signature · 6 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"More software projects have gone awry for lack of calendar time than
for all other causes combined."
                         - Fred Brooks, Jr., _The Mythical Man Month_

Kumar Gala

author

2008-10-21 22:22 UTC #3 lore raw

PATCH 1/2 bootm: Add subcommands

Quoted 11 lines · Wolfgang Denk

Dear Kumar Gala,
In message <[email protected]
Quoted 8 lines
you wrote:
Add the ability to break the steps of the bootm command into several
subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.
This allows us to do things like manipulate device trees before they are passed to a booting kernel or setup memory for a secondary core in multicore situations.

Quoted 8 lines

Quoted 5 lines
Not all OS types support all subcommands (currently only start, loados,
ramdisk, fdt, and go are supported).
Signed-off-by Kumar Gala <[email protected]>
This looks mostly OK to me, but I haven't actually tested any of this code yet - can you please comment to what extend you tested it?

I've tested this on FSL 85xx HW. I'm able to boot using a sequence of bootm subcommands + a few other commands as well as plain old bootm.

Quoted 15 lines

Quoted 2 lines
common/cmd_bootm.c +0 -0
...
common/cmd_bootm.c static int do_bootm_netbsd (int flag, int · line 1176
Quoted 8 lines
common/cmd_bootm.c +3 -0
@@ -1022,6 +1170,9 @@ static int do_bootm_netbsd (int flag, int  
 argc, char *argv[],
 	char *consdev;
 	char *cmdline;
 
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
This is a test that repeats quite often... Maybe e can optimize this as

Quoted 2 lines

	if ((flag ^ BOOTM_STATE_OS_GO) != 0)
		return 1;

Hmm, this isn't equivalent:

0 ^ BOOTM_STATE_OS_GO => BOOTM_STATE_OS_GO
BOOTM_STATE_OS_GO != 0
return 1.

- k

Jerry Van Baren

2008-10-22 11:32 UTC #4 lore raw

PATCH 1/2 bootm: Add subcommands

Quoted 17 lines · Kumar Gala

Quoted 15 lines · Wolfgang Denk
Dear Kumar Gala,
In message <[email protected]
Quoted 12 lines
you wrote:
Add the ability to break the steps of the bootm command into several
subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.
This allows us to do things like manipulate device trees before they are passed to a booting kernel or setup memory for a secondary core in multicore situations.
Not all OS types support all subcommands (currently only start, loados,
ramdisk, fdt, and go are supported).

Quoted 6 lines

Quoted 3 lines
Quoted 1 line
Signed-off-by Kumar Gala <[email protected]>
This looks mostly OK to me, but I haven't actually tested any of this code yet - can you please comment to what extend you tested it?
I've tested this on FSL 85xx HW. I'm able to boot using a sequence of bootm subcommands + a few other commands as well as plain old bootm.

Ditto for the MPC8360.

Best regards,
gvb

Jerry Van Baren

2008-10-21 19:44 UTC #5 lore raw

PATCH 1/2 bootm: Add subcommands

In reply to Kumar Gala

Quoted 11 lines · Kumar Gala

Add the ability to break the steps of the bootm command into several
subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.
This allows us to do things like manipulate device trees before they are passed to a booting kernel or setup memory for a secondary core in multicore situations.
Not all OS types support all subcommands (currently only start, loados, ramdisk, fdt, and go are supported).
Signed-off-by Kumar Gala <[email protected]>

Hi Kumar,

I've been hacking at cmd_bootm.c and image.c. The direction I'm hacking in is:
* Move boot_* stuff from image.c into cmd_bootm.c
- Calling out to another file to a function unused in that file? Ugly.
* Move the FIT stuff out of image.c into a new file fit_image.c
- The resulting files are more cohesive and less BIG.
* Move the im* commands out of cmd_bootm.c into a new file cmd_image.c
- At one time, I was of the opinion that "bootm (loados|ramdisk|fdt)" should be "ldimage (os|ramdisk|fdt)". I'm less sure of myself, but have not totally discarded the opinion.
- Looking in cmd_bootm.c for im* commands is rather unintuitive.

My intent is to do this hacking based on your bootm subcommand changes, so we can do a two-step cleanup.

Do you have a git repo I can clone rather than trying to keep up with the master repo + your patches? My tracking of your work is falling apart. I see you have an out-of-date repo on git.kernel.org, can you update that perhaps?

Thanks,
gvb

Wolfgang Denk

2008-10-21 19:50 UTC #6 lore raw

PATCH 1/2 bootm: Add subcommands

Dear Jerry Van Baren,

Quoted 5 lines · In message <[email protected]> you wrote:

Do you have a git repo I can clone rather than trying to keep up with the master repo + your patches? My tracking of your work is falling apart. I see you have an out-of-date repo on git.kernel.org, can you update that perhaps?

If it helps, we can use a branch in u-boot-testing for this.

Best regards,

Wolfgang Denk

Signature · 4 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Objects in mirror are closer than they appear.

Jerry Van Baren

2008-10-21 19:51 UTC #7 lore raw

PATCH 1/2 bootm: Add subcommands

Quoted 8 lines · Wolfgang Denk

Dear Jerry Van Baren,
Quoted 4 lines · In message <[email protected]> you wrote:
Do you have a git repo I can clone rather than trying to keep up with the master repo + your patches? My tracking of your work is falling apart. I see you have an out-of-date repo on git.kernel.org, can you update that perhaps?

Quoted 5 lines

If it helps, we can use a branch in u-boot-testing for this.
Best regards,
Wolfgang Denk

Sounds good to me.

Thanks,
gvb

Wolfgang Denk

2008-10-21 20:05 UTC #8 lore raw

PATCH 1/2 bootm: Add subcommands

Dear Jerry Van Baren,

Quoted 2 lines · In message <[email protected]> you wrote:

Quoted 2 lines
If it helps, we can use a branch in u-boot-testing for this.

...

Quoted 1 line

Sounds good to me.

Please just drop me a note which patches (in which versions) should go in. I kind of lost track...

Best regards,

Wolfgang Denk

Signature · 6 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"That unit is a woman."
"A mass of conflicting impulses."
	-- Spock and Nomad, "The Changeling", stardate 3541.9

Jerry Van Baren

2008-10-21 20:07 UTC #9 lore raw

PATCH 1/2 bootm: Add subcommands

Quoted 5 lines · Wolfgang Denk

Dear Jerry Van Baren,
Quoted 1 line · In message <[email protected]> you wrote:
Quoted 1 line
If it helps, we can use a branch in u-boot-testing for this.
...

Quoted 8 lines

Quoted 1 line
Sounds good to me.
Please just drop me a note which patches (in which versions) should go in. I kind of lost track...
Best regards,
Wolfgang Denk

Dear Kumar Gala,

I kind of lost track too. :-/

gvb

Kumar Gala

author

2008-10-21 23:04 UTC #10 lore raw

PATCH 1/2 bootm: Add subcommands

In reply to Jerry Van Baren

Quoted 13 lines · Jerry Van Baren

I've been hacking at cmd_bootm.c and image.c. The direction I'm hacking in is:
* Move boot_* stuff from image.c into cmd_bootm.c
- Calling out to another file to a function unused in that file?
Ugly.
* Move the FIT stuff out of image.c into a new file fit_image.c
- The resulting files are more cohesive and less BIG.
* Move the im* commands out of cmd_bootm.c into a new file cmd_image.c
- At one time, I was of the opinion that "bootm (loados|ramdisk|fdt)" should be "ldimage (os|ramdisk|fdt)". I'm less sure of myself, but have not totally discarded the opinion.
- Looking in cmd_bootm.c for im* commands is rather unintuitive.

these all sound like good things. I've posted a "clean" patchset for Wolfgang to apply to 'master' or 'testing'

- k

Jerry Van Baren

2008-10-22 11:35 UTC #11 lore raw

PATCH 1/2 bootm: Add subcommands

Quoted 16 lines · Kumar Gala

Quoted 12 lines · Jerry Van Baren
I've been hacking at cmd_bootm.c and image.c. The direction I'm hacking in is:
* Move boot_* stuff from image.c into cmd_bootm.c
- Calling out to another file to a function unused in that file? Ugly.
* Move the FIT stuff out of image.c into a new file fit_image.c
- The resulting files are more cohesive and less BIG.
* Move the im* commands out of cmd_bootm.c into a new file cmd_image.c
- At one time, I was of the opinion that "bootm (loados|ramdisk|fdt)" should be "ldimage (os|ramdisk|fdt)". I'm less sure of myself, but have not totally discarded the opinion.
- Looking in cmd_bootm.c for im* commands is rather unintuitive.

Quoted 4 lines

these all sound like good things. I've posted a "clean" patchset for Wolfgang to apply to 'master' or 'testing'
- k

Thanks, that was helpful. I cloned the testing branch and am hacking merrily.

gvb