libsensors: Add support for current sensors
PATCH 2/2 libsensors: Add support for current sensors
Add support for current sensors.
---
The code for function print_chip_curr() is duplicated directly from print_chip_in() with IN subfeature names replaced by their CURR counterparts and V changed to A.
Applies on top of the previous patch. I'd appreciate review and testing of this patch. Vincent, this should show you the current values you were missing so far.
doc/libsensors-API.txt | 9 ++++++ lib/sensors.h | 9 ++++++ lib/sysfs.c | 16 ++++++++++- prog/sensors/chips.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 102 insertions(+), 1 deletion(-)
lib/sensors.h +9 -0
@@ -134,6 +134,7 @@ typedef enum sensors_feature_type {SENSORS_FEATURE_TEMP =0x02 ,SENSORS_FEATURE_POWER =0x03 ,SENSORS_FEATURE_ENERGY =0x04 , +SENSORS_FEATURE_CURR =0x05 ,SENSORS_FEATURE_VID =0x10 ,SENSORS_FEATURE_BEEP_ENABLE =0x18 , SENSORS_FEATURE_UNKNOWN = INT_MAX,
@@ -182,6 +183,14 @@ typedef enum sensors_subfeature_type {SENSORS_SUBFEATURE_ENERGY_INPUT =SENSORS_FEATURE_ENERGY <<8 , +SENSORS_SUBFEATURE_CURR_INPUT =SENSORS_FEATURE_CURR <<8 , +SENSORS_SUBFEATURE_CURR_MIN , +SENSORS_SUBFEATURE_CURR_MAX , +SENSORS_SUBFEATURE_CURR_ALARM = (SENSORS_FEATURE_CURR <<8 ) |0x80 , +SENSORS_SUBFEATURE_CURR_MIN_ALARM , +SENSORS_SUBFEATURE_CURR_MAX_ALARM , +SENSORS_SUBFEATURE_CURR_BEEP , +SENSORS_SUBFEATURE_VID =SENSORS_FEATURE_VID <<8 , SENSORS_SUBFEATURE_BEEP_ENABLE = SENSORS_FEATURE_BEEP_ENABLE << 8,
lib/sysfs.c +15 -1
@@ -138,7 +138,7 @@ char sensors_sysfs_mount[NAME_MAX];#define MAX_SENSORS_PER_TYPE 20#define MAX_SUBFEATURES 8 -#define MAX_SENSOR_TYPES 5 +#define MAX_SENSOR_TYPES 6/* Room for all 5 types (in, fan, temp, power, energy) with all their subfeatures + VID + misc features */ #define ALL_POSSIBLE_SUBFEATURES \
@@ -153,6 +153,7 @@ int get_type_scaling(sensors_subfeature_switch (type &0xFF80 ) {case SENSORS_SUBFEATURE_IN_INPUT :case SENSORS_SUBFEATURE_TEMP_INPUT : +case SENSORS_SUBFEATURE_CURR_INPUT :return 1000 ;case SENSORS_SUBFEATURE_FAN_INPUT :return 1 ;
@@ -184,6 +185,7 @@ char *get_feature_name(sensors_feature_tcase SENSORS_FEATURE_TEMP :case SENSORS_FEATURE_POWER :case SENSORS_FEATURE_ENERGY : +case SENSORS_FEATURE_CURR : underscore =strchr (sfname,'_' ); name =strndup (sfname, underscore - sfname);break ;
@@ -259,6 +261,16 @@ static const struct subfeature_type_matc { NULL, 0 } }; +static const struct subfeature_type_match curr_matches[] = { + {"input" ,SENSORS_SUBFEATURE_CURR_INPUT }, + {"min" ,SENSORS_SUBFEATURE_CURR_MIN }, + {"max" ,SENSORS_SUBFEATURE_CURR_MAX }, + {"alarm" ,SENSORS_SUBFEATURE_CURR_ALARM }, + {"min_alarm" ,SENSORS_SUBFEATURE_CURR_MIN_ALARM }, + {"max_alarm" ,SENSORS_SUBFEATURE_CURR_MAX_ALARM }, + {NULL ,0 } +}; +static const struct subfeature_type_match cpu_matches[] = { {"vid" ,SENSORS_SUBFEATURE_VID }, {NULL ,0 }
@@ -270,6 +282,7 @@ static struct feature_type_match matches { "fan%d%c", fan_matches }, { "cpu%d%c", cpu_matches }, { "power%d%c", power_matches }, + { "curr%d%c", curr_matches }, { "energy%d%c", energy_matches }, };
@@ -360,6 +373,7 @@ static int sensors_read_dynamic_chip(sencase SENSORS_SUBFEATURE_TEMP_INPUT :case SENSORS_SUBFEATURE_POWER_AVERAGE :case SENSORS_SUBFEATURE_ENERGY_INPUT : +case SENSORS_SUBFEATURE_CURR_INPUT : nr--;break ; }
prog/sensors/chips.c +69 -0
81 lines not on this page · raw message
doc/libsensors-API.txt +9 -0
@@ -11,6 +11,15 @@ given new feature. enum sensors_subfeature_type SENSORS_SUBFEATURE_POWER_INPUT enum sensors_subfeature_type SENSORS_SUBFEATURE_POWER_INPUT_HIGHEST enum sensors_subfeature_type SENSORS_SUBFEATURE_POWER_INPUT_LOWEST +* Added support for current sensors + enum sensors_feature_type SENSORS_FEATURE_CURR + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_INPUT + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MIN + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MAX + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_ALARM + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MIN_ALARM + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MAX_ALARM + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_BEEP 0x401 lm-sensors 3.0.2 to 3.0.3 * Added bus type "virtual":
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] [PATCH 2/2] libsensors: Add support for current
Quoted 10 lines · Jean Delvare
Add support for current sensors.
---
The code for functionprint_chip_curr()is duplicated directly fromprint_chip_in()with IN subfeature names replaced by their CURR counterparts and V changed to A.Applies on top of the previous patch. I'd appreciate review and testing of this patch. Vincent, this should show you the current values you were missing so far.
Quoted 6 lines
doc/libsensors-API.txt | 9 ++++++ lib/sensors.h | 9 ++++++ lib/sysfs.c | 16 ++++++++++- prog/sensors/chips.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 102 insertions(+), 1 deletion(-)
I've reviewed this and it looks good.
Regards,
Hans
Quoted 180 lines
lib/sensors.h +9
-0@@ -134,6 +134,7 @@ typedef enum sensors_feature_type {SENSORS_FEATURE_TEMP =0x02 ,SENSORS_FEATURE_POWER =0x03 ,SENSORS_FEATURE_ENERGY =0x04 , +SENSORS_FEATURE_CURR =0x05 ,SENSORS_FEATURE_VID =0x10 ,SENSORS_FEATURE_BEEP_ENABLE =0x18 , SENSORS_FEATURE_UNKNOWN = INT_MAX,@@ -182,6 +183,14 @@ typedef enum sensors_subfeature_type {SENSORS_SUBFEATURE_ENERGY_INPUT =SENSORS_FEATURE_ENERGY <<8 , +SENSORS_SUBFEATURE_CURR_INPUT =SENSORS_FEATURE_CURR <<8 , +SENSORS_SUBFEATURE_CURR_MIN , +SENSORS_SUBFEATURE_CURR_MAX , +SENSORS_SUBFEATURE_CURR_ALARM = (SENSORS_FEATURE_CURR <<8 ) |0x80 , +SENSORS_SUBFEATURE_CURR_MIN_ALARM , +SENSORS_SUBFEATURE_CURR_MAX_ALARM , +SENSORS_SUBFEATURE_CURR_BEEP , +SENSORS_SUBFEATURE_VID =SENSORS_FEATURE_VID <<8 , SENSORS_SUBFEATURE_BEEP_ENABLE = SENSORS_FEATURE_BEEP_ENABLE << 8,lib/sysfs.c +15
-1@@ -138,7 +138,7 @@ char sensors_sysfs_mount[NAME_MAX];#define MAX_SENSORS_PER_TYPE 20#define MAX_SUBFEATURES 8 -#define MAX_SENSOR_TYPES 5 +#define MAX_SENSOR_TYPES 6/* Room for all 5 types (in, fan, temp, power, energy) with all their subfeatures + VID + misc features */ #define ALL_POSSIBLE_SUBFEATURES \@@ -153,6 +153,7 @@ int get_type_scaling(sensors_subfeature_switch (type &0xFF80 ) {case SENSORS_SUBFEATURE_IN_INPUT :case SENSORS_SUBFEATURE_TEMP_INPUT : +case SENSORS_SUBFEATURE_CURR_INPUT :return 1000 ;case SENSORS_SUBFEATURE_FAN_INPUT :return 1 ;@@ -184,6 +185,7 @@ char *get_feature_name(sensors_feature_tcase SENSORS_FEATURE_TEMP :case SENSORS_FEATURE_POWER :case SENSORS_FEATURE_ENERGY : +case SENSORS_FEATURE_CURR : underscore =strchr (sfname,'_' ); name =strndup (sfname, underscore - sfname);break ;@@ -259,6 +261,16 @@ static const struct subfeature_type_matc { NULL, 0 } }; +static const struct subfeature_type_match curr_matches[] = { + {"input" ,SENSORS_SUBFEATURE_CURR_INPUT }, + {"min" ,SENSORS_SUBFEATURE_CURR_MIN }, + {"max" ,SENSORS_SUBFEATURE_CURR_MAX }, + {"alarm" ,SENSORS_SUBFEATURE_CURR_ALARM }, + {"min_alarm" ,SENSORS_SUBFEATURE_CURR_MIN_ALARM }, + {"max_alarm" ,SENSORS_SUBFEATURE_CURR_MAX_ALARM }, + {NULL ,0 } +}; +static const struct subfeature_type_match cpu_matches[] = { {"vid" ,SENSORS_SUBFEATURE_VID }, {NULL ,0 }@@ -270,6 +282,7 @@ static struct feature_type_match matches { "fan%d%c", fan_matches }, { "cpu%d%c", cpu_matches }, { "power%d%c", power_matches }, + { "curr%d%c", curr_matches }, { "energy%d%c", energy_matches }, };@@ -360,6 +373,7 @@ static int sensors_read_dynamic_chip(sencase SENSORS_SUBFEATURE_TEMP_INPUT :case SENSORS_SUBFEATURE_POWER_AVERAGE :case SENSORS_SUBFEATURE_ENERGY_INPUT : +case SENSORS_SUBFEATURE_CURR_INPUT : nr--;break ; }prog/sensors/chips.c +69
-0@@ -578,6 +578,72 @@ static void print_chip_beep_enable(constfree (label); } +static void print_chip_curr (const sensors_chip_name *name, +const sensors_feature *feature, +int label_size) +{ +const sensors_subfeature *sf, *sfmin, *sfmax; +double alarm_max, alarm_min; +char *label; + +if (!(label =sensors_get_label (name, feature))) { +fprintf (stderr,"ERROR: Can't get label of feature %s!\n" , + feature->name); +return ; + } +print_label (label, label_size); +free (label); + + sf =sensors_get_subfeature (name, feature, +SENSORS_SUBFEATURE_CURR_INPUT ); +if (sf) +printf ("%+6.2f A" ,get_value (name, sf)); +else +printf (" N/A" ); + + sfmin =sensors_get_subfeature (name, feature, +SENSORS_SUBFEATURE_CURR_MIN ); + sfmax =sensors_get_subfeature (name, feature, +SENSORS_SUBFEATURE_CURR_MAX ); +if (sfmin && sfmax) +printf (" (min = %+6.2f A, max = %+6.2f A)" , +get_value (name, sfmin), +get_value (name, sfmax)); +else if (sfmin) +printf (" (min = %+6.2f A)" , +get_value (name, sfmin)); +else if (sfmax) +printf (" (max = %+6.2f A)" , +get_value (name, sfmax)); + + sf =sensors_get_subfeature (name, feature, +SENSORS_SUBFEATURE_CURR_ALARM ); + sfmin =sensors_get_subfeature (name, feature, +SENSORS_SUBFEATURE_CURR_MIN_ALARM ); + sfmax =sensors_get_subfeature (name, feature, +SENSORS_SUBFEATURE_CURR_MAX_ALARM ); +if (sfmin || sfmax) { + alarm_max = sfmax ?get_value (name, sfmax) :0 ; + alarm_min = sfmin ?get_value (name, sfmin) :0 ; + +if (alarm_min || alarm_max) { +printf (" ALARM (" ); + +if (alarm_min) +printf ("MIN" ); +if (alarm_max) +printf ("%sMAX" , (alarm_min) ?", " :"" ); + +printf (")" ); + } + }else if (sf) { +printf (" %s" , +get_value (name, sf) ?"ALARM" :"" ); + } + +printf ("\n" ); +} +void print_chip (const sensors_chip_name *name) {const sensors_feature *feature;@@ -609,6 +675,9 @@ void print_chip(const sensors_chip_namecase SENSORS_FEATURE_ENERGY :print_chip_energy (name, feature, label_size);break ; +case SENSORS_FEATURE_CURR : +print_chip_curr (name, feature, label_size); +break ;default :continue ; }doc/libsensors-API.txt +2
-0@@ -11,6 +11,15 @@ given new feature. enum sensors_subfeature_type SENSORS_SUBFEATURE_POWER_INPUT enum sensors_subfeature_type SENSORS_SUBFEATURE_POWER_INPUT_HIGHEST enum sensors_subfeature_type SENSORS_SUBFEATURE_POWER_INPUT_LOWEST +* Added support for current sensors + enum sensors_feature_type SENSORS_FEATURE_CURR
doc/libsensors-API.txt given new feature. · line 25
Quoted 10 lines
doc/libsensors-API.txt +7
-0+ enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_INPUT + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MIN + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MAX + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_ALARM + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MIN_ALARM + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MAX_ALARM + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_BEEP 0x401 lm-sensors 3.0.2 to 3.0.3 * Added bus type "virtual":
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] [PATCH 2/2] libsensors: Add support for current
In reply to Jean Delvare2008/10/22 Hans de Goede <[email protected]>:
Quoted 18 lines
Quoted 10 lines · Jean Delvare
Add support for current sensors.
---
The code for functionprint_chip_curr()is duplicated directly fromprint_chip_in()with IN subfeature names replaced by their CURR counterparts and V changed to A.Applies on top of the previous patch. I'd appreciate review and testing of this patch. Vincent, this should show you the current values you were missing so far.
Quoted 6 lines
doc/libsensors-API.txt | 9 ++++++ lib/sensors.h | 9 ++++++ lib/sysfs.c | 16 ++++++++++- prog/sensors/chips.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 102 insertions(+), 1 deletion(-)
Quoted 6 lines
I've reviewed this and it looks good.
Regards,
Hans
Hi,
I compiled and installed successfuly path 1/2 and patch 2/2 on my system (2.6.27.2). Seems to be working fine. Don't see the difference with the previous version.
JM
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] [PATCH 2/2] libsensors: Add support for current
In reply to Jean DelvareHi Jean-Marc,
Quoted 19 lines · Jean-Marc Spaggiari
2008/10/22 Hans de Goede <[email protected]>:
Quoted 18 lines
Quoted 16 lines · Jean Delvare
Add support for current sensors.
---
The code for functionprint_chip_curr()is duplicated directly fromprint_chip_in()with IN subfeature names replaced by their CURR counterparts and V changed to A.Applies on top of the previous patch. I'd appreciate review and testing of this patch. Vincent, this should show you the current values you were missing so far.
doc/libsensors-API.txt | 9 ++++++ lib/sensors.h | 9 ++++++ lib/sysfs.c | 16 ++++++++++- prog/sensors/chips.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 102 insertions(+), 1 deletion(-)
Quoted 5 lines
Quoted 1 line
I've reviewed this and it looks good.
I compiled and installed successfuly path 1/2 and patch 2/2 on my system (2.6.27.2). Seems to be working fine. Don't see the difference with the previous version.
If you do not have any current sensor nor power sensor on your system, this is the expected result. Thanks for testing!
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Re: [lm-sensors] [PATCH 2/2] libsensors: Add support for current
In reply to Jean DelvareHi Jean,
The patch works well. Thanks a lot.
-sh-2.05b# sensors
mcp3021-i2c-0-4d
Adapter: MPC adapter in0: +0.19 V (min = +0.19 V, max = +0.21 V) curr1: +0.99 A (min = +0.93 A, max = +1.05 A)
mcp3021-i2c-1-4d
Adapter: MPC adapter in0: +0.40 V (min = +0.40 V, max = +0.41 V) curr1: +2.01 A (min = +1.98 A, max = +2.02 A)
Best Regards,
Vincent
-----Original Message-----
From: Jean Delvare [mailto:[email protected]]
Sent: Wednesday, October 22, 2008 7:58 PM
To: LM Sensors
Cc: Hu Mingkai-B21284; Ira Snyder; Darrick J. Wong
Subject: [PATCH 2/2] libsensors: Add support for current sensors
Add support for current sensors.
---
The code for function print_chip_curr() is duplicated directly from print_chip_in() with IN subfeature names replaced by their CURR counterparts and V changed to A.
Applies on top of the previous patch. I'd appreciate review and testing of this patch. Vincent, this should show you the current values you were missing so far.
doc/libsensors-API.txt | 9 ++++++ lib/sensors.h | 9 ++++++ lib/sysfs.c | 16 ++++++++++- prog/sensors/chips.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 102 insertions(+), 1 deletion(-)
--- lm-sensors-3.orig/lib/sensors.h 2008-10-22 12:03:36.000000000
+0200
+++ lm-sensors-3/lib/sensors.h 2008-10-22 12:06:50.000000000 +0200
@@ -134,6 +134,7 @@ typedef enum sensors_feature_type {
SENSORS_FEATURE_TEMP = 0x02,
SENSORS_FEATURE_POWER = 0x03,
SENSORS_FEATURE_ENERGY = 0x04,
+ SENSORS_FEATURE_CURR = 0x05,
SENSORS_FEATURE_VID = 0x10,
SENSORS_FEATURE_BEEP_ENABLE = 0x18,
SENSORS_FEATURE_UNKNOWN = INT_MAX,
@@ -182,6 +183,14 @@ typedef enum sensors_subfeature_type {
SENSORS_SUBFEATURE_ENERGY_INPUT = SENSORS_FEATURE_ENERGY << 8,
+ SENSORS_SUBFEATURE_CURR_INPUT = SENSORS_FEATURE_CURR << 8,
+ SENSORS_SUBFEATURE_CURR_MIN,
+ SENSORS_SUBFEATURE_CURR_MAX,
+ SENSORS_SUBFEATURE_CURR_ALARM = (SENSORS_FEATURE_CURR << 8) |0x80,
+ SENSORS_SUBFEATURE_CURR_MIN_ALARM,
+ SENSORS_SUBFEATURE_CURR_MAX_ALARM,
+ SENSORS_SUBFEATURE_CURR_BEEP,
+
SENSORS_SUBFEATURE_VID = SENSORS_FEATURE_VID << 8,
SENSORS_SUBFEATURE_BEEP_ENABLE = SENSORS_FEATURE_BEEP_ENABLE <<
8,
--- lm-sensors-3.orig/lib/sysfs.c 2008-10-22 12:03:36.000000000
+0200
+++ lm-sensors-3/lib/sysfs.c 2008-10-22 12:06:50.000000000 +0200
@@ -138,7 +138,7 @@ char sensors_sysfs_mount[NAME_MAX];
#define MAX_SENSORS_PER_TYPE 20
#define MAX_SUBFEATURES 8
-#define MAX_SENSOR_TYPES 5
+#define MAX_SENSOR_TYPES 6
/* Room for all 5 types (in, fan, temp, power, energy) with all their
subfeatures + VID + misc features */ #defineALL_POSSIBLE_SUBFEATURES \ @@ -153,6 +153,7 @@ int get_type_scaling(sensors_subfeature_
switch (type & 0xFF80) {
case SENSORS_SUBFEATURE_IN_INPUT:
case SENSORS_SUBFEATURE_TEMP_INPUT:
+ case SENSORS_SUBFEATURE_CURR_INPUT:
return 1000;
case SENSORS_SUBFEATURE_FAN_INPUT:
return 1;
@@ -184,6 +185,7 @@ char *get_feature_name(sensors_feature_t
case SENSORS_FEATURE_TEMP:
case SENSORS_FEATURE_POWER:
case SENSORS_FEATURE_ENERGY:
+ case SENSORS_FEATURE_CURR:
underscore = strchr(sfname, '_');
name = strndup(sfname, underscore - sfname); break;
@@ -259,6 +261,16 @@ static const struct subfeature_type_matc
{ NULL, 0 }
};
+static const struct subfeature_type_match curr_matches[] = {
+ { "input", SENSORS_SUBFEATURE_CURR_INPUT },
+ { "min", SENSORS_SUBFEATURE_CURR_MIN },
+ { "max", SENSORS_SUBFEATURE_CURR_MAX },
+ { "alarm", SENSORS_SUBFEATURE_CURR_ALARM },
+ { "min_alarm", SENSORS_SUBFEATURE_CURR_MIN_ALARM },
+ { "max_alarm", SENSORS_SUBFEATURE_CURR_MAX_ALARM },
+ { NULL, 0 }
+};
+
static const struct subfeature_type_match cpu_matches[] = {
{ "vid", SENSORS_SUBFEATURE_VID },
{ NULL, 0 }
@@ -270,6 +282,7 @@ static struct feature_type_match matches
{ "fan%d%c", fan_matches },
{ "cpu%d%c", cpu_matches },
{ "power%d%c", power_matches },
+ { "curr%d%c", curr_matches },
{ "energy%d%c", energy_matches },
};
@@ -360,6 +373,7 @@ static int sensors_read_dynamic_chip(sen
case SENSORS_SUBFEATURE_TEMP_INPUT:
case SENSORS_SUBFEATURE_POWER_AVERAGE:
case SENSORS_SUBFEATURE_ENERGY_INPUT:
+ case SENSORS_SUBFEATURE_CURR_INPUT:
nr--;
break;
}
--- lm-sensors-3.orig/prog/sensors/chips.c 2008-10-22
12:04:38.000000000 +0200
+++ lm-sensors-3/prog/sensors/chips.c 2008-10-22 12:06:50.000000000
+0200
@@ -578,6 +578,72 @@ static void print_chip_beep_enable(const
free(label);
}
+static void print_chip_curr(const sensors_chip_name *name,
+ const sensors_feature *feature,
+ int label_size)
+{
+ const sensors_subfeature *sf, *sfmin, *sfmax;
+ double alarm_max, alarm_min;
+ char *label;
+
+ if (!(label = sensors_get_label(name, feature))) {
+ fprintf(stderr, "ERROR: Can't get label of feature
%s!\n",
+ feature->name);
+ return;
+ }
+ print_label(label, label_size);
+ free(label);
+
+ sf = sensors_get_subfeature(name, feature,
+ SENSORS_SUBFEATURE_CURR_INPUT);
+ if (sf)
+ printf("%+6.2f A", get_value(name, sf));
+ else
+ printf(" N/A");
+
+ sfmin = sensors_get_subfeature(name, feature,
+ SENSORS_SUBFEATURE_CURR_MIN);
+ sfmax = sensors_get_subfeature(name, feature,
+ SENSORS_SUBFEATURE_CURR_MAX);
+ if (sfmin && sfmax)
+ printf(" (min = %+6.2f A, max = %+6.2f A)",
+ get_value(name, sfmin),
+ get_value(name, sfmax));
+ else if (sfmin)
+ printf(" (min = %+6.2f A)",
+ get_value(name, sfmin));
+ else if (sfmax)
+ printf(" (max = %+6.2f A)",
+ get_value(name, sfmax));
+
+ sf = sensors_get_subfeature(name, feature,
+ SENSORS_SUBFEATURE_CURR_ALARM);
+ sfmin = sensors_get_subfeature(name, feature,
+SENSORS_SUBFEATURE_CURR_MIN_ALARM);
+ sfmax = sensors_get_subfeature(name, feature,
+SENSORS_SUBFEATURE_CURR_MAX_ALARM);
+ if (sfmin || sfmax) {
+ alarm_max = sfmax ? get_value(name, sfmax) : 0;
+ alarm_min = sfmin ? get_value(name, sfmin) : 0;
+
+ if (alarm_min || alarm_max) {
+ printf(" ALARM (");
+
+ if (alarm_min)
+ printf("MIN");
+ if (alarm_max)
+ printf("%sMAX", (alarm_min) ? ", " :
"");
+
+ printf(")");
+ }
+ } else if (sf) {
+ printf(" %s",
+ get_value(name, sf) ? "ALARM" : "");
+ }
+
+ printf("\n");
+}
+
void print_chip(const sensors_chip_name *name) {
const sensors_feature *feature;
@@ -609,6 +675,9 @@ void print_chip(const sensors_chip_name
case SENSORS_FEATURE_ENERGY:
print_chip_energy(name, feature, label_size); break;
+ case SENSORS_FEATURE_CURR:
+ print_chip_curr(name, feature, label_size);
+ break;
default:
continue;
}
--- lm-sensors-3.orig/doc/libsensors-API.txt 2008-10-22
12:06:42.000000000 +0200
+++ lm-sensors-3/doc/libsensors-API.txt 2008-10-22 12:07:02.000000000
+0200
@@ -11,6 +11,15 @@ given new feature.
enum sensors_subfeature_type SENSORS_SUBFEATURE_POWER_INPUT enum sensors_subfeature_type SENSORS_SUBFEATURE_POWER_INPUT_HIGHEST enum sensors_subfeature_type SENSORS_SUBFEATURE_POWER_INPUT_LOWEST
+* Added support for current sensors
+ enum sensors_feature_type SENSORS_FEATURE_CURR + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_INPUT + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MIN + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MAX + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_ALARM + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MIN_ALARM + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_MAX_ALARM + enum sensors_subfeature_type SENSORS_SUBFEATURE_CURR_BEEP
0x401 lm-sensors 3.0.2 to 3.0.3
* Added bus type "virtual":
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors