Skip to contentSkip to conversation

high %CPU values after upgrading to the last stable kernel

DISCUSSION sbs 4 participants 5 messages Oct 22, 2008 – Oct 23, 2008

lore
Share & tools
lore

sbs

author
#0 lore raw

after upgrading from 2.6.16 to 2.6.27 kernel top shows a strange picture of extremely highly %CPU values.

# top -V
        top: procps version 3.2.6
# top
top - 04:24:06 up 7 days,  1:12,  1 user,  load average: 2.28, 2.03, 2.00
Tasks: 183 total,   2 running, 181 sleeping,   0 stopped,   0 zombie
Cpu(s): 36.2% us,  2.4% sy,  0.0% ni, 56.1% id,  4.7% wa,  0.1% hi,  0.5% si
Mem:  12473092k total, 11169060k used,  1304032k free,       16k buffers
Swap:  2048248k total,      636k used,  2047612k free,  1257988k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND

19824 b      20   0 92212  17m 5420 S 4308  0.1   1:39.49 httpd
14396 b      20   0 92716  28m  16m S 3721  0.2  38:47.38 httpd
14024 b      20   0 92376  28m  16m S 2437  0.2  51:49.68 httpd
 7415 b      20   0 96876  40m  24m D 2146  0.3  93:59.72 httpd
 8182 b      20   0 94500  36m  21m S 1997  0.3 111:41.60 httpd
13461 b      20   0 94240  31m  17m S 1439  0.3  48:43.71 httpd
 8466 b      20   0 92036  32m  21m S 1136  0.3 107:37.90 httpd
17620 b      20   0 92660  23m  11m S 1003  0.2  10:55.03 httpd
14025 b      20   0 92000  28m  16m S  720  0.2  51:49.49 httpd
 3808 nobody    20   0 3013m 2.9g  592 S  714 24.7 343030:50 memcached
   10 root     15  -5     0    0    0 S  714  0.0  11881:28 ksoftirqd/3
18487 b      20   0 91416  20m 9572 S  580  0.2   8:29.20 httpd
13252 b      20   0 93408  30m  17m S  580  0.3  45:19.69 httpd
17525 b      20   0 93208  23m  10m S  566  0.2  18:34.40 httpd
14760 b      20   0 93452  28m  15m S  534  0.2  57:34.65 httpd

3804 nobody 20 0 2995m 2.9g 592 S 441 24.6 378908:26 memcached
12209 b 20 0 92312 28m 16m S 279 0.2 63:28.45 httpd

%CPU is 4308 here and it's not the highest value.
i havent seen that on any previous kernel on the same server.

should i upgrade procps or downgrade kernel then to get proper values back? :) or is it a feature of the new kernel?

thank you

#1 lore raw

2008/10/22 sbs <[email protected]>:

Quoted 41 lines

after upgrading from 2.6.16 to 2.6.27 kernel top shows a strange picture of extremely highly %CPU values.

# top -V
       top: procps version 3.2.6
# top
top - 04:24:06 up 7 days,  1:12,  1 user,  load average: 2.28, 2.03, 2.00
Tasks: 183 total,   2 running, 181 sleeping,   0 stopped,   0 zombie
Cpu(s): 36.2% us,  2.4% sy,  0.0% ni, 56.1% id,  4.7% wa,  0.1% hi,  0.5% si
Mem:  12473092k total, 11169060k used,  1304032k free,       16k buffers
Swap:  2048248k total,      636k used,  2047612k free,  1257988k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND

19824 b      20   0 92212  17m 5420 S 4308  0.1   1:39.49 httpd
14396 b      20   0 92716  28m  16m S 3721  0.2  38:47.38 httpd
14024 b      20   0 92376  28m  16m S 2437  0.2  51:49.68 httpd
 7415 b      20   0 96876  40m  24m D 2146  0.3  93:59.72 httpd
 8182 b      20   0 94500  36m  21m S 1997  0.3 111:41.60 httpd
13461 b      20   0 94240  31m  17m S 1439  0.3  48:43.71 httpd
 8466 b      20   0 92036  32m  21m S 1136  0.3 107:37.90 httpd
17620 b      20   0 92660  23m  11m S 1003  0.2  10:55.03 httpd
14025 b      20   0 92000  28m  16m S  720  0.2  51:49.49 httpd
 3808 nobody    20   0 3013m 2.9g  592 S  714 24.7 343030:50 memcached
  10 root     15  -5     0    0    0 S  714  0.0  11881:28 ksoftirqd/3
18487 b      20   0 91416  20m 9572 S  580  0.2   8:29.20 httpd
13252 b      20   0 93408  30m  17m S  580  0.3  45:19.69 httpd
17525 b      20   0 93208  23m  10m S  566  0.2  18:34.40 httpd
14760 b      20   0 93452  28m  15m S  534  0.2  57:34.65 httpd

3804 nobody 20 0 2995m 2.9g 592 S 441 24.6 378908:26 memcached
12209 b 20 0 92312 28m 16m S 279 0.2 63:28.45 httpd

%CPU is 4308 here and it's not the highest value.
i havent seen that on any previous kernel on the same server.

should i upgrade procps or downgrade kernel then to get proper values back? :) or is it a feature of the new kernel?

Quoted 7 lines

thank you
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Hi,

It really depends on what your box is doing at the time you capture the cpu usage.
And it really depends too of your kernel config...

#2 lore raw

On Wed, Oct 22, 2008 at 2:04 PM, Frédéric Weisbecker <[email protected]> wrote:> 2008/10/22 sbs <[email protected]>:>> after upgrading from 2.6.16 to 2.6.27 kernel top shows a strange>> picture of extremely highly %CPU values.>>>> # top -V>> top: procps version 3.2.6>>>>>> # top>> top - 04:24:06 up 7 days, 1:12, 1 user, load average: 2.28, 2.03, 2.00>> Tasks: 183 total, 2 running, 181 sleeping, 0 stopped, 0 zombie>> Cpu(s): 36.2% us, 2.4% sy, 0.0% ni, 56.1% id, 4.7% wa, 0.1% hi, 0.5% si>> Mem: 12473092k total, 11169060k used, 1304032k free, 16k buffers>> Swap: 2048248k total, 636k used, 2047612k free, 1257988k cached>>>> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND>> 19824 b 20 0 92212 17m 5420 S 4308 0.1 1:39.49 httpd>> 14396 b 20 0 92716 28m 16m S 3721 0.2 38:47.38 httpd>> 14024 b 20 0 92376 28m 16m S 2437 0.2 51:49.68 httpd>> 7415 b 20 0 96876 40m 24m D 2146 0.3 93:59.72 httpd>> 8182 b 20 0 94500 36m 21m S 1997 0.3 111:41.60 httpd>> 13461 b 20 0 94240 31m 17m S 1439 0.3 48:43.71 httpd>> 8466 b 20 0 92036 32m 21m S 1136 0.3 107:37.90 httpd>> 17620 b 20 0 92660 23m 11m S 1003 0.2 10:55.03 httpd>> 14025 b 20 0 92000 28m 16m S 720 0.2 51:49.49 httpd>> 3808 nobody 20 0 3013m 2.9g 592 S 714 24.7 343030:50 memcached>> 10 root 15 -5 0 0 0 S 714 0.0 11881:28 ksoftirqd/3>> 18487 b 20 0 91416 20m 9572 S 580 0.2 8:29.20 httpd>> 13252 b 20 0 93408 30m 17m S 580 0.3 45:19.69 httpd>> 17525 b 20 0 93208 23m 10m S 566 0.2 18:34.40 httpd>> 14760 b 20 0 93452 28m 15m S 534 0.2 57:34.65 httpd>> 3804 nobody 20 0 2995m 2.9g 592 S 441 24.6 378908:26 memcached>> 12209 b 20 0 92312 28m 16m S 279 0.2 63:28.45 httpd>>>>>>>> %CPU is 4308 here and it's not the highest value.>> i havent seen that on any previous kernel on the same server.>>>> should i upgrade procps or downgrade kernel then to get proper values back? :)>> or is it a feature of the new kernel?>>>> thank you>>>> Hi,>> It really depends on what your box is doing at the time you capture> the cpu usage.> And it really depends too of your kernel config...
It really shouldn't, we're talking about /proc which is supposed to bea stable userspace interface.
Try upgrading your procps, there's a chance it's just so ancient thatit accidentally got broken. However, if that fixes your problem, thenplease report back with a subject line of "/proc API breakage" orsomesuch, to get the proper attention to the issue.���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m���� ������?�I�

#3 lore raw
Quoted 1 line · On Wednesday 22 October 2008 23:40:54 Ray Lee wrote:

On Wed, Oct 22, 2008 at 2:04 PM, Frédéric Weisbecker <[email protected]>

Quoted 1 line · wrote:
Quoted 1 line

2008/10/22 sbs <[email protected]>:

[snip]

Quoted 11 lines
Quoted 10 lines
Quoted 4 lines

should i upgrade procps or downgrade kernel then to get proper values back? :) or is it a feature of the new kernel?

thank you

Hi,

It really depends on what your box is doing at the time you capture the cpu usage.
And it really depends too of your kernel config...

Quoted 7 lines

It really shouldn't, we're talking about /proc which is supposed to be a stable userspace interface.

Try upgrading your procps, there's a chance it's just so ancient that it accidentally got broken. However, if that fixes your problem, then please report back with a subject line of "/proc API breakage" or somesuch, to get the proper attention to the issue.

This is a known kernel bug that for some reason wasn't fixed before 2.6.27 was released. See http://bugzilla.kernel.org/show_bug.cgi?id=11209 for details.

It would probably be useful if the OP added himself to the CC list, so Peter can get some more details about the box.

Signature · 2 lines
Cheers,
Alistair.
author
#4 lore raw

thank you
will be waiting until it gets fixed

Quoted 34 lines · Alistair John Strachan
Quoted 1 line · On Wednesday 22 October 2008 23:40:54 Ray Lee wrote:

On Wed, Oct 22, 2008 at 2:04 PM, Frédéric Weisbecker <[email protected]>

Quoted 1 line · wrote:
Quoted 1 line

2008/10/22 sbs <[email protected]>:

[snip]

Quoted 11 lines
Quoted 10 lines
Quoted 4 lines

should i upgrade procps or downgrade kernel then to get proper values back? :) or is it a feature of the new kernel?

thank you

Hi,

It really depends on what your box is doing at the time you capture the cpu usage.
And it really depends too of your kernel config...

Quoted 7 lines

It really shouldn't, we're talking about /proc which is supposed to be a stable userspace interface.

Try upgrading your procps, there's a chance it's just so ancient that it accidentally got broken. However, if that fixes your problem, then please report back with a subject line of "/proc API breakage" or somesuch, to get the proper attention to the issue.

This is a known kernel bug that for some reason wasn't fixed before 2.6.27 was released. See http://bugzilla.kernel.org/show_bug.cgi?id=11209 for details.

It would probably be useful if the OP added himself to the CC list, so Peter can get some more details about the box.

--
Cheers,
Alistair.