GPIO: Adding new Xilinx driver
Subsystems (2)
PATCH v3 1/1 GPIO: Adding new Xilinx driver
This driver supports the Xilinx XPS GPIO IP core which has the typical GPIO features.
Signed-off-by Kiran Sutariya <[email protected]>
Signed-off-by Grant Likely <[email protected]>
Signed-off-by John Linn <[email protected]>
---
V2 - Updated based on Anton's comments
V3 - Cleaned up Kconfig badness in patch generation and added Grant's signoff
drivers/gpio/Kconfig | 8 ++ drivers/gpio/Makefile | 1 + drivers/gpio/xilinx_gpio.c | 235 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 244 insertions(+), 0 deletions(-) create mode 100644 drivers/gpio/xilinx_gpio.c
drivers/gpio/Kconfig +8 -0
@@ -65,6 +65,14 @@ config GPIO_SYSFS # put expanders in the right section, in alphabetical order +comment "Memory mapped GPIO expanders:" + +config GPIO_XILINX + bool "Xilinx GPIO support" + depends on PPC_OF + help + Say yes here to support the Xilinx FPGA GPIO device + comment "I2C GPIO expanders:" config GPIO_MAX732X
drivers/gpio/Makefile +1 -0
@@ -10,4 +10,5 @@ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o +obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
drivers/gpio/xilinx_gpio.c new file +235 -0
235 lines not on this page · raw message
Signature · 5 lines
1.5.2.1 This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.