libata updates
PATCH 1/1 libata updates
All bug fixes except for the one-line Promise PCI ID addition to ahci, the zap-magic-numbers prep patch from David Milburn, and Alan's email addr patch.
Please pull from 'upstream-linus' branch of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 41 +++++++++++++++++++++++++---------- drivers/ata/ata_generic.c | 2 +- drivers/ata/ata_piix.c | 2 +- drivers/ata/libata-core.c | 35 +++++++++++++++++------------- drivers/ata/libata-eh.c | 14 +++++++++++- drivers/ata/pata_acpi.c | 2 +- drivers/ata/pata_ali.c | 1 - drivers/ata/pata_amd.c | 1 - drivers/ata/pata_artop.c | 2 +- drivers/ata/pata_atiixp.c | 1 - drivers/ata/pata_cmd640.c | 1 - drivers/ata/pata_cmd64x.c | 2 +- drivers/ata/pata_cs5530.c | 1 - drivers/ata/pata_cs5535.c | 2 +- drivers/ata/pata_cypress.c | 2 +- drivers/ata/pata_efar.c | 2 +- drivers/ata/pata_isapnp.c | 2 +- drivers/ata/pata_it821x.c | 7 ++--- drivers/ata/pata_jmicron.c | 2 +- drivers/ata/pata_legacy.c | 2 +- drivers/ata/pata_marvell.c | 2 +- drivers/ata/pata_mpiix.c | 2 +- drivers/ata/pata_netcell.c | 2 +- drivers/ata/pata_ninja32.c | 44 ++++++++++++++++++++++++++++++-------- drivers/ata/pata_ns87410.c | 1 - drivers/ata/pata_ns87415.c | 2 +- drivers/ata/pata_oldpiix.c | 2 +- drivers/ata/pata_opti.c | 1 - drivers/ata/pata_optidma.c | 1 - drivers/ata/pata_pcmcia.c | 2 +- drivers/ata/pata_pdc202xx_old.c | 2 +- drivers/ata/pata_platform.c | 2 +- drivers/ata/pata_qdi.c | 2 +- drivers/ata/pata_radisys.c | 2 +- drivers/ata/pata_sc1200.c | 2 +- drivers/ata/pata_scc.c | 2 +- drivers/ata/pata_serverworks.c | 1 - drivers/ata/pata_sil680.c | 1 - drivers/ata/pata_sis.c | 2 +- drivers/ata/pata_sl82c105.c | 1 - drivers/ata/pata_triflex.c | 2 +- drivers/ata/pata_via.c | 1 - drivers/ata/pata_winbond.c | 2 +- drivers/ata/sata_sil24.c | 5 ++++ 44 files changed, 130 insertions(+), 80 deletions(-)
Alan Cox (2):
ata: Switch all my stuff to a common address
pata_ninja32: suspend/resume support
David Milburn (2):
libata: ahci enclosure management led sync
libata: ahci enclosure management bit mask
Mark Nelson (1):
ahci: Add support for Promise PDC42819
Ondrej Zary (1):
libata: Fix LBA48 on pata_it821x RAID volumes.
Randy Dunlap (1):
libata: add missing kernel-doc
Tejun Heo (3):
libata: fix device iteration bugs
sata_sil24: configure max read request size to 4k
libata: clear saved xfer_mode and ncq_enabled on device detach
drivers/ata/ahci.c +29 -12
@@ -49,6 +49,17 @@#define DRV_NAME "ahci"#define DRV_VERSION "3.0" +/* Enclosure Management Control */ +#define EM_CTRL_MSG_TYPE 0x000f0000 + +/* Enclosure Management LED Message Type */ +#define EM_MSG_LED_HBA_PORT 0x0000000f +#define EM_MSG_LED_PMP_SLOT 0x0000ff00 +#define EM_MSG_LED_VALUE 0xffff0000 +#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000 +#define EM_MSG_LED_VALUE_OFF 0xfff80000 +#define EM_MSG_LED_VALUE_ON 0x00010000 +static int ahci_skip_host_reset;module_param_named (skip_host_reset, ahci_skip_host_reset, int,0444 );MODULE_PARM_DESC (skip_host_reset,"skip global host reset (0=don't skip, 1=skip)" );
@@ -588,6 +599,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ +/* Promise */ + { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ +/* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
@@ -1220,18 +1234,20 @@ static void ahci_sw_activity_blink(unsigned long arg)struct ahci_em_priv *emp = &pp->em_priv[link->pmp];unsigned long led_message = emp->led_state;u32 activity_led_state; +unsigned long flags; - led_message &=0xffff0000 ; + led_message &=EM_MSG_LED_VALUE ; led_message |= ap->port_no | (link->pmp <<8 );/* check to see if we've had activity. If so, * toggle state of LED and reset timer. If not, * turn LED to desired idle state. */ +spin_lock_irqsave (ap->lock, flags);if (emp->saved_activity != emp->activity) { emp->saved_activity = emp->activity;/* get the current LED state */ - activity_led_state = led_message &0x00010000 ; + activity_led_state = led_message &EM_MSG_LED_VALUE_ON ;if (activity_led_state) activity_led_state =0 ;
@@ -1239,17 +1255,18 @@ static void ahci_sw_activity_blink(unsigned long arg) activity_led_state =1 ;/* clear old state */ - led_message &=0xfff8ffff ; + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY ;/* toggle state */ led_message |= (activity_led_state <<16 );mod_timer (&emp->timer, jiffies +msecs_to_jiffies (100 )); }else {/* switch to idle */ - led_message &=0xfff8ffff ; + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY ;if (emp->blink_policy ==BLINK_OFF ) led_message |= (1 <<16 ); } +spin_unlock_irqrestore (ap->lock, flags);ahci_transmit_led_message (ap, led_message,4 ); }
@@ -1294,7 +1311,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,struct ahci_em_priv *emp;/* get the slot number from the message */ - pmp = (state &0x0000ff00 ) >>8 ; + pmp = (state &EM_MSG_LED_PMP_SLOT ) >>8 ;if (pmp <MAX_SLOTS ) emp = &pp->em_priv[pmp];else
@@ -1319,7 +1336,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, message[0 ] |= (4 <<8 );/* ignore 0:4 of byte zero, fill in port info yourself */ - message[1 ] = ((state &0xfffffff0 ) | ap->port_no); + message[1 ] = ((state & ~EM_MSG_LED_HBA_PORT ) | ap->port_no);/* write message to EM_LOC */ writel (message[0 ], mmio + hpriv->em_loc);
@@ -1362,7 +1379,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, state =simple_strtoul (buf,NULL ,0 );/* get the slot number from the message */ - pmp = (state &0x0000ff00 ) >>8 ; + pmp = (state &EM_MSG_LED_PMP_SLOT ) >>8 ;if (pmp <MAX_SLOTS ) emp = &pp->em_priv[pmp];else
@@ -1373,7 +1390,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,* activity led through em_message */ if (emp->blink_policy) - state &=0xfff8ffff ; + state &= ~EM_MSG_LED_VALUE_ACTIVITY ;return ahci_transmit_led_message (ap, state, size); }
@@ -1392,16 +1409,16 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) link->flags &= ~(ATA_LFLAG_SW_ACTIVITY );/* set the LED to OFF */ - port_led_state &=0xfff80000 ; + port_led_state &=EM_MSG_LED_VALUE_OFF ; port_led_state |= (ap->port_no | (link->pmp <<8 ));ahci_transmit_led_message (ap, port_led_state,4 ); }else { link->flags |=ATA_LFLAG_SW_ACTIVITY ;if (val ==BLINK_OFF ) {/* set LED to ON for idle */ - port_led_state &=0xfff80000 ; + port_led_state &=EM_MSG_LED_VALUE_OFF ; port_led_state |= (ap->port_no | (link->pmp <<8 )); - port_led_state |=0x00010000 ;/* check this */ + port_led_state |=EM_MSG_LED_VALUE_ON ;/* check this */ ahci_transmit_led_message (ap, port_led_state,4 ); } }
@@ -2612,7 +2629,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)u32 em_loc =readl (mmio +HOST_EM_LOC );u32 em_ctl =readl (mmio +HOST_EM_CTL ); - messages = (em_ctl &0x000f0000 ) >>16 ; + messages = (em_ctl &EM_CTRL_MSG_TYPE ) >>16 ;/* we only support LED message type right now */ if ((messages &0x01 ) && (ahci_em_messages ==1 )) {
drivers/ata/ata_generic.c +1 -1
@@ -1,6 +1,6 @@/* * ata_generic.c - Generic PATA/SATA controller driver. -* Copyright 2005 Red Hat Inc <[email protected]>, all rights reserved. +* Copyright 2005 Red Hat Inc, all rights reserved. * * Elements from ide/pci/generic.c * Copyright (C) 2001-2002 Andre Hedrick <[email protected]>
drivers/ata/ata_piix.c +1 -1
@@ -14,7 +14,7 @@* * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <[email protected]> -* Copyright (C) 2003 Red Hat Inc <[email protected]> +* Copyright (C) 2003 Red Hat Inc * * * This program is free software; you can redistribute it and/or modify
drivers/ata/libata-core.c +20 -15
@@ -4156,29 +4156,33 @@ static int cable_is_40wire(struct ata_port *ap)struct ata_link *link;struct ata_device *dev; -/* If the controller thinks we are 40 wire, we are */ +/* If the controller thinks we are 40 wire, we are. */ if (ap->cbl ==ATA_CBL_PATA40 )return 1 ; -/* If the controller thinks we are 80 wire, we are */ + +/* If the controller thinks we are 80 wire, we are. */ if (ap->cbl ==ATA_CBL_PATA80 || ap->cbl ==ATA_CBL_SATA )return 0 ; -/* If the system is known to be 40 wire short cable (eg laptop), -then we allow 80 wire modes even if the drive isn't sure */ + +/* If the system is known to be 40 wire short cable (eg +* laptop), then we allow 80 wire modes even if the drive +* isn't sure. +*/ if (ap->cbl ==ATA_CBL_PATA40_SHORT )return 0 ; -/* If the controller doesn't know we scan - -- Note: We look for all 40 wire detects at this point. -Any 80 wire detect is taken to be 80 wire cable -because -- In many setups only the one drive (slave if present) -will give a valid detect -- If you have a non detect capable drive you don't -want it to colour the choice -*/ + +/* If the controller doesn't know, we scan. +* +* Note: We look for all 40 wire detects at this point. Any +* 80 wire detect is taken to be 80 wire cable because +* - in many setups only the one drive (slave if present) will +* give a valid detect +* - if you have a non detect capable drive you don't want it +* to colour the choice +*/ ata_port_for_each_link (link, ap) {ata_link_for_each_dev (dev, link) { -if (!ata_is_40wire (dev)) +if (ata_dev_enabled (dev) && !ata_is_40wire (dev))return 0 ; } }
@@ -4553,6 +4557,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)/** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure +* @tag: command tag * * LOCKING: * None.
drivers/ata/libata-eh.c +13 -1
@@ -603,6 +603,9 @@ void ata_scsi_error(struct Scsi_Host *host)ata_link_for_each_dev (dev, link) {int devno = dev->devno; +if (!ata_dev_enabled (dev)) +continue ; + ehc->saved_xfer_mode[devno] = dev->xfer_mode;if (ata_ncq_enabled (dev)) ehc->saved_ncq_enabled |=1 << devno;
@@ -1161,6 +1164,7 @@ void ata_eh_detach_dev(struct ata_device *dev) {struct ata_link *link = dev->link;struct ata_port *ap = link->ap; +struct ata_eh_context *ehc = &link->eh_context;unsigned long flags;ata_dev_disable (dev);
@@ -1174,9 +1178,11 @@ void ata_eh_detach_dev(struct ata_device *dev) ap->pflags |=ATA_PFLAG_SCSI_HOTPLUG ; } -/* clear per-dev EH actions */ +/* clear per-dev EH info */ ata_eh_clear_action (link, dev, &link->eh_info,ATA_EH_PERDEV_MASK );ata_eh_clear_action (link, dev, &link->eh_context.i,ATA_EH_PERDEV_MASK ); + ehc->saved_xfer_mode[dev->devno] =0 ; + ehc->saved_ncq_enabled &= ~(1 << dev->devno);spin_unlock_irqrestore (ap->lock, flags); }
@@ -2787,6 +2793,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)/* if data transfer is verified, clear DUBIOUS_XFER on ering top */ ata_link_for_each_dev (dev, link) { +if (!ata_dev_enabled (dev)) +continue ; +if (!(dev->flags &ATA_DFLAG_DUBIOUS_XFER )) {struct ata_ering_entry *ent;
@@ -2808,6 +2817,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno];u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno)); +if (!ata_dev_enabled (dev)) +continue ; +if (dev->xfer_mode != saved_xfer_mode ||ata_ncq_enabled (dev) != saved_ncq) dev->flags |=ATA_DFLAG_DUBIOUS_XFER ;
drivers/ata/pata_acpi.c +1 -1
@@ -1,7 +1,7 @@/* * ACPI PATA driver * -* (c) 2007 Red Hat <[email protected]> +* (c) 2007 Red Hat */ #include <linux/kernel.h>
drivers/ata/pata_ali.c +0 -1
@@ -1,7 +1,6 @@/* * pata_ali.c - ALI 15x3 PATA for new ATA layer * (C) 2005 Red Hat Inc -* Alan Cox <[email protected]> * * based in part upon * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02
drivers/ata/pata_amd.c +0 -1
@@ -1,7 +1,6 @@/* * pata_amd.c - AMD PATA for new ATA layer * (C) 2005-2006 Red Hat Inc -* Alan Cox <[email protected]> * * Based on pata-sil680. Errata information is taken from data sheets * and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are
drivers/ata/pata_artop.c +1 -1
@@ -1,7 +1,7 @@/* * pata_artop.c - ARTOP ATA controller driver * -* (C) 2006 Red Hat <[email protected]> +* (C) 2006 Red Hat * (C) 2007 Bartlomiej Zolnierkiewicz * * Based in part on drivers/ide/pci/aec62xx.c
drivers/ata/pata_atiixp.c +0 -1
@@ -1,7 +1,6 @@/* * pata_atiixp.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc -* Alan Cox <[email protected]> * * Based on *
drivers/ata/pata_cmd640.c +0 -1
@@ -1,7 +1,6 @@/* * pata_cmd640.c - CMD640 PCI PATA for new ATA layer * (C) 2007 Red Hat Inc -* Alan Cox <[email protected]> * * Based upon * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996
drivers/ata/pata_cmd64x.c +1 -1
@@ -1,7 +1,7 @@/* * pata_cmd64x.c - CMD64x PATA for new ATA layer * (C) 2005 Red Hat Inc -* Alan Cox <[email protected]> +* Alan Cox <[email protected]> * * Based upon * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002
drivers/ata/pata_cs5530.c +0 -1
@@ -1,7 +1,6 @@/* * pata-cs5530.c - CS5530 PATA for new ATA layer * (C) 2005 Red Hat Inc -* Alan Cox <[email protected]> * * based upon cs5530.c by Mark Lord. *
drivers/ata/pata_cs5535.c +1 -1
@@ -1,7 +1,7 @@/* * pata-cs5535.c - CS5535 PATA for new ATA layer * (C) 2005-2006 Red Hat Inc -* Alan Cox <[email protected]> +* Alan Cox <[email protected]> * * based upon cs5535.c from AMD <[email protected]> as cleaned up and * made readable and Linux style by Wolfgang Zuleger <[email protected]
drivers/ata/pata_cypress.c +1 -1
@@ -1,7 +1,7 @@/* * pata_cypress.c - Cypress PATA for new ATA layer * (C) 2006 Red Hat Inc -* Alan Cox <[email protected]> +* Alan Cox * * Based heavily on * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002
drivers/ata/pata_efar.c +1 -1
@@ -1,7 +1,7 @@/* * pata_efar.c - EFAR PIIX clone controller driver * -* (C) 2005 Red Hat <[email protected]> +* (C) 2005 Red Hat * * Some parts based on ata_piix.c by Jeff Garzik and others. *
drivers/ata/pata_isapnp.c +1 -1
@@ -1,7 +1,7 @@/* * pata-isapnp.c - ISA PnP PATA controller driver. -* Copyright 2005/2006 Red Hat Inc <[email protected]>, all rights reserved. +* Copyright 2005/2006 Red Hat Inc, all rights reserved. * * Based in part on ide-pnp.c by Andrey Panin <[email protected]> */
drivers/ata/pata_it821x.c +3 -4
@@ -1,7 +1,7 @@/* * pata_it821x.c - IT821x PATA for new ATA layer * (C) 2005 Red Hat Inc -* Alan Cox <[email protected]> +* Alan Cox <[email protected]> * (C) 2007 Bartlomiej Zolnierkiewicz * * based upon
@@ -10,7 +10,7 @@* * linux/drivers/ide/pci/it821x.c Version 0.09 December 2004 * -* Copyright (C) 2004 Red Hat <[email protected]> +* Copyright (C) 2004 Red Hat * * May be copied or modified under the terms of the GNU General Public License * Based in part on the ITE vendor provided SCSI driver.
@@ -557,9 +557,8 @@ static unsigned int it821x_read_id(struct ata_device *adev,if (strstr (model_num,"Integrated Technology Express" )) {/* Set feature bits the firmware neglects */ id[49 ] |=0x0300 ;/* LBA, DMA */ - id[82 ] |=0x0400 ;/* LBA48 */ id[83 ] &=0x7FFF ; - id[83 ] |=0x4000 ;/* Word 83 is valid */ + id[83 ] |=0x4400 ;/* Word 83 is valid and LBA48 */ id[86 ] |=0x0400 ;/* LBA48 on */ id[ATA_ID_MAJOR_VER ] |=0x1F ; }
drivers/ata/pata_jmicron.c +1 -1
@@ -4,7 +4,7 @@* driven by AHCI in the usual configuration although * this driver can handle other setups if we need it. * -* (c) 2006 Red Hat <[email protected]> +* (c) 2006 Red Hat */ #include <linux/kernel.h>
drivers/ata/pata_legacy.c +1 -1
@@ -1,6 +1,6 @@/* * pata-legacy.c - Legacy port PATA/SATA controller driver. -* Copyright 2005/2006 Red Hat <[email protected]>, all rights reserved. +* Copyright 2005/2006 Red Hat, all rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by
drivers/ata/pata_marvell.c +1 -1
@@ -5,7 +5,7 @@* isn't making full use of the device functionality but it is * easy to get working. * -* (c) 2006 Red Hat <[email protected]> +* (c) 2006 Red Hat */ #include <linux/kernel.h>
drivers/ata/pata_mpiix.c +1 -1
@@ -1,7 +1,7 @@/* * pata_mpiix.c - Intel MPIIX PATA for new ATA layer * (C) 2005-2006 Red Hat Inc -* Alan Cox <[email protected]> +* Alan Cox <[email protected]> * * The MPIIX is different enough to the PIIX4 and friends that we give it * a separate driver. The old ide/pci code handles this by just not tuning
drivers/ata/pata_netcell.c +1 -1
@@ -1,7 +1,7 @@/* * pata_netcell.c - Netcell PATA driver * -* (c) 2006 Red Hat <[email protected]> +* (c) 2006 Red Hat */ #include <linux/kernel.h>
drivers/ata/pata_ninja32.c +34 -10
79 lines not on this page · raw message
drivers/ata/pata_ns87410.c +0 -1
@@ -1,7 +1,6 @@/* * pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer * (C) 2006 Red Hat Inc -* Alan Cox <[email protected]> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by
drivers/ata/pata_ns87415.c +1 -1
@@ -1,7 +1,7 @@/* * pata_ns87415.c - NS87415 (non PARISC) PATA * -* (C) 2005 Red Hat <[email protected]> +* (C) 2005 Red Hat <[email protected]> * * This is a fairly generic MWDMA controller. It has some limitations * as it requires timing reloads on PIO/DMA transitions but it is otherwise
drivers/ata/pata_oldpiix.c +1 -1
@@ -1,7 +1,7 @@/* * pata_oldpiix.c - Intel PATA/SATA controllers * -* (C) 2005 Red Hat <[email protected]> +* (C) 2005 Red Hat * * Some parts based on ata_piix.c by Jeff Garzik and others. *
drivers/ata/pata_opti.c +0 -1
@@ -1,7 +1,6 @@/* * pata_opti.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc -* Alan Cox <[email protected]> * * Based on * linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002
drivers/ata/pata_optidma.c +0 -1
@@ -1,7 +1,6 @@/* * pata_optidma.c - Opti DMA PATA for new ATA layer * (C) 2006 Red Hat Inc -* Alan Cox <[email protected]> * * The Opti DMA controllers are related to the older PIO PCI controllers * and indeed the VLB ones. The main differences are that the timing
drivers/ata/pata_pcmcia.c +1 -1
@@ -1,6 +1,6 @@/* * pata_pcmcia.c - PCMCIA PATA controller driver. -* Copyright 2005-2006 Red Hat Inc <[email protected]>, all rights reserved. +* Copyright 2005-2006 Red Hat Inc, all rights reserved. * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz * <[email protected]> *
drivers/ata/pata_pdc202xx_old.c +1 -1
@@ -1,7 +1,7 @@/* * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer * (C) 2005 Red Hat Inc -* Alan Cox <[email protected]> +* Alan Cox <[email protected]> * (C) 2007 Bartlomiej Zolnierkiewicz * * Based in part on linux/drivers/ide/pci/pdc202xx_old.c
drivers/ata/pata_platform.c +1 -1
@@ -5,7 +5,7 @@* * Based on pata_pcmcia: * -* Copyright 2005-2006 Red Hat Inc <[email protected]>, all rights reserved. +* Copyright 2005-2006 Red Hat Inc, all rights reserved. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive
drivers/ata/pata_qdi.c +1 -1
@@ -1,6 +1,6 @@/* * pata_qdi.c - QDI VLB ATA controllers -* (C) 2006 Red Hat <[email protected]> +* (C) 2006 Red Hat * * This driver mostly exists as a proof of concept for non PCI devices under * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
drivers/ata/pata_radisys.c +1 -1
@@ -1,7 +1,7 @@/* * pata_radisys.c - Intel PATA/SATA controllers * -* (C) 2006 Red Hat <[email protected]> +* (C) 2006 Red Hat <[email protected]> * * Some parts based on ata_piix.c by Jeff Garzik and others. *
drivers/ata/pata_sc1200.c +1 -1
@@ -1,5 +1,5 @@/* -* New ATA layer SC1200 driver Alan Cox <[email protected]> +* New ATA layer SC1200 driver Alan Cox <[email protected]> * * TODO: Mode selection filtering * TODO: Can't enable second channel until ATA core has serialize
drivers/ata/pata_scc.c +1 -1
@@ -8,7 +8,7 @@* Copyright 2003-2005 Jeff Garzik * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <[email protected]> -* Copyright (C) 2003 Red Hat Inc <[email protected]> +* Copyright (C) 2003 Red Hat Inc * * and drivers/ata/ahci.c: * Copyright 2004-2005 Red Hat, Inc.
drivers/ata/pata_serverworks.c +0 -1
@@ -1,7 +1,6 @@/* * pata_serverworks.c - Serverworks PATA for new ATA layer * (C) 2005 Red Hat Inc -* Alan Cox <[email protected]> * * based upon *
drivers/ata/pata_sil680.c +0 -1
@@ -1,7 +1,6 @@/* * pata_sil680.c - SIL680 PATA for new ATA layer * (C) 2005 Red Hat Inc -* Alan Cox <[email protected]> * * based upon *
drivers/ata/pata_sis.c +1 -1
@@ -1,7 +1,7 @@/* * pata_sis.c - SiS ATA driver * -* (C) 2005 Red Hat <[email protected]> +* (C) 2005 Red Hat * (C) 2007 Bartlomiej Zolnierkiewicz * * Based upon linux/drivers/ide/pci/sis5513.c
drivers/ata/pata_sl82c105.c +0 -1
@@ -1,7 +1,6 @@/* * pata_sl82c105.c - SL82C105 PATA for new ATA layer * (C) 2005 Red Hat Inc -* Alan Cox <[email protected]> * * Based in part on linux/drivers/ide/pci/sl82c105.c * SL82C105/Winbond 553 IDE driver
drivers/ata/pata_triflex.c +1 -1
@@ -1,7 +1,7 @@/* * pata_triflex.c - Compaq PATA for new ATA layer * (C) 2005 Red Hat Inc -* Alan Cox <[email protected]> +* Alan Cox <[email protected]> * * based upon *
drivers/ata/pata_via.c +0 -1
@@ -1,7 +1,6 @@/* * pata_via.c - VIA PATA for new ATA layer * (C) 2005-2006 Red Hat Inc -* Alan Cox <[email protected]> * * Documentation * Most chipset documentation available under NDA only
drivers/ata/pata_winbond.c +1 -1
@@ -1,6 +1,6 @@/* * pata_winbond.c - Winbond VLB ATA controllers -* (C) 2006 Red Hat <[email protected]> +* (C) 2006 Red Hat * * Support for the Winbond 83759A when operating in advanced mode. * Multichip mode is not currently supported.
drivers/ata/sata_sil24.c +5 -0
@@ -1329,6 +1329,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } +/* Set max read request size to 4096. This slightly increases +* write throughput for pci-e variants. +*/ +pcie_set_readrq (pdev,4096 ); +sil24_init_controller (host);pci_set_master (pdev);