mac80211/cfg80211/hwsim: Basic rate and TXQ params

Index: wireless-testing/drivers/net/wireless/mac80211_hwsim.c
===================================================================
@@ -415,6 +415,43 @@
 					    u32 changed)
 {
 	hwsim_check_magic(vif);
+
+	printk(KERN_DEBUG "%s:%s(changed=0x%x)\n",
+	       wiphy_name(hw->wiphy), __func__, changed);
+
+	if (changed & BSS_CHANGED_ASSOC) {
+		printk(KERN_DEBUG "  %s: ASSOC: assoc=%d aid=%d\n",
+		       wiphy_name(hw->wiphy), info->assoc, info->aid);
+	}
+
+	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+		printk(KERN_DEBUG "  %s: ERP_CTS_PROT: %d\n",
+		       wiphy_name(hw->wiphy), info->use_cts_prot);
+	}
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		printk(KERN_DEBUG "  %s: ERP_PREAMBLE: %d\n",
+		       wiphy_name(hw->wiphy), info->use_short_preamble);
+	}
+
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		printk(KERN_DEBUG "  %s: ERP_SLOT: %d\n",
+		       wiphy_name(hw->wiphy), info->use_short_slot);
+	}
+
+	if (changed & BSS_CHANGED_HT) {
+		printk(KERN_DEBUG "  %s: HT: sec_ch_offs=%d width_40_ok=%d "
+		       "op_mode=%d\n",
+		       wiphy_name(hw->wiphy),
+		       info->ht.secondary_channel_offset,
+		       info->ht.width_40_ok, info->ht.operation_mode);
+	}
+
+	if (changed & BSS_CHANGED_BASIC_RATES) {
+		printk(KERN_DEBUG "  %s: BASIC_RATES: 0x%llx\n",
+		       wiphy_name(hw->wiphy),
+		       (unsigned long long) info->basic_rates);
+	}
 }
 
 static void mac80211_hwsim_sta_notify(struct ieee80211_hw *hw,

Index: wireless-testing/include/linux/nl80211.h
===================================================================
@@ -243,6 +243,9 @@
  *	(u8, 0 or 1)
  * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
  *	(u8, 0 or 1)
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
+ *	rates in format defined by IEEE 802.11 7.3.2.2 but without the length
+ *	restriction (at most %NL80211_MAX_SUPP_RATES).
  *
  * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
  *	association request when used with NL80211_CMD_NEW_STATION)

@@ -307,6 +310,8 @@
 
 	NL80211_ATTR_MESH_PARAMS,
 
+	NL80211_ATTR_BSS_BASIC_RATES,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,

@@ -318,6 +323,7 @@
  * here
  */
 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
 
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_REG_RULES		32

Index: wireless-testing/include/net/cfg80211.h
===================================================================
@@ -280,11 +280,16 @@
  *	(0 = no, 1 = yes, -1 = do not change)
  * @use_short_slot_time: Whether the use of short slot time is allowed
  *	(0 = no, 1 = yes, -1 = do not change)
+ * @basic_rates: basic rates in IEEE 802.11 format
+ *	(or NULL for no change)
+ * @basic_rates_len: number of basic rates
  */
 struct bss_parameters {
 	int use_cts_prot;
 	int use_short_preamble;
 	int use_short_slot_time;
+	u8 *basic_rates;
+	u8 basic_rates_len;
 };
 
 /**

Index: wireless-testing/net/mac80211/cfg.c
===================================================================
@@ -1048,6 +1048,24 @@
 		changed |= BSS_CHANGED_ERP_SLOT;
 	}
 
+	if (params->basic_rates) {
+		int i, j;
+		u32 rates = 0;
+		struct ieee80211_local *local = wiphy_priv(wiphy);
+		struct ieee80211_supported_band *sband =
+			wiphy->bands[local->oper_channel->band];
+
+		for (i = 0; i < params->basic_rates_len; i++) {
+			int rate = (params->basic_rates[i] & 0x7f) * 5;
+			for (j = 0; j < sband->n_bitrates; j++) {
+				if (sband->bitrates[j].bitrate == rate)
+					rates |= BIT(j);
+			}
+		}
+		sdata->vif.bss_conf.basic_rates = rates;
+		changed |= BSS_CHANGED_BASIC_RATES;
+	}
+
 	ieee80211_bss_info_change_notify(sdata, changed);
 
 	return 0;

Index: wireless-testing/net/wireless/nl80211.c
===================================================================
@@ -95,6 +95,8 @@
 	[NL80211_ATTR_BSS_CTS_PROT] = { .type = NLA_U8 },
 	[NL80211_ATTR_BSS_SHORT_PREAMBLE] = { .type = NLA_U8 },
 	[NL80211_ATTR_BSS_SHORT_SLOT_TIME] = { .type = NLA_U8 },
+	[NL80211_ATTR_BSS_BASIC_RATES] = { .type = NLA_BINARY,
+					   .len = NL80211_MAX_SUPP_RATES },
 
 	[NL80211_ATTR_MESH_PARAMS] = { .type = NLA_NESTED },
 

@@ -1613,6 +1615,12 @@
 	if (info->attrs[NL80211_ATTR_BSS_SHORT_SLOT_TIME])
 		params.use_short_slot_time =
 		    nla_get_u8(info->attrs[NL80211_ATTR_BSS_SHORT_SLOT_TIME]);
+	if (info->attrs[NL80211_ATTR_BSS_BASIC_RATES]) {
+		params.basic_rates =
+			nla_data(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
+		params.basic_rates_len =
+			nla_len(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
+	}
 
 	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)

Index: wireless-testing/drivers/net/wireless/mac80211_hwsim.c
===================================================================
@@ -478,6 +478,17 @@
 	return 0;
 }
 
+static int mac80211_hwsim_conf_tx(
+	struct ieee80211_hw *hw, u16 queue,
+	const struct ieee80211_tx_queue_params *params)
+{
+	printk(KERN_DEBUG "%s:%s (queue=%d txop=%d cw_min=%d cw_max=%d "
+	       "aifs=%d)\n",
+	       wiphy_name(hw->wiphy), __func__, queue,
+	       params->txop, params->cw_min, params->cw_max, params->aifs);
+	return 0;
+}
+
 static const struct ieee80211_ops mac80211_hwsim_ops =
 {
 	.tx = mac80211_hwsim_tx,

@@ -491,6 +502,7 @@
 	.bss_info_changed = mac80211_hwsim_bss_info_changed,
 	.sta_notify = mac80211_hwsim_sta_notify,
 	.set_tim = mac80211_hwsim_set_tim,
+	.conf_tx = mac80211_hwsim_conf_tx,
 };
 
 

Index: wireless-testing/include/linux/nl80211.h
===================================================================
@@ -25,8 +25,9 @@
  *
  * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
  *	to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy name, needs %NL80211_ATTR_WIPHY and
- *	%NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
+ *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME
+ *	and/or %NL80211_ATTR_WIPHY_TXQ_PARAMS.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *	%NL80211_ATTR_WIPHY_NAME.

@@ -178,6 +179,7 @@
  * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
  *	/sys/class/ieee80211/<phyname>/index
  * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
  *
  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
  * @NL80211_ATTR_IFNAME: network interface name

@@ -312,6 +314,8 @@
 
 	NL80211_ATTR_BSS_BASIC_RATES,
 
+	NL80211_ATTR_WIPHY_TXQ_PARAMS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,

@@ -324,6 +328,7 @@
  */
 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
+#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
 
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_REG_RULES		32

@@ -698,4 +703,38 @@
 	NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
 };
 
+/**
+ * enum nl80211_txq_attr - TX queue parameter attributes
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
+ * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
+ *	disabled
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
+ */
+enum nl80211_txq_attr {
+	__NL80211_TXQ_ATTR_INVALID,
+	NL80211_TXQ_ATTR_QUEUE,
+	NL80211_TXQ_ATTR_TXOP,
+	NL80211_TXQ_ATTR_CWMIN,
+	NL80211_TXQ_ATTR_CWMAX,
+	NL80211_TXQ_ATTR_AIFS,
+
+	/* keep last */
+	__NL80211_TXQ_ATTR_AFTER_LAST,
+	NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
+};
+
+enum nl80211_txq_q {
+	NL80211_TXQ_Q_VO,
+	NL80211_TXQ_Q_VI,
+	NL80211_TXQ_Q_BE,
+	NL80211_TXQ_Q_BK
+};
+
 #endif /* __LINUX_NL80211_H */

Index: wireless-testing/include/net/cfg80211.h
===================================================================
@@ -371,6 +371,24 @@
 	u16 dot11MeshHWMPnetDiameterTraversalTime;
 };
 
+/**
+ * struct ieee80211_txq_params - TX queue parameters
+ * @queue: TX queue identifier (NL80211_TXQ_Q_*)
+ * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
+ * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
+ *	1..32767]
+ * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
+ *	1..32767]
+ * @aifs: Arbitration interframe space [0..255]
+ */
+struct ieee80211_txq_params {
+	enum nl80211_txq_q queue;
+	u16 txop;
+	u16 cwmin;
+	u16 cwmax;
+	u8 aifs;
+};
+
 /* from net/wireless.h */
 struct wiphy;
 

@@ -430,6 +448,8 @@
  * @set_mesh_cfg: set mesh parameters (by now, just mesh id)
  *
  * @change_bss: Modify parameters for a given BSS.
+ *
+ * @set_txq_params: Set TX queue parameters
  */
 struct cfg80211_ops {
 	int	(*add_virtual_intf)(struct wiphy *wiphy, char *name,

@@ -490,6 +510,9 @@
 				const struct mesh_config *nconf, u32 mask);
 	int	(*change_bss)(struct wiphy *wiphy, struct net_device *dev,
 			      struct bss_parameters *params);
+
+	int	(*set_txq_params)(struct wiphy *wiphy,
+				  struct ieee80211_txq_params *params);
 };
 
 #endif /* __NET_CFG80211_H */

Index: wireless-testing/net/mac80211/cfg.c
===================================================================
@@ -1071,6 +1071,30 @@
 	return 0;
 }
 
+static int ieee80211_set_txq_params(struct wiphy *wiphy,
+				    struct ieee80211_txq_params *params)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_tx_queue_params p;
+
+	if (!local->ops->conf_tx)
+		return -EOPNOTSUPP;
+
+	memset(&p, 0, sizeof(p));
+	p.aifs = params->aifs;
+	p.cw_max = params->cwmax;
+	p.cw_min = params->cwmin;
+	p.txop = params->txop;
+	if (local->ops->conf_tx(local_to_hw(local), params->queue, &p)) {
+		printk(KERN_DEBUG "%s: failed to set TX queue "
+		       "parameters for queue %d\n", local->mdev->name,
+		       params->queue);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 struct cfg80211_ops mac80211_config_ops = {
 	.add_virtual_intf = ieee80211_add_iface,
 	.del_virtual_intf = ieee80211_del_iface,

@@ -1097,4 +1121,5 @@
 	.get_mesh_params = ieee80211_get_mesh_params,
 #endif
 	.change_bss = ieee80211_change_bss,
+	.set_txq_params = ieee80211_set_txq_params,
 };

88 lines not on this page · raw message

Index: wireless-testing/drivers/net/wireless/mac80211_hwsim.c
===================================================================
@@ -290,6 +290,7 @@
 {
 	struct mac80211_hwsim_data *data = hw->priv;
 	data->started = 0;
+	del_timer(&data->beacon_timer);
 	printk(KERN_DEBUG "%s:%s\n", wiphy_name(hw->wiphy), __func__);
 }