thinkpad x200 X.server not work with gm4500 graphics
deal,
My thinkpad x200's X.server can not startup on the kernel 2.6.28,
and dmesg will show as below:
-->>--
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
pci 0000:00:02.0: pg_start == 0x00001f7f, intel_private.gtt_entries == 0x00001fff
pci 0000:00:02.0: trying to insert into local/stolen memory
--<<--
Then, I change file "drivers/char/agp/intel-agp.c" as this:
-->>--
--diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 9cf6e9b..e681f75 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -528,7 +528,8 @@ static void intel_i830_init_gtt_entries(void)
* stolen, ignore it in stolen gtt entries counting. However,
* 4KB of the stolen memory doesn't get mapped to the GTT.
*/
- size = 4;
+ /* size = 4; */
+ size = 516;
} else {
/* On previous hardware, the GTT size was just what was
* required to map the aperture.
--<<--
And Xorg can start now.(1) Is it correct ?
Because older kernel use size as "512 + 4" at here, but now use "size = 4".
(2) How to deal with it if the patch is not right ?
(3) How to get more specification about gm4500 ?
Quoted 3 lines · On Mon, 10 Nov 2008 23:25:18 +0800 [email protected] wrote:
deal,
My thinkpad x200's X.server can not startup on the kernel 2.6.28,
Were any earlier kernels OK? If so, which version(s)?
Thanks.
Quoted 34 lines
and dmesg will show as below:
-->>-- [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: power state changed by ACPI to D0 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 pci 0000:00:02.0: pg_start == 0x00001f7f, intel_private.gtt_entries == 0x00001fff pci 0000:00:02.0: trying to insert into local/stolen memory --<<-- Then, I change file "drivers/char/agp/intel-agp.c" as this: -->>-- --diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 9cf6e9b..e681f75 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -528,7 +528,8 @@ static void intel_i830_init_gtt_entries(void) * stolen, ignore it in stolen gtt entries counting. However, * 4KB of the stolen memory doesn't get mapped to the GTT. */ - size = 4; + /* size = 4; */ + size = 516; } else { /* On previous hardware, the GTT size was just what was * required to map the aperture. --<<-- And Xorg can start now.(1) Is it correct ?
Because older kernel use size as "512 + 4" at here, but now use "size = 4".
(2) How to deal with it if the patch is not right ?
(3) How to get more specification about gm4500 ?
Quoted 7 lines · Andrew Morton
Quoted 3 lines · On Mon, 10 Nov 2008 23:25:18 +0800 [email protected] wrote:
deal,
My thinkpad x200's X.server can not startup on the kernel 2.6.28,
Were any earlier kernels OK? If so, which version(s)?
What userspace Intel X driver is in use? afaik the GM45 wasn't supported until after we fixed this issue. Hacking around the size in the kernel won't actually fix the problem it actually makes a lot of things a lot worse.
Dave.
Quoted 38 lines
Quoted 36 lines
Thanks.
and dmesg will show as below:
-->>-- [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: power state changed by ACPI to D0 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 pci 0000:00:02.0: pg_start == 0x00001f7f, intel_private.gtt_entries == 0x00001fff pci 0000:00:02.0: trying to insert into local/stolen memory --<<-- Then, I change file "drivers/char/agp/intel-agp.c" as this: -->>-- --diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 9cf6e9b..e681f75 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -528,7 +528,8 @@ static void intel_i830_init_gtt_entries(void) * stolen, ignore it in stolen gtt entries counting. However, * 4KB of the stolen memory doesn't get mapped to the GTT. */ - size = 4; + /* size = 4; */ + size = 516; } else { /* On previous hardware, the GTT size was just what was * required to map the aperture. --<<-- And Xorg can start now.(1) Is it correct ?
Because older kernel use size as "512 + 4" at here, but now use "size = 4".
(2) How to deal with it if the patch is not right ?
(3) How to get more specification about gm4500 ?
Quoted 6 lines · Dave Airlie
Quoted 4 lines · Andrew Morton
Quoted 2 lines · On Mon, 10 Nov 2008 23:25:18 +0800 [email protected] wrote:
deal,
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
My thinkpad x200's X.server can not startup on the kernel 2.6.28,
Were any earlier kernels OK? If so, which version(s)?
What userspace Intel X driver is in use? afaik the GM45 wasn't supported until after we fixed this issue. Hacking around the size in the kernel won't actually fix the problem it actually makes a lot of things a lot worse.
My video-driver is "xf86-video-intel 2.3.2",
and "X.Org X Server 1.4.2", my distribution is Archlinux. The patch's size is calculated with the dmesg from kernel-2.6.27. My lap-top computer work now, but I'm not sure that, So is there any specification about it or any suggestion, I'm glad to do some test on it.
Quoted 37 lines
Quoted 37 lines
Quoted 35 lines
and dmesg will show as below:
-->>-- [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: power state changed by ACPI to D0 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 pci 0000:00:02.0: pg_start == 0x00001f7f, intel_private.gtt_entries == 0x00001fff pci 0000:00:02.0: trying to insert into local/stolen memory --<<-- Then, I change file "drivers/char/agp/intel-agp.c" as this: -->>-- --diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 9cf6e9b..e681f75 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -528,7 +528,8 @@ static void intel_i830_init_gtt_entries(void) * stolen, ignore it in stolen gtt entries counting. However, * 4KB of the stolen memory doesn't get mapped to the GTT. */ - size = 4; + /* size = 4; */ + size = 516; } else { /* On previous hardware, the GTT size was just what was * required to map the aperture. --<<-- And Xorg can start now.(1) Is it correct ?
Because older kernel use size as "512 + 4" at here, but now use "size = 4".
(2) How to deal with it if the patch is not right ?
(3) How to get more specification about gm4500 ?
Quoted 4 lines · Andrew Morton
Quoted 1 line · On Mon, 10 Nov 2008 23:25:18 +0800 [email protected] wrote:
My thinkpad x200's X.server can not startup on the kernel 2.6.28,
Were any earlier kernels OK? If so, which version(s)?
v2.6.27 work fine while v2.6.27-rc[1,2,3,4] do not work.