New board walnut with u-boot
Hi,
i've ported u-boot-1.1.6 and DHT walnut board to qemu-0.9.1 environment. At qemu side:
- LACK of flash CFI interaction, i2c, PCI support,
- CONTAIN board parameter, serial, emac full support
As result, using tun driver and tap interface, is possible to have full network function up and running.
I've tested ping, tftp, dhcp from u-boot shell and all is ok! (reach 80KB/sec but with cpu eated by qemu since u-boot !use idle state)
Here some spec extracted by u-boot console:
CPU: AMCC PowerPC 405GP Rev. E at 266.640 MHz (PLB=66, OPB=33, EBC=33 MHz)
Internal PCI arbiter enabled, PCI async ext clock used 16 kB I-Cache 8 kB D-Cache
Normally at work use clearcase (both UCM and cc) as versioning system. To integrate the patch, and simplify integration, i need some info
- is the current trunk in use svn://svn.sv.gnu.org/qemu/trunk?
- could i directly deliver such work?
If yes to both question, i'll test in local, check just delivered code, test the integration.
Have a good day
Salvatore
Unisciti alla community di Io fotografo e video, il nuovo corso di fotografia di Gazzetta dello sport:
http://www.flickr.com/groups/iofotografoevideo
Quoted 3 lines · Salvatore Lionetti
Hi,
i've ported u-boot-1.1.6 and DHT walnut board to qemu-0.9.1 environment.
I've prepare the DHT Walnut for U-Boot mainline
(patch send to the U-Boot ML soon)
It will be good the test qemu with it
Best Regards,
J.
Hi,
Quoted 5 lines
i've ported u-boot-1.1.6 and DHT walnut board to qemu-0.9.1 environment.
At qemu side:
- LACK of flash CFI interaction, i2c, PCI support,
- CONTAIN board parameter, serial, emac full support
Oh, interesting.
I want to port Haiku to the SAM440 board, which uses PPC, but also U- Boot (couldn't they just use OF ?), so I'll need to add U-Boot support to Haiku, so I really welcome this to be able to test it :)
http://www.sam440.com/eng/summerfollies.html
Btw, 1.1.6 seems quite old for U-Boot...
Do you plan on porting the current one too ?
I will need some features that are still being worked on (the external API, to use U-Boot as kind of minimal BIOS, to let our bootloader use it to send serial debug and do disk/other I/O before the kernel is loaded).
Quoted 2 lines
To integrate the patch, and simplify integration, i need some info
- is the current trunk in use svn://svn.sv.gnu.org/qemu/trunk?
Yes.
patches, and developments in general should be made against trunk, else you'll have to keep up merging your patches from the old version which wastes both your and the devs time.
Quoted 1 line
- could i directly deliver such work?
Just post the diff on this list, you'll get comments about them, and maybe commits if they are ok.
François.
Hi François,
i've just sended a first revisione of file emac.c, understood that is ok, but until now no code is added to svn. Now i'll try with the second.
As you see in e-mail, my port is not all comprehensive of Walnut board, so some little patch in u-boot is needed.
If Haitu port is well done, i don't expect big pb!
Have a good day
--- Ven 14/11/08, François Revol <[email protected]> ha scritto:
Quoted 44 lines
Da: François Revol <[email protected]>
Oggetto: Re: [Qemu-devel] [PowerPC] New board walnut with u-boot
A: [email protected], [email protected]
Data: Venerdì 14 novembre 2008, 00:36
Hi,Quoted 1 line
i've ported u-boot-1.1.6 and DHT walnut board to
qemu-0.9.1
Quoted 4 lines
environment.
At qemu side:
- LACK of flash CFI interaction, i2c, PCI support,
- CONTAIN board parameter, serial, emac full supportOh, interesting.
I want to port Haiku to the SAM440 board, which uses PPC, but also U-
Boot (couldn't they just use OF ?), so I'll need to add U-Boot support
to Haiku, so I really welcome this to be able to test it :)http://www.sam440.com/eng/summerfollies.html
Btw, 1.1.6 seems quite old for U-Boot...
Do you plan on porting the current one too ?
I will need some features that are still being worked on (the external
API, to use U-Boot as kind of minimal BIOS, to let our bootloader use
it to send serial debug and do disk/other I/O before the kernel is
loaded).Quoted 1 line
To integrate the patch, and simplify integration, i
need some info
Quoted 1 line
- is the current trunk in use
svn://svn.sv.gnu.org/qemu/trunk?
Yes.
patches, and developments in general should be made against trunk, else
you'll have to keep up merging your patches from the old version which
wastes both your and the devs time.
Quoted 7 lines
Quoted 1 line
- could i directly deliver such work?
Just post the diff on this list, you'll get comments about them, and
maybe commits if they are ok.François.
Unisciti alla community di Io fotografo e video, il nuovo corso di fotografia di Gazzetta dello sport:
http://www.flickr.com/groups/iofotografoevideo