ocfs2: Remove JBD compatibility layer
PATCH 1/1 ocfs2: Remove JBD compatibility layer
JBD2 is fully backwards compatible with JBD and it's been tested enough with Ocfs2 that we can clean this code up now.
Signed-off-by Mark Fasheh <[email protected]>
--- fs/Kconfig | 10 ----- fs/ocfs2/alloc.c | 5 --- fs/ocfs2/aops.c | 24 +----------- fs/ocfs2/journal.c | 14 ------- fs/ocfs2/journal.h | 11 +----- fs/ocfs2/ocfs2_jbd_compat.h | 82 ------------------------------------------- 6 files changed, 3 insertions(+), 143 deletions(-) delete mode 100644 fs/ocfs2/ocfs2_jbd_compat.h
fs/Kconfig +0 -10
@@ -258,16 +258,6 @@ config OCFS2_DEBUG_FS this option for debugging only as it is likely to decrease performance of the filesystem. -config OCFS2_COMPAT_JBD - bool "Use JBD for compatibility" - depends on OCFS2_FS - default n - select JBD - help - The ocfs2 filesystem now uses JBD2 for its journalling. JBD2 - is backwards compatible with JBD. It is safe to say N here. - However, if you really want to use the original JBD, say Y here. - config OCFS2_FS_POSIX_ACL bool "OCFS2 POSIX Access Control Lists" depends on OCFS2_FS
fs/ocfs2/alloc.c +0 -5
@@ -6638,11 +6638,6 @@ static void ocfs2_map_and_dirty_page(struct inode *inode, handle_t *handle,mlog_errno (ret); else if (ocfs2_should_order_data(inode)) { ret =ocfs2_jbd2_file_inode (handle, inode); -#ifdef CONFIG_OCFS2_COMPAT_JBD - ret =walk_page_buffers (handle,page_buffers (page), - from, to, &partial, - ocfs2_journal_dirty_data); -#endif if (ret <0 )mlog_errno (ret); }
fs/ocfs2/aops.c +2 -22
@@ -474,12 +474,6 @@ handle_t *ocfs2_start_walk_page_trans(struct inode *inode,if (ocfs2_should_order_data (inode)) { ret =ocfs2_jbd2_file_inode (handle, inode); -#ifdef CONFIG_OCFS2_COMPAT_JBD - ret =walk_page_buffers (handle, -page_buffers (page), - from, to,NULL , - ocfs2_journal_dirty_data); -#endif if (ret <0 )mlog_errno (ret); }
@@ -1065,15 +1059,8 @@ static void ocfs2_write_failure(struct inode *inode, tmppage = wc->w_pages[i];if (page_has_buffers (tmppage)) { -if (ocfs2_should_order_data (inode)) { +if (ocfs2_should_order_data (inode))ocfs2_jbd2_file_inode (wc->w_handle, inode); -#ifdef CONFIG_OCFS2_COMPAT_JBD -walk_page_buffers (wc->w_handle, -page_buffers (tmppage), - from, to,NULL , - ocfs2_journal_dirty_data); -#endif - }block_commit_write (tmppage, from, to); }
@@ -1912,15 +1899,8 @@ int ocfs2_write_end_nolock(struct address_space *mapping, }if (page_has_buffers (tmppage)) { -if (ocfs2_should_order_data (inode)) { +if (ocfs2_should_order_data (inode))ocfs2_jbd2_file_inode (wc->w_handle, inode); -#ifdef CONFIG_OCFS2_COMPAT_JBD -walk_page_buffers (wc->w_handle, -page_buffers (tmppage), - from, to,NULL , - ocfs2_journal_dirty_data); -#endif - }block_commit_write (tmppage, from, to); } }
fs/ocfs2/journal.c +0 -14
@@ -434,20 +434,6 @@ int ocfs2_journal_dirty(handle_t *handle,return status; } -#ifdef CONFIG_OCFS2_COMPAT_JBD -int ocfs2_journal_dirty_data (handle_t *handle, -struct buffer_head *bh) -{ -int err =journal_dirty_data (handle, bh); -if (err) -mlog_errno (err); -/* TODO: When we can handle it, abort the handle and go RO on -* error here. */ - -return err; -} -#endif -#define OCFS2_DEFAULT_COMMIT_INTERVAL (HZ * JBD2_DEFAULT_MAX_COMMIT_AGE)void ocfs2_set_journal_params (struct ocfs2_super *osb)
fs/ocfs2/journal.h +1 -10
@@ -27,12 +27,7 @@#define OCFS2_JOURNAL_H #include <linux/fs.h> -#ifndef CONFIG_OCFS2_COMPAT_JBD -# include <linux/jbd2.h> -#else -# include <linux/jbd.h> -# include "ocfs2_jbd_compat.h" -#endif +#include <linux/jbd2.h> enum ocfs2_journal_state {OCFS2_JOURNAL_FREE =0 ,
@@ -273,10 +268,6 @@ int ocfs2_journal_access(handle_t *handle,*/ int ocfs2_journal_dirty (handle_t *handle,struct buffer_head *bh); -#ifdef CONFIG_OCFS2_COMPAT_JBD -int ocfs2_journal_dirty_data (handle_t *handle, -struct buffer_head *bh); -#endif /* * Credit Macros:
fs/ocfs2/ocfs2_jbd_compat.h deleted +0 -82
82 lines not on this page · raw message
Signature · 1 line
1.5.4.1
PATCH 1/1 ocfs2: Remove JBD compatibility layer
Quoted 4 lines · Mark Fasheh
JBD2 is fully backwards compatible with JBD and it's been tested enough with Ocfs2 that we can clean this code up now.
Signed-off-by Mark Fasheh <[email protected]>
sob
Quoted 243 lines
--- fs/Kconfig | 10 ----- fs/ocfs2/alloc.c | 5 --- fs/ocfs2/aops.c | 24 +----------- fs/ocfs2/journal.c | 14 ------- fs/ocfs2/journal.h | 11 +----- fs/ocfs2/ocfs2_jbd_compat.h | 82 ------------------------------------------- 6 files changed, 3 insertions(+), 143 deletions(-) delete mode 100644 fs/ocfs2/ocfs2_jbd_compat.hfs/Kconfig +0
-10@@ -258,16 +258,6 @@ config OCFS2_DEBUG_FS this option for debugging only as it is likely to decrease performance of the filesystem. -config OCFS2_COMPAT_JBD - bool "Use JBD for compatibility" - depends on OCFS2_FS - default n - select JBD - help - The ocfs2 filesystem now uses JBD2 for its journalling. JBD2 - is backwards compatible with JBD. It is safe to say N here. - However, if you really want to use the original JBD, say Y here. - config OCFS2_FS_POSIX_ACL bool "OCFS2 POSIX Access Control Lists" depends on OCFS2_FSfs/ocfs2/alloc.c +0
-5@@ -6638,11 +6638,6 @@ static void ocfs2_map_and_dirty_page(struct inode *inode, handle_t *handle,mlog_errno (ret); else if (ocfs2_should_order_data(inode)) { ret =ocfs2_jbd2_file_inode (handle, inode); -#ifdef CONFIG_OCFS2_COMPAT_JBD - ret =walk_page_buffers (handle,page_buffers (page), - from, to, &partial, - ocfs2_journal_dirty_data); -#endif if (ret <0 )mlog_errno (ret); }fs/ocfs2/aops.c +2
-22@@ -474,12 +474,6 @@ handle_t *ocfs2_start_walk_page_trans(struct inode *inode,if (ocfs2_should_order_data (inode)) { ret =ocfs2_jbd2_file_inode (handle, inode); -#ifdef CONFIG_OCFS2_COMPAT_JBD - ret =walk_page_buffers (handle, -page_buffers (page), - from, to,NULL , - ocfs2_journal_dirty_data); -#endif if (ret <0 )mlog_errno (ret); }@@ -1065,15 +1059,8 @@ static void ocfs2_write_failure(struct inode *inode, tmppage = wc->w_pages[i];if (page_has_buffers (tmppage)) { -if (ocfs2_should_order_data (inode)) { +if (ocfs2_should_order_data (inode))ocfs2_jbd2_file_inode (wc->w_handle, inode); -#ifdef CONFIG_OCFS2_COMPAT_JBD -walk_page_buffers (wc->w_handle, -page_buffers (tmppage), - from, to,NULL , - ocfs2_journal_dirty_data); -#endif - }block_commit_write (tmppage, from, to); }@@ -1912,15 +1899,8 @@ int ocfs2_write_end_nolock(struct address_space *mapping, }if (page_has_buffers (tmppage)) { -if (ocfs2_should_order_data (inode)) { +if (ocfs2_should_order_data (inode))ocfs2_jbd2_file_inode (wc->w_handle, inode); -#ifdef CONFIG_OCFS2_COMPAT_JBD -walk_page_buffers (wc->w_handle, -page_buffers (tmppage), - from, to,NULL , - ocfs2_journal_dirty_data); -#endif - }block_commit_write (tmppage, from, to); } }fs/ocfs2/journal.c +0
-14@@ -434,20 +434,6 @@ int ocfs2_journal_dirty(handle_t *handle,return status; } -#ifdef CONFIG_OCFS2_COMPAT_JBD -int ocfs2_journal_dirty_data (handle_t *handle, -struct buffer_head *bh) -{ -int err =journal_dirty_data (handle, bh); -if (err) -mlog_errno (err); -/* TODO: When we can handle it, abort the handle and go RO on -* error here. */ - -return err; -} -#endif -#define OCFS2_DEFAULT_COMMIT_INTERVAL (HZ * JBD2_DEFAULT_MAX_COMMIT_AGE)void ocfs2_set_journal_params (struct ocfs2_super *osb)fs/ocfs2/journal.h +1
-10@@ -27,12 +27,7 @@#define OCFS2_JOURNAL_H #include <linux/fs.h> -#ifndef CONFIG_OCFS2_COMPAT_JBD -# include <linux/jbd2.h> -#else -# include <linux/jbd.h> -# include "ocfs2_jbd_compat.h" -#endif +#include <linux/jbd2.h> enum ocfs2_journal_state {OCFS2_JOURNAL_FREE =0 ,@@ -273,10 +268,6 @@ int ocfs2_journal_access(handle_t *handle,*/ int ocfs2_journal_dirty (handle_t *handle,struct buffer_head *bh); -#ifdef CONFIG_OCFS2_COMPAT_JBD -int ocfs2_journal_dirty_data (handle_t *handle, -struct buffer_head *bh); -#endif /* * Credit Macros: fs/ocfs2/ocfs2_jbd_compat.h deleted +0
-82@@ -1,82 +0,0 @@ -/* -*- mode: c; c-basic-offset: 8; -*- -* vim: noexpandtab sw=8 ts=8 sts=0: -* -* ocfs2_jbd_compat.h -* -* Compatibility defines for JBD. -* -* Copyright (C) 2008 Oracle. All rights reserved. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public -* License version 2 as published by the Free Software Foundation. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -* General Public License for more details. -*/ - -#ifndef OCFS2_JBD_COMPAT_H -#define OCFS2_JBD_COMPAT_H - -#ifndef CONFIG_OCFS2_COMPAT_JBD -# error Should not have been included -#endif - -struct jbd2_inode { -unsigned int dummy; -}; - -#define JBD2_BARRIER JFS_BARRIER -#define JBD2_DEFAULT_MAX_COMMIT_AGE JBD_DEFAULT_MAX_COMMIT_AGE - -#define jbd2_journal_ack_err journal_ack_err -#define jbd2_journal_clear_err journal_clear_err -#define jbd2_journal_destroy journal_destroy -#define jbd2_journal_dirty_metadata journal_dirty_metadata -#define jbd2_journal_errno journal_errno -#define jbd2_journal_extend journal_extend -#define jbd2_journal_flush journal_flush -#define jbd2_journal_force_commit journal_force_commit -#define jbd2_journal_get_write_access journal_get_write_access -#define jbd2_journal_get_undo_access journal_get_undo_access -#define jbd2_journal_init_inode journal_init_inode -#define jbd2_journal_invalidatepage journal_invalidatepage -#define jbd2_journal_load journal_load -#define jbd2_journal_lock_updates journal_lock_updates -#define jbd2_journal_restart journal_restart -#define jbd2_journal_start journal_start -#define jbd2_journal_start_commit journal_start_commit -#define jbd2_journal_stop journal_stop -#define jbd2_journal_try_to_free_buffers journal_try_to_free_buffers -#define jbd2_journal_unlock_updates journal_unlock_updates -#define jbd2_journal_wipe journal_wipe -#define jbd2_log_wait_commit log_wait_commit - -static inline int jbd2_journal_file_inode (handle_t *handle, -struct jbd2_inode *inode) -{ -return 0 ; -} - -static inline int jbd2_journal_begin_ordered_truncate (struct jbd2_inode *inode, -loff_t new_size) -{ -return 0 ; -} - -static inline void jbd2_journal_init_jbd_inode (struct jbd2_inode *jinode, -struct inode *inode) -{ -return ; -} - -static inline void jbd2_journal_release_jbd_inode (journal_t *journal, -struct jbd2_inode *jinode) -{ -return ; -} - - -#endif /* OCFS2_JBD_COMPAT_H */ Signature · 1 line
1.5.4.1
Signature · 9 lines
Life's Little Instruction Book #139 "Never deprive someone of hope; it might be all they have." Joel Becker Principal Software Developer Oracle E-mail: joel.becker at oracle.com Phone: (650) 506-8127