OMAP3: Fix gpmc_cs_base pointer math in NAND

gpmc_cs_base is an uint32_t pointer, correct pointer math. Missed after readl/writel conversion.

---

Changes in v2:

- Correct patch header style.

v2 of this patch makes previous version v1 obsolete.

Jean-Christophe: Would be nice if you could handle this patch with priority as it prevents BeagleBoard from starting. Thanks!

 drivers/mtd/nand/omap_gpmc.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

Index: u-boot-arm/drivers/mtd/nand/omap_gpmc.c
===================================================================
@@ -48,13 +48,13 @@ static void omap_nand_hwcontrol(struct m
 	 */
 	switch (ctrl) {
 	case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
-		this->IO_ADDR_W = gpmc_cs_base + GPMC_NAND_CMD;
+		this->IO_ADDR_W = gpmc_cs_base + OFFS(GPMC_NAND_CMD);
 		break;
 	case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
-		this->IO_ADDR_W = gpmc_cs_base + GPMC_NAND_ADR;
+		this->IO_ADDR_W = gpmc_cs_base + OFFS(GPMC_NAND_ADR);
 		break;
 	case NAND_CTRL_CHANGE | NAND_NCE:
-		this->IO_ADDR_W = gpmc_cs_base + GPMC_NAND_DAT;
+		this->IO_ADDR_W = gpmc_cs_base + OFFS(GPMC_NAND_DAT);
 		break;
 	}
 

@@ -321,8 +321,8 @@ int board_nand_init(struct nand_chip *na
 	gpmc_config |= 0x10;
 	writel(gpmc_config, gpmc_base + OFFS(GPMC_CONFIG));
 
-	nand->IO_ADDR_R = gpmc_cs_base + GPMC_NAND_DAT;
-	nand->IO_ADDR_W = gpmc_cs_base + GPMC_NAND_CMD;
+	nand->IO_ADDR_R = gpmc_cs_base + OFFS(GPMC_NAND_DAT);
+	nand->IO_ADDR_W = gpmc_cs_base + OFFS(GPMC_NAND_CMD);
 
 	nand->cmd_ctrl = omap_nand_hwcontrol;
 	nand->options = NAND_NO_PADDING | NAND_CACHEPRG | NAND_NO_AUTOINCR |

I've try to apply it but

OMAP3: Fix error in gpmc_init

Fix error in gpmc_init() introduced with readl/writel conversion. Use base addresses + offset, not offset only. Minor clean up by removing unused code.

--------------------------
Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all y
Applying OMAP3: Fix error in gpmc_init
error: patch failed: cpu/arm_cortexa8/omap3/mem.c:233
error: cpu/arm_cortexa8/omap3/mem.c: patch does not apply
fatal: sha1 information is lacking or useless (cpu/arm_cortexa8/omap3/mem.c). Repository lacks necessary blobs to fall back on 3-way merge. Cannot fall back to three-way merge.
Patch failed at 0003.
When you have resolved this problem run "git-am -i -3 --resolved". If you would prefer to skip this patch, instead run "git-am -i -3 --skip".

could you rebase it and specify the patch apply order via [PATCH X/X]

Best Regards,
J.