Initial support for Nomadik 8815 development

index 127604b..e2a90d2 100644
@@ -581,6 +581,11 @@ Stefan Roese <[email protected]>
 	pdnb3		xscale
 	scpu		xscale
 
+Alessandro Rubini <[email protected]>
+Nomadik Linux Team <[email protected]>
+
+	nmdk8815	ARM926EJS (Nomadik 8815 Soc)
+
 Robert Schwebel <[email protected]>
 
 	csb226		xscale

index dbed268..a209a4d 100755
@@ -487,6 +487,7 @@ LIST_ARM9="			\
 	mx1ads			\
 	mx1fs2			\
 	netstar			\
+	nmdk8815		\
 	omap1510inn		\
 	omap1610h2		\
 	omap1610inn		\

index fd521b6..de6e6ab 100644
@@ -2644,6 +2644,17 @@ mx1fs2_config	:	unconfig
 netstar_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm925t netstar
 
+nmdk8815_config \
+nmdk8815_onenand_config:	unconfig
+	@ > $(obj)include/config.h
+	@if [ "$(findstring _onenand, $@)" ] ; then \
+		echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
+		$(XECHO) "... configured for OneNand Flash"; \
+	else \
+		$(XECHO) "... configured for Nand Flash"; \
+	fi
+	@$(MKCONFIG) -a nmdk8815 arm arm926ejs nmdk8815 st nomadik
+
 omap1510inn_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
 

55 lines not on this page · raw message

new file mode 100644
index 0000000..590393b
@@ -0,0 +1,26 @@
+# (C) Copyright 2007
+# STMicroelectronics, <www.st.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# image should be loaded at 0x01000000
+#
+
+TEXT_BASE = 0x03F80000

345 lines not on this page · raw message

51 lines not on this page · raw message

46 lines not on this page · raw message

new file mode 100644
index 0000000..522a817
@@ -0,0 +1,27 @@
+#include <config.h>
+/*
+ * Processor reset for Nomadik
+ */
+
+        .align  5
+.globl reset_cpu
+reset_cpu:
+#if defined CONFIG_NOMADIK_8815
+        ldr r0, =NOMADIK_SRC_BASE
+        ldr r1, =0x1
+        str r1, [r0, #0x18]
+#else
+        ldr     r1, rstctl1     /* get clkm1 reset ctl */
+        mov     r3, #0x0
+        strh    r3, [r1]        /* clear it */
+        mov     r3, #0x8
+        strh    r3, [r1]        /* force dsp+arm reset */
+#endif
+_loop_forever:
+        b       _loop_forever
+
+
+rstctl1:
+        .word   0xfffece10
+
+

new file mode 100644
index 0000000..453cfae
@@ -0,0 +1,22 @@
+
+The Nomadik 8815 CPU has a "secure" boot mode where no external access
+(not even JTAG) is allowed.  The "remap" bits in the evaluation board
+are configured in order to boot from the internal ROM memory (in
+secure mode).
+
+The boot process as defined by the manufacturer executes external code
+(loaded from NAND or OneNAND) that that disables such "security" in
+order to run u-boot and later the kernel without constraints. Such
+code is a proprietary initial boot loader, called "X-Loader" (in case
+anyone wonders, it has no relations with other loaders with the same
+name and there is no GPL code inside the ST X-Loader).
+
+SDRAM configuration, PLL setup and initial loading from NAND is
+implemented in the X-Loader, so U-Boot is already running in SDRAM
+when control is handed over to it.
+
+
+On www.st.com/nomadik and on www.stnwireless.com there are documents,
+summary data and white papers on Nomadik. The full datasheet for
+STn8815 is not currently available on line but under specific request
+to the local ST sales offices.