Skip to contentSkip to conversation

x86: correct link to HPET timer specification

PATCH Applied Denis V. Lunev 2 participants 2 messages Nov 24, 2008

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 x86: correct link to HPET timer specification

Original link is dead.

---
 arch/x86/Kconfig    |    2 +-
 drivers/char/hpet.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/x86/Kconfig +1 -1
index ac22bb7..19f0d97 100644
@@ -482,7 +482,7 @@ config HPET_TIMER
          The HPET provides a stable time base on SMP
          systems, unlike the TSC, but it is more expensive to access,
          as it is off-chip.  You can find the HPET spec at
-         <http://www.intel.com/hardwaredesign/hpetspec.htm>.
+         <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
 
          You can safely choose Y here.  However, HPET will only be
          activated if the platform and the BIOS support this feature.
drivers/char/hpet.c +1 -1
index 53fdc7f..32b8bbf 100644
@@ -46,7 +46,7 @@
 /*
  * The High Precision Event Timer driver.
  * This driver is closely modelled after the rtc.c driver.
- * http://www.intel.com/hardwaredesign/hpetspec.htm
+ * http://www.intel.com/hardwaredesign/hpetspec_1.pdf
  */
 #define	HPET_USER_FREQ	(64)
 #define	HPET_DRIFT	(500)
Signature · 1 line
1.5.6.4
Applied
#1 lore raw
Quoted 7 lines · Denis V. Lunev

Original link is dead.

---
 arch/x86/Kconfig    |    2 +-
 drivers/char/hpet.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

applied to tip/timers/hpe, thanks Denis!

Ingo