SGI RTC: add clocksource/clockevent driver and generic timer vector
Subsystems (5)
v4 cover SGI RTC: add clocksource/clockevent driver and generic timer vector
The following patches provide a driver for synchronized RTC clocksource and clockevents for SGI systems, as well as a generic timer system interrupt.
With these patches, a module can be installed that registers the system-wide synchronized RTC clocksource and timers as both a clocksource and clockevents device running in high resolution mode.
[PATCH 1/2 v4] SGI RTC: add generic timer system interrupt [PATCH 2/2 v4] SGI RTC: add clocksource driver
PATCH v4 1/2 SGI RTC: add generic timer system interrupt
This patch allocates a system interrupt vector for platform specific use in implementing timer interrupts.
---
Changed register/unregister function names.
arch/x86/include/asm/hw_irq.h | 1 arch/x86/include/asm/irq.h | 2 + arch/x86/include/asm/irq_vectors.h | 5 +++ arch/x86/kernel/entry_64.S | 4 ++ arch/x86/kernel/irqinit_64.c | 45 +++++++++++++++++++++++++++++++++ 5 files changed, 57 insertions(+)
arch/x86/kernel/entry_64.S +4 -0
@@ -865,6 +865,10 @@ ENTRY(apic_timer_interrupt) apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt END(apic_timer_interrupt) +ENTRY(generic_timer_interrupt) + apicinterrupt GENERIC_TIMER_VECTOR,smp_generic_timer_interrupt +END(generic_timer_interrupt) + ENTRY(uv_bau_message_intr1) apicinterrupt 220,uv_bau_message_interrupt END(uv_bau_message_intr1)
arch/x86/kernel/irqinit_64.c +45 -0
63 lines not on this page · raw message
arch/x86/include/asm/irq_vectors.h +5 -0
@@ -92,6 +92,11 @@#define LOCAL_PERFMON_VECTOR 0xee/* +* Generic timer vector for platform specific use +*/ +#define GENERIC_TIMER_VECTOR 0xed + +/* * First APIC vector available to drivers: (vectors 0x30-0xee) we * start at 0x31(0x41) to spread out vectors evenly between priority * levels. (0x80 is the syscall vector)
arch/x86/include/asm/hw_irq.h +1 -0
@@ -29,6 +29,7 @@/* Interrupt handlers registered during init_IRQ */ extern void apic_timer_interrupt (void ); +extern void generic_timer_interrupt (void );extern void error_interrupt (void );extern void spurious_interrupt (void );extern void thermal_interrupt (void );
arch/x86/include/asm/irq.h +2 -0
@@ -38,6 +38,8 @@ extern void fixup_irqs(cpumask_t map);extern unsigned int do_IRQ (struct pt_regs *regs);extern void init_IRQ (void ); +extern int register_generic_timer_extension (void (*fn)(void )); +extern void unregister_generic_timer_extension (void );extern void native_init_IRQ (void );/* Interrupt vector management */
PATCH v4 2/2 SGI RTC: add clocksource driver
This patch provides a driver for SGI RTC clocks and timers.
This provides a high resolution clock and timer source using the SGI system-wide synchronized RTC clock/timer hardware.
---
Changed the shift values for clocksource and clockevent. Made other stylistic changes.
drivers/clocksource/Makefile | 1 drivers/clocksource/rtc_uv.c | 410 +++++++++++++++++++++++++++++++++++++++ drivers/misc/Kconfig | 9 kernel/time/clockevents.c | 1 kernel/time/clocksource.c | 1 5 files changed, 422 insertions(+)
drivers/clocksource/Makefile +1 -0
@@ -2,3 +2,4 @@ obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_cl obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o +obj-$(CONFIG_SGI_RTC_TIMER) += rtc_uv.o
drivers/misc/Kconfig +9 -0
@@ -498,6 +498,15 @@ config SGI_GRU_DEBUG This option enables addition debugging code for the SGI GRU driver. If you are unsure, say N. +config SGI_RTC_TIMER + tristate "SGI RTC driver" + depends on GENERIC_CLOCKEVENTS_BUILD + depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP + default m + ---help--- + This option enables RTC event handling and adds the systemwide RTC + as a high resolution clock source for SGI systems. + source "drivers/misc/c2port/Kconfig" endif # MISC_DEVICES
drivers/clocksource/rtc_uv.c new file +410 -0
410 lines not on this page · raw message
kernel/time/clockevents.c +1 -0
@@ -183,6 +183,7 @@ void clockevents_register_device(structspin_unlock (&clockevents_lock); } +EXPORT_SYMBOL_GPL (clockevents_register_device);/* * Noop handler when we shut down an event device
kernel/time/clocksource.c +1 -0
@@ -369,6 +369,7 @@ void clocksource_unregister(struct clock next_clocksource =select_clocksource ();spin_unlock_irqrestore (&clocksource_lock, flags); } +EXPORT_SYMBOL (clocksource_unregister);#ifdef CONFIG_SYSFS /**
Re: [PATCH 2/2 v4] SGI RTC: add clocksource driver
Quoted 12 lines · Dimitri Sivanich
This patch provides a driver for SGI RTC clocks and timers.
This provides a high resolution clock and timer source using the SGI system-wide synchronized RTC clock/timer hardware.
Signed-off-by Dimitri Sivanich <[email protected]>---
Changed the shift values for clocksource and clockevent. Made other stylistic changes.
[snip]
drivers/clocksource/rtc_uv.c line 47
Quoted 8 lines
drivers/clocksource/rtc_uv.c new file +8
-0+static struct clocksource clocksource_uv = { + .name =RTC_NAME , + .rating =400 , + .read = uv_read_rtc, + .mask = (cycle_t )UVH_RTC_REAL_TIME_CLOCK_MASK , + .shift =10 , + .flags =CLOCK_SOURCE_IS_CONTINUOUS , +};
Hey Dimitri,
Sorry for being slow to catch this. This address my earlier concerns.
Thanks!
-john