2.6.28-rc regression: digital audio inactive after resume from suspend
Hi,
the digital audio out (optical) is inactive (no red light, and therefore silent) after resume from suspend on my Mac mini Core Duo. When I disable and enable the IEC958 toggle, it works again.
This didn't happen with 2.6.27. Currently, I use 2.6.28-rc6 as of commit ged31348.
This is the hardware in lspci:
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Sigmatel Device [8384:7680]
Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at 90440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
The dmesg output with 2.6.27 and 2.6.28-rc are here:
http://tikei.de/dmesg_2.6.27.5
http://tikei.de/dmesg_2.6.28-rc6
Regards,
Tino
At Mon, 24 Nov 2008 22:22:25 +0100,
Quoted 21 lines · Tino Keitel
Hi,
the digital audio out (optical) is inactive (no red light, and therefore silent) after resume from suspend on my Mac mini Core Duo. When I disable and enable the IEC958 toggle, it works again.
This didn't happen with 2.6.27. Currently, I use 2.6.28-rc6 as of commit ged31348.
This is the hardware in lspci:
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Sigmatel Device [8384:7680]
Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at 90440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
Quoted 4 lines
The dmesg output with 2.6.27 and 2.6.28-rc are here:
http://tikei.de/dmesg_2.6.27.5
http://tikei.de/dmesg_2.6.28-rc6
Could you run alsa-info.sh with --no-upload option on both kernels and attach the generated files? The script is found at
http://www.alsa-project.org/alsa-info.sh
thanks,
Takashi
Quoted 23 lines · Takashi Iwai
At Mon, 24 Nov 2008 22:22:25 +0100,
Quoted 21 lines · Tino Keitel
Hi,
the digital audio out (optical) is inactive (no red light, and therefore silent) after resume from suspend on my Mac mini Core Duo. When I disable and enable the IEC958 toggle, it works again.
This didn't happen with 2.6.27. Currently, I use 2.6.28-rc6 as of commit ged31348.
This is the hardware in lspci:
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Sigmatel Device [8384:7680]
Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at 90440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
Quoted 8 lines
Quoted 4 lines
The dmesg output with 2.6.27 and 2.6.28-rc are here:
http://tikei.de/dmesg_2.6.27.5
http://tikei.de/dmesg_2.6.28-rc6Could you run
alsa-info.shwith --no-upload option on both kernels and attach the generated files? The script is found at
http://www.alsa-project.org/alsa-info.sh
http://tikei.de/alsa-info-2.6.27.5.txt
http://tikei.de/alsa-info-2.6.28-broken.txt
http://tikei.de/alsa-info-2.6.28-fixed.txt (here I unchecked/rechecked the IEC958 toggle)
Regards,
Tino
At Tue, 25 Nov 2008 08:03:12 +0100,
Quoted 30 lines · Tino Keitel
Quoted 28 lines · Takashi Iwai
At Mon, 24 Nov 2008 22:22:25 +0100,
Quoted 25 lines · Tino Keitel
Hi,
the digital audio out (optical) is inactive (no red light, and therefore silent) after resume from suspend on my Mac mini Core Duo. When I disable and enable the IEC958 toggle, it works again.
This didn't happen with 2.6.27. Currently, I use 2.6.28-rc6 as of commit ged31348.
This is the hardware in lspci:
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Sigmatel Device [8384:7680]
Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at 90440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intelThe dmesg output with 2.6.27 and 2.6.28-rc are here:
http://tikei.de/dmesg_2.6.27.5
http://tikei.de/dmesg_2.6.28-rc6
Quoted 8 lines
Quoted 3 lines
Could you run
alsa-info.shwith --no-upload option on both kernels and attach the generated files? The script is found at
http://www.alsa-project.org/alsa-info.shhttp://tikei.de/alsa-info-2.6.27.5.txt
http://tikei.de/alsa-info-2.6.28-broken.txt
http://tikei.de/alsa-info-2.6.28-fixed.txt (here I unchecked/rechecked the IEC958 toggle)
Could you try the patch below?
thanks,
Takashi
---
sound/pci/hda/hda_codec.c +2 -2
@@ -1436,12 +1436,12 @@ static void set_dig_out(struct hda_codec *codec, hda_nid_t nid, {hda_nid_t *d; -snd_hda_codec_write (codec, nid,0 , verb, val); +snd_hda_codec_write_cache (codec, nid,0 , verb, val); d = codec->slave_dig_outs;if (!d)return ;for (; *d; d++) -snd_hda_codec_write (codec, *d,0 , verb, val); +snd_hda_codec_write_cache (codec, *d,0 , verb, val); } static inline void set_dig_out_convert(struct hda_codec *codec, hda_nid_t nid,
On Tue, Nov 25, 2008 at 08:15:36 +0100, Takashi Iwai wrote:
[...]
Quoted 1 line
Could you try the patch below?
This patch fixed it, thanks.
Regards,
Tino