igb: Add support for pci-e Advanced Error Reporting

index 0919a2f..ea4ef18 100644
@@ -42,6 +42,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/if_ether.h>
+#include <linux/aer.h>
 #ifdef CONFIG_IGB_DCA
 #include <linux/dca.h>
 #endif

@@ -1049,6 +1050,8 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_pci_reg;
 
+	pci_enable_pcie_error_reporting(pdev);
+
 	pci_set_master(pdev);
 	pci_save_state(pdev);
 

@@ -1379,6 +1382,8 @@ static void __devexit igb_remove(struct pci_dev *pdev)
 
 	free_netdev(netdev);
 
+	pci_disable_pcie_error_reporting(pdev);
+
 	pci_disable_device(pdev);
 }
 

@@ -4474,27 +4479,33 @@ static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	pci_ers_result_t result;
 	int err;
 
 	if (adapter->need_ioport)
 		err = pci_enable_device(pdev);
 	else
 		err = pci_enable_device_mem(pdev);
+
 	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot re-enable PCI device after reset.\n");
-		return PCI_ERS_RESULT_DISCONNECT;
-	}
-	pci_set_master(pdev);
-	pci_restore_state(pdev);
+		result = PCI_ERS_RESULT_DISCONNECT;
+	} else {
+		pci_set_master(pdev);
+		pci_restore_state(pdev);
 
-	pci_enable_wake(pdev, PCI_D3hot, 0);
-	pci_enable_wake(pdev, PCI_D3cold, 0);
+		pci_enable_wake(pdev, PCI_D3hot, 0);
+		pci_enable_wake(pdev, PCI_D3cold, 0);
 
-	igb_reset(adapter);
-	wr32(E1000_WUS, ~0);
+		igb_reset(adapter);
+		wr32(E1000_WUS, ~0);
+		result = PCI_ERS_RESULT_RECOVERED;
+	}
 
-	return PCI_ERS_RESULT_RECOVERED;
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+
+	return result;
 }
 
 /**

@@ -4522,7 +4533,6 @@ static void igb_io_resume(struct pci_dev *pdev)
 	/* let the f/w know that the h/w is now under the control of the
 	 * driver. */
 	igb_get_hw_control(adapter);
-
 }
 
 /* igb_main.c */