sparc: fix boot regression
PATCH 1/1 sparc: fix boot regression
From e3b6fc4081669054768f93ea2605d1eba8e1b256 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <[email protected]>
Date: Mon, 1 Dec 2008 19:41:49 +0100
Subject: [PATCH] sparc: fix boot regression
Robert reported that 21cb8a43216e0595b466e903e0f2a7ae615d9e11 ("sparc: refactor Makefile") caused a boot regression on sparc. We tracked it down to the removal of the export of kallsyms.o.
This patch adds back the export and the code that was removed in a subsequent commit which uses the exported variable. Why this caused a boot regression is not understood atm.
Robert tested a simpler version of this patch and reported success.
---
The patch is made on top of sparc-next.
Robert - I would appreciate if you could retest on top of sparc-next and confirm that the boot regression is really fixed there.
I added a "Tested-by" since you tested the first version but would like you to really test this before Dave apply it.
Note: Applying this will most likely cause a few trivial conflicts that I posted yesterday.
But lets sort out this and then revisit that patch-set.
Thanks,
Sam
arch/sparc/Makefile | 4 ++++ arch/sparc/boot/Makefile | 2 +- 2 files changed, 5 insertions(+), 1 deletions(-)
arch/sparc/Makefile +4 -0
@@ -89,6 +89,10 @@ VMLINUX_MAIN := $(core-y) kernel/ mm/ fs/ ipc/ security/ crypto/ block/ VMLINUX_MAIN += $(patsubst %/, %/lib.a, $(libs-y)) $(libs-y) VMLINUX_MAIN += $(drivers-y) $(net-y) +ifdef CONFIG_KALLSYMS +export kallsyms.o := .tmp_kallsyms2.o +endif + boot-y := arch/sparc/boot boot-$(CONFIG_SPARC64) := arch/sparc64/boot
arch/sparc/boot/Makefile +1 -1
@@ -42,7 +42,7 @@ BTOBJS := $(patsubst %/, %/built-in.o, $(VMLINUX_INIT)) BTLIBS := $(patsubst %/, %/built-in.o, $(VMLINUX_MAIN)) LDFLAGS_image := -T arch/sparc/kernel/vmlinux.lds $(BTOBJS) \ --start-group $(BTLIBS) --end-group \ - $(obj)/btfix.o + $(kallsyms.o) $(obj)/btfix.o # Link the final image including btfixup'ed symbols. # This is a replacement for the link done in the top-level Makefile.
Signature · 1 line
1.5.6.GIT
Quoted 61 lines · Sam Ravnborg
Quoted 1 line
From
e3b6fc4081669054768f93ea2605d1eba8e1b256Mon Sep 17 00:00:00 2001From: Sam Ravnborg <[email protected]>
Date: Mon, 1 Dec 2008 19:41:49 +0100
Subject: [PATCH] sparc: fix boot regressionRobert reported that
21cb8a43216e0595b466e903e0f2a7ae615d9e11("sparc: refactorMakefile") caused a boot regression on sparc. We tracked it down to the removal of the export of kallsyms.o.This patch adds back the export and the code that was removed in a subsequent commit which uses the exported variable. Why this caused a boot regression is not understood atm.
Robert tested a simpler version of this patch and reported success.
Reported-by Robert Reif <[email protected]>Tested-by Robert Reif <[email protected]>Signed-off-by Sam Ravnborg <[email protected]>---
The patch is made on top of sparc-next.
Robert - I would appreciate if you could retest on top of sparc-next and confirm that the boot regression is really fixed there.
I added a "Tested-by" since you tested the first version but would like you to really test this before Dave apply it.Note: Applying this will most likely cause a few trivial conflicts that I posted yesterday.
But lets sort out this and then revisit that patch-set.Thanks,
Sam
arch/sparc/Makefile | 4 ++++ arch/sparc/boot/Makefile | 2 +- 2 files changed, 5 insertions(+), 1 deletions(-)arch/sparc/Makefile +4
-0@@ -89,6 +89,10 @@ VMLINUX_MAIN := $(core-y) kernel/ mm/ fs/ ipc/ security/ crypto/ block/ VMLINUX_MAIN += $(patsubst %/, %/lib.a, $(libs-y)) $(libs-y) VMLINUX_MAIN += $(drivers-y) $(net-y) +ifdef CONFIG_KALLSYMS +export kallsyms.o := .tmp_kallsyms2.o +endif + boot-y := arch/sparc/boot boot-$(CONFIG_SPARC64) := arch/sparc64/bootarch/sparc/boot/Makefile +0
-0
arch/sparc/boot/Makefile BTOBJS := $(patsubst %/, %/built-in.o, $(VMLINUX_INIT)) · line 48
Quoted 8 lines
arch/sparc/boot/Makefile +1
-1@@ -42,7 +42,7 @@ BTOBJS := $(patsubst %/, %/built-in.o, $(VMLINUX_INIT)) BTLIBS := $(patsubst %/, %/built-in.o, $(VMLINUX_MAIN)) LDFLAGS_image := -T arch/sparc/kernel/vmlinux.lds $(BTOBJS) \ --start-group $(BTLIBS) --end-group \ - $(obj)/btfix.o + $(kallsyms.o) $(obj)/btfix.o # Link the final image including btfixup'ed symbols. # This is a replacement for the link done in the top-level Makefile
This patch also works.
From: Robert Reif <[email protected]>
Date: Mon, 01 Dec 2008 20:21:40 -0500
Quoted 25 lines
Quoted 24 lines · Sam Ravnborg
Quoted 1 line
From
e3b6fc4081669054768f93ea2605d1eba8e1b256Mon Sep 17 00:00:00 2001From: Sam Ravnborg <[email protected]>
Date: Mon, 1 Dec 2008 19:41:49 +0100
Subject: [PATCH] sparc: fix boot regressionRobert reported that
21cb8a43216e0595b466e903e0f2a7ae615d9e11("sparc: refactorMakefile") caused a boot regression on sparc. We tracked it down to the removal of the export of kallsyms.o.This patch adds back the export and the code that was removed in a subsequent commit which uses the exported variable. Why this caused a boot regression is not understood atm.
Robert tested a simpler version of this patch and reported success.
Reported-by Robert Reif <[email protected]>Tested-by Robert Reif <[email protected]>Signed-off-by Sam Ravnborg <[email protected]>---
The patch is made on top of sparc-next.
Robert - I would appreciate if you could retest on top of sparc-next and confirm that the boot regression is really fixed there.
...
Quoted 1 line
This patch also works.
Applied, thanks everyone.