Skip to contentSkip to conversation

pl2303 - pl2303_open - failed submitting interrupt urb, error -28

DISCUSSION Marc Haber 4 participants 7 messages Dec 2, 2008 – Dec 10, 2008

lore
Share & tools
lore

Marc Haber

author
#0 lore raw

Hi,

the following applies to a "vanilla" 2.6.27.7 kernel built and running on a Debian unstable system.

To obtain out-of-band access to a number of switches and routers, I have a seven-port USB hub to which seven identical USB-to-serial adaptors using the PL2303 chip and driver are connected. All seven work when only one of them is used at a time.

Cereal is an application which keeps a process (GNU screen) attached to the tty at all times to be able to log what happens on the serial port. When I start cereal on all seven ports, I start getting "pl2303_open - failed submitting interrupt urb, error -28" errors in my syslog:

Dec  2 14:07:36 alemana kernel: pl2303 ttyUSB2: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:37 alemana kernel: pl2303 ttyUSB5: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:38 alemana kernel: pl2303 ttyUSB6: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:41 alemana kernel: pl2303 ttyUSB2: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:43 alemana kernel: pl2303 ttyUSB5: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:43 alemana kernel: pl2303 ttyUSB6: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:47 alemana kernel: pl2303 ttyUSB2: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:48 alemana kernel: pl2303 ttyUSB5: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:49 alemana kernel: pl2303 ttyUSB6: pl2303_open - failed submitting interrupt urb, error -28

The corresponding ports are not useable in that case.

When one googles for this error message, one finds a thread from 2006 with Greg KH commenting. In my case, the error doesn't hose the USB subsystem, I can unplug the adapters and plug them in again one and a time without a problem, and I can even use the ports that don't throw this error message.

As in the 2006 thread, unloading the EHCI driver (ehci_hcd) solves the issue, but is of course not an attractive option as soon as one wants to use even a USB stick on the same machine.

If it helps, I can give out root access to the box in question to anybody who is willing to help and debug. Unfortunately, I cannot provide any expertise here, I do not even know what an interrupt urb is.

Any hints will be appreciated.

Greetings
Marc

Signature · 4 lines
-----------------------------------------------------------------------------
Marc Haber         | "I don't trust Computers. They | Mailadresse im Header
Mannheim, Germany  |  lose things."    Winona Ryder | Fon: *49 621 72739834
Nordisch by Nature |  How to make an American Quilt | Fax: *49 3221 2323190
#1 lore raw

(cc linux-usb)

Quoted 46 lines · On Tue, 2 Dec 2008 14:18:21 +0100 Marc Haber <[email protected]>…

Hi,

the following applies to a "vanilla" 2.6.27.7 kernel built and running on a Debian unstable system.

To obtain out-of-band access to a number of switches and routers, I have a seven-port USB hub to which seven identical USB-to-serial adaptors using the PL2303 chip and driver are connected. All seven work when only one of them is used at a time.

Cereal is an application which keeps a process (GNU screen) attached to the tty at all times to be able to log what happens on the serial port. When I start cereal on all seven ports, I start getting "pl2303_open - failed submitting interrupt urb, error -28" errors in my syslog:

Dec  2 14:07:36 alemana kernel: pl2303 ttyUSB2: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:37 alemana kernel: pl2303 ttyUSB5: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:38 alemana kernel: pl2303 ttyUSB6: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:41 alemana kernel: pl2303 ttyUSB2: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:43 alemana kernel: pl2303 ttyUSB5: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:43 alemana kernel: pl2303 ttyUSB6: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:47 alemana kernel: pl2303 ttyUSB2: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:48 alemana kernel: pl2303 ttyUSB5: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:49 alemana kernel: pl2303 ttyUSB6: pl2303_open - failed submitting interrupt urb, error -28

The corresponding ports are not useable in that case.

When one googles for this error message, one finds a thread from 2006 with Greg KH commenting. In my case, the error doesn't hose the USB subsystem, I can unplug the adapters and plug them in again one and a time without a problem, and I can even use the ports that don't throw this error message.

As in the 2006 thread, unloading the EHCI driver (ehci_hcd) solves the issue, but is of course not an attractive option as soon as one wants to use even a USB stick on the same machine.

If it helps, I can give out root access to the box in question to anybody who is willing to help and debug. Unfortunately, I cannot provide any expertise here, I do not even know what an interrupt urb is.

Any hints will be appreciated.

Greetings
Marc

#2 lore raw
Quoted 41 lines · Andrew Morton

(cc linux-usb)

Quoted 37 lines · On Tue, 2 Dec 2008 14:18:21 +0100 Marc Haber <[email protected]>…

Hi,

the following applies to a "vanilla" 2.6.27.7 kernel built and running on a Debian unstable system.

To obtain out-of-band access to a number of switches and routers, I have a seven-port USB hub to which seven identical USB-to-serial adaptors using the PL2303 chip and driver are connected. All seven work when only one of them is used at a time.

Cereal is an application which keeps a process (GNU screen) attached to the tty at all times to be able to log what happens on the serial port. When I start cereal on all seven ports, I start getting "pl2303_open - failed submitting interrupt urb, error -28" errors in my syslog:

Dec  2 14:07:36 alemana kernel: pl2303 ttyUSB2: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:37 alemana kernel: pl2303 ttyUSB5: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:38 alemana kernel: pl2303 ttyUSB6: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:41 alemana kernel: pl2303 ttyUSB2: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:43 alemana kernel: pl2303 ttyUSB5: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:43 alemana kernel: pl2303 ttyUSB6: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:47 alemana kernel: pl2303 ttyUSB2: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:48 alemana kernel: pl2303 ttyUSB5: pl2303_open - failed submitting interrupt urb, error -28
Dec  2 14:07:49 alemana kernel: pl2303 ttyUSB6: pl2303_open - failed submitting interrupt urb, error -28

The corresponding ports are not useable in that case.

When one googles for this error message, one finds a thread from 2006 with Greg KH commenting. In my case, the error doesn't hose the USB subsystem, I can unplug the adapters and plug them in again one and a time without a problem, and I can even use the ports that don't throw this error message.

As in the 2006 thread, unloading the EHCI driver (ehci_hcd) solves the issue, but is of course not an attractive option as soon as one wants to use even a USB stick on the same machine.

I would suggest using a USB 1.1 hub instead if you have to use this kind of hardware set up. I think the core is just not able to schedule so many interrupt urbs with such a setup, running USB 1.1 devices behind a USB 2.0 hub like this is a very difficult thing to do.

Sorry I don't have a better solution.

thanks,

greg k-h

author
#3 lore raw
Quoted 2 lines · Greg KH

I would suggest using a USB 1.1 hub instead if you have to use this kind of hardware set up.

It is nearly impossible to buy that kind of hardware at the current time.

Quoted 5 lines

I think the core is just not able to schedule so many interrupt urbs with such a setup, running USB 1.1 devices behind a USB 2.0 hub like this is a very difficult thing to do.

Sorry I don't have a better solution.

Is it possible to disable USB 2.0 for selected links?

Greetings
Marc

Signature · 4 lines
-----------------------------------------------------------------------------
Marc Haber         | "I don't trust Computers. They | Mailadresse im Header
Mannheim, Germany  |  lose things."    Winona Ryder | Fon: *49 621 72739834
Nordisch by Nature |  How to make an American Quilt | Fax: *49 3221 2323190
#4 lore raw
Quoted 7 lines · Marc Haber
Quoted 2 lines · Greg KH

I would suggest using a USB 1.1 hub instead if you have to use this kind of hardware set up.

It is nearly impossible to buy that kind of hardware at the current time.

Quoted 7 lines
Quoted 5 lines

I think the core is just not able to schedule so many interrupt urbs with such a setup, running USB 1.1 devices behind a USB 2.0 hub like this is a very difficult thing to do.

Sorry I don't have a better solution.

Is it possible to disable USB 2.0 for selected links?

Yes it is. You can force port P of the EHCI controller on bus B to run at low/full speed by doing:

echo P >/sys/class/usb_host/usb_hostB/companion

To allow port P to run at high speed again, use the same command but write -P instead of P.

Alan Stern

author
#5 lore raw
Quoted 7 lines · Alan Stern

Yes it is. You can force port P of the EHCI controller on bus B to run at low/full speed by doing:

echo P >/sys/class/usb_host/usb_hostB/companion

To allow port P to run at high speed again, use the same command but write -P instead of P.

I will try that and report back.

Greetings
Marc

Signature · 4 lines
-----------------------------------------------------------------------------
Marc Haber         | "I don't trust Computers. They | Mailadresse im Header
Mannheim, Germany  |  lose things."    Winona Ryder | Fon: *49 621 72739834
Nordisch by Nature |  How to make an American Quilt | Fax: *49 3221 2323190
author
#6 lore raw
Quoted 10 lines · Marc Haber
Quoted 7 lines · Alan Stern

Yes it is. You can force port P of the EHCI controller on bus B to run at low/full speed by doing:

echo P >/sys/class/usb_host/usb_hostB/companion

To allow port P to run at high speed again, use the same command but write -P instead of P.

I will try that and report back.

Works fine, thanks!

Greetings
Marc

Signature · 4 lines
-----------------------------------------------------------------------------
Marc Haber         | "I don't trust Computers. They | Mailadresse im Header
Mannheim, Germany  |  lose things."    Winona Ryder | Fon: *49 621 72739834
Nordisch by Nature |  How to make an American Quilt | Fax: *49 3221 2323190