Skip to contentSkip to conversation

sh: sh7343 and se7343 patches

PATCH Applied Magnus Damm 2 participants 2 messages Dec 4, 2008 SuperH

lore
Share & tools
lore
#0 lore raw

cover sh: sh7343 and se7343 patches

sh7343 and se7343 patches:

[PATCH 01/06] sh: sh7343 scif configuration update [PATCH 02/06] sh: fix number of interrupts on se7343 [PATCH 03/06] sh: add st16c2550 devices to se7343 [PATCH 04/06] sh: add isp1161 usb host device to se7343 [PATCH 05/06] sh: remove ioport cruft and smc91x from se7343 [PATCH 06/06] sh: update se7343 defconfig

This patchset simply updates the sh7343 processor code a bit and modifies the se7343 board support code to include the external usb host controller chip and on-board uarts. The out-of-date ioport code gets removed while at it - including some old support for unknown-ne2000-pcmcia-card, cf-over-pcmcia and a mysterical smc91x that once must have been on a special daughterboard.

Now with the USB host controller in place we get network connection using an ethernet-over-usb adapter (yay) but we're still unfortunately stuck loading the kernel over the serial gdbstub which makes kernel development too slow to be practical.

---

 arch/sh/boards/mach-se/7343/Makefile   |    2 
 arch/sh/boards/mach-se/7343/io.c       |  273 ----------------------------
 arch/sh/boards/mach-se/7343/setup.c    |  126 ++++++++-----
 arch/sh/configs/se7343_defconfig       |  303 ++++++++++++++++++++++++++++----
 arch/sh/include/mach-se/mach/se7343.h  |    9 
 arch/sh/kernel/cpu/sh4a/setup-sh7343.c |   19 +-
 6 files changed, 376 insertions(+), 356 deletions(-)
Applied
#1 lore raw
Quoted 16 lines · Magnus Damm

sh7343 and se7343 patches:

[PATCH 01/06] sh: sh7343 scif configuration update [PATCH 02/06] sh: fix number of interrupts on se7343 [PATCH 03/06] sh: add st16c2550 devices to se7343 [PATCH 04/06] sh: add isp1161 usb host device to se7343 [PATCH 05/06] sh: remove ioport cruft and smc91x from se7343 [PATCH 06/06] sh: update se7343 defconfig

This patchset simply updates the sh7343 processor code a bit and modifies the se7343 board support code to include the external usb host controller chip and on-board uarts. The out-of-date ioport code gets removed while at it - including some old support for unknown-ne2000-pcmcia-card, cf-over-pcmcia and a mysterical smc91x that once must have been on a special daughterboard.

Quoted 6 lines

Now with the USB host controller in place we get network connection using an ethernet-over-usb adapter (yay) but we're still unfortunately stuck loading the kernel over the serial gdbstub which makes kernel development too slow to be practical.

Applied, thanks.