legacy gpio phaseout (V) ...
cover legacy gpio phaseout (V) ...
Hi
With these two patches gpiolib conversion in mainline is almost complete when applied on top of Tony's Omap gpio update set for 2.6.29. Only board-apollon.c is remain in mainline but it is differentiated quite much from linux-omap so I'm going to send my next set against linux-omap only.
Note, these versions don't change mach/gpio.h include statement to linux/gpio.h due merge conflicts in mainline. SX1 seems to lack some gpio-swich related patch and omap2 onenand is getting some include fixes from mtd tree.
Signature · 1 line
Jarkko
PATCH 1/2 ARM: OMAP: SX1: Switch to gpio_request calls (OMAP and mainline)
--- arch/arm/mach-omap1/board-sx1.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
arch/arm/mach-omap1/board-sx1.c +3 -3
@@ -424,9 +424,9 @@ static void __init omap_sx1_init(void)/* turn on USB power */ /* sx1_setusbpower(1); cant do it here because i2c is not ready */ -omap_request_gpio (1 );/* A_IRDA_OFF */ -omap_request_gpio (11 );/* A_SWITCH */ -omap_request_gpio (15 );/* A_USB_ON */ +gpio_request (1 ,"A_IRDA_OFF" ); +gpio_request (11 ,"A_SWITCH" ); +gpio_request (15 ,"A_USB_ON" );gpio_direction_output (1 ,1 );/*A_IRDA_OFF = 1 */ gpio_direction_output (11 ,0 );/*A_SWITCH = 0 */ gpio_direction_output (15 ,0 );/*A_USB_ON = 0 */
Signature · 1 line
1.5.6.5
PATCH 2/2 OneNAND: OMAP2: Switch to gpio_request/free calls (OMAP and mainline)
In reply to Jarkko Nikula--- drivers/mtd/onenand/omap2.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
drivers/mtd/onenand/omap2.c +3 -3
@@ -630,7 +630,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) }if (c->gpio_irq) { -if ((r =omap_request_gpio (c->gpio_irq)) <0 ) { +if ((r =gpio_request (c->gpio_irq,"OneNAND irq" )) <0 ) {dev_err (&pdev->dev,"Failed to request GPIO%d for " "OneNAND\n" , c->gpio_irq); goto err_iounmap;
@@ -727,7 +727,7 @@ err_release_dma:free_irq (gpio_to_irq (c->gpio_irq), c); err_release_gpio:if (c->gpio_irq) -omap_free_gpio (c->gpio_irq); +gpio_free (c->gpio_irq); err_iounmap:iounmap (c->onenand.base); err_release_mem_region:
@@ -762,7 +762,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)platform_set_drvdata (pdev,NULL );if (c->gpio_irq) {free_irq (gpio_to_irq (c->gpio_irq), c); -omap_free_gpio (c->gpio_irq); +gpio_free (c->gpio_irq); }iounmap (c->onenand.base);release_mem_region (c->phys_base,ONENAND_IO_SIZE );
Signature · 1 line
1.5.6.5
Re: [PATCH 2/2] OneNAND: OMAP2: Switch to gpio_request/free calls (OMAP and mainline)
Quoted 5 lines · On Wed, 3 Dec 2008 09:37:24 +0200 Jarkko Nikula <[email protected]>…
Signed-off-by Jarkko Nikula <[email protected]>--- drivers/mtd/onenand/omap2.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
Grr, I forgot to add Adrian into cc list.
Quoted 34 lines
drivers/mtd/onenand/omap2.c +3
-3@@ -630,7 +630,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) }if (c->gpio_irq) { -if ((r =omap_request_gpio (c->gpio_irq)) <0 ) { +if ((r =gpio_request (c->gpio_irq,"OneNAND irq" )) <0 ) {dev_err (&pdev->dev,"Failed to request GPIO%d for " "OneNAND\n" , c->gpio_irq); goto err_iounmap;@@ -727,7 +727,7 @@ err_release_dma:free_irq (gpio_to_irq (c->gpio_irq), c); err_release_gpio:if (c->gpio_irq) -omap_free_gpio (c->gpio_irq); +gpio_free (c->gpio_irq); err_iounmap:iounmap (c->onenand.base); err_release_mem_region:@@ -762,7 +762,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)platform_set_drvdata (pdev,NULL );if (c->gpio_irq) {free_irq (gpio_to_irq (c->gpio_irq), c); -omap_free_gpio (c->gpio_irq); +gpio_free (c->gpio_irq); }iounmap (c->onenand.base);release_mem_region (c->phys_base,ONENAND_IO_SIZE );Signature · 1 line
1.5.6.5
PATCH 1/1 OneNAND: OMAP2: Switch to generic gpio calls
In reply to Jarkko NikulaFrom: Jarkko Nikula <[email protected]>
---drivers/mtd/onenand/omap2.c | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)
drivers/mtd/onenand/omap2.c +0 -0
@@ -149,7 +149,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
INIT_COMPLETION(c->irq_done);
if (c->gpio_irq) {
- result = omap_get_gpio_datain(c->gpio_irq);
+ result = gpio_get_value(c->gpio_irq);
if (result == -1) {
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
intr = read_reg(c, ONENAND_REG_INTERRUPT);
@@ -629,14 +629,14 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
}
if (c->gpio_irq) {
- if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+ if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
dev_err(&pdev->dev, "Failed to request GPIO%d for "
"OneNAND\n", c->gpio_irq);
goto err_iounmap;
}- omap_set_gpio_direction(c->gpio_irq, 1);
+ gpio_direction_input(c->gpio_irq);
- if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq),
+ if ((r = request_irq(gpio_to_irq(c->gpio_irq),
omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
pdev->dev.driver->name, c)) < 0)
goto err_release_gpio;
@@ -723,10 +723,10 @@ err_release_dma:
if (c->dma_channel != -1)
omap_free_dma(c->dma_channel);
if (c->gpio_irq)
- free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
+ free_irq(gpio_to_irq(c->gpio_irq), c);
err_release_gpio:
if (c->gpio_irq)
- omap_free_gpio(c->gpio_irq);
+ gpio_free(c->gpio_irq);
err_iounmap:
iounmap(c->onenand.base);
err_release_mem_region:
@@ -760,8 +760,8 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
omap2_onenand_shutdown(pdev);
platform_set_drvdata(pdev, NULL);
if (c->gpio_irq) {
- free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
- omap_free_gpio(c->gpio_irq);
+ free_irq(gpio_to_irq(c->gpio_irq), c);
+ gpio_free(c->gpio_irq);
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE);Signature · 1 line
1.5.4.3
Re: [PATCH] OneNAND: OMAP2: Switch to generic gpio calls
Quoted 2 lines · Adrian Hunter
- if ((r =
omap_request_gpio(c->gpio_irq)) < 0) { + if ((r =gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
Worth noting that this depends on the OMAP patches which make those calls be equivalent. Those patches are going into 2.6.29-early via the ARM tree, as I recall; getting the merge order wrong would break bisectability -- but not buildability.
- Dave
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Tony Lindgren
reviewerQuoted 11 lines · Jarkko Nikula
Hi
With these two patches gpiolib conversion in mainline is almost complete when applied on top of Tony's Omap gpio update set for 2.6.29. Only
board-apollon.cis remain in mainline but it is differentiated quite much from linux-omap so I'm going to send my next set against linux-omap only.Note, these versions don't change
mach/gpio.hinclude statement tolinux/gpio.hdue merge conflicts in mainline. SX1 seems to lack some gpio-swich related patch and omap2 onenand is getting some include fixes from mtd tree.
I've finally pushed these as one patch and also removed the remaining calls. Also on their way to mainline hopefully within next few days.
Regards,
Tony