LibATA error
Hello,
what does the following error mean? Does it mean that my shiny new SSD is buggy?
[ 461.382432] ata1.00: exception Emask 0x2 SAct 0x1 SErr 0x2000000 action 0x6
frozen
[ 461.382484] ata1.00: irq_stat 0x00000010, unknown FIS 00000000 00000000
00000000 00000000
[ 461.382534] ata1: SError: { UnrecFIS }
[ 461.382572] ata1.00: cmd 61/08:00:0f:82:de/00:00:00:00:00/40 tag 0 ncq 4096
out
[ 461.382574] res 40/00:00:0f:82:de/00:00:00:00:00/40 Emask 0x2 (HSM
violation)
[ 461.382666] ata1.00: status: { DRDY }
[ 461.382702] ata1: hard resetting link
[ 461.700087] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)Signature · 1 line
Lukáš Hejtmánek
Quoted 5 lines · Lukas Hejtmanek
Hello,
what does the following error mean? Does it mean that my shiny new SSD is buggy?
Quoted 13 lines
[ 461.382432] ata1.00: exception Emask 0x2 SAct 0x1 SErr 0x2000000 action 0x6
frozen
[ 461.382484] ata1.00: irq_stat 0x00000010, unknown FIS 00000000 00000000
00000000 00000000
[ 461.382534] ata1: SError: { UnrecFIS }
[ 461.382572] ata1.00: cmd 61/08:00:0f:82:de/00:00:00:00:00/40 tag 0 ncq 4096
out
[ 461.382574] res 40/00:00:0f:82:de/00:00:00:00:00/40 Emask 0x2 (HSM
violation)
[ 461.382666] ata1.00: status: { DRDY }
[ 461.382702] ata1: hard resetting link
[ 461.700087] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)It could be.. it means the drive sent the controller a SATA FIS (frame information structure) it didn't recognize.
Quoted 14 lines · Robert Hancock
Quoted 4 lines
[ 461.382432] ata1.00: exception Emask 0x2 SAct 0x1 SErr 0x2000000 action 0x6 frozen [ 461.382484] ata1.00: irq_stat 0x00000010, unknown FIS 00000000 0000000000000000 00000000
Quoted 9 lines
[ 461.382534] ata1: SError: { UnrecFIS } [ 461.382572] ata1.00: cmd 61/08:00:0f:82:de/00:00:00:00:00/40 tag 0 ncq 4096 out [ 461.382574] res 40/00:00:0f:82:de/00:00:00:00:00/40 Emask 0x2 (HSM violation) [ 461.382666] ata1.00: status: { DRDY } [ 461.382702] ata1: hard resetting link [ 461.700087] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Quoted 2 lines
It could be.. it means the drive sent the controller a SATA FIS (frame information structure) it didn't recognize.
hm, if I disable NCQ, I do not get these errors. Maybe OCZ SSD disks should be blacklisted for NCQ?
Signature · 1 line
Lukáš Hejtmánek
Quoted 5 lines
Quoted 2 lines
It could be.. it means the drive sent the controller a SATA FIS (frame information structure) it didn't recognize.
hm, if I disable NCQ, I do not get these errors. Maybe OCZ SSD disks should be blacklisted for NCQ?
They shouldn't be claiming they can do NCQ if so. Can you dump out the identify data in full (with hdparm) and if possible (or if someone else with one can comment..) find out whether the same occurs with different controller types.
Alan
Quoted 4 lines · Alan Cox
They shouldn't be claiming they can do NCQ if so. Can you dump out the identify data in full (with hdparm) and if possible (or if someone else with one can comment..) find out whether the same occurs with different controller types.
Controller reports NCQ queue depth 1.
Did you mean this one?
hdparm -i /dev/sda
/dev/sda:
Model=OCZ CORE_SSD , FwRev=02.10104,
SerialNo=DC030849085600010
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=63 BuffType=unknown, BuffSize=0kB, MaxMultSect=1, MultSect=?1? CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=504856576 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=no WriteCache=enabled
Drive conforms to: unknown: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
Signature · 1 line
Lukáš Hejtmánek