hwmon: Fix various typos
Subsystems (3)
PATCH 1/1 hwmon: Fix various typos
--- Documentation/hwmon/lm85 | 2 +- drivers/hwmon/it87.c | 2 +- drivers/hwmon/w83627ehf.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
drivers/hwmon/w83627ehf.c +1 -1
@@ -503,7 +503,7 @@ static struct w83627ehf_data *w83627ehf_ }for (i =0 ; i <4 ; i++) { -/* pwmcfg, tolarance mapped for i=0, i=1 to same reg */ +/* pwmcfg, tolerance mapped for i=0, i=1 to same reg */ if (i !=1 ) { pwmcfg =w83627ehf_read_value (data,W83627EHF_REG_PWM_ENABLE [i]);
Documentation/hwmon/lm85 +1 -1
@@ -164,7 +164,7 @@ configured individually according to the temperature. (PWM value from 0 to 255) * pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature - the bahaviour of fans. Write 1 to let fans spinning at + the behaviour of fans. Write 1 to let fans spinning at pwm#_auto_pwm_min or write 0 to let them off. NOTE: It has been reported that there is a bug in the LM85 that causes the flag
drivers/hwmon/it87.c +1 -1
@@ -1386,7 +1386,7 @@ static void __devinit it87_init_device(sit87_write_value (data,IT87_REG_TEMP_HIGH (i),127 ); } -/* Check if temperature channnels are reset manually or by some reason */ +/* Check if temperature channels are reset manually or by some reason */ tmp =it87_read_value (data,IT87_REG_TEMP_ENABLE );if ((tmp &0x3f ) =0 ) {/* Temp1,Temp3=thermistor; Temp2=thermal diode */
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 7 lines · Jean Delvare
Signed-off-by Jean Delvare <[email protected]>--- Documentation/hwmon/lm85 | 2 +- drivers/hwmon/it87.c | 2 +- drivers/hwmon/w83627ehf.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
Looks good to me :)
Regards,
Hans
Quoted 27 lines
drivers/hwmon/w83627ehf.c +1
-1@@ -503,7 +503,7 @@ static struct w83627ehf_data *w83627ehf_ }for (i =0 ; i <4 ; i++) { -/* pwmcfg, tolarance mapped for i=0, i=1 to same reg */ +/* pwmcfg, tolerance mapped for i=0, i=1 to same reg */ if (i !=1 ) { pwmcfg =w83627ehf_read_value (data,W83627EHF_REG_PWM_ENABLE [i]);Documentation/hwmon/lm85 +1
-1@@ -164,7 +164,7 @@ configured individually according to the temperature. (PWM value from 0 to 255) * pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature - the bahaviour of fans. Write 1 to let fans spinning at + the behaviour of fans. Write 1 to let fans spinning at pwm#_auto_pwm_min or write 0 to let them off. NOTE: It has been reported that there is a bug in the LM85 that causes the flag
drivers/hwmon/it87.c static void __devinit it87_init_device(s · line 1392
Quoted 8 lines
drivers/hwmon/it87.c +1
-1@@ -1386,7 +1386,7 @@ static void __devinit it87_init_device(sit87_write_value (data,IT87_REG_TEMP_HIGH (i),127 ); } -/* Check if temperature channnels are reset manually or by some reason */ +/* Check if temperature channels are reset manually or by some reason */ tmp =it87_read_value (data,IT87_REG_TEMP_ENABLE );if ((tmp &0x3f ) =0 ) {/* Temp1,Temp3=thermistor; Temp2=thermal diode */
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
ack both patches (ACPI resources and typo fixes)
P.S. I have found a bug in the way the init code in w83627ehf puts the base address into the data structure, so it ends up accessing the device at 0x290 when it should be 0x295. I'll send out a patch in a few days.
Quoted 9 lines · Hans de Goede
Quoted 7 lines · Jean Delvare
Signed-off-by Jean Delvare <[email protected]>--- Documentation/hwmon/lm85 | 2 +- drivers/hwmon/it87.c | 2 +- drivers/hwmon/w83627ehf.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
Quoted 5 lines
Looks good to me :)
Regards,
Hans
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Hi David,
Quoted 3 lines · David Hubbard
ack both patches (ACPI resources and typo fixes)
Signed-off-by David Hubbard <[email protected]>
Actually these are Acked-by, as the patch didn't transit through you. But thanks anyway :)
Quoted 4 lines
P.S. I have found a bug in the way the init code in w83627ehf puts the base address into the data structure, so it ends up accessing the device at0x290when it should be0x295. I'll send out a patch in a few days.
OK, I'll test and review it when you do.
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors