Kernel memory leak detector
Subsystems (10)
cover Kernel memory leak detector
A new kmemleak version is available. Thanks to all who reviewed the code and gave feedback. Kmemleak can also be found on this git tree:
git://linux-arm.org/linux-2.6.git kmemleak
Please note that even though I already got the ack from the slab/slob/slub maintainers, I haven't included the corresponding lines in the patch description because the patches were slightly modified to pass the GFP flags to the kmemleak callbacks. I would be grateful if you review these changes and re-acknowledge them.
Changes since the previous release:
- fatal errors for kmemleak are no longer fatal for the full system. Kmemleak can disable and clean-up after itself at run-time if such a condition occurs
- re-worked locking in the memleak.c file together with documentation on how it works
- kmemleak internal allocations use the GFP flags of the caller and are no longer restricted to GFP_ATOMIC
- better (hopefully) comments all over the code
- implemented most of the comments received so far (an important omission here is the tracking of alloc_bootmem calls since it looks a bit difficult to pair them with free_bootmem, the latter being used with reserve_bootmem or without a corresponding alloc_bootmem)
Still to do:
- run-time and boot-time configuration like task stacks scanning, disabling kmemleak, enabling/disabling the automatic scanning
Thanks for your comments.
Catalin Marinas (15):
kmemleak: Add the corresponding MAINTAINERS entry
kmemleak: Simple testing module for kmemleak
kmemleak: Keep the __init functions after initialization
kmemleak: Enable the building of the memory leak detector
kmemleak: Remove some of the kmemleak false positives
arm: Provide _sdata and __bss_stop in the vmlinux.lds.S file
x86: Provide _sdata in the vmlinux_*.lds.S files
kmemleak: Add modules support
kmemleak: Add memleak_alloc callback from alloc_large_system_hash
kmemleak: Add the vmalloc memory allocation/freeing hooks
kmemleak: Add the slub memory allocation/freeing hooks
kmemleak: Add the slob memory allocation/freeing hooks
kmemleak: Add the slab memory allocation/freeing hooks
kmemleak: Add documentation on the memory leak detector
kmemleak: Add the base support
Documentation/kmemleak.txt | 127 ++++ MAINTAINERS | 6 arch/arm/kernel/vmlinux.lds.S | 2 arch/x86/kernel/vmlinux_32.lds.S | 1 arch/x86/kernel/vmlinux_64.lds.S | 1 drivers/char/vt.c | 7 include/linux/init.h | 6 include/linux/memleak.h | 93 +++ include/linux/percpu.h | 5 include/linux/slab.h | 2 init/main.c | 4 kernel/module.c | 56 ++ lib/Kconfig.debug | 46 + mm/Makefile | 2 mm/memleak-test.c | 110 +++ mm/memleak.c | 1263 ++++++++++++++++++++++++++++++++++++++ mm/page_alloc.c | 3 mm/slab.c | 18 - mm/slob.c | 15 mm/slub.c | 5 mm/vmalloc.c | 29 + 21 files changed, 1790 insertions(+), 11 deletions(-) create mode 100644 Documentation/kmemleak.txt create mode 100644 include/linux/memleak.h create mode 100644 mm/memleak-test.c create mode 100644 mm/memleak.c
Signature · 1 line
Catalin
PATCH 1/15 kmemleak: Add the base support
This patch adds the base support for the kernel memory leak detector. It traces the memory allocation/freeing in a way similar to the Boehm's conservative garbage collector, the difference being that the unreferenced objects are not freed but only shown in /sys/kernel/debug/memleak. Enabling this feature introduces an overhead to memory allocations.
--- include/linux/memleak.h | 93 +++ init/main.c | 4 mm/memleak.c | 1263 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1359 insertions(+), 1 deletions(-) create mode 100644 include/linux/memleak.h create mode 100644 mm/memleak.c
include/linux/memleak.h new file +93 -0
@@ -0,0 +1,93 @@ +/* +* include/linux/memleak.h +* +* Copyright (C) 2008 ARM Limited +* Written by Catalin Marinas <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef __MEMLEAK_H +#define __MEMLEAK_H + +#ifdef CONFIG_DEBUG_MEMLEAK + +extern void memleak_init (void ); +extern void memleak_alloc (const void *ptr,size_t size,int min_count, +gfp_t gfp); +extern void memleak_free (const void *ptr); +extern void memleak_padding (const void *ptr,unsigned long offset,size_t size); +extern void memleak_not_leak (const void *ptr); +extern void memleak_ignore (const void *ptr); +extern void memleak_scan_area (const void *ptr,unsigned long offset, +size_t length,gfp_t gfp); + +static inline void memleak_alloc_recursive (const void *ptr,size_t size, +int min_count,unsigned long flags, +gfp_t gfp) +{ +if (!(flags &SLAB_NOLEAKTRACE )) +memleak_alloc (ptr, size, min_count, gfp); +} + +static inline void memleak_free_recursive (const void *ptr,unsigned long flags) +{ +if (!(flags &SLAB_NOLEAKTRACE )) +memleak_free (ptr); +} + +static inline void memleak_erase (void **ptr) +{ + *ptr =NULL ; +} + +#else + +#define DECLARE_MEMLEAK_OFFSET (name, type, member) + +static inline void memleak_init (void ) +{ +} +static inline void memleak_alloc (const void *ptr,size_t size,int min_count, +gfp_t gfp) +{ +} +static inline void memleak_alloc_recursive (const void *ptr,size_t size, +int min_count,unsigned long flags, +gfp_t gfp) +{ +} +static inline void memleak_free (const void *ptr) +{ +} +static inline void memleak_free_recursive (const void *ptr,unsigned long flags) +{ +} +static inline void memleak_not_leak (const void *ptr) +{ +} +static inline void memleak_ignore (const void *ptr) +{ +} +static inline void memleak_scan_area (const void *ptr,unsigned long offset, +size_t length,gfp_t gfp) +{ +} +static inline void memleak_erase (void **ptr) +{ +} + +#endif /* CONFIG_DEBUG_MEMLEAK */ + +#endif /* __MEMLEAK_H */
init/main.c +3 -1
@@ -56,6 +56,7 @@#include <linux/debug_locks.h> #include <linux/debugobjects.h> #include <linux/lockdep.h> +#include <linux/memleak.h> #include <linux/pid_namespace.h> #include <linux/device.h> #include <linux/kthread.h>
@@ -653,6 +654,8 @@ asmlinkage void __init start_kernel(void)enable_debug_pagealloc ();cpu_hotplug_init ();kmem_cache_init (); +prio_tree_init (); +memleak_init ();debug_objects_mem_init ();idr_init_cache ();setup_per_cpu_pageset ();
@@ -662,7 +665,6 @@ asmlinkage void __init start_kernel(void)calibrate_delay ();pidmap_init ();pgtable_cache_init (); -prio_tree_init ();anon_vma_init ();#ifdef CONFIG_X86 if (efi_enabled)
mm/memleak.c new file +1263 -0
1,263 lines not on this page · raw message
Re: [PATCH 01/15] kmemleak: Add the base support
Hi Catalin,
Few minor nits below.
mm/memleak.c line 398
Quoted 7 lines · Catalin Marinas
mm/memleak.c new file +7
-0+static void put_object (struct memleak_object *object) +{ +if (!atomic_dec_and_test (&object->use_count)) +return ; + +/* should only get here after delete_object was called */ +BUG_ON (object->flags &OBJECT_ALLOCATED );
This could be
if (WARN_ON(object->flags & OBJECT_ALLOCATED))
return;mm/memleak.c line 440
Quoted 12 lines
mm/memleak.c new file +12
-0+static void create_object (unsigned long ptr,size_t size,int min_count, +gfp_t gfp) +{ +unsigned long flags; +struct memleak_object *object; +struct prio_tree_node *node; +struct stack_trace trace; + + object =kmem_cache_alloc (object_cache, gfp); +if (!object) +memleak_panic ("kmemleak: Cannot allocate a memleak_object " +"structure\n" );
Don't you want to exit early here if object == NULL?
Quoted 42 lines
mm/memleak.c new file +42
-0+ +INIT_LIST_HEAD (&object->object_list); +INIT_LIST_HEAD (&object->gray_list); +INIT_HLIST_HEAD (&object->area_list); +spin_lock_init (&object->lock); +atomic_set (&object->use_count,1 ); + object->flags =OBJECT_ALLOCATED ; + object->pointer = ptr; + object->size = size; + object->min_count = min_count; + object->count =-1 ;/* no color initially */ + object->jiffies = jiffies; + +/* task information */ +if (in_irq ()) { + object->pid =0 ; +strncpy (object->comm,"hardirq" ,TASK_COMM_LEN ); + }else if (in_softirq ()) { + object->pid =0 ; +strncpy (object->comm,"softirq" ,TASK_COMM_LEN ); + }else { + object->pid = current->pid; +get_task_comm (object->comm, current); + } + +/* kernel backtrace */ + trace.max_entries =MAX_TRACE ; + trace.nr_entries =0 ; + trace.entries = object->trace; + trace.skip =1 ; +save_stack_trace (&trace); + object->trace_len = trace.nr_entries; + +INIT_PRIO_TREE_NODE (&object->tree_node); + object->tree_node.start = ptr; + object->tree_node.last = ptr + size -1 ; + +write_lock_irqsave (&memleak_lock, flags); + min_addr =min (min_addr, ptr); + max_addr =max (max_addr, ptr + size); + node =prio_tree_insert (&object_tree_root, &object->tree_node); +/*
mm/memleak.c line 492
Quoted 10 lines
mm/memleak.c new file +10
-0+* The code calling the kernel does not yet have the pointer to the +* memory block to be able to free it. However, we still hold the +* memleak_lock here in case parts of the kernel started freeing +* random memory blocks. +*/ +if (node != &object->tree_node) { +unsigned long flags; + +pr_warning ("kmemleak: Existing pointer\n" ); +dump_stack ();
How come you don't dump_stack() or even WARN_ON() unconditionally in kmemleak_panic() which is called bit later so you can remove this kind of ad hoc logging?
Quoted 20 lines
mm/memleak.c new file +18
-0+ + object =lookup_object (ptr,1 ); +spin_lock_irqsave (&object->lock, flags); +dump_object_info (object); +spin_unlock_irqrestore (&object->lock, flags); + +memleak_panic ("kmemleak: Cannot insert 0x%lx into the object " +"search tree\n" , ptr); + } +list_add_tail_rcu (&object->object_list, &object_list); +write_unlock_irqrestore (&memleak_lock, flags); +} + +/* +* Remove the metadata (struct memleak_object) for a memory block from the +* object_list and object_tree_root and decrement its use_count. +*/ +static void delete_object (unsigned long ptr)
mm/memleak.c line 520
Quoted 10 lines
mm/memleak.c new file +10
-0+{ +unsigned long flags; +struct memleak_object *object; + +write_lock_irqsave (&memleak_lock, flags); + object =lookup_object (ptr,0 ); +if (!object) { +pr_warning ("kmemleak: Freeing unknown object at 0x%08lx\n" , + ptr); +dump_stack ();
Hmm, dump_stack() is called in quite a few places. Might make sense to add a memleak_report() function that does this in an uniform way.
mm/memleak.c line 529
Quoted 9 lines
mm/memleak.c new file +9
-0+write_unlock_irqrestore (&memleak_lock, flags); +return ; + } +prio_tree_remove (&object_tree_root, &object->tree_node); +list_del_rcu (&object->object_list); +write_unlock_irqrestore (&memleak_lock, flags); + +BUG_ON (!(object->flags &OBJECT_ALLOCATED )); +BUG_ON (atomic_read (&object->use_count) <1 );
These could be converted to WARN_ON() calls, I think?
Quoted 22 lines
mm/memleak.c new file +22
-0+ +/* +* Locking here also ensures that the corresponding memory block +* cannot be freed when it is being scanned. +*/ +spin_lock_irqsave (&object->lock, flags); + object->flags &= ~OBJECT_ALLOCATED ; +#ifdef REPORT_ORPHAN_FREEING +if (color_white (object)) { +pr_warning ("kmemleak: Freeing orphan object 0x%08lx\n" , ptr); +dump_stack (); +dump_object_info (object); + } +#endif +spin_unlock_irqrestore (&object->lock, flags); +put_object (object); +} + +/* +* Make a object permanently as gray-colored so that it can no longer be +* reported as a leak. This is used in general to mark a false positive. +*/
mm/memleak.c line 561
Quoted 10 lines
mm/memleak.c new file +10
-0+static void make_gray_object (unsigned long ptr) +{ +unsigned long flags; +struct memleak_object *object; + + object =find_and_get_object (ptr,0 ); +if (!object) { +dump_stack (); +memleak_panic ("kmemleak: Graying unknown object at 0x%08lx\n" , + ptr);
Early return here?
Quoted 12 lines
mm/memleak.c new file +12
-0+ } + +spin_lock_irqsave (&object->lock, flags); + object->min_count =0 ; +spin_unlock_irqrestore (&object->lock, flags); +put_object (object); +} + +/* +* Mark the object as black-colored so that it is ignored from scans and +* reporting. +*/
mm/memleak.c line 583
Quoted 10 lines
mm/memleak.c new file +10
-0+static void make_black_object (unsigned long ptr) +{ +unsigned long flags; +struct memleak_object *object; + + object =find_and_get_object (ptr,0 ); +if (!object) { +dump_stack (); +memleak_panic ("kmemleak: Blacking unknown object at 0x%08lx\n" , + ptr);
Ditto.
Quoted 14 lines
mm/memleak.c new file +14
-0+ } + +spin_lock_irqsave (&object->lock, flags); + object->min_count =-1 ; +spin_unlock_irqrestore (&object->lock, flags); +put_object (object); +} + +/* +* Add a scanning area to the object. If at least one such area is added, +* kmemleak will only scan these ranges rather than the whole memory block. +*/ +static void add_scan_area (unsigned long ptr,unsigned long offset, +size_t length,gfp_t gfp)
mm/memleak.c line 607
Quoted 10 lines
mm/memleak.c new file +10
-0+{ +unsigned long flags; +struct memleak_object *object; +struct memleak_scan_area *area; + + object =find_and_get_object (ptr,0 ); +if (!object) { +dump_stack (); +memleak_panic ("kmemleak: Adding scan area to unknown " +"object at 0x%08lx\n" , ptr);
Ditto.
Quoted 26 lines
mm/memleak.c new file +26
-0+ } + + area =kmem_cache_alloc (scan_area_cache, gfp); +if (!area) +memleak_panic ("kmemleak: Cannot allocate a scan area\n" ); + +spin_lock_irqsave (&object->lock, flags); +if (offset + length > object->size) { +dump_stack (); +dump_object_info (object); +memleak_panic ("kmemleak: Scan area larger than object " +"0x%08lx\n" , ptr); + } + +INIT_HLIST_NODE (&area->node); + area->offset = offset; + area->length = length; + +hlist_add_head (&area->node, &object->area_list); +spin_unlock_irqrestore (&object->lock, flags); +put_object (object); +} + +/* +* Log an early memleak_* call to the early_log buffer. These calls will be +* processed later once kmemleak is fully initialized.
mm/memleak.c line 643
Quoted 10 lines
mm/memleak.c new file +10
-0+*/ +static void __init log_early (int op_type,const void *ptr,size_t size, +int min_count, +unsigned long offset,size_t length) +{ +unsigned long flags; +struct early_log *log; + +if (crt_early_log >=ARRAY_SIZE (early_log)) +memleak_panic ("kmemleak: Early log buffer exceeded\n" );
Here as well.
Quoted 16 lines
mm/memleak.c new file +16
-0+ +/* +* There is no need for locking since the kernel is still in UP mode +* at this stage. Disabling the IRQs is enough. +*/ +local_irq_save (flags); + log = &early_log[crt_early_log]; + log->op_type = op_type; + log->ptr = ptr; + log->size = size; + log->min_count = min_count; + log->offset = offset; + log->length = length; + crt_early_log++; +local_irq_restore (flags); +}
Re: [PATCH 01/15] kmemleak: Add the base support
Quoted 12 lines · Pekka Enberg
mm/memleak.c line 398
Quoted 7 lines · Catalin Marinas
mm/memleak.c new file +7
-0+static void put_object (struct memleak_object *object) +{ +if (!atomic_dec_and_test (&object->use_count)) +return ; + +/* should only get here after delete_object was called */ +BUG_ON (object->flags &OBJECT_ALLOCATED );This could be
Quoted 2 lines
if (WARN_ON(object->flags & OBJECT_ALLOCATED))
return;I'm not sure just warning would be enough. If this happens, its a severe bug in kmemleak and the tool is no longer useful (it could even leak memory or free already freed blocks). I could change it to a memleak_panic call but if the object use_count isn't reliable, the memleak_disable call wouldn't work properly either.
Quoted 6 lines
Quoted 6 lines
mm/memleak.c new file +6
-0+static void create_object (unsigned long ptr,size_t size,int min_count, +gfp_t gfp) +{ +unsigned long flags; +struct memleak_object *object; +struct prio_tree_node *node;
Quoted 8 lines
mm/memleak.c line 440
Quoted 6 lines
mm/memleak.c new file +6
-0+struct stack_trace trace; + + object =kmem_cache_alloc (object_cache, gfp); +if (!object) +memleak_panic ("kmemleak: Cannot allocate a memleak_object " +"structure\n" );Don't you want to exit early here if object == NULL?
Yes, indeed. That omission was caused by s/panic/memleak_panic/
Quoted 9 lines
mm/memleak.c line 492
Quoted 5 lines
mm/memleak.c new file +5
-0+if (node != &object->tree_node) { +unsigned long flags; + +pr_warning ("kmemleak: Existing pointer\n" ); +dump_stack ();How come you don't
dump_stack()or evenWARN_ON()unconditionally inkmemleak_panic()which is called bit later so you can remove this kind of ad hoc logging?
Yes, I'll unify these via the memleak_panic() macro.
Quoted 6 lines
Quoted 6 lines
mm/memleak.c new file +6
-0+static void delete_object (unsigned long ptr) +{ +unsigned long flags; +struct memleak_object *object; + +write_lock_irqsave (&memleak_lock, flags);
Quoted 8 lines
mm/memleak.c line 520
Quoted 5 lines
mm/memleak.c new file +5
-0+ object =lookup_object (ptr,0 ); +if (!object) { +pr_warning ("kmemleak: Freeing unknown object at 0x%08lx\n" , + ptr); +dump_stack ();Hmm,
dump_stack()is called in quite a few places. Might make sense to add amemleak_report()function that does this in an uniform way.
Yes.
Quoted 11 lines
mm/memleak.c line 529
Quoted 9 lines
mm/memleak.c new file +9
-0+write_unlock_irqrestore (&memleak_lock, flags); +return ; + } +prio_tree_remove (&object_tree_root, &object->tree_node); +list_del_rcu (&object->object_list); +write_unlock_irqrestore (&memleak_lock, flags); + +BUG_ON (!(object->flags &OBJECT_ALLOCATED )); +BUG_ON (atomic_read (&object->use_count) <1 );These could be converted to
WARN_ON()calls, I think?
See my comment above, these are genuine kmemleak bugs and it shouldn't just warn. Hopefully they will never happen unless a get/put_object is missing.
Thanks.
Signature · 1 line
Catalin
Re: [PATCH 01/15] kmemleak: Add the base support
Quoted 13 lines · Catalin Marinas
Quoted 12 lines · Pekka Enberg
mm/memleak.c line 398
Quoted 7 lines · Catalin Marinas
mm/memleak.c new file +7
-0+static void put_object (struct memleak_object *object) +{ +if (!atomic_dec_and_test (&object->use_count)) +return ; + +/* should only get here after delete_object was called */ +BUG_ON (object->flags &OBJECT_ALLOCATED );This could be
Quoted 8 lines
Quoted 2 lines
if (WARN_ON(object->flags & OBJECT_ALLOCATED)) return;I'm not sure just warning would be enough. If this happens, its a severe bug in kmemleak and the tool is no longer useful (it could even leak memory or free already freed blocks). I could change it to a
memleak_paniccall but if the objectuse_countisn't reliable, thememleak_disablecall wouldn't work properly either.
Oh, we use WARN_ON() for things like this as well to maximize the likelihood of the oops actually reaching the user. But whatever works for you the best.
Re: [PATCH 01/15] kmemleak: Add the base support
In reply to Catalin MarinasQuoted 6 lines · Catalin Marinas
This patch adds the base support for the kernel memory leak detector. It traces the memory allocation/freeing in a way similar to the Boehm's conservative garbage collector, the difference being that the unreferenced objects are not freed but only shown in
/sys/kernel/debug/memleak. Enabling this feature introduces an overhead to memory allocations.
Looks good to me from an RCU viewpoint!
Quoted 1,411 lines
Signed-off-by Catalin Marinas <[email protected]>Cc Ingo Molnar <[email protected]>Cc Pekka Enberg <[email protected]>Cc Andrew Morton <[email protected]>Cc Paul E. McKenney <[email protected]>--- include/linux/memleak.h | 93 +++ init/main.c | 4 mm/memleak.c | 1263 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1359 insertions(+), 1 deletions(-) create mode 100644 include/linux/memleak.h create mode 100644 mm/memleak.cinclude/linux/memleak.h new file +93
-0@@ -0,0 +1,93 @@ +/* +* include/linux/memleak.h +* +* Copyright (C) 2008 ARM Limited +* Written by Catalin Marinas <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef __MEMLEAK_H +#define __MEMLEAK_H + +#ifdef CONFIG_DEBUG_MEMLEAK + +extern void memleak_init (void ); +extern void memleak_alloc (const void *ptr,size_t size,int min_count, +gfp_t gfp); +extern void memleak_free (const void *ptr); +extern void memleak_padding (const void *ptr,unsigned long offset,size_t size); +extern void memleak_not_leak (const void *ptr); +extern void memleak_ignore (const void *ptr); +extern void memleak_scan_area (const void *ptr,unsigned long offset, +size_t length,gfp_t gfp); + +static inline void memleak_alloc_recursive (const void *ptr,size_t size, +int min_count,unsigned long flags, +gfp_t gfp) +{ +if (!(flags &SLAB_NOLEAKTRACE )) +memleak_alloc (ptr, size, min_count, gfp); +} + +static inline void memleak_free_recursive (const void *ptr,unsigned long flags) +{ +if (!(flags &SLAB_NOLEAKTRACE )) +memleak_free (ptr); +} + +static inline void memleak_erase (void **ptr) +{ + *ptr =NULL ; +} + +#else + +#define DECLARE_MEMLEAK_OFFSET (name, type, member) + +static inline void memleak_init (void ) +{ +} +static inline void memleak_alloc (const void *ptr,size_t size,int min_count, +gfp_t gfp) +{ +} +static inline void memleak_alloc_recursive (const void *ptr,size_t size, +int min_count,unsigned long flags, +gfp_t gfp) +{ +} +static inline void memleak_free (const void *ptr) +{ +} +static inline void memleak_free_recursive (const void *ptr,unsigned long flags) +{ +} +static inline void memleak_not_leak (const void *ptr) +{ +} +static inline void memleak_ignore (const void *ptr) +{ +} +static inline void memleak_scan_area (const void *ptr,unsigned long offset, +size_t length,gfp_t gfp) +{ +} +static inline void memleak_erase (void **ptr) +{ +} + +#endif /* CONFIG_DEBUG_MEMLEAK */ + +#endif /* __MEMLEAK_H */ init/main.c +3
-1@@ -56,6 +56,7 @@#include <linux/debug_locks.h> #include <linux/debugobjects.h> #include <linux/lockdep.h> +#include <linux/memleak.h> #include <linux/pid_namespace.h> #include <linux/device.h> #include <linux/kthread.h> @@ -653,6 +654,8 @@ asmlinkage void __init start_kernel(void)enable_debug_pagealloc ();cpu_hotplug_init ();kmem_cache_init (); +prio_tree_init (); +memleak_init ();debug_objects_mem_init ();idr_init_cache ();setup_per_cpu_pageset ();@@ -662,7 +665,6 @@ asmlinkage void __init start_kernel(void)calibrate_delay ();pidmap_init ();pgtable_cache_init (); -prio_tree_init ();anon_vma_init ();#ifdef CONFIG_X86 if (efi_enabled)mm/memleak.c new file +1263
-0@@ -0,0 +1,1263 @@ +/* +* mm/memleak.c +* +* Copyright (C) 2008 ARM Limited +* Written by Catalin Marinas <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +* +* +* For more information on the algorithm and kmemleak usage, please see +* Documentation/kmemleak.txt. +* +* Notes on locking +* ---------------- +* +* The following locks are used by kmemleak: +* +* - memleak_lock (rw_lock): protects the object_list modifications and +* accesses to the object_tree_root. The object_list is the main +* list holding the metadata (struct memleak_object) for the allocated +* memory blocks. The object_tree_root is a priority search tree used to +* look-up metadata based on a pointer to the corresponding memory block. +* The memleak_object structures are added to the object_list and +* object_tree_root in the create_object() function called from the +* memleak_alloc() callback and removed in delete_object() called from the +* memleak_free() callback +* - memleak_object.lock (spinlock): protects a memleak_object. Accesses to +* the metadata (e.g. count) are protected by this lock. Note that some +* members of this structure may be protected by other means (atomic or +* memleak_lock). This lock is also held when scanning the corresponding +* memory block to avoid the kernel freeing it via the memleak_free() +* callback. This is less heavyweight than holding a global lock like +* memleak_lock during scanning +* +* The memleak_object structures have a use_count incremented or decremented +* using the get_object()/put_object() functions. When the use_count becomes +* 0, this count can no longer be incremented and put_object() schedules the +* memleak_object freeing via an RCU callback. All calls to the get_object() +* function must be protected by rcu_read_lock() to avoid accessing a freed +* structure. +* +* The only mutex used is scan_mutex. This ensures that only one thread may +* scan the memory for unreferenced objects at a time. The gray_list contains +* the objects which are already referenced or marked as false positives and +* need to be scanned. This list is only modified during a scanning episode +* when the scan_mutex is held. At the end of a scan, the gray_list is always +* empty. Note that the memleak_object.use_count is incremented when an object +* is added to the gray_list and therefore cannot be freed. +*/ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/sched.h> +#include <linux/jiffies.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/kthread.h> +#include <linux/prio_tree.h> +#include <linux/gfp.h> +#include <linux/kallsyms.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/cpumask.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/rcupdate.h> +#include <linux/stacktrace.h> +#include <linux/cache.h> +#include <linux/percpu.h> +#include <linux/hardirq.h> +#include <linux/mmzone.h> +#include <linux/slab.h> +#include <linux/thread_info.h> + +#include <asm/sections.h> +#include <asm/processor.h> +#include <asm/atomic.h> + +#include <linux/memleak.h> + +/* +* Kmemleak configuration and common defines. +*/ +#define MAX_TRACE 16/* stack trace length */ +#define REPORTS_NR 100/* maximum number of reported leaks */ +#define MSECS_MIN_AGE 5000/* minimum object age for reporting */ +#define MSECS_SCAN_YIELD 10/* CPU yielding period */ +#define SECS_FIRST_SCAN 60/* delay before the first scan */ +#define SECS_SCAN_PERIOD 600/* auto scanning period */ +#undef SCAN_TASK_STACKS/* scan the task kernel stacks */ +#undef REPORT_ORPHAN_FREEING/* notify when freeing orphan objects */ + +#define BYTES_PER_POINTER sizeof(void *) + +/* scanning area inside a memory block */ +struct memleak_scan_area { +struct hlist_node node; +unsigned long offset; +size_t length; +}; + +/* +* Structure holding the metadata for each allocated memory block. +* Modifications to such objects should be made while holding the +* object->lock. Insertions or deletions from object_list, gray_list or +* tree_node are already protected by the corresponding locks or mutex (see +* the notes on locking above). These objects are reference-counted +* (use_count) and freed using the RCU mechanism. +*/ +struct memleak_object { +spinlock_t lock; +unsigned long flags;/* object status flags */ +struct list_head object_list; +struct list_head gray_list; +struct prio_tree_node tree_node; +struct rcu_head rcu;/* object_list lockless traversal */ +/* object usage count; object freed when use_count == 0 */ +atomic_t use_count; +unsigned long pointer; +size_t size; +/* minimum number of a pointers found before it is considered leak */ +int min_count; +/* the total number of pointers found pointing to this object */ +int count; +/* memory ranges to be scanned inside an object (empty for all) */ +struct hlist_head area_list; +unsigned long trace[MAX_TRACE ]; +unsigned int trace_len; +unsigned long jiffies;/* creation timestamp */ +pid_t pid;/* pid of the current task */ +char comm[TASK_COMM_LEN ];/* executable name */ +}; + +/* flag representing the memory block allocation status */ +#define OBJECT_ALLOCATED (1 << 0) +/* flag set after the first reporting of an unreference object */ +#define OBJECT_REPORTED (1 << 1) + +/* the list of all allocated objects */ +static LIST_HEAD (object_list); +/* the list of gray-colored objects (see color_gray comment below) */ +static LIST_HEAD (gray_list); +/* prio search tree for object boundaries */ +static struct prio_tree_root object_tree_root; +/* rw_lock protecting the access to object_list and prio_tree_root */ +static DEFINE_RWLOCK (memleak_lock); + +/* allocation caches for kmemleak internal data */ +static struct kmem_cache *object_cache; +static struct kmem_cache *scan_area_cache; + +/* set if tracing memory operations is enabled */ +static atomic_t memleak_enabled =ATOMIC_INIT (0 ); +/* set in the late_initcall if there were no errors */ +static atomic_t memleak_initialized =ATOMIC_INIT (0 ); +/* enables or disables early logging of the memory operations */ +static atomic_t memleak_early_log =ATOMIC_INIT (1 ); +/* set if a fata kmemleak error has occurred */ +static atomic_t memleak_error =ATOMIC_INIT (0 ); + +/* minimum and maximum address that may be valid pointers */ +static unsigned long min_addr =ULONG_MAX ; +static unsigned long max_addr; + +/* used for yielding the CPU to other tasks during scanning */ +static unsigned long next_scan_yield; +static struct task_struct *scan_thread; +static unsigned long jiffies_scan_yield; +static unsigned long jiffies_min_age; +static DEFINE_MUTEX (scan_mutex); + +/* number of leaks reported (for limitation purposes) */ +static int reported_leaks; + +/* +* Early object allocation/freeing logging. Kmemleak is initialized after the +* kernel allocator. However, both the kernel allocator and kmemleak may +* allocate memory blocks which need to be tracked. Kmemleak defines an +* arbitrary buffer to hold the allocation/freeing information before it is +* fully initialized. +*/ + +/* kmemleak operation type for early logging */ +enum { +MEMLEAK_ALLOC , +MEMLEAK_FREE , +MEMLEAK_NOT_LEAK , +MEMLEAK_IGNORE , +MEMLEAK_SCAN_AREA , +}; + +/* +* Structure holding the information passed to kmemleak callbacks during the +* early logging. +*/ +struct early_log { +int op_type;/* kmemleak operation type */ +const void *ptr;/* allocated/freed memory block */ +size_t size;/* memory block size */ +int min_count;/* minimum reference count */ +unsigned long offset;/* scan area offset */ +size_t length;/* scan area length */ +}; + +/* early logging buffer and current position */ +static struct early_log __initdata early_log[200 ]; +static int __initdata crt_early_log; + +static void memleak_disable (void ); + +/* +* Macro invoked when a serious kmemleak condition occured and cannot be +* recovered from. Kmemleak will be disabled and further allocation/freeing +* tracing no longer available. +*/ +#define memleak_panic(x...) { \ + pr_warning(x); \ + memleak_disable(); \ +} + +/* +* Object colors, encoded with count and min_count: +* - white - orphan object, not enough references to it (count < min_count) +* - gray - not orphan, marked as false positive (min_count == 0) or +* sufficient references to it (count >= min_count) +* - black - ignore, it doesn't contain references (e.g. text section) +* (min_count == -1). No function defined for this color. +* Newly created objects don't have any color assigned (object->count == -1) +* before the next memory scan when they become white. +*/ +static int color_white (const struct memleak_object *object) +{ +return object->count !=-1 && object->count < object->min_count; +} + +static int color_gray (const struct memleak_object *object) +{ +return object->min_count !=-1 && object->count >= object->min_count; +} + +/* +* Objects are considered unreferenced only if their color is white, they have +* not be deleted and have a minimum age to avoid false positives caused by +* pointers temporarily stored in CPU registers. +*/ +static int unreferenced_object (struct memleak_object *object) +{ +if (color_white (object) && + (object->flags &OBJECT_ALLOCATED ) && +time_is_before_eq_jiffies (object->jiffies + jiffies_min_age)) +return 1 ; +else +return 0 ; +} + +/* +* Printing of the unreferenced objects information, either to the seq file +* or to the kernel log. The print_unreferenced() function must be called with +* the object->lock held. +*/ +#define print_helper(seq, x...) \ +do { \ + if (seq) \ + seq_printf(seq, x); \ + else \ + pr_info(x); \ +} while (0) + +static void print_unreferenced (struct seq_file *seq, +struct memleak_object *object) +{ +char namebuf[KSYM_NAME_LEN +1 ] ="" ; +char *modname; +unsigned long symsize; +int i; + +print_helper (seq,"unreferenced object 0x%08lx (size %zu):\n" , + object->pointer, object->size); +print_helper (seq," comm \"%s\", pid %d, jiffies %lu\n" , + object->comm, object->pid, object->jiffies); +print_helper (seq," backtrace:\n" ); + +for (i =0 ; i < object->trace_len; i++) { +unsigned long trace = object->trace[i]; +unsigned long offset =0 ; + +kallsyms_lookup (trace, &symsize, &offset, &modname, namebuf); +print_helper (seq," [<%08lx>] %s\n" , trace, namebuf); + } +} + +/* +* Print the memleak_object information. This function is used mainly for +* debugging special cases when kmemleak operations. It must be called with +* the object->lock held. +*/ +static void dump_object_info (struct memleak_object *object) +{ +struct stack_trace trace; + + trace.nr_entries = object->trace_len; + trace.entries = object->trace; + +pr_notice ("kmemleak: Object 0x%08lx (size %zu):\n" , + object->tree_node.start, object->size); +pr_notice (" comm \"%s\", pid %d, jiffies %lu\n" , + object->comm, object->pid, object->jiffies); +pr_notice (" min_count = %d\n" , object->min_count); +pr_notice (" count = %d\n" , object->count); +pr_notice (" backtrace:\n" ); +print_stack_trace (&trace,4 ); +} + +/* +* Look-up a memory block metadata (memleak_object) in the priority search +* tree based on a pointer value. If alias is 0, only values pointing to the +* beginning of the memory block are allowed. The memleak_lock must be held +* when calling this function. +*/ +static struct memleak_object *lookup_object (unsigned long ptr,int alias) +{ +struct prio_tree_node *node; +struct prio_tree_iter iter; +struct memleak_object *object; + +prio_tree_iter_init (&iter, &object_tree_root, ptr, ptr); + node =prio_tree_next (&iter); +if (node) { + object = prio_tree_entry(node, struct memleak_object, + tree_node); +if (!alias && object->pointer != ptr) { +pr_warning ("kmemleak: Found object by alias" ); + object =NULL ; + } + }else + object =NULL ; + +return object; +} + +/* +* Increment the object use_count. Return 1 if successful or 0 otherwise. Note +* that once an object's use_count reached 0, the RCU freeing was already +* registered and the object should no longer be used. This function must be +* called under the protection of rcu_read_lock(). +*/ +static int get_object (struct memleak_object *object) +{ +return atomic_inc_not_zero (&object->use_count); +} + +/* +* RCU callback to free a memleak_object. +*/ +static void free_object_rcu (struct rcu_head *rcu) +{ +struct hlist_node *elem, *tmp; +struct memleak_scan_area *area; +struct memleak_object *object = + container_of(rcu, struct memleak_object, rcu); + +/* +* Once use_count is 0 (guaranteed by put_object), there is no other +* code accessing this object, hence no need for locking. +*/ +hlist_for_each_entry_safe (area, elem, tmp, &object->area_list, node) { +hlist_del (elem); +kmem_cache_free (scan_area_cache, area); + } +kmem_cache_free (object_cache, object); +} + +/* +* Decrement the object use_count. Once the count is 0, free the object using +* an RCU callback. Since put_object() may be called via the memleak_free() -> +* delete_object() path, the delayed RCU freeing ensures that there is no +* recursive call to the kernel allocator. Lock-less RCU object_list traversal +* is also possible. +*/ +static void put_object (struct memleak_object *object) +{ +if (!atomic_dec_and_test (&object->use_count)) +return ; + +/* should only get here after delete_object was called */ +BUG_ON (object->flags &OBJECT_ALLOCATED ); + +call_rcu (&object->rcu, free_object_rcu); +} + +/* +* Look up an object in the prio search tree and increase its use_count. +*/ +static struct memleak_object *find_and_get_object (unsigned long ptr,int alias) +{ +unsigned long flags; +struct memleak_object *object =NULL ; + +rcu_read_lock (); +read_lock_irqsave (&memleak_lock, flags); +if (ptr >= min_addr && ptr < max_addr) + object =lookup_object (ptr, alias); +read_unlock_irqrestore (&memleak_lock, flags); + +/* check whether the object is still available */ +if (object && !get_object (object)) + object =NULL ; +rcu_read_unlock (); + +return object; +} + +/* +* Create the metadata (struct memleak_object) corresponding to an allocated +* memory block and add it to the object_list and object_tree_root. +*/ +static void create_object (unsigned long ptr,size_t size,int min_count, +gfp_t gfp) +{ +unsigned long flags; +struct memleak_object *object; +struct prio_tree_node *node; +struct stack_trace trace; + + object =kmem_cache_alloc (object_cache, gfp); +if (!object) +memleak_panic ("kmemleak: Cannot allocate a memleak_object " +"structure\n" ); + +INIT_LIST_HEAD (&object->object_list); +INIT_LIST_HEAD (&object->gray_list); +INIT_HLIST_HEAD (&object->area_list); +spin_lock_init (&object->lock); +atomic_set (&object->use_count,1 ); + object->flags =OBJECT_ALLOCATED ; + object->pointer = ptr; + object->size = size; + object->min_count = min_count; + object->count =-1 ;/* no color initially */ + object->jiffies = jiffies; + +/* task information */ +if (in_irq ()) { + object->pid =0 ; +strncpy (object->comm,"hardirq" ,TASK_COMM_LEN ); + }else if (in_softirq ()) { + object->pid =0 ; +strncpy (object->comm,"softirq" ,TASK_COMM_LEN ); + }else { + object->pid = current->pid; +get_task_comm (object->comm, current); + } + +/* kernel backtrace */ + trace.max_entries =MAX_TRACE ; + trace.nr_entries =0 ; + trace.entries = object->trace; + trace.skip =1 ; +save_stack_trace (&trace); + object->trace_len = trace.nr_entries; + +INIT_PRIO_TREE_NODE (&object->tree_node); + object->tree_node.start = ptr; + object->tree_node.last = ptr + size -1 ; + +write_lock_irqsave (&memleak_lock, flags); + min_addr =min (min_addr, ptr); + max_addr =max (max_addr, ptr + size); + node =prio_tree_insert (&object_tree_root, &object->tree_node); +/* +* The code calling the kernel does not yet have the pointer to the +* memory block to be able to free it. However, we still hold the +* memleak_lock here in case parts of the kernel started freeing +* random memory blocks. +*/ +if (node != &object->tree_node) { +unsigned long flags; + +pr_warning ("kmemleak: Existing pointer\n" ); +dump_stack (); + + object =lookup_object (ptr,1 ); +spin_lock_irqsave (&object->lock, flags); +dump_object_info (object); +spin_unlock_irqrestore (&object->lock, flags); + +memleak_panic ("kmemleak: Cannot insert 0x%lx into the object " +"search tree\n" , ptr); + } +list_add_tail_rcu (&object->object_list, &object_list); +write_unlock_irqrestore (&memleak_lock, flags); +} + +/* +* Remove the metadata (struct memleak_object) for a memory block from the +* object_list and object_tree_root and decrement its use_count. +*/ +static void delete_object (unsigned long ptr) +{ +unsigned long flags; +struct memleak_object *object; + +write_lock_irqsave (&memleak_lock, flags); + object =lookup_object (ptr,0 ); +if (!object) { +pr_warning ("kmemleak: Freeing unknown object at 0x%08lx\n" , + ptr); +dump_stack (); +write_unlock_irqrestore (&memleak_lock, flags); +return ; + } +prio_tree_remove (&object_tree_root, &object->tree_node); +list_del_rcu (&object->object_list); +write_unlock_irqrestore (&memleak_lock, flags); + +BUG_ON (!(object->flags &OBJECT_ALLOCATED )); +BUG_ON (atomic_read (&object->use_count) <1 ); + +/* +* Locking here also ensures that the corresponding memory block +* cannot be freed when it is being scanned. +*/ +spin_lock_irqsave (&object->lock, flags); + object->flags &= ~OBJECT_ALLOCATED ; +#ifdef REPORT_ORPHAN_FREEING +if (color_white (object)) { +pr_warning ("kmemleak: Freeing orphan object 0x%08lx\n" , ptr); +dump_stack (); +dump_object_info (object); + } +#endif +spin_unlock_irqrestore (&object->lock, flags); +put_object (object); +} + +/* +* Make a object permanently as gray-colored so that it can no longer be +* reported as a leak. This is used in general to mark a false positive. +*/ +static void make_gray_object (unsigned long ptr) +{ +unsigned long flags; +struct memleak_object *object; + + object =find_and_get_object (ptr,0 ); +if (!object) { +dump_stack (); +memleak_panic ("kmemleak: Graying unknown object at 0x%08lx\n" , + ptr); + } + +spin_lock_irqsave (&object->lock, flags); + object->min_count =0 ; +spin_unlock_irqrestore (&object->lock, flags); +put_object (object); +} + +/* +* Mark the object as black-colored so that it is ignored from scans and +* reporting. +*/ +static void make_black_object (unsigned long ptr) +{ +unsigned long flags; +struct memleak_object *object; + + object =find_and_get_object (ptr,0 ); +if (!object) { +dump_stack (); +memleak_panic ("kmemleak: Blacking unknown object at 0x%08lx\n" , + ptr); + } + +spin_lock_irqsave (&object->lock, flags); + object->min_count =-1 ; +spin_unlock_irqrestore (&object->lock, flags); +put_object (object); +} + +/* +* Add a scanning area to the object. If at least one such area is added, +* kmemleak will only scan these ranges rather than the whole memory block. +*/ +static void add_scan_area (unsigned long ptr,unsigned long offset, +size_t length,gfp_t gfp) +{ +unsigned long flags; +struct memleak_object *object; +struct memleak_scan_area *area; + + object =find_and_get_object (ptr,0 ); +if (!object) { +dump_stack (); +memleak_panic ("kmemleak: Adding scan area to unknown " +"object at 0x%08lx\n" , ptr); + } + + area =kmem_cache_alloc (scan_area_cache, gfp); +if (!area) +memleak_panic ("kmemleak: Cannot allocate a scan area\n" ); + +spin_lock_irqsave (&object->lock, flags); +if (offset + length > object->size) { +dump_stack (); +dump_object_info (object); +memleak_panic ("kmemleak: Scan area larger than object " +"0x%08lx\n" , ptr); + } + +INIT_HLIST_NODE (&area->node); + area->offset = offset; + area->length = length; + +hlist_add_head (&area->node, &object->area_list); +spin_unlock_irqrestore (&object->lock, flags); +put_object (object); +} + +/* +* Log an early memleak_* call to the early_log buffer. These calls will be +* processed later once kmemleak is fully initialized. +*/ +static void __init log_early (int op_type,const void *ptr,size_t size, +int min_count, +unsigned long offset,size_t length) +{ +unsigned long flags; +struct early_log *log; + +if (crt_early_log >=ARRAY_SIZE (early_log)) +memleak_panic ("kmemleak: Early log buffer exceeded\n" ); + +/* +* There is no need for locking since the kernel is still in UP mode +* at this stage. Disabling the IRQs is enough. +*/ +local_irq_save (flags); + log = &early_log[crt_early_log]; + log->op_type = op_type; + log->ptr = ptr; + log->size = size; + log->min_count = min_count; + log->offset = offset; + log->length = length; + crt_early_log++; +local_irq_restore (flags); +} + +/* +* Memory allocation function callback. This function is called from the +* kernel allocators when a new block is allocated (kmem_cache_alloc, kmalloc, +* vmalloc etc.). +*/ +void memleak_alloc (const void *ptr,size_t size,int min_count,gfp_t gfp) +{ +pr_debug ("%s(0x%p, %zu, %d)\n" , __func__, ptr, size, min_count); + +if (atomic_read (&memleak_enabled) && ptr) +create_object ((unsigned long )ptr, size, min_count, gfp); +else if (atomic_read (&memleak_early_log)) +log_early (MEMLEAK_ALLOC , ptr, size, min_count,0 ,0 ); +} +EXPORT_SYMBOL_GPL (memleak_alloc); + +/* +* Memory freeing function callback. This function is called from the kernel +* allocators when a block is freed (kmem_cache_free, kfree, vfree etc.). +*/ +void memleak_free (const void *ptr) +{ +pr_debug ("%s(0x%p)\n" , __func__, ptr); + +if (atomic_read (&memleak_enabled) && ptr) +delete_object ((unsigned long )ptr); +else if (atomic_read (&memleak_early_log)) +log_early (MEMLEAK_FREE , ptr,0 ,0 ,0 ,0 ); +} +EXPORT_SYMBOL_GPL (memleak_free); + +/* +* Mark an already allocated memory block as a false positive. This will cause +* the block to no longer be reported as leak and always be scanned. +*/ +void memleak_not_leak (const void *ptr) +{ +pr_debug ("%s(0x%p)\n" , __func__, ptr); + +if (atomic_read (&memleak_enabled) && ptr) +make_gray_object ((unsigned long )ptr); +else if (atomic_read (&memleak_early_log)) +log_early (MEMLEAK_NOT_LEAK , ptr,0 ,0 ,0 ,0 ); +} +EXPORT_SYMBOL (memleak_not_leak); + +/* +* Ignore a memory block. This is usually done when it is known that the +* corresponding block is not a leak and does not contain any references to +* other allocated memory blocks. +*/ +void memleak_ignore (const void *ptr) +{ +pr_debug ("%s(0x%p)\n" , __func__, ptr); + +if (atomic_read (&memleak_enabled) && ptr) +make_black_object ((unsigned long )ptr); +else if (atomic_read (&memleak_early_log)) +log_early (MEMLEAK_IGNORE , ptr,0 ,0 ,0 ,0 ); +} +EXPORT_SYMBOL (memleak_ignore); + +/* +* Limit the range to be scanned in an allocated memory block. +*/ +void memleak_scan_area (const void *ptr,unsigned long offset,size_t length, +gfp_t gfp) +{ +pr_debug ("%s(0x%p)\n" , __func__, ptr); + +if (atomic_read (&memleak_enabled) && ptr) +add_scan_area ((unsigned long )ptr, offset, length, gfp); +else if (atomic_read (&memleak_early_log)) +log_early (MEMLEAK_SCAN_AREA , ptr,0 ,0 , offset, length); +} +EXPORT_SYMBOL (memleak_scan_area); + +/* +* Yield the CPU so that other tasks get a chance to run. The yielding is +* rate-limited to avoid excessive number of calls to the schedule() function +* during memory scanning. +*/ +static void scan_yield (void ) +{ +might_sleep (); + +if (time_is_before_eq_jiffies (next_scan_yield)) { +schedule (); + next_scan_yield = jiffies + jiffies_scan_yield; + } +} + +/* +* Memory scanning is a long process and it needs to be interruptable. This +* function checks whether such interrupt condition occured. +*/ +static int scan_should_stop (void ) +{ +if (!atomic_read (&memleak_enabled)) +return 1 ; +/* +* This function may be called from either process or kthread context, +* hence the need to check for both stop conditions. +*/ +if ((current->mm &&signal_pending (current)) || + (!current->mm &&kthread_should_stop ())) +return 1 ; +return 0 ; +} + +/* +* Scan a memory block (exclusive range) for valid pointers and add those +* found to the gray list. +*/ +static void scan_block (void *_start,void *_end,struct memleak_object *scanned) +{ +unsigned long *ptr; +unsigned long *start =PTR_ALIGN (_start,BYTES_PER_POINTER ); +unsigned long *end = _end - (BYTES_PER_POINTER -1 ); + +for (ptr = start; ptr < end; ptr++) { +unsigned long flags; +unsigned long pointer = *ptr; +struct memleak_object *object; + +if (scan_should_stop ()) +break ; + +/* +* When scanning a memory block with a corresponding +* memleak_object, the CPU yielding is handled in the calling +* code since it holds the object->lock to avoid the block +* freeing. +*/ +if (!scanned) +scan_yield (); + + object =find_and_get_object (pointer,1 ); +if (!object) +continue ; +if (object == scanned) { +/* self referenced, ignore */ +put_object (object); +continue ; + } + +/* +* Avoid the lockdep recursive warning on object->lock being +* previously acquired in scan_object(). These locks are +* enclosed by scan_mutex. +*/ +spin_lock_irqsave_nested (&object->lock, flags, +SINGLE_DEPTH_NESTING ); +if (!color_white (object)) { +/* non-orphan, ignored or new */ +spin_unlock_irqrestore (&object->lock, flags); +put_object (object); +continue ; + } + +/* +* Increase the object's reference count (number of pointers +* to the memory block). If this count reaches the required +* minimum, the object's color will become gray and it will be +* added to the gray_list. +*/ + object->count++; +if (color_gray (object)) +list_add_tail (&object->gray_list, &gray_list); +else +put_object (object); +spin_unlock_irqrestore (&object->lock, flags); + } +} + +/* +* Scan a memory block corresponding to a memleak_object. A condition is +* that object->use_count >= 1. +*/ +static void scan_object (struct memleak_object *object) +{ +struct memleak_scan_area *area; +struct hlist_node *elem; +unsigned long flags; + +/* +* Once the object->lock is aquired, the corresponding memory block +* cannot be freed (the same lock is aquired in delete_object). +*/ +spin_lock_irqsave (&object->lock, flags); +if (!(object->flags &OBJECT_ALLOCATED )) +/* already freed object */ + goto out; +if (hlist_empty (&object->area_list)) +scan_block ((void *)object->pointer, + (void *)(object->pointer + object->size), object); +else +hlist_for_each_entry (area, elem, &object->area_list, node) +scan_block ((void *)(object->pointer + area->offset), + (void *)(object->pointer + area->offset + + area->length), object); + out: +spin_unlock_irqrestore (&object->lock, flags); +} + +/* +* Scan data sections and all the referenced memory blocks allocated via the +* kernel's standard allocators. This function must be called with the +* scan_mutex held. +*/ +static void memleak_scan (void ) +{ +unsigned long flags; +struct memleak_object *object, *tmp; +#ifdef CONFIG_SMP +int i; +#endif +#ifdef SCAN_TASK_STACKS +struct task_struct *task; +#endif + +/* prepare the memleak_object's */ +rcu_read_lock (); +list_for_each_entry_rcu (object, &object_list, object_list) { +spin_lock_irqsave (&object->lock, flags); +#ifdef DEBUG +/* +* With a few exceptions there should be a maximum of +* 1 reference to any object at this point. +*/ +if (atomic_read (&object->use_count) >1 ) { +pr_debug ("kmemleak: object->use_count = %d\n" , +atomic_read (&object->use_count)); +dump_object_info (object); + } +#endif +/* reset the reference count (whiten the object) */ + object->count =0 ; +if (color_gray (object) &&get_object (object)) +list_add_tail (&object->gray_list, &gray_list); + +spin_unlock_irqrestore (&object->lock, flags); + } +rcu_read_unlock (); + +/* data/bss scanning */ +scan_block (_sdata, _edata,NULL ); +scan_block (__bss_start, __bss_stop,NULL ); + +#ifdef CONFIG_SMP +/* per-cpu sections scanning */ +for_each_possible_cpu (i) +scan_block (__per_cpu_start +per_cpu_offset (i), + __per_cpu_end +per_cpu_offset (i),NULL ); +#endif + +#ifdef SCAN_TASK_STACKS +/* +* Scanning the task stacks may introduce false negatives and it is +* not enabled by default. +*/ +read_lock (&tasklist_lock); +for_each_process (task) +scan_block (task_stack_page (task), +task_stack_page (task) +THREAD_SIZE ,NULL ); +read_unlock (&tasklist_lock); +#endif + +/* +* Scan the objects already referenced from the sections scanned +* above. More objects will be referenced and, if there are no memory +* leaks, all the objects will be scanned. The list traversal is safe +* for both tail additions and removals from inside the loop. The +* memleak objects cannot be freed from outside the loop because their +* use_count was increased. +*/ + object =list_entry (gray_list.next,typeof (*object), gray_list); +while (&object->gray_list != &gray_list) { +scan_yield (); + +/* may add new objects to the list */ +if (!scan_should_stop ()) +scan_object (object); + + tmp =list_entry (object->gray_list.next,typeof (*object), + gray_list); + +/* remove the object from the list and release it */ +list_del (&object->gray_list); +put_object (object); + + object = tmp; + } +BUG_ON (!list_empty (&gray_list)); +} + +/* +* Iterate over the object_list and return the first valid object at or after +* the required position with its use_count incremented. The function triggers +* a memory scanning when the pos argument points to the first position. +*/ +static void *memleak_seq_start (struct seq_file *seq,loff_t *pos) +{ +struct memleak_object *object; +loff_t n = *pos; + +if (!atomic_read (&memleak_enabled)) { +seq_printf (seq,"Kernel memory leak detector disabled\n" ); +return ERR_PTR (-EBUSY ); + } +if (!n) { +memleak_scan (); + reported_leaks =0 ; + } +if (reported_leaks >=REPORTS_NR ) +return NULL ; + +rcu_read_lock (); +list_for_each_entry_rcu (object, &object_list, object_list) { +if (n-- >0 ) +continue ; +if (get_object (object)) + goto out; + } + object =NULL ; + out: +rcu_read_unlock (); +return object; +} + +/* +* Return the next object in the object_list. The function decrements the +* use_count of the previous object and increases that of the next one. +*/ +static void *memleak_seq_next (struct seq_file *seq,void *v,loff_t *pos) +{ +struct memleak_object *prev_obj = v; +struct memleak_object *next_obj =NULL ; +struct list_head *n = &prev_obj->object_list; + + ++(*pos); +if (reported_leaks >=REPORTS_NR ) + goto out; + +rcu_read_lock (); +list_for_each_continue_rcu (n, &object_list) { + next_obj = list_entry(n, struct memleak_object, object_list); +if (get_object (next_obj)) +break ; + } +rcu_read_unlock (); + out: +put_object (prev_obj); +return next_obj; +} + +/* +* Decrement the use_count of the last object required, if any. +*/ +static void memleak_seq_stop (struct seq_file *seq,void *v) +{ +if (v) +put_object (v); +} + +/* +* Print the information for an unreferenced object to the seq file. +*/ +static int memleak_seq_show (struct seq_file *seq,void *v) +{ +struct memleak_object *object = v; +unsigned long flags; + +spin_lock_irqsave (&object->lock, flags); +if (!unreferenced_object (object)) + goto out; +print_unreferenced (seq, object); + reported_leaks++; +out: +spin_unlock_irqrestore (&object->lock, flags); +return 0 ; +} + +static const struct seq_operations memleak_seq_ops = { + .start = memleak_seq_start, + .next = memleak_seq_next, + .stop = memleak_seq_stop, + .show = memleak_seq_show, +}; + +static int memleak_seq_open (struct inode *inode,struct file *file) +{ +int ret =mutex_lock_interruptible (&scan_mutex); +if (ret <0 ) +return ret; + ret =seq_open (file, &memleak_seq_ops); +if (ret <0 ) +mutex_unlock (&scan_mutex); +return ret; +} + +static int memleak_seq_release (struct inode *inode,struct file *file) +{ +int ret =seq_release (inode, file); +mutex_unlock (&scan_mutex); +return ret; +} + +static const struct file_operations memleak_fops = { + .owner =THIS_MODULE , + .open = memleak_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = memleak_seq_release, +}; + +/* +* Thread function performing automatic memory scanning. Unreferenced objects +* at the end of a memory scan are reported but only the first time. +*/ +static int memleak_scan_thread (void *arg) +{ +/* +* Wait before the first scan to allow the system to fully initialize. +*/ +ssleep (SECS_FIRST_SCAN ); + +while (!kthread_should_stop ()) { +struct memleak_object *object; +int ret; + + ret =mutex_lock_interruptible (&scan_mutex); +if (ret <0 ) +continue ; + +memleak_scan (); + reported_leaks =0 ; + +rcu_read_lock (); +list_for_each_entry_rcu (object, &object_list, object_list) { +unsigned long flags; + +if (reported_leaks >=REPORTS_NR ) +break ; +spin_lock_irqsave (&object->lock, flags); +if (!(object->flags &OBJECT_REPORTED ) && +unreferenced_object (object)) { +print_unreferenced (NULL , object); + object->flags |=OBJECT_REPORTED ; + reported_leaks++; + } +spin_unlock_irqrestore (&object->lock, flags); + } +rcu_read_unlock (); + +mutex_unlock (&scan_mutex); +/* sleep before the next scan */ +ssleep (SECS_SCAN_PERIOD ); + } + +return 0 ; +} + +/* +* Perform the freeing of the kmemleak internal objects after waiting for any +* current memory scan to complete. +*/ +static int memleak_cleanup_thread (void *arg) +{ +struct memleak_object *object; + +mutex_lock (&scan_mutex); +rcu_read_lock (); +list_for_each_entry_rcu (object, &object_list, object_list) +delete_object (object->pointer); +rcu_read_unlock (); +mutex_unlock (&scan_mutex); + +return 0 ; +} + +/* +* Start the clean-up thread. +*/ +static void memleak_cleanup (void ) +{ +struct task_struct *cleanup_thread; + + cleanup_thread =kthread_run (memleak_cleanup_thread,NULL , +"kmemleak-cleanup" ); +if (IS_ERR (cleanup_thread)) +pr_warning ("kmemleak: Failed to create the clean-up thread\n" ); +} + +/* +* Disable kmemleak. No memory allocation/freeing will be traced once this +* function is called. Disabling kmemleak is an irreversible operation. +*/ +static void memleak_disable (void ) +{ +if (atomic_cmpxchg (&memleak_error,0 ,1 )) +return ; + +/* stop any memory operation tracing */ +atomic_set (&memleak_early_log,0 ); +atomic_set (&memleak_enabled,0 ); + +/* check whether it is too early for a kernel thread */ +if (atomic_read (&memleak_initialized)) +memleak_cleanup (); + +pr_info ("Kernel memory leak detector disabled\n" ); +} + +/* +* Kmemleak initialization. +*/ +void __init memleak_init (void ) +{ +int i; +unsigned long flags; + + jiffies_scan_yield =msecs_to_jiffies (MSECS_SCAN_YIELD ); + jiffies_min_age =msecs_to_jiffies (MSECS_MIN_AGE ); + + object_cache =KMEM_CACHE (memleak_object,SLAB_NOLEAKTRACE ); + scan_area_cache =KMEM_CACHE (memleak_scan_area,SLAB_NOLEAKTRACE ); +INIT_PRIO_TREE_ROOT (&object_tree_root); + +/* the kernel is still in UP mode, so disabling the IRQs is enough */ +local_irq_save (flags); +if (!atomic_read (&memleak_error)) { +atomic_set (&memleak_enabled,1 ); +atomic_set (&memleak_early_log,0 ); + } +local_irq_restore (flags); + +/* +* This is the point where tracking allocations is safe. Automatic +* scanning is started during the late initcall. Add the early logged +* callbacks to the kmemleak infrastructure. +*/ +for (i =0 ; i < crt_early_log; i++) { +struct early_log *log = &early_log[i]; + +switch (log->op_type) { +case MEMLEAK_ALLOC : +memleak_alloc (log->ptr, log->size, log->min_count, +GFP_ATOMIC ); +break ; +case MEMLEAK_FREE : +memleak_free (log->ptr); +break ; +case MEMLEAK_NOT_LEAK : +memleak_not_leak (log->ptr); +break ; +case MEMLEAK_IGNORE : +memleak_ignore (log->ptr); +break ; +case MEMLEAK_SCAN_AREA : +memleak_scan_area (log->ptr, log->offset, log->length, +GFP_ATOMIC ); +break ; +default : +BUG (); + } + } +} + +/* +* Late initialization function. +*/ +static int __init memleak_late_init (void ) +{ +struct dentry *dentry; + +atomic_set (&memleak_initialized,1 ); + +if (atomic_read (&memleak_error)) { +/* +* Some error occured and kmemleak was disabled. There is a +* small chance that memleak_disable() was called immediately +* after setting memleak_initialized and we may end up with +* two clean-up threads but serialized by scan_mutex. +*/ +memleak_cleanup (); +return -EBUSY ; + } + + dentry =debugfs_create_file ("memleak" ,S_IRUGO ,NULL ,NULL , + &memleak_fops); +if (!dentry) +return -ENOMEM ; + + scan_thread =kthread_run (memleak_scan_thread,NULL ,"kmemleak" ); +if (IS_ERR (scan_thread)) +pr_warning ("kmemleak: Failed to create the scan thread\n" ); + +pr_info ("Kernel memory leak detector initialized\n" ); + +return 0 ; +} +late_initcall (memleak_late_init);
Re: [PATCH 01/15] kmemleak: Add the base support
Quoted 11 lines · Paul E. McKenney
Quoted 6 lines · Catalin Marinas
This patch adds the base support for the kernel memory leak detector. It traces the memory allocation/freeing in a way similar to the Boehm's conservative garbage collector, the difference being that the unreferenced objects are not freed but only shown in
/sys/kernel/debug/memleak. Enabling this feature introduces an overhead to memory allocations.Looks good to me from an RCU viewpoint!
Reviewed-by Paul E. McKenney <[email protected]>
Thanks for reviewing it.
FYI, in the version I'm going to post this week I added another mutex to ensure the exclusive opening of the /sys/kernel/debug/memleak file as one can now use this file to configure kmemleak at run-time. The RCU locking isn't affected and I'll add your "Reviewed-by:" line.
Signature · 1 line
Catalin
Re: [PATCH 01/15] kmemleak: Add the base support
Quoted 11 lines · Catalin Marinas
Quoted 10 lines · Paul E. McKenney
Quoted 6 lines · Catalin Marinas
This patch adds the base support for the kernel memory leak detector. It traces the memory allocation/freeing in a way similar to the Boehm's conservative garbage collector, the difference being that the unreferenced objects are not freed but only shown in
/sys/kernel/debug/memleak. Enabling this feature introduces an overhead to memory allocations.Looks good to me from an RCU viewpoint!
Quoted 8 lines
Quoted 1 line
Reviewed-by Paul E. McKenney <[email protected]>Thanks for reviewing it.
FYI, in the version I'm going to post this week I added another mutex to ensure the exclusive opening of the
/sys/kernel/debug/memleakfile as one can now use this file to configure kmemleak at run-time. The RCU locking isn't affected and I'll add your "Reviewed-by:" line.
Fair enough!
Thanx, Paul
PATCH 2/15 kmemleak: Add documentation on the memory leak detector
In reply to Catalin MarinasThis patch adds the Documentation/kmemleak.txt file with some information about how kmemleak works.
--- Documentation/kmemleak.txt | 127 ++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 127 insertions(+), 0 deletions(-) create mode 100644 Documentation/kmemleak.txt
Documentation/kmemleak.txt new file +127 -0
@@ -0,0 +1,127 @@ +Kernel Memory Leak Detector +=========================== + +Introduction +------------ + +Kmemleak provides a way of detecting possible kernel memory leaks in a +way similar to a tracing garbage collector +(http://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors), +with the difference that the orphan objects are not freed but only +reported via /sys/kernel/debug/memleak. A similar method is used by the +Valgrind tool (memcheck --leak-check) to detect the memory leaks in +user-space applications. + +Usage +----- + +CONFIG_DEBUG_MEMLEAK in "Kernel hacking" has to be enabled. A kernel +thread scans the memory every 10 min (by default) and prints any new +unreferenced objects found. To trigger an intermediate scan and display +all the possible memory leaks: + + # mount -t debugfs nodev /sys/kernel/debug/ + # cat /sys/kernel/debug/memleak + +Note that the orphan objects are listed in the order they were allocated +and one object at the beginning of the list may cause other subsequent +objects to be reported as orphan. + +Basic Algorithm +--------------- + +The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and +friends are traced and the pointers, together with additional +information like size and stack trace, are stored in a prio search tree. +The corresponding freeing function calls are tracked and the pointers +removed from the kmemleak data structures. + +An allocated block of memory is considered orphan if no pointer to its +start address or to any location inside the block can be found by +scanning the memory (including saved registers). This means that there +might be no way for the kernel to pass the address of the allocated +block to a freeing function and therefore the block is considered a +memory leak. + +The scanning algorithm steps: + + 1. mark all objects as white (remaining white objects will later be + considered orphan) + 2. scan the memory starting with the data section and stacks, checking + the values against the addresses stored in the prio search tree. If + a pointer to a white object is found, the object is added to the + gray list + 3. scan the gray objects for matching addresses (some white objects + can become gray and added at the end of the gray list) until the + gray set is finished + 4. the remaining white objects are considered orphan and reported via + /sys/kernel/debug/memleak + +Some allocated memory blocks have pointers stored in the kernel's +internal data structures and they cannot be detected as orphans. To +avoid this, kmemleak can also store the number of values pointing to an +address inside the block address range that need to be found so that the +block is not considered a leak. One example is __vmalloc(). + +Kmemleak API +------------ + +See the include/linux/memleak.h header for the functions prototype. + +memleak_init - initialize kmemleak +memleak_alloc - notify of a memory block allocation +memleak_free - notify of a memory block freeing +memleak_not_leak - mark an object as not a leak +memleak_ignore - do not scan or report an object as leak +memleak_scan_area - add scan areas inside a memory block +memleak_erase - erase an old value in a pointer variable +memleak_alloc_recursive - as memleak_alloc but checks the recursiveness +memleak_free_recursive - as memleak_free but checks the recursiveness + +Dealing with false positives/negatives +-------------------------------------- + +The false negatives are real memory leaks (orphan objects) but not +reported by kmemleak because values found during the memory scanning +point to such objects. To reduce the number of false negatives, kmemleak +provides the memleak_ignore, memleak_scan_area and memleak_erase +functions (see above). The task stacks also increase the amount of false +negatives and their scanning is not enabled by default. + +The false positives are objects wrongly reported as being memory leaks +(orphan). For objects known not to be leaks, kmemleak provides the +memleak_not_leak function. The memleak_ignore could also be used if the +memory block is known not to contain other pointers and it will no +longer be scanned. + +Some of the reported leaks are only transient, especially on SMP +systems, because of pointers temporarily stored in CPU registers or +stacks. Kmemleak defines MSECS_MIN_AGE (defaulting to 1000) representing +the minimum age of an object to be reported as a memory leak. + +Limitations and Drawbacks +------------------------- + +The main drawback is the reduced performance of memory allocation and +freeing. To avoid other penalties, the memory scanning is only performed +when the /sys/kernel/debug/memleak file is read. Anyway, this tool is +intended for debugging purposes where the performance might not be the +most important requirement. + +To keep the algorithm simple, kmemleak scans for values pointing to any +address inside a block's address range. This may lead to an increased +number of false negatives. However, it is likely that a real memory leak +will eventually become visible. + +Another source of false negatives is the data stored in non-pointer +values. In a future version, kmemleak could only scan the pointer +members in the allocated structures. This feature would solve many of +the false negative cases described above. + +The tool can report false positives. These are cases where an allocated +block doesn't need to be freed (some cases in the init_call functions), +the pointer is calculated by other methods than the usual container_of +macro or the pointer is stored in a location not scanned by kmemleak. + +Page allocations and ioremap are not tracked. Only the ARM and i386 +architectures are currently supported.
PATCH 3/15 kmemleak: Add the slab memory allocation/freeing hooks
In reply to Catalin MarinasThis patch adds the callbacks to memleak_(alloc|free) functions from the slab allocator. The patch also adds the SLAB_NOLEAKTRACE flag to avoid recursive calls to kmemleak when it allocates its own data structures.
--- include/linux/slab.h | 2 ++ mm/slab.c | 18 ++++++++++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-)
include/linux/slab.h +2 -0
@@ -62,6 +62,8 @@# define SLAB_DEBUG_OBJECTS 0x00000000UL#endif +#define SLAB_NOLEAKTRACE 0x00800000UL/* Avoid kmemleak tracing */ +/* The following flags affect the page allocator grouping pages by mobility */ #define SLAB_RECLAIM_ACCOUNT 0x00020000UL/* Objects are reclaimable */ #define SLAB_TEMPORARY SLAB_RECLAIM_ACCOUNT/* Objects are short-lived */
mm/slab.c +16 -2
@@ -106,6 +106,7 @@#include <linux/string.h> #include <linux/uaccess.h> #include <linux/nodemask.h> +#include <linux/memleak.h> #include <linux/mempolicy.h> #include <linux/mutex.h> #include <linux/fault-inject.h>
@@ -177,13 +178,13 @@ SLAB_STORE_USER | \ SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \ SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD | \ - SLAB_DEBUG_OBJECTS) + SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE)#else # define CREATE_MASK (SLAB_HWCACHE_ALIGN | \ SLAB_CACHE_DMA | \ SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \ SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD | \ - SLAB_DEBUG_OBJECTS) + SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE)#endif /*
@@ -2610,6 +2611,13 @@ static struct slab *alloc_slabmgmt(struct kmem_cache *cachep, void *objp,/* Slab management obj is off-slab. */ slabp =kmem_cache_alloc_node (cachep->slabp_cache, local_flags & ~GFP_THISNODE , nodeid); +/* +* Only scan the list member to avoid false negatives +* (especially caused by the s_mem pointer) +*/ +memleak_scan_area (slabp, offsetof(struct slab , list), +sizeof (struct list_head ), + local_flags & ~GFP_THISNODE );if (!slabp)return NULL ; }else {
@@ -3195,6 +3203,8 @@ static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags)STATS_INC_ALLOCMISS (cachep); objp =cache_alloc_refill (cachep, flags); } +/* avoid false negatives */ +memleak_erase (&ac->entry[ac->avail]);return objp; }
@@ -3412,6 +3422,7 @@ __cache_alloc_node(struct kmem_cache *cachep, gfp_t flags, int nodeid, out:local_irq_restore (save_flags); ptr =cache_alloc_debugcheck_after (cachep, flags, ptr, caller); +memleak_alloc_recursive (ptr,obj_size (cachep),1 , cachep->flags, flags);if (unlikely ((flags & __GFP_ZERO) && ptr))memset (ptr,0 ,obj_size (cachep));
@@ -3465,6 +3476,8 @@ __cache_alloc(struct kmem_cache *cachep, gfp_t flags, void *caller) objp =__do_cache_alloc (cachep, flags);local_irq_restore (save_flags); objp =cache_alloc_debugcheck_after (cachep, flags, objp, caller); +memleak_alloc_recursive (objp,obj_size (cachep),1 , cachep->flags, + flags);prefetchw (objp);if (unlikely ((flags & __GFP_ZERO) && objp))
@@ -3580,6 +3593,7 @@ static inline void __cache_free(struct kmem_cache *cachep, void *objp)struct array_cache *ac =cpu_cache_get (cachep);check_irq_off (); +memleak_free_recursive (objp, cachep->flags); objp =cache_free_debugcheck (cachep, objp,__builtin_return_address (0 ));/*
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
Quoted 4 lines · Catalin Marinas
This patch adds the callbacks to
memleak_(alloc|free)functions from the slab allocator. The patch also adds theSLAB_NOLEAKTRACEflag to avoid recursive calls to kmemleak when it allocates its own data structures.
You might also want to try [email protected] for these. You'll probably get some better review there, and they're just _kinda_ mm related. ;)
-- Dave
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
In reply to Catalin Marinasmm/slab.c static inline void *____cache_alloc(struct · line 3210
Quoted 9 lines · Catalin Marinas
mm/slab.c +2
-0@@ -3195,6 +3203,8 @@ static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags)STATS_INC_ALLOCMISS (cachep ); objp =cache_alloc_refill (cachep, flags); } +/* avoid false negatives */ +memleak_erase (&ac->entry[ac->avail]);return objp; }
It would be really nice here to say *how* it is avoiding false negatives. :)
How about:
/* Don't let the pointer from the slab itself count as referencing */
-- Dave
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
In reply to Catalin MarinasHi Catalin,
mm/slab.c static struct slab *alloc_slabmgmt(struct kmem_cache *cachep, void *objp, · line 2617
Quoted 8 lines · Catalin Marinas
mm/slab.c +4
-0@@ -2610,6 +2611,13 @@ static struct slab *alloc_slabmgmt(struct kmem_cache *cachep, void *objp,/* Slab management obj is off-slab. */ slabp =kmem_cache_alloc_node (cachep->slabp_cache, local_flags & ~GFP_THISNODE , nodeid); +/* +* Only scan the list member to avoid false negatives +* (especially caused by the s_mem pointer) +*/
Heh, I run into this part again and as I have a long term memory of a goldfish I had to look up the discussion we had. So may I suggest you change the comment to:
/*
* If the first object in the slab is leaked (it's allocated but no
* one has a reference to it), we want to make sure kmemleak does not
* treat the ->s_mem pointer as a reference to the object. Otherwise
* we will not report the leak.
*/
mm/slab.c static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags) · line 3207
Quoted 12 lines
mm/slab.c +5
-0+memleak_scan_area (slabp, offsetof(struct slab , list), +sizeof (struct list_head ), + local_flags & ~GFP_THISNODE );if (!slabp)return NULL ; }else {@@ -3195,6 +3203,8 @@ static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags)STATS_INC_ALLOCMISS (cachep); objp =cache_alloc_refill (cachep, flags); } +/* avoid false negatives */ +memleak_erase (&ac->entry[ac->avail]);
For this, maybe something like this:
/*
* To avoid a false negative, if an object that is in one of the
* per-CPU caches is leaked, we need to make sure kmemleak doesn't
* treat the array pointers as a reference to the object. */
mm/slab.c static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags) · line 3210
Quoted 3 lines
mm/slab.c +0
-0return objp; }
Do you take care of the per-node lists as well?
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
Quoted 14 lines · Pekka Enberg
mm/slab.c static struct slab *alloc_slabmgmt(struct kmem_cache *cachep, void *objp, · line 2617
Quoted 8 lines · Catalin Marinas
mm/slab.c +4
-0@@ -2610,6 +2611,13 @@ static struct slab *alloc_slabmgmt(struct kmem_cache *cachep, void *objp,/* Slab management obj is off-slab. */ slabp =kmem_cache_alloc_node (cachep->slabp_cache, local_flags & ~GFP_THISNODE , nodeid); +/* +* Only scan the list member to avoid false negatives +* (especially caused by the s_mem pointer) +*/ Heh, I run into this part again and as I have a long term memory of a goldfish I had to look up the discussion we had. So may I suggest you change the comment to:
Quoted 6 lines
/*
* If the first object in the slab is leaked (it's allocated but no
* one has a reference to it), we want to make sure kmemleak does not
* treat the ->s_mem pointer as a reference to the object. Otherwise
* we will not report the leak.
*/
OK, thanks. It's more verbose but it makes it pretty clear.
Quoted 15 lines
mm/slab.c static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags) · line 3207
Quoted 12 lines
mm/slab.c +5
-0+memleak_scan_area (slabp, offsetof(struct slab , list), +sizeof (struct list_head ), + local_flags & ~GFP_THISNODE );if (!slabp)return NULL ; }else {@@ -3195,6 +3203,8 @@ static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags)STATS_INC_ALLOCMISS (cachep); objp =cache_alloc_refill (cachep, flags); } +/* avoid false negatives */ +memleak_erase (&ac->entry[ac->avail]);For this, maybe something like this:
Quoted 5 lines
/*
* To avoid a false negative, if an object that is in one of the
* per-CPU caches is leaked, we need to make sure kmemleak doesn't
* treat the array pointers as a reference to the object. */
OK.
Quoted 5 lines
mm/slab.c static inline void *____cache_alloc(struct kmem_cache *cachep, gfp_t flags) · line 3210
Quoted 3 lines
mm/slab.c +0
-0return objp; }Do you take care of the per-node lists as well?
I can't figure out what other location should be erased.
Signature · 1 line
Catalin
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
Quoted 3 lines · Catalin Marinas
Quoted 1 line
Do you take care of the per-node lists as well?
I can't figure out what other location should be erased.
As far as I can tell, you need to tell kmemleak not to scan the alien caches and the shared array that is shared by all CPUs that belong to one node. I'm adding Christoph to the CC in case he wants to comment on this.
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
Quoted 9 lines · Pekka Enberg
Quoted 3 lines · Catalin Marinas
Quoted 1 line
Do you take care of the per-node lists as well?
I can't figure out what other location should be erased.
As far as I can tell, you need to tell kmemleak not to scan the alien caches and the shared array that is shared by all CPUs that belong to one node. I'm adding Christoph to the CC in case he wants to comment on this.
In the ____cache_alloc() kmemleak clears the cachep->array->entry[ac->avail] pointer but this may not be enough as freed and later re-allocated objects may have pointers in the alien cache (is that correct?). A better approach (haven't tried it yet) would be not to scan objects allocated via alloc_arraycache() at all. However, there is still the initarray_cache/generic which are automatically scanned via the data section (unless I add an attribute to place them in a different, not scanned, section).
Signature · 1 line
Catalin
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
Quoted 8 lines · Catalin Marinas
In the
____cache_alloc()kmemleak clears the cachep->array->entry[ac->avail] pointer but this may not be enough as freed and later re-allocated objects may have pointers in the alien cache (is that correct?). A better approach (haven't tried it yet) would be not to scan objects allocated viaalloc_arraycache()at all. However, there is still the initarray_cache/generic which are automatically scanned via the data section (unless I add an attribute to place them in a different, not scanned, section).
An allocated object is not part of any cache in SLAB. Only freed objects are kept in the slab queues. A freed object can only be in one queue at a time.
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
Quoted 11 lines · Christoph Lameter
Quoted 8 lines · Catalin Marinas
In the
____cache_alloc()kmemleak clears the cachep->array->entry[ac->avail] pointer but this may not be enough as freed and later re-allocated objects may have pointers in the alien cache (is that correct?). A better approach (haven't tried it yet) would be not to scan objects allocated viaalloc_arraycache()at all. However, there is still the initarray_cache/generic which are automatically scanned via the data section (unless I add an attribute to place them in a different, not scanned, section).
Quoted 3 lines
An allocated object is not part of any cache in SLAB. Only freed objects are kept in the slab queues. A freed object can only be in one queue at a time.
OK, but is there a chance that an stale pointer remains in such caches? There seems to be the transfer_objects() function that moves pointers around but doesn't clear the source values.
Signature · 1 line
Catalin
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
Quoted 1 line · Catalin Marinas
OK, but is there a chance that an stale pointer remains in such caches?
Definitely. The pointers are never cleared. There are counters in the caches that are used to index into an array.
Quoted 2 lines
There seems to be the
transfer_objects()function that moves pointers around but doesn't clear the source values.
No need to. The counter updates take care of things.
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
Quoted 11 lines · Christoph Lameter
Quoted 1 line · Catalin Marinas
OK, but is there a chance that an stale pointer remains in such caches?
Definitely. The pointers are never cleared. There are counters in the caches that are used to index into an array.
Quoted 2 lines
There seems to be the
transfer_objects()function that moves pointers around but doesn't clear the source values.No need to. The counter updates take care of things.
For kmemleak, that's a problem. Unless we explicitly annotate the caches, it will scan them and think that there's a pointer to a leaked object (i.e. false negative). Catalin already took care of the per-CPU caches but AFAICT we still need to take care of the per-node caches and the shared caches.
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
Quoted 5 lines · Pekka Enberg
For kmemleak, that's a problem. Unless we explicitly annotate the caches, it will scan them and think that there's a pointer to a leaked object (i.e. false negative). Catalin already took care of the per-CPU caches but AFAICT we still need to take care of the per-node caches and the shared caches.
Why doesnt kmemleak simply use the counter as a boundary and only access those pointers that are valid?
Re: [PATCH 03/15] kmemleak: Add the slab memory allocation/freeing hooks
Quoted 10 lines · Christoph Lameter
Quoted 5 lines · Pekka Enberg
For kmemleak, that's a problem. Unless we explicitly annotate the caches, it will scan them and think that there's a pointer to a leaked object (i.e. false negative). Catalin already took care of the per-CPU caches but AFAICT we still need to take care of the per-node caches and the shared caches.
Why doesnt kmemleak simply use the counter as a boundary and only access those pointers that are valid?
Since the valid pointers in these caches only point to freed objects (which aren't tracked by kmemleak), it's better for kmemleak not to scan such structures at all. I added a kmemleak_no_scan() annotation for this.
Thanks for clarification.
Signature · 1 line
Catalin
PATCH 4/15 kmemleak: Add the slob memory allocation/freeing hooks
In reply to Catalin MarinasThis patch adds the callbacks to memleak_(alloc|free) functions from the slob allocator.
--- mm/slob.c | 15 +++++++++++---- 1 files changed, 11 insertions(+), 4 deletions(-)
mm/slob.c +11 -4
@@ -60,6 +60,7 @@#include <linux/kernel.h> #include <linux/slab.h> #include <linux/mm.h> +#include <linux/memleak.h> #include <linux/cache.h> #include <linux/init.h> #include <linux/module.h>
@@ -463,6 +464,7 @@ void *__kmalloc_node(size_t size, gfp_t gfp, int node) {unsigned int *m;int align =max (ARCH_KMALLOC_MINALIGN ,ARCH_SLAB_MINALIGN ); +void *ret;if (size <PAGE_SIZE - align) {if (!size)
@@ -472,18 +474,18 @@ void *__kmalloc_node(size_t size, gfp_t gfp, int node)if (!m)return NULL ; *m = size; -return (void *)m + align; + ret = (void *)m + align; }else { -void *ret; - ret =slob_new_page (gfp | __GFP_COMP,get_order (size), node);if (ret) {struct page *page; page =virt_to_page (ret); page->private = size; } -return ret; } + +memleak_alloc (ret, size,1 , gfp); +return ret; }EXPORT_SYMBOL (__kmalloc_node);
@@ -493,6 +495,7 @@ void kfree(const void *block)if (unlikely (ZERO_OR_NULL_PTR (block)))return ; +memleak_free (block); sp = (struct slob_page *)virt_to_page (block);if (slob_page (sp)) {
@@ -555,12 +558,14 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size, }else if (flags &SLAB_PANIC )panic ("Cannot create slab cache %s\n" , name); +memleak_alloc (c,sizeof (struct kmem_cache ),1 ,GFP_KERNEL );return c; }EXPORT_SYMBOL (kmem_cache_create);void kmem_cache_destroy (struct kmem_cache *c) { +memleak_free (c);slob_free (c,sizeof (struct kmem_cache )); }EXPORT_SYMBOL (kmem_cache_destroy);
@@ -577,6 +582,7 @@ void *kmem_cache_alloc_node(struct kmem_cache *c, gfp_t flags, int node)if (c->ctor) c->ctor (b); +memleak_alloc_recursive (b, c->size,1 , c->flags, flags);return b; }EXPORT_SYMBOL (kmem_cache_alloc_node);
@@ -599,6 +605,7 @@ static void kmem_rcu_free(struct rcu_head *head)void kmem_cache_free (struct kmem_cache *c,void *b) { +memleak_free_recursive (b, c->flags);if (unlikely (c->flags &SLAB_DESTROY_BY_RCU )) {struct slob_rcu *slob_rcu; slob_rcu = b + (c->size -sizeof (struct slob_rcu ));
Re: [PATCH 04/15] kmemleak: Add the slob memory allocation/freeing hooks
Quoted 2 lines · Catalin Marinas
This patch adds the callbacks to
memleak_(alloc|free)functions from the slob allocator.
Is this different than the last one?
Quoted 89 lines
Signed-off-by Catalin Marinas <[email protected]>Cc Matt Mackall <[email protected]>Cc Pekka Enberg <[email protected]>--- mm/slob.c | 15 +++++++++++---- 1 files changed, 11 insertions(+), 4 deletions(-)mm/slob.c +11
-4@@ -60,6 +60,7 @@#include <linux/kernel.h> #include <linux/slab.h> #include <linux/mm.h> +#include <linux/memleak.h> #include <linux/cache.h> #include <linux/init.h> #include <linux/module.h> @@ -463,6 +464,7 @@ void *__kmalloc_node(size_t size, gfp_t gfp, int node) {unsigned int *m;int align =max (ARCH_KMALLOC_MINALIGN ,ARCH_SLAB_MINALIGN ); +void *ret;if (size <PAGE_SIZE - align) {if (!size)@@ -472,18 +474,18 @@ void *__kmalloc_node(size_t size, gfp_t gfp, int node)if (!m)return NULL ; *m = size; -return (void *)m + align; + ret = (void *)m + align; }else { -void *ret; - ret =slob_new_page (gfp | __GFP_COMP,get_order (size), node);if (ret) {struct page *page; page =virt_to_page (ret); page->private = size; } -return ret; } + +memleak_alloc (ret, size,1 , gfp); +return ret; }EXPORT_SYMBOL (__kmalloc_node);@@ -493,6 +495,7 @@ void kfree(const void *block)if (unlikely (ZERO_OR_NULL_PTR (block)))return ; +memleak_free (block); sp = (struct slob_page *)virt_to_page (block);if (slob_page (sp)) {@@ -555,12 +558,14 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size, }else if (flags &SLAB_PANIC )panic ("Cannot create slab cache %s\n" , name); +memleak_alloc (c,sizeof (struct kmem_cache ),1 ,GFP_KERNEL );return c; }EXPORT_SYMBOL (kmem_cache_create);void kmem_cache_destroy (struct kmem_cache *c) { +memleak_free (c);slob_free (c,sizeof (struct kmem_cache )); }EXPORT_SYMBOL (kmem_cache_destroy);@@ -577,6 +582,7 @@ void *kmem_cache_alloc_node(struct kmem_cache *c, gfp_t flags, int node)if (c->ctor) c->ctor (b); +memleak_alloc_recursive (b, c->size,1 , c->flags, flags);return b; }EXPORT_SYMBOL (kmem_cache_alloc_node);@@ -599,6 +605,7 @@ static void kmem_rcu_free(struct rcu_head *head)void kmem_cache_free (struct kmem_cache *c,void *b) { +memleak_free_recursive (b, c->flags);if (unlikely (c->flags &SLAB_DESTROY_BY_RCU )) {struct slob_rcu *slob_rcu; slob_rcu = b + (c->size -sizeof (struct slob_rcu ));
Signature · 1 line
Mathematics is the supreme nostalgia of our time.
Re: [PATCH 04/15] kmemleak: Add the slob memory allocation/freeing hooks
Quoted 5 lines · Matt Mackall
Quoted 2 lines · Catalin Marinas
This patch adds the callbacks to
memleak_(alloc|free)functions from the slob allocator.Is this different than the last one?
Slightly. It now passes the gfp flags to the memleak_alloc callback (that's how I noticed that slob_alloc gets the SLAB_* flags).
Quoted 1 line
Acked-by Matt Mackall <[email protected]>
Thanks.
Signature · 1 line
Catalin
Re: [PATCH 04/15] kmemleak: Add the slob memory allocation/freeing hooks
In reply to Catalin MarinasQuoted 6 lines · Catalin Marinas
This patch adds the callbacks to
memleak_(alloc|free)functions from the slob allocator.Signed-off-by Catalin Marinas <[email protected]>Cc Matt Mackall <[email protected]>Cc Pekka Enberg <[email protected]>
PATCH 5/15 kmemleak: Add the slub memory allocation/freeing hooks
In reply to Catalin MarinasThis patch adds the callbacks to memleak_(alloc|free) functions from the slub allocator.
--- mm/slub.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)
mm/slub.c +4 -1
@@ -18,6 +18,7 @@#include <linux/seq_file.h> #include <linux/cpu.h> #include <linux/cpuset.h> +#include <linux/memleak.h> #include <linux/mempolicy.h> #include <linux/ctype.h> #include <linux/debugobjects.h>
@@ -140,7 +141,7 @@* Set of flags that will prevent slab merging */ #define SLUB_NEVER_MERGE (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \ - SLAB_TRACE | SLAB_DESTROY_BY_RCU) + SLAB_TRACE | SLAB_DESTROY_BY_RCU | SLAB_NOLEAKTRACE)#define SLUB_MERGE_SAME (SLAB_DEBUG_FREE | SLAB_RECLAIM_ACCOUNT | \ SLAB_CACHE_DMA)
@@ -1608,6 +1609,7 @@ static __always_inline void *slab_alloc(struct kmem_cache *s,if (unlikely ((gfpflags & __GFP_ZERO) && object))memset (object,0 , objsize); +memleak_alloc_recursive (object, objsize,1 , s->flags, gfpflags);return object; }
@@ -1710,6 +1712,7 @@ static __always_inline void slab_free(struct kmem_cache *s,struct kmem_cache_cpu *c;unsigned long flags; +memleak_free_recursive (x, s->flags);local_irq_save (flags); c =get_cpu_slab (s,smp_processor_id ());debug_check_no_locks_freed (object, c->objsize);
Re: [PATCH 05/15] kmemleak: Add the slub memory allocation/freeing hooks
Quoted 6 lines · Catalin Marinas
This patch adds the callbacks to
memleak_(alloc|free)functions from the slub allocator.Signed-off-by Catalin Marinas <[email protected]>Cc Christoph Lameter <[email protected]>Cc Pekka Enberg <[email protected]>
Hmm, I'm not sure I understand why struct kmem_cache_cpu ->freelist is never scanned. For SMP, I suppose kmemleak doesn't scan the per-CPU areas? But for UP, struct kmem_cache is allocated with kmalloc() and that contains struct kmem_cache_cpu as well.
And I suppose we never scan struct pages either. Otherwise ->freelist there would be a problem as well.
Pekka
Re: [PATCH 05/15] kmemleak: Add the slub memory allocation/freeing hooks
Quoted 10 lines · Pekka Enberg
Quoted 6 lines · Catalin Marinas
This patch adds the callbacks to
memleak_(alloc|free)functions from the slub allocator.Signed-off-by Catalin Marinas <[email protected]>Cc Christoph Lameter <[email protected]>Cc Pekka Enberg <[email protected]>Hmm, I'm not sure I understand why struct
kmem_cache_cpu->freelist is never scanned.
Did you get any false positives? Or were you expecting false negatives because of freelist scanning which never occurred?
Quoted 2 lines
For SMP, I suppose kmemleak doesn't scan the per-CPU areas?
It should scan the per-CPU areas in the memleak_scan() function:
#ifdef CONFIG_SMP /* per-cpu sections scanning */ for_each_possible_cpu(i) scan_block(__per_cpu_start + per_cpu_offset(i), __per_cpu_end + per_cpu_offset(i), NULL);
#endif
Quoted 2 lines
But for UP, struct
kmem_cacheis allocated withkmalloc()and
that contains structkmem_cache_cpuas well.
They should be scanned as well.
Quoted 2 lines
And I suppose we never scan struct pages either. Otherwise ->freelist there would be a problem as well.
It was scanning the mem_map arrays in the past but removed this part and haven't seen any problems (on ARM).
Why would the ->freelist be a problem? I don't fully understand the slub allocator. Aren't objects added to the freelist only after they were freed? In __slab_alloc there seems to be a line:
c->page->freelist = NULL;
so the freelist won't count as a reference anymore. After freeing an object, kmemleak no longer cares about references to it.
Signature · 1 line
Catalin
Re: [PATCH 05/15] kmemleak: Add the slub memory allocation/freeing hooks
Hi Catalin,
Quoted 5 lines · Catalin Marinas
Quoted 2 lines
Hmm, I'm not sure I understand why struct
kmem_cache_cpu->freelist is never scanned.Did you get any false positives? Or were you expecting false negatives because of freelist scanning which never occurred?
I haven't tested kmemleak so I'm just commenting on the code. I was thinking about false negatives, not false positives.
Quoted 23 lines · Catalin Marinas
Quoted 2 lines
For SMP, I suppose kmemleak doesn't scan the per-CPU areas?
It should scan the per-CPU areas in the
memleak_scan()function:#ifdef CONFIG_SMP /* per-cpu sections scanning */ for_each_possible_cpu(i) scan_block(__per_cpu_start + per_cpu_offset(i), __per_cpu_end + per_cpu_offset(i), NULL);#endif
Quoted 2 lines
But for UP, struct
kmem_cacheis allocated withkmalloc()and
that contains structkmem_cache_cpuas well.They should be scanned as well.
Quoted 2 lines
And I suppose we never scan struct pages either. Otherwise ->freelist there would be a problem as well.
It was scanning the
mem_maparrays in the past but removed this part and haven't seen any problems (on ARM).
Quoted 8 lines
Why would the ->freelist be a problem? I don't fully understand the slub allocator. Aren't objects added to the freelist only after they were freed? In
__slab_allocthere seems to be a line:
c->page->freelist= NULL;so the freelist won't count as a reference anymore. After freeing an object, kmemleak no longer cares about references to it.
I think we're talking about two different things here. Don't we then have false negatives because we reach ->freelist of struct kmem_cache_cpu which contains a pointer to an object that is free'd (take a look at slab_free() fast-path)?
Pekka
Re: [PATCH 05/15] kmemleak: Add the slub memory allocation/freeing hooks
Hi Pekka,
Quoted 11 lines · Pekka Enberg
Quoted 10 lines · Catalin Marinas
Quoted 2 lines · Pekka Enberg
Hmm, I'm not sure I understand why struct
kmem_cache_cpu->freelist is never scanned.Why would the ->freelist be a problem? I don't fully understand the slub allocator. Aren't objects added to the freelist only after they were freed? In
__slab_allocthere seems to be a line:
c->page->freelist= NULL;
Quoted 7 lines
Quoted 2 lines
so the freelist won't count as a reference anymore. After freeing an object, kmemleak no longer cares about references to it.
I think we're talking about two different things here. Don't we then have false negatives because we reach ->freelist of struct
kmem_cache_cpuwhich contains a pointer to an object that is free'd (take a look atslab_free()fast-path)?
Just to make sure I understand it correctly, the slab_free() fast path stores the pointer to the freed object into c->freelist. However, this object is no longer tracked by kmemleak because of the kmemleak_free_recursive() call at the beginning of this function (false negatives make sense only for allocated objects).
On the slab_alloc() fast path, the pointer to an allocated object is obtained from the c->freelist pointer but this seems to be overridden by the pointer to the next free object, object[c->offset], which isn't yet tracked by kmemleak. So, during a memory scan, it shouldn't matter that the kmem_cache_cpu structures are called as they don't contain any pointer to an allocated (not free) object.
The new slabs are allocated with alloc_pages() and these are not tracked by kmemleak.
Is my understanding correct? Thanks.
Signature · 1 line
Catalin
Re: [PATCH 05/15] kmemleak: Add the slub memory allocation/freeing hooks
Hi Catalin,
Quoted 5 lines · Catalin Marinas
Just to make sure I understand it correctly, the
slab_free()fast path stores the pointer to the freed object intoc->freelist. However, this object is no longer tracked by kmemleak because of thekmemleak_free_recursive()call at the beginning of this function (false negatives make sense only for allocated objects).
Indeed. For SLAB, it's a problem because the per-CPU cache pointer is not cleared from the struct array_cache upon _allocation_ which is the culprit of the false negative there.
Quoted 1 line · Catalin Marinas
Is my understanding correct? Thanks.
Yes, it is and I was just confused. Thanks!
Pekka
PATCH 6/15 kmemleak: Add the vmalloc memory allocation/freeing hooks
In reply to Catalin MarinasThis patch adds the callbacks to memleak_(alloc|free) functions from vmalloc/vfree.
--- mm/vmalloc.c | 29 ++++++++++++++++++++++++++--- 1 files changed, 26 insertions(+), 3 deletions(-)
mm/vmalloc.c +26 -3
@@ -23,6 +23,7 @@#include <linux/rbtree.h> #include <linux/radix-tree.h> #include <linux/rcupdate.h> +#include <linux/memleak.h> #include <asm/atomic.h> #include <asm/uaccess.h>
@@ -1196,6 +1197,9 @@ static void __vunmap(const void *addr, int deallocate_pages)void vfree (const void *addr) {BUG_ON (in_interrupt ()); + +memleak_free (addr); +__vunmap (addr,1 ); }EXPORT_SYMBOL (vfree);
@@ -1305,8 +1309,17 @@ fail:void *__vmalloc_area (struct vm_struct *area,gfp_t gfp_mask,pgprot_t prot) { -return __vmalloc_area_node (area, gfp_mask, prot,-1 , -__builtin_return_address (0 )); +void *addr =__vmalloc_area_node (area, gfp_mask, prot,-1 , +__builtin_return_address (0 )); + +/* +* This needs ref_count = 2 since vm_struct also contains a +* pointer to this address. The guard page is also subtracted +* from the size. +*/ +memleak_alloc (addr, area->size -PAGE_SIZE ,2 , gfp_mask); + +return addr; }/**
@@ -1325,6 +1338,8 @@ static void *__vmalloc_node(unsigned long size, gfp_t gfp_mask, pgprot_t prot, int node, void *caller) { struct vm_struct *area; +void *addr; +unsigned long real_size = size; size =PAGE_ALIGN (size);if (!size || (size >>PAGE_SHIFT ) > num_physpages)
@@ -1336,7 +1351,15 @@ static void *__vmalloc_node(unsigned long size, gfp_t gfp_mask, pgprot_t prot,if (!area)return NULL ; -return __vmalloc_area_node (area, gfp_mask, prot, node, caller); + addr =__vmalloc_area_node (area, gfp_mask, prot, node, caller); + +/* +* This needs ref_count = 2 since the vm_struct also contains +* a pointer to this address. +*/ +memleak_alloc (addr, real_size,2 , gfp_mask); + +return addr; }void *__vmalloc (unsigned long size,gfp_t gfp_mask,pgprot_t prot)
PATCH 7/15 kmemleak: Add memleak_alloc callback from alloc_large_system_hash
In reply to Catalin MarinasThe alloc_large_system_hash function is called from various places in the kernel and it contains pointers to other allocated structures. It therefore needs to be traced by kmemleak.
--- mm/page_alloc.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
mm/page_alloc.c +3 -0
@@ -46,6 +46,7 @@#include <linux/page-isolation.h> #include <linux/page_cgroup.h> #include <linux/debugobjects.h> +#include <linux/memleak.h> #include <asm/tlbflush.h> #include <asm/div64.h>
@@ -4570,6 +4571,8 @@ void *__init alloc_large_system_hash(const char *tablename,if (_hash_mask) *_hash_mask = (1 << log2qty) -1 ; +memleak_alloc (table, size,1 ,GFP_ATOMIC ); +return table; }
Re: [PATCH 07/15] kmemleak: Add memleak_alloc callback from alloc_large_system_hash
mm/page_alloc.c void *__init alloc_large_system_hash(const char *tablename, · line 4577
Quoted 9 lines · Catalin Marinas
mm/page_alloc.c +2
-0@@ -4570,6 +4571,8 @@ void *__init alloc_large_system_hash(const char *tablename,if (_hash_mask) *_hash_mask = (1 << log2qty) -1 ; +memleak_alloc (table, size,1 ,GFP_ATOMIC ); +return table; }
Why is this sucker GFP_ATOMIC?
Since alloc_large_system_hash() is using bootmem (and is called early), I'm a little surprised that it is OK to call into memleak_alloc() which uses kmem_cache_alloc(). Is the slab even set up at this point?
-- Dave
Re: [PATCH 07/15] kmemleak: Add memleak_alloc callback from alloc_large_system_hash
Quoted 6 lines · Dave Hansen
Quoted 5 lines · Catalin Marinas
mm/page_alloc.c +0
-0@@ -4570,6 +4571,8 @@ void *__init alloc_large_system_hash(const char *tablename,if (_hash_mask) *_hash_mask = (1 << log2qty) -1 ;
Quoted 6 lines
mm/page_alloc.c void *__init alloc_large_system_hash(const char *tablename, · line 4577
Quoted 4 lines
mm/page_alloc.c +2
-0+memleak_alloc (table, size,1 ,GFP_ATOMIC ); +return table; }Why is this sucker
GFP_ATOMIC?
It could be GFP_KERNEL, it don't think it really matter at this point.
Quoted 3 lines
Since
alloc_large_system_hash()is using bootmem (and is called early), I'm a little surprised that it is OK to call intomemleak_alloc()which useskmem_cache_alloc(). Is the slab even set up at this point?
It doesn't need to be. Early callbacks like this are logged by kmemleak in a buffer and properly registered once the slab allocator is fully initialised (slab initialisation needs to allocate some memory for itself as well).
Signature · 1 line
Catalin
Re: [PATCH 07/15] kmemleak: Add memleak_alloc callback from alloc_large_system_hash
Quoted 7 lines · Catalin Marinas
Quoted 6 lines · Dave Hansen
Quoted 5 lines · Catalin Marinas
mm/page_alloc.c +0
-0@@ -4570,6 +4571,8 @@ void *__init alloc_large_system_hash(const char *tablename,if (_hash_mask) *_hash_mask = (1 << log2qty) -1 ;
Quoted 8 lines
Quoted 6 lines
mm/page_alloc.c void *__init alloc_large_system_hash(const char *tablename, · line 4577
Quoted 4 lines
mm/page_alloc.c +2
-0+memleak_alloc (table, size,1 ,GFP_ATOMIC ); +return table; }Why is this sucker
GFP_ATOMIC?It could be
GFP_KERNEL, it don't think it really matter at this point.
Actually, for consistency is should be GFP_ATOMIC even if the flag might not be used. All the other allocations in this function (vmalloc, __get_free_pages) use GFP_ATOMIC.
Signature · 1 line
Catalin
Re: [PATCH 07/15] kmemleak: Add memleak_alloc callback from alloc_large_system_hash
In reply to Catalin MarinasQuoted 8 lines · Catalin Marinas
Quoted 3 lines
Since
alloc_large_system_hash()is using bootmem (and is called early), I'm a little surprised that it is OK to call intomemleak_alloc()which useskmem_cache_alloc(). Is the slab even set up at this point?It doesn't need to be. Early callbacks like this are logged by kmemleak in a buffer and properly registered once the slab allocator is fully initialised (slab initialisation needs to allocate some memory for itself as well).
Ahh, thanks for the clarification. Could you add something to the code to this effect?
-- Dave
Re: [PATCH 07/15] kmemleak: Add memleak_alloc callback from alloc_large_system_hash
Quoted 5 lines · Dave Hansen
Quoted 4 lines · Catalin Marinas
Quoted 3 lines
Since
alloc_large_system_hash()is using bootmem (and is called early), I'm a little surprised that it is OK to call intomemleak_alloc()which useskmem_cache_alloc(). Is the slab even set up at this point?
Quoted 7 lines
Quoted 4 lines
It doesn't need to be. Early callbacks like this are logged by kmemleak in a buffer and properly registered once the slab allocator is fully initialised (slab initialisation needs to allocate some memory for itself as well).
Ahh, thanks for the clarification. Could you add something to the code to this effect?
Do you mean a comment? I can do this.
Signature · 1 line
Catalin
Re: [PATCH 07/15] kmemleak: Add memleak_alloc callback from alloc_large_system_hash
Quoted 11 lines · Catalin Marinas
Quoted 10 lines · Dave Hansen
Quoted 8 lines · Catalin Marinas
Quoted 3 lines
Since
alloc_large_system_hash()is using bootmem (and is called early), I'm a little surprised that it is OK to call intomemleak_alloc()which useskmem_cache_alloc(). Is the slab even set up at this point?It doesn't need to be. Early callbacks like this are logged by kmemleak in a buffer and properly registered once the slab allocator is fully initialised (slab initialisation needs to allocate some memory for itself as well).
Quoted 4 lines
Quoted 2 lines
Ahh, thanks for the clarification. Could you add something to the code to this effect?
Do you mean a comment? I can do this.
Yeah, something like
/*
* kmemleak doesn't actually allocate memory when called this early
* so the GFP_ATOMIC here is actually meaningless, but consistent
* with the rest of this function.
*/
Maybe that's too verbose. :)
-- Dave
Re: [PATCH 07/15] kmemleak: Add memleak_alloc callback from alloc_large_system_hash
Quoted 1 line · Catalin Marinas
Quoted 1 line
Do you mean a comment? I can do this.
Quoted 9 lines · Dave Hansen
Yeah, something like
/*
* kmemleak doesn't actually allocate memory when called this early
* so theGFP_ATOMIChere is actually meaningless, but consistent
* with the rest of this function.
*/Maybe that's too verbose. :)
I'd suggest just doing a separate kmemleak_early_alloc() hook without the gfp flag.
Re: [PATCH 07/15] kmemleak: Add memleak_alloc callback from alloc_large_system_hash
Quoted 12 lines · Pekka Enberg
Quoted 1 line · Catalin Marinas
Quoted 1 line
Do you mean a comment? I can do this.
Quoted 8 lines · Dave Hansen
Yeah, something like
/*
* kmemleak doesn't actually allocate memory when called this early
* so theGFP_ATOMIChere is actually meaningless, but consistent
* with the rest of this function.
*/
Quoted 4 lines
Quoted 1 line
Maybe that's too verbose. :)
I'd suggest just doing a separate
kmemleak_early_alloc()hook without the gfp flag.
It looks to me like alloc_large_system_hash() could also be called at some later point and it may even invoke __vmalloc() if hashdist is set. So I would prefer not to introduce another hook and additional if's to know which one to call. BTW, I think the callback should actually be (to avoid duplicating the vmalloc call, with proper comment):
if (!hashdist) memleak_alloc(table, size, 1, GFP_ATOMIC);
Signature · 1 line
Catalin
Re: [PATCH 07/15] kmemleak: Add memleak_alloc callback from alloc_large_system_hash
Quoted 8 lines · Catalin Marinas
It looks to me like
alloc_large_system_hash()could also be called at some later point and it may even invoke__vmalloc()if hashdist is set. So I would prefer not to introduce another hook and additional if's to know which one to call. BTW, I think the callback should actually be (to avoid duplicating the vmalloc call, with proper comment):if (!hashdist) memleak_alloc(table, size, 1, GFP_ATOMIC);
Does memleak_alloc() detect if it gets called twice on the same memory? Also, is alloc_large_system_hash() contained in the tests that you can compile for kmemleak?
-- Dave
Re: [PATCH 07/15] kmemleak: Add memleak_alloc callback from alloc_large_system_hash
Quoted 11 lines · Dave Hansen
Quoted 8 lines · Catalin Marinas
It looks to me like
alloc_large_system_hash()could also be called at some later point and it may even invoke__vmalloc()if hashdist is set. So I would prefer not to introduce another hook and additional if's to know which one to call. BTW, I think the callback should actually be (to avoid duplicating the vmalloc call, with proper comment):if (!hashdist) memleak_alloc(table, size, 1, GFP_ATOMIC);Does
memleak_alloc()detect if it gets called twice on the same memory?
It does, and panics (disables itself). I think if this happens it is a kmemleak bug and some hook is missing or added twice.
Quoted 2 lines
Also, is
alloc_large_system_hash()contained in the tests that you can compile for kmemleak?
No. This memleak_alloc() callback was mainly added to avoid plenty of false reports from various parts of the kernel (especially the IPv4 stack). It wasn't really meant to track the allocated hash blocks.
Signature · 1 line
Catalin
PATCH 8/15 kmemleak: Add modules support
In reply to Catalin MarinasThis patch handles the kmemleak operations needed for modules loading so that memory allocations from inside a module are properly tracked.
--- kernel/module.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 56 insertions(+), 0 deletions(-)
kernel/module.c +56 -0
@@ -51,6 +51,7 @@#include <asm/sections.h> #include <linux/tracepoint.h> #include <linux/ftrace.h> +#include <linux/memleak.h> #if 0 #define DEBUGP printk
@@ -409,6 +410,7 @@ static void *percpu_modalloc(unsigned long size, unsigned long align,unsigned long extra;unsigned int i;void *ptr; +int cpu;if (align >PAGE_SIZE ) { printk(KERN_WARNING "%s: per-cpu alignment %li > %li\n",
@@ -438,6 +440,11 @@ static void *percpu_modalloc(unsigned long size, unsigned long align,if (!split_block (i, size))return NULL ; +/* add the per-cpu scanning areas */ +for_each_possible_cpu (cpu) +memleak_alloc (ptr +per_cpu_offset (cpu), size,0 , +GFP_KERNEL ); +/* Mark allocated */ pcpu_size[i] = -pcpu_size[i];return ptr;
@@ -452,6 +459,7 @@ static void percpu_modfree(void *freeme) {unsigned int i;void *ptr = __per_cpu_start +block_size (pcpu_size[0 ]); +int cpu;/* First entry is core kernel percpu data. */ for (i =1 ; i < pcpu_num_used; ptr +=block_size (pcpu_size[i]), i++) {
@@ -463,6 +471,10 @@ static void percpu_modfree(void *freeme)BUG (); free: +/* remove the per-cpu scanning areas */ +for_each_possible_cpu (cpu) +memleak_free (freeme +per_cpu_offset (cpu)); +/* Merge with previous? */ if (pcpu_size[i-1 ] >=0 ) { pcpu_size[i-1 ] += pcpu_size[i];
@@ -1833,6 +1845,36 @@ static void *module_alloc_update_bounds(unsigned long size)return ret; } +#ifdef CONFIG_DEBUG_MEMLEAK +static void memleak_load_module (struct module *mod,Elf_Ehdr *hdr, +Elf_Shdr *sechdrs,char *secstrings) +{ +unsigned int i; + +/* only scan the sections containing data */ +memleak_scan_area (mod->module_core, + (unsigned long )mod - (unsigned long )mod->module_core, +sizeof (struct module ),GFP_KERNEL ); + +for (i =1 ; i < hdr->e_shnum; i++) { +if (!(sechdrs[i].sh_flags &SHF_ALLOC )) +continue ; +if (strncmp (secstrings + sechdrs[i].sh_name,".data" ,5 ) !=0 + &&strncmp (secstrings + sechdrs[i].sh_name,".bss" ,4 ) !=0 ) +continue ; + +memleak_scan_area (mod->module_core, sechdrs[i].sh_addr - + (unsigned long )mod->module_core, + sechdrs[i].sh_size,GFP_KERNEL ); + } +} +#else +static inline void memleak_load_module (struct module *mod,Elf_Ehdr *hdr, +Elf_Shdr *sechdrs,char *secstrings) +{ +} +#endif +/* Allocate and load the module: note that size of section 0 is always zero, and we rely on this for optional sections. */ static noinline struct module *load_module(void __user *umod,
@@ -2011,6 +2053,12 @@ static noinline struct module *load_module(void __user *umod,/* Do the allocs. */ ptr =module_alloc_update_bounds (mod->core_size); +/* +* The pointer to this block is stored in the module structure +* which is inside the block. Just mark it as not being a +* leak. +*/ +memleak_not_leak (ptr);if (!ptr) { err = -ENOMEM ; goto free_percpu;
@@ -2019,6 +2067,13 @@ static noinline struct module *load_module(void __user *umod, mod->module_core = ptr; ptr =module_alloc_update_bounds (mod->init_size); +/* +* The pointer to this block is stored in the module structure +* which is inside the block. This block doesn't need to be +* scanned as it contains data and code that will be freed +* after the module is initialized. +*/ +memleak_ignore (ptr);if (!ptr && mod->init_size) { err = -ENOMEM ; goto free_core;
@@ -2049,6 +2104,7 @@ static noinline struct module *load_module(void __user *umod, }/* Module has been moved. */ mod = (void *)sechdrs[modindex].sh_addr; +memleak_load_module (mod, hdr, sechdrs, secstrings);/* Now we've moved module, initialize linked lists, etc. */ module_unload_init (mod);
PATCH 9/15 x86: Provide _sdata in the vmlinux_*.lds.S files
In reply to Catalin Marinas_sdata is a common symbol defined by many architectures and made available to the kernel via asm-generic/sections.h. Kmemleak uses this symbol when scanning the data sections.
--- arch/x86/kernel/vmlinux_32.lds.S | 1 + arch/x86/kernel/vmlinux_64.lds.S | 1 + 2 files changed, 2 insertions(+), 0 deletions(-)
arch/x86/kernel/vmlinux_32.lds.S +1 -0
@@ -62,6 +62,7 @@ SECTIONS /* writeable */ . = ALIGN(PAGE_SIZE); + _sdata = .; /* Start of data section */ .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ DATA_DATA CONSTRUCTORS
arch/x86/kernel/vmlinux_64.lds.S +1 -0
@@ -52,6 +52,7 @@ SECTIONS RODATA . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ + _sdata = .; /* Start of data section */ /* Data */ .data : AT(ADDR(.data) - LOAD_OFFSET) { DATA_DATA
PATCH 10/15 arm: Provide _sdata and __bss_stop in the vmlinux.lds.S file
In reply to Catalin Marinas_sdata and __bss_stop are common symbols defined by many architectures and made available to the kernel via asm-generic/sections.h. Kmemleak uses these symbols when scanning the data sections.
--- arch/arm/kernel/vmlinux.lds.S | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
arch/arm/kernel/vmlinux.lds.S +2 -0
@@ -120,6 +120,7 @@ SECTIONS .data : AT(__data_loc) { __data_start = .; /* address in memory */ + _sdata = .; /* * first, the init task union, aligned
@@ -171,6 +172,7 @@ SECTIONS __bss_start = .; /* BSS */ *(.bss) *(COMMON) + __bss_stop = .; _end = .; } /* Stabs debugging sections. */
PATCH 11/15 kmemleak: Remove some of the kmemleak false positives
In reply to Catalin MarinasThere are allocations for which the main pointer cannot be found but they are not memory leaks. This patch fixes some of them. For more information on false positives, see Documentation/kmemleak.txt.
--- drivers/char/vt.c | 7 +++++++ include/linux/percpu.h | 5 +++++ 2 files changed, 12 insertions(+), 0 deletions(-)
drivers/char/vt.c +7 -0
@@ -104,6 +104,7 @@#include <linux/io.h> #include <asm/system.h> #include <linux/uaccess.h> +#include <linux/memleak.h> #define MAX_NR_CON_DRIVER 16
@@ -2882,6 +2883,12 @@ static int __init con_init(void)*/ for (currcons =0 ; currcons <MIN_NR_CONSOLES ; currcons++) { vc_cons[currcons].d = vc =alloc_bootmem (sizeof (struct vc_data )); +/* +* Kmemleak does not track the memory allocated via +* alloc_bootmem() but this block contains pointers to +* other blocks allocated via kmalloc. +*/ +memleak_alloc (vc,sizeof (struct vc_data ),1 ,GFP_ATOMIC );INIT_WORK (&vc_cons[currcons].SAK_work, vc_SAK);visual_init (vc, currcons,1 ); vc->vc_screenbuf = (unsigned short *)alloc_bootmem (vc->vc_screenbuf_size);
include/linux/percpu.h +5 -0
@@ -69,7 +69,12 @@ struct percpu_data {void *ptrs[1 ]; }; +/* pointer disguising messes up the kmemleak objects tracking */ +#ifndef CONFIG_DEBUG_MEMLEAK #define __percpu_disguise (pdata) (struct percpu_data *)~(unsigned long)(pdata) +#else +#define __percpu_disguise (pdata) (struct percpu_data *)(pdata) +#endif /* * Use this to get to a cpu's version of the per-cpu object dynamically * allocated. Non-atomic access to the current CPU's version should
PATCH 12/15 kmemleak: Enable the building of the memory leak detector
In reply to Catalin MarinasThis patch adds the Kconfig.debug and Makefile entries needed for building kmemleak into the kernel.
--- lib/Kconfig.debug | 23 +++++++++++++++++++++++ mm/Makefile | 1 + 2 files changed, 24 insertions(+), 0 deletions(-)
lib/Kconfig.debug +23 -0
@@ -290,6 +290,29 @@ config SLUB_STATS out which slabs are relevant to a particular load. Try running: slabinfo -DA +config DEBUG_MEMLEAK + bool "Kernel memory leak detector" + default n + depends on EXPERIMENTAL + select DEBUG_SLAB if SLAB + select SLUB_DEBUG if SLUB + select DEBUG_FS + select STACKTRACE + select FRAME_POINTER + select KALLSYMS + help + Say Y here if you want to enable the memory leak + detector. The memory allocation/freeing is traced in a way + similar to the Boehm's conservative garbage collector, the + difference being that the orphan objects are not freed but + only shown in /sys/kernel/debug/memleak. Enabling this + feature will introduce an overhead to memory + allocations. See Documentation/kmemleak.txt for more + details. + + In order to access the memleak file, debugfs needs to be + mounted (usually at /sys/kernel/debug). + config DEBUG_PREEMPT bool "Debug preemptible kernel" depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64)
mm/Makefile +1 -0
@@ -34,3 +34,4 @@ obj-$(CONFIG_MIGRATION) += migrate.o obj-$(CONFIG_SMP) += allocpercpu.o obj-$(CONFIG_QUICKLIST) += quicklist.o obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o +obj-$(CONFIG_DEBUG_MEMLEAK) += memleak.o
Re: [PATCH 12/15] kmemleak: Enable the building of the memory leak detector
lib/Kconfig.debug config SLUB_STATS · line 302
Quoted 10 lines · Catalin Marinas
lib/Kconfig.debug +10
-0+config DEBUG_MEMLEAK + bool "Kernel memory leak detector" + default n + depends on EXPERIMENTAL + select DEBUG_SLAB if SLAB + select SLUB_DEBUG if SLUB + select DEBUG_FS + select STACKTRACE + select FRAME_POINTER + select KALLSYMS
So, not all architectures have STACKTRACE or FRAME_POINTER. I think a few of these should at least be done with depends.
Is this feature accessible if DEBUG_FS=n? It seems to compile OK, but I wonder if it is useful.
-- Dave
Re: [PATCH 12/15] kmemleak: Enable the building of the memory leak detector
Quoted 12 lines · Dave Hansen
lib/Kconfig.debug config SLUB_STATS · line 302
Quoted 10 lines · Catalin Marinas
lib/Kconfig.debug +10
-0+config DEBUG_MEMLEAK + bool "Kernel memory leak detector" + default n + depends on EXPERIMENTAL + select DEBUG_SLAB if SLAB + select SLUB_DEBUG if SLUB + select DEBUG_FS + select STACKTRACE + select FRAME_POINTER + select KALLSYMS
Quoted 2 lines
So, not all architectures have STACKTRACE or
FRAME_POINTER. I think a few of these should at least be done with depends.
I think it could depend on STACKTRACE_SUPPORT. Alternatively, it could select STACKTRACE only if it is supported, though for architectures without it, the kmemleak reports wouldn't be very useful.
Does FRAME_POINTER even matter? I think STACKTRACE should be enough to get the backtrace. I even have some ARM patches for stack unwinding where FRAME_POINTER is disabled (and shouldn't be enabled).
Quoted 2 lines
Is this feature accessible if DEBUG_FS=n? It seems to compile OK, but I wonder if it is useful.
Well, it is recommended. If you don't have this, you can't trigger a scan manually by reading the /sys/kernel/debug/memleak file (have to rely on the automatic thread). In my local tree (not published yet), I also added support for run-time configuration by writing to this file. Is there any disadvantage in always selecting DEBUG_FS?
Thanks.
Signature · 1 line
Catalin
Re: [PATCH 12/15] kmemleak: Enable the building of the memory leak detector
Quoted 13 lines · Catalin Marinas
Quoted 12 lines · Dave Hansen
Quoted 10 lines · Catalin Marinas
lib/Kconfig.debug +10
-0+config DEBUG_MEMLEAK + bool "Kernel memory leak detector" + default n + depends on EXPERIMENTAL + select DEBUG_SLAB if SLAB + select SLUB_DEBUG if SLUB + select DEBUG_FS + select STACKTRACE + select FRAME_POINTER + select KALLSYMS
Quoted 6 lines
Quoted 2 lines
So, not all architectures have STACKTRACE or
FRAME_POINTER. I think a few of these should at least be done with depends.I think it could depend on
STACKTRACE_SUPPORT. Alternatively, it could select STACKTRACE only if it is supported, though for architectures without it, the kmemleak reports wouldn't be very useful.
I think they'd still be pretty useful. They would be certainly harder to track down, but "something allocating N bytes from the slab is leaking" is certainly better than nothing.
Quoted 3 lines
Does
FRAME_POINTEReven matter? I think STACKTRACE should be enough to get the backtrace. I even have some ARM patches for stack unwinding whereFRAME_POINTERis disabled (and shouldn't be enabled).
It is supposed to give cleaner stack traces. But if you don't strictly require it, I'd leave it up to whatever the user had set before. If people are getting crappy stack traces from anywhere in the kernel, I think they know where to go to fix it. ;)
Quoted 8 lines
Quoted 2 lines
Is this feature accessible if DEBUG_FS=n? It seems to compile OK, but I wonder if it is useful.
Well, it is recommended. If you don't have this, you can't trigger a scan manually by reading the
/sys/kernel/debug/memleakfile (have to rely on the automatic thread). In my local tree (not published yet), I also added support for run-time configuration by writing to this file. Is there any disadvantage in always selectingDEBUG_FS?
I was just worried that debugfs was the only mechanism for this feature to get its data in and out of the kernel. If it was not there, that this feature was useless.
The problem with 'select' when it is "mixed" with 'depends':
config DEBUG_FS
bool "Debug Filesystem"
depends on SYSFS
When you 'select DEBUG_FS' it will *not* turn on SYSFS:
$ egrep 'DEBUG_FS|MEMLEAK|G_SYSFS' .config # CONFIG_SYSFS is not set CONFIG_DEBUG_FS=y CONFIG_DEBUG_MEMLEAK=y CONFIG_DEBUG_MEMLEAK_TEST=y
I also tried compiling your feature with a bunch of things turned off in my .config: http://sr71.net/~dave/linux/kmemleak.config
I got a compile error:
/home/dave/work/temp/linux-2.6/mm/memleak-test.c: In function ‘memleak_test_init’:/home/dave/work/temp/linux-2.6/mm/memleak-test.c:61: error: ‘files_cachep’ undeclared (first use in this function) /home/dave/work/temp/linux-2.6/mm/memleak-test.c:61: error: (Each undeclared identifier is reported only once /home/dave/work/temp/linux-2.6/mm/memleak-test.c:61: error: for each function it appears in.)
make allnoconfig is cool. :)
-- Dave
PATCH 13/15 kmemleak: Keep the __init functions after initialization
In reply to Catalin MarinasThis patch adds the CONFIG_DEBUG_KEEP_INIT option which preserves the .init.* sections after initialization. Memory leaks happening during this phase can be more easily tracked.
--- include/linux/init.h | 6 ++++++ lib/Kconfig.debug | 12 ++++++++++++ 2 files changed, 18 insertions(+), 0 deletions(-)
include/linux/init.h +6 -0
@@ -40,9 +40,15 @@/* These are for everybody (although not all archs will actually discard it in modules) */ +#ifdef CONFIG_DEBUG_KEEP_INIT +#define __init +#define __initdata +#define __initconst +#else #define __init __section(.init.text) __cold notrace#define __initdata __section(.init.data)#define __initconst __section(.init.rodata) +#endif #define __exitdata __section(.exit.data)#define __exit_call __used __section(.exitcall.exit)
lib/Kconfig.debug +12 -0
@@ -313,6 +313,18 @@ config DEBUG_MEMLEAK In order to access the memleak file, debugfs needs to be mounted (usually at /sys/kernel/debug). +config DEBUG_KEEP_INIT + bool "Do not free the __init code/data" + default n + depends on DEBUG_MEMLEAK + help + This option moves the __init code/data out of the + .init.text/.init.data sections. It is useful for identifying + memory leaks happening during the kernel or modules + initialization. + + If unsure, say N. + config DEBUG_PREEMPT bool "Debug preemptible kernel" depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64)
Re: [PATCH 13/15] kmemleak: Keep the __init functions after initialization
Quoted 3 lines · Catalin Marinas
This patch adds the
CONFIG_DEBUG_KEEP_INIToption which preserves the .init.* sections after initialization. Memory leaks happening during this phase can be more easily tracked.
This patch manipulate the section names of these functions. The better way would be to keep the section names as they are and then in init.h decide where to add these sections.
This will require a new set of CONFIG_ symbols but then it is obvious what happens.
Something like:
config KEEP_INIT
bool
config KMEMLEAK
... select KEEP_INIT select DEBUG_KEEP_CPUINIT select DEBUG_KEEP_MEMINIT
config HOTPLUG
... select KEEP_INIT
And then use these symbols in vmlinux.lds.h
Sam
Re: [PATCH 13/15] kmemleak: Keep the __init functions after initialization
Sam,
Quoted 11 lines · Sam Ravnborg
Quoted 3 lines · Catalin Marinas
This patch adds the
CONFIG_DEBUG_KEEP_INIToption which preserves the .init.* sections after initialization. Memory leaks happening during this phase can be more easily tracked.This patch manipulate the section names of these functions. The better way would be to keep the section names as they are and then in
init.hdecide where to add these sections.This will require a new set of
CONFIG_symbols but then it is obvious what happens.
Thanks for your comments. I had a look at the vmlinux.lds.h file and there are indeed better options like DEV_KEEP etc.
Anyway, I think I'll drop this patch completely. All that kmemleak needs is actually the kernel symbols to be able to print the stack trace. These don't seem to be removed together with the .init sections cleanup.
Signature · 1 line
Catalin
PATCH 14/15 kmemleak: Simple testing module for kmemleak
In reply to Catalin MarinasThis patch adds a loadable module that deliberately leaks memory. It is used for testing various memory leaking scenarios.
--- lib/Kconfig.debug | 11 +++++ mm/Makefile | 1 mm/memleak-test.c | 110 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 122 insertions(+), 0 deletions(-) create mode 100644 mm/memleak-test.c
lib/Kconfig.debug +11 -0
@@ -313,6 +313,17 @@ config DEBUG_MEMLEAK In order to access the memleak file, debugfs needs to be mounted (usually at /sys/kernel/debug). +config DEBUG_MEMLEAK_TEST + tristate "Test the kernel memory leak detector" + default n + depends on DEBUG_MEMLEAK + help + Say Y or M here to build a test for the kernel memory leak + detector. This option enables a module that explicitly leaks + memory. + + If unsure, say N. + config DEBUG_KEEP_INIT bool "Do not free the __init code/data" default n
mm/Makefile +1 -0
@@ -35,3 +35,4 @@ obj-$(CONFIG_SMP) += allocpercpu.o obj-$(CONFIG_QUICKLIST) += quicklist.o obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o obj-$(CONFIG_DEBUG_MEMLEAK) += memleak.o +obj-$(CONFIG_DEBUG_MEMLEAK_TEST) += memleak-test.o
mm/memleak-test.c new file +110 -0
110 lines not on this page · raw message
PATCH 15/15 kmemleak: Add the corresponding MAINTAINERS entry
In reply to Catalin Marinas--- MAINTAINERS | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
MAINTAINERS +6 -0
@@ -2503,6 +2503,12 @@ L: [email protected] W: http://www.kerneljanitors.org/ S: Maintained +KERNEL MEMORY LEAK DETECTOR +P: Catalin Marinas +M: [email protected] +L: [email protected] +S: Maintained + KERNEL NFSD, SUNRPC, AND LOCKD SERVERS P: J. Bruce Fields M: [email protected]
Quoted 4 lines · Catalin Marinas
A new kmemleak version is available. Thanks to all who reviewed the code and gave feedback. Kmemleak can also be found on this git tree:
git://linux-arm.org/linux-2.6.gitkmemleak
[...]
Quoted 1 line
Changes since the previous release:
Something I forgot to mention here - I dropped the mem_map array scanning since it doesn't work in all the kernel configurations and, as Andrew Morton pointed out, it goes too deep into the kernel structures. I didn't see any false positives on ARM but it may need more testing.
Signature · 1 line
Catalin