Skip to contentSkip to conversation

Some speed improvements to U-Boot JFFS2 code (updated)

RFC PATCH New Ilya Yanok 5 participants 22 messages Nov 13, 2008 – Dec 16, 2008 Journalling flash file system V2 (JFFS2)

lore
Share & tools
lore

Ilya Yanok

author
#0 lore raw

cover Some speed improvements to U-Boot JFFS2 code (updated)

Hello everybody,

here is a set of changes we made to improve U-Boot JFFS2 code performance. We still can't reach Linux's performance but improvements are significant.

Patches are againt current u-boot git tree.

Any comments are welcome.

Regards, Ilya.

author
#1 lore raw

PATCH 1/6 jffs2: fix searching for latest version in jffs2_1pass_list_inodes()

We need to update i_version inside cycle to find really latest version inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside dump_inode() instead of calling expensive jffs2_1pass_read_inode().

---
 fs/jffs2/jffs2_1pass.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)
fs/jffs2/jffs2_1pass.c +2 -3
index 920d2fd..35743fc 100644
@@ -940,9 +940,7 @@ static inline u32 dump_inode(struct b_lists * pL, struct jffs2_raw_dirent *d, st
 	st.st_mtime = i->mtime;
 	st.st_mode = i->mode;
 	st.st_ino = i->ino;
-
-	/* neither dsize nor isize help us.. do it the long way */
-	st.st_size = jffs2_1pass_read_inode(pL, i->ino, NULL);
+	st.st_size = i->isize;
 
 	dump_stat(&st, fname);
 
@@ -976,6 +974,7 @@ jffs2_1pass_list_inodes(struct b_lists * pL, u32 pino)
 				jNode = (struct jffs2_raw_inode *)
 					get_fl_mem(b2->offset, sizeof(ojNode), &ojNode);
 				if (jNode->ino == jDir->ino && jNode->version >= i_version) {
+					i_version = jNode->version;
 					if (i)
 						put_fl_mem(i);
 
Signature · 1 line
1.5.6.1
#2 lore raw

PATCH 1/6 jffs2: fix searching for latest version in jffs2_1pass_list_inodes()

Dear Ilya Yanok,

Quoted 9 lines · In message <[email protected]> you wrote:

We need to update i_version inside cycle to find really latest version inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside dump_inode() instead of calling expensive jffs2_1pass_read_inode().

---
 fs/jffs2/jffs2_1pass.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Testing can show the presense of bugs, but not their absence.
                                                   -- Edsger Dijkstra
author
#3 lore raw

PATCH 2/6 jffs2: add sector_size field to part_info structure

In reply to Ilya Yanok

This patch adds sector_size field to part_info structure (used by new JFFS2 code).

---
 common/cmd_jffs2.c          |   20 +++++++++++++++++---
 include/jffs2/load_kernel.h |    1 +
 2 files changed, 18 insertions(+), 3 deletions(-)
common/cmd_jffs2.c +17 -3
index 791a572..e2bf198 100644
@@ -339,11 +339,15 @@ static int part_validate_nor(struct mtdids *id, struct part_info *part)
 	extern flash_info_t flash_info[];
 	flash_info_t *flash;
 	int offset_aligned;
-	u32 end_offset;
+	u32 end_offset, sector_size = 0;
 	int i;
 
 	flash = &flash_info[id->num];
 
+	/* size of last sector */
+	part->sector_size = flash->size -
+		(flash->start[flash->sector_count-1] - flash->start[0]);
+
 	offset_aligned = 0;
 	for (i = 0; i < flash->sector_count; i++) {
 		if ((flash->start[i] - flash->start[0]) == part->offset) {
@@ -358,12 +362,18 @@ static int part_validate_nor(struct mtdids *id, struct part_info *part)
 	}
 
 	end_offset = part->offset + part->size;
+	offset_aligned = 0;
 	for (i = 0; i < flash->sector_count; i++) {
+		if (i) {
+			sector_size = flash->start[i] - flash->start[i-1];
+			if (part->sector_size < sector_size)
+				part->sector_size = sector_size;
+		}
 		if ((flash->start[i] - flash->start[0]) == end_offset)
-			return 0;
+			offset_aligned = 1;
 	}
 
-	if (flash->size == end_offset)
+	if (offset_aligned || flash->size == end_offset)
 		return 0;
 
 	printf("%s%d: partition (%s) size alignment incorrect\n",
@@ -389,6 +399,8 @@ static int part_validate_nand(struct mtdids *id, struct part_info *part)
 
 	nand = &nand_info[id->num];
 
+	part->sector_size = nand->erasesize;
+
 	if ((unsigned long)(part->offset) % nand->erasesize) {
 		printf("%s%d: partition (%s) start offset alignment incorrect\n",
 				MTD_DEV_TYPE(id->type), id->num, part->name);
@@ -424,6 +436,8 @@ static int part_validate_onenand(struct mtdids *id, struct part_info *part)
 
 	mtd = &onenand_mtd;
 
+	part->sector_size = mtd->erasesize;
+
 	if ((unsigned long)(part->offset) % mtd->erasesize) {
 		printf("%s%d: partition (%s) start offset"
 			"alignment incorrect\n",
include/jffs2/load_kernel.h +1 -0
index 551fd0c..c0442a2 100644
@@ -50,6 +50,7 @@ struct part_info {
 	u32 offset;			/* offset within device */
 	void *jffs2_priv;		/* used internaly by jffs2 */
 	u32 mask_flags;			/* kernel MTD mask flags */
+	u32 sector_size;		/* size of sector */
 	struct mtd_device *dev;		/* parent device */
 };
 
Signature · 1 line
1.5.6.1
#4 lore raw

PATCH 2/6 jffs2: add sector_size field to part_info structure

Quoted 14 lines · Ilya Yanok

This patch adds sector_size field to part_info structure (used by new JFFS2 code).

---
 common/cmd_jffs2.c          |   20 +++++++++++++++++---
 include/jffs2/load_kernel.h |    1 +
 2 files changed, 18 insertions(+), 3 deletions(-)
common/cmd_jffs2.c +0 -0
index 791a572..e2bf198 100644

common/cmd_jffs2.c static int part_validate_nor(struct mtdids *id, struct part_info *part) · line 342

Quoted 5 lines
common/cmd_jffs2.c +1 -1
@@ -339,11 +339,15 @@ static int part_validate_nor(struct mtdids *id, struct part_info *part)
 	extern flash_info_t flash_info[];
 	flash_info_t *flash;
 	int offset_aligned;
-	u32 end_offset;
+	u32 end_offset, sector_size = 0;

please spit in two lines

Best Regards,
J.

#5 lore raw

PATCH 2/6 jffs2: add sector_size field to part_info structure

Quoted 11 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 9 lines · Ilya Yanok

This patch adds sector_size field to part_info structure (used by new JFFS2 code).

---
 common/cmd_jffs2.c          |   20 +++++++++++++++++---
 include/jffs2/load_kernel.h |    1 +
 2 files changed, 18 insertions(+), 3 deletions(-)
Quoted 13 lines

common/cmd_jffs2.c static int part_validate_nor(struct mtdids *id, struct part_info *part) · line 343

Quoted 11 lines
common/cmd_jffs2.c +1 -1
index 791a572..e2bf198 100644
@@ -339,11 +339,15 @@ static int part_validate_nor(struct mtdids *id, struct part_info *part)
 	extern flash_info_t flash_info[];
 	flash_info_t *flash;
 	int offset_aligned;
-	u32 end_offset;
+	u32 end_offset, sector_size = 0;
 

please spit in two lines

Why do you waste peoples' time with this pedantic nit-picking? There's absolutely nothing wrong with having them both on the same line, especially if it's the only thing you can object to in the patch.

regards,
Ben

#6 lore raw

PATCH 2/6 jffs2: add sector_size field to part_info structure

In reply to Ilya Yanok

Dear Ilya Yanok,

Quoted 8 lines · In message <[email protected]> you wrote:

This patch adds sector_size field to part_info structure (used by new JFFS2 code).

---
 common/cmd_jffs2.c          |   20 +++++++++++++++++---
 include/jffs2/load_kernel.h |    1 +
 2 files changed, 18 insertions(+), 3 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
They say a little knowledge is a dangerous thing,  but it is not  one
half so bad as a lot of ignorance.   - Terry Pratchett, _Equal Rites_
author
#7 lore raw

PATCH 3/6 jffs2: rewrite jffs2 scanning code based on Linux one

In reply to Ilya Yanok

Rewrites jffs2_1pass_build_lists() function in style of Linux's jffs2_scan_medium() and jffs2_scan_eraseblock().
This includes:
- Caching flash acceses
- Smart dealing with free space

---
 fs/jffs2/jffs2_1pass.c |  227 ++++++++++++++++++++++++++++++++++++------------
 1 files changed, 171 insertions(+), 56 deletions(-)
fs/jffs2/jffs2_1pass.c +171 -56
index 35743fc..30a6dba 100644
@@ -389,6 +389,12 @@ static inline void *get_fl_mem_nor(u32 off)
 	return (void*)addr;
 }
 
+static inline void *get_fl_mem_nor_copy(u32 off, u32 size, void *ext_buf)
+{
+	memcpy(ext_buf, get_fl_mem_nor(off), size);
+	return ext_buf;
+}
+
 static inline void *get_node_mem_nor(u32 off)
 {
 	return (void*)get_fl_mem_nor(off);
@@ -405,8 +411,11 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
 	struct mtdids *id = current_part->dev->id;
 
 #if defined(CONFIG_CMD_FLASH)
-	if (id->type == MTD_DEV_TYPE_NOR)
+	if (id->type == MTD_DEV_TYPE_NOR) {
+		if (ext_buf)
+			return get_fl_mem_nor_copy(off, size, ext_buf);
 		return get_fl_mem_nor(off);
+	}
 #endif
 
 #if defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)
@@ -478,9 +487,6 @@ static char *compr_names[] = {
 #endif
 };
 
-/* Spinning wheel */
-static char spinner[] = { '|', '/', '-', '\\' };
-
 /* Memory management */
 struct mem_block {
 	u32	index;
@@ -651,23 +657,6 @@ static int compare_dirents(struct b_node *new, struct b_node *old)
 }
 #endif
 
-static u32
-jffs2_scan_empty(u32 start_offset, struct part_info *part)
-{
-	char *max = (char *)(part->offset + part->size - sizeof(struct jffs2_raw_inode));
-	char *offset = (char *)(part->offset + start_offset);
-	u32 off;
-
-	while (offset < max &&
-	       *(u32*)get_fl_mem((u32)offset, sizeof(u32), &off) == 0xFFFFFFFF) {
-		offset += sizeof(u32);
-		/* return if spinning is due */
-		if (((u32)offset & ((1 << SPIN_BLKSIZE)-1)) == 0) break;
-	}
-
-	return (u32)offset - part->offset;
-}
-
 void
 jffs2_free_cache(struct part_info *part)
 {
@@ -766,6 +755,10 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 					put_fl_mem(jNode);
 					continue;
 				}
+				if (!data_crc(jNode)) {
+					put_fl_mem(jNode);
+					continue;
+				}
 
 				lDest = (uchar *) (dest + jNode->offset);
 #if 0
@@ -1268,17 +1261,33 @@ dump_dirents(struct b_lists *pL)
 }
 #endif
 
+#define min_t(type, x, y) ({                    \
+	type __min1 = (x);                      \
+	type __min2 = (y);                      \
+	__min1 < __min2 ? __min1: __min2; })
+
+#define DEFAULT_EMPTY_SCAN_SIZE	4096
+
+static inline uint32_t EMPTY_SCAN_SIZE(uint32_t sector_size)
+{
+	if (sector_size < DEFAULT_EMPTY_SCAN_SIZE)
+		return sector_size;
+	else
+		return DEFAULT_EMPTY_SCAN_SIZE;
+}
+
 static u32
 jffs2_1pass_build_lists(struct part_info * part)
 {
 	struct b_lists *pL;
 	struct jffs2_unknown_node *node;
-	u32 offset, oldoffset = 0;
-	u32 max = part->size - sizeof(struct jffs2_raw_inode);
-	u32 counter = 0;
+	u32 nr_sectors = part->size/part->sector_size;
+	u32 i;
 	u32 counter4 = 0;
 	u32 counterF = 0;
 	u32 counterN = 0;
+	u32 buf_size = DEFAULT_EMPTY_SCAN_SIZE;
+	char *buf;
 
 	/* turn off the lcd.  Refreshing the lcd adds 50% overhead to the */
 	/* jffs2 list building enterprise nope.  in newer versions the overhead is */
@@ -1288,70 +1297,176 @@ jffs2_1pass_build_lists(struct part_info * part)
 	/* if we are building a list we need to refresh the cache. */
 	jffs_init_1pass_list(part);
 	pL = (struct b_lists *)part->jffs2_priv;
-	offset = 0;
+	buf = malloc(buf_size);
 	puts ("Scanning JFFS2 FS:   ");
 
 	/* start at the beginning of the partition */
-	while (offset < max) {
-		if ((oldoffset >> SPIN_BLKSIZE) != (offset >> SPIN_BLKSIZE)) {
-			printf("\b\b%c ", spinner[counter++ % sizeof(spinner)]);
-			oldoffset = offset;
-		}
+	for (i = 0; i < nr_sectors; i++) {
+		uint32_t sector_ofs = i * part->sector_size;
+		uint32_t buf_ofs = sector_ofs;
+		uint32_t buf_len = EMPTY_SCAN_SIZE(part->sector_size);
+		uint32_t ofs, prevofs;
 
 		WATCHDOG_RESET();
+		get_fl_mem((u32)part->offset + buf_ofs, buf_len, buf);
 
-		node = (struct jffs2_unknown_node *) get_node_mem((u32)part->offset + offset);
-		if (node->magic == JFFS2_MAGIC_BITMASK && hdr_crc(node)) {
+		/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+		ofs = 0;
+
+		/* Scan only 4KiB of 0xFF before declaring it's empty */
+		while (ofs < EMPTY_SCAN_SIZE(part->sector_size) &&
+				*(uint32_t *)(&buf[ofs]) == 0xFFFFFFFF)
+			ofs += 4;
+
+		if (ofs == EMPTY_SCAN_SIZE(part->sector_size))
+			continue;
+
+		ofs += sector_ofs;
+		prevofs = ofs - 1;
+
+	scan_more:
+		while (ofs < sector_ofs + part->sector_size) {
+			if (ofs == prevofs) {
+				printf("offset %08x already seen, skip\n", ofs);
+				ofs += 4;
+				counter4++;
+				continue;
+			}
+			prevofs = ofs;
+			if (sector_ofs + part->sector_size <
+					ofs + sizeof(*node))
+				break;
+			if (buf_ofs + buf_len < ofs + sizeof(*node)) {
+				buf_len = min_t(uint32_t, buf_size, sector_ofs
+						+ part->sector_size - ofs);
+				get_fl_mem((u32)part->offset + ofs, buf_len,
+					   buf);
+				buf_ofs = ofs;
+			}
+
+			node = (struct jffs2_unknown_node *)&buf[ofs-buf_ofs];
+
+			if (*(uint32_t *)(&buf[ofs-buf_ofs]) == 0xffffffff) {
+				uint32_t inbuf_ofs;
+				uint32_t empty_start, scan_end;
+
+				empty_start = ofs;
+				ofs += 4;
+				scan_end = min_t(uint32_t, EMPTY_SCAN_SIZE(
+							part->sector_size)/8,
+							buf_len);
+			more_empty:
+				inbuf_ofs = ofs - buf_ofs;
+				while (inbuf_ofs < scan_end) {
+					if (*(uint32_t *)(&buf[inbuf_ofs]) !=
+							0xffffffff)
+						goto scan_more;
+
+					inbuf_ofs += 4;
+					ofs += 4;
+				}
+				/* Ran off end. */
+
+				/* See how much more there is to read in this
+				 * eraseblock...
+				 */
+				buf_len = min_t(uint32_t, buf_size,
+						sector_ofs +
+						part->sector_size - ofs);
+				if (!buf_len) {
+					/* No more to read. Break out of main
+					 * loop without marking this range of
+					 * empty space as dirty (because it's
+					 * not)
+					 */
+					break;
+				}
+				scan_end = buf_len;
+				get_fl_mem((u32)part->offset + ofs, buf_len,
+					   buf);
+				buf_ofs = ofs;
+				goto more_empty;
+			}
+			if (node->magic != JFFS2_MAGIC_BITMASK ||
+					!hdr_crc(node)) {
+				ofs += 4;
+				counter4++;
+				continue;
+			}
+			if (ofs + node->totlen >
+					sector_ofs + part->sector_size) {
+				ofs += 4;
+				counter4++;
+				continue;
+			}
 			/* if its a fragment add it */
-			if (node->nodetype == JFFS2_NODETYPE_INODE &&
-				    inode_crc((struct jffs2_raw_inode *) node) &&
-				    data_crc((struct jffs2_raw_inode *) node)) {
+			switch (node->nodetype) {
+			case JFFS2_NODETYPE_INODE:
+				if (buf_ofs + buf_len < ofs + sizeof(struct
+							jffs2_raw_inode)) {
+					get_fl_mem((u32)part->offset + ofs,
+						   buf_len, buf);
+					buf_ofs = ofs;
+					node = (void *)buf;
+				}
+				if (!inode_crc((struct jffs2_raw_inode *) node))
+				       break;
+
 				if (insert_node(&pL->frag, (u32) part->offset +
-						offset) == NULL) {
-					put_fl_mem(node);
+						ofs) == NULL)
 					return 0;
+				break;
+			case JFFS2_NODETYPE_DIRENT:
+				if (buf_ofs + buf_len < ofs + sizeof(struct
+							jffs2_raw_dirent) +
+							((struct
+							 jffs2_raw_dirent *)
+							node)->nsize) {
+					get_fl_mem((u32)part->offset + ofs,
+						   buf_len, buf);
+					buf_ofs = ofs;
+					node = (void *)buf;
 				}
-			} else if (node->nodetype == JFFS2_NODETYPE_DIRENT &&
-				   dirent_crc((struct jffs2_raw_dirent *) node)  &&
-				   dirent_name_crc((struct jffs2_raw_dirent *) node)) {
+
+				if (!dirent_crc((struct jffs2_raw_dirent *)
+							node) ||
+						!dirent_name_crc(
+							(struct
+							 jffs2_raw_dirent *)
+							node))
+					break;
 				if (! (counterN%100))
 					puts ("\b\b.  ");
 				if (insert_node(&pL->dir, (u32) part->offset +
-						offset) == NULL) {
-					put_fl_mem(node);
+						ofs) == NULL)
 					return 0;
-				}
 				counterN++;
-			} else if (node->nodetype == JFFS2_NODETYPE_CLEANMARKER) {
+				break;
+			case JFFS2_NODETYPE_CLEANMARKER:
 				if (node->totlen != sizeof(struct jffs2_unknown_node))
 					printf("OOPS Cleanmarker has bad size "
 						"%d != %zu\n",
 						node->totlen,
 						sizeof(struct jffs2_unknown_node));
-			} else if (node->nodetype == JFFS2_NODETYPE_PADDING) {
+				break;
+			case JFFS2_NODETYPE_PADDING:
 				if (node->totlen < sizeof(struct jffs2_unknown_node))
 					printf("OOPS Padding has bad size "
 						"%d < %zu\n",
 						node->totlen,
 						sizeof(struct jffs2_unknown_node));
-			} else {
+				break;
+			default:
 				printf("Unknown node type: %x len %d offset 0x%x\n",
 					node->nodetype,
-					node->totlen, offset);
+					node->totlen, ofs);
 			}
-			offset += ((node->totlen + 3) & ~3);
+			ofs += ((node->totlen + 3) & ~3);
 			counterF++;
-		} else if (node->magic == JFFS2_EMPTY_BITMASK &&
-			   node->nodetype == JFFS2_EMPTY_BITMASK) {
-			offset = jffs2_scan_empty(offset, part);
-		} else {	/* if we know nothing, we just step and look. */
-			offset += 4;
-			counter4++;
 		}
-/*             printf("unknown node magic %4.4x %4.4x @ %lx\n", node->magic, node->nodetype, (unsigned long)node); */
-		put_fl_mem(node);
 	}
 
+	free(buf);
 	putstr("\b\b done.\r\n");		/* close off the dots */
 	/* turn the lcd back on. */
 	/* splash(); */
Signature · 1 line
1.5.6.1
#8 lore raw

PATCH 3/6 jffs2: rewrite jffs2 scanning code based on Linux one

Quoted 14 lines
fs/jffs2/jffs2_1pass.c +5 -5
 	/* start at the beginning of the partition */
-	while (offset < max) {
-		if ((oldoffset >> SPIN_BLKSIZE) != (offset >> SPIN_BLKSIZE)) {
-			printf("\b\b%c ", spinner[counter++ % sizeof(spinner)]);
-			oldoffset = offset;
-		}
+	for (i = 0; i < nr_sectors; i++) {
+		uint32_t sector_ofs = i * part->sector_size;
+		uint32_t buf_ofs = sector_ofs;
+		uint32_t buf_len = EMPTY_SCAN_SIZE(part->sector_size);
+		uint32_t ofs, prevofs;
 
 		WATCHDOG_RESET();

fs/jffs2/jffs2_1pass.c jffs2_1pass_build_lists(struct part_info * part) · line 1318

Quoted 10 lines
fs/jffs2/jffs2_1pass.c +7 -2
+		get_fl_mem((u32)part->offset + buf_ofs, buf_len, buf);
 
-		node = (struct jffs2_unknown_node *) get_node_mem((u32)part->offset + offset);
-		if (node->magic == JFFS2_MAGIC_BITMASK && hdr_crc(node)) {
+		/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+		ofs = 0;
+
+		/* Scan only 4KiB of 0xFF before declaring it's empty */
+		while (ofs < EMPTY_SCAN_SIZE(part->sector_size) &&
+				*(uint32_t *)(&buf[ofs]) == 0xFFFFFFFF)

please use readx/writex

Quoted 21 lines
fs/jffs2/jffs2_1pass.c +21 -0
+			ofs += 4;
+
+		if (ofs == EMPTY_SCAN_SIZE(part->sector_size))
+			continue;
+
+		ofs += sector_ofs;
+		prevofs = ofs - 1;
+
+	scan_more:
+		while (ofs < sector_ofs + part->sector_size) {
+			if (ofs == prevofs) {
+				printf("offset %08x already seen, skip\n", ofs);
+				ofs += 4;
+				counter4++;
+				continue;
+			}
+			prevofs = ofs;
+			if (sector_ofs + part->sector_size <
+					ofs + sizeof(*node))
+				break;
+			if (buf_ofs + buf_len < ofs + sizeof(*node)) {

fs/jffs2/jffs2_1pass.c jffs2_1pass_build_lists(struct part_info * part) · line 1349

Quoted 10 lines
fs/jffs2/jffs2_1pass.c +10 -0
+				buf_len = min_t(uint32_t, buf_size, sector_ofs
+						+ part->sector_size - ofs);
+				get_fl_mem((u32)part->offset + ofs, buf_len,
+					   buf);
+				buf_ofs = ofs;
+			}
+
+			node = (struct jffs2_unknown_node *)&buf[ofs-buf_ofs];
+
+			if (*(uint32_t *)(&buf[ofs-buf_ofs]) == 0xffffffff) {

please use readx/writex

fs/jffs2/jffs2_1pass.c jffs2_1pass_build_lists(struct part_info * part) · line 1362

Quoted 13 lines
fs/jffs2/jffs2_1pass.c +13 -0
+				uint32_t inbuf_ofs;
+				uint32_t empty_start, scan_end;
+
+				empty_start = ofs;
+				ofs += 4;
+				scan_end = min_t(uint32_t, EMPTY_SCAN_SIZE(
+							part->sector_size)/8,
+							buf_len);
+			more_empty:
+				inbuf_ofs = ofs - buf_ofs;
+				while (inbuf_ofs < scan_end) {
+					if (*(uint32_t *)(&buf[inbuf_ofs]) !=
+							0xffffffff)

please use readx/writex and so on

Best Regards,
J.

author
#9 lore raw

PATCH 3/6 jffs2: rewrite jffs2 scanning code based on Linux one

Hello Jean-Christophe,

Quoted 16 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 16 lines
fs/jffs2/jffs2_1pass.c +6 -5
 	/* start at the beginning of the partition */
-	while (offset < max) {
-		if ((oldoffset >> SPIN_BLKSIZE) != (offset >> SPIN_BLKSIZE)) {
-			printf("\b\b%c ", spinner[counter++ % sizeof(spinner)]);
-			oldoffset = offset;
-		}
+	for (i = 0; i < nr_sectors; i++) {
+		uint32_t sector_ofs = i * part->sector_size;
+		uint32_t buf_ofs = sector_ofs;
+		uint32_t buf_len = EMPTY_SCAN_SIZE(part->sector_size);
+		uint32_t ofs, prevofs;
 
 		WATCHDOG_RESET();
+		get_fl_mem((u32)part->offset + buf_ofs, buf_len, buf);
Quoted 11 lines

fs/jffs2/jffs2_1pass.c jffs2_1pass_build_lists(struct part_info * part) · line 1318

Quoted 9 lines
fs/jffs2/jffs2_1pass.c +6 -2
-		node = (struct jffs2_unknown_node *) get_node_mem((u32)part->offset + offset);
-		if (node->magic == JFFS2_MAGIC_BITMASK && hdr_crc(node)) {
+		/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+		ofs = 0;
+
+		/* Scan only 4KiB of 0xFF before declaring it's empty */
+		while (ofs < EMPTY_SCAN_SIZE(part->sector_size) &&
+				*(uint32_t *)(&buf[ofs]) == 0xFFFFFFFF)

please use readx/writex

Why? it's memory buffer actually.

Regards, Ilya.

#10 lore raw

PATCH 3/6 jffs2: rewrite jffs2 scanning code based on Linux one

In reply to Ilya Yanok

Dear Ilya Yanok,

Quoted 11 lines · In message <[email protected]> you wrote:

Rewrites jffs2_1pass_build_lists() function in style of Linux's jffs2_scan_medium() and jffs2_scan_eraseblock().
This includes:
- Caching flash acceses
- Smart dealing with free space

---
 fs/jffs2/jffs2_1pass.c |  227 ++++++++++++++++++++++++++++++++++++------------
 1 files changed, 171 insertions(+), 56 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Documentation is the castor oil of programming.
Managers know it must be good because the programmers hate it so much.
#11 lore raw

PATCH 3/6 jffs2: rewrite jffs2 scanning code based on Linux one

In reply to Ilya Yanok

Hi Ilya,

Quoted 5 lines · Ilya Yanok

Rewrites jffs2_1pass_build_lists() function in style of Linux's jffs2_scan_medium() and jffs2_scan_eraseblock().
This includes:
- Caching flash acceses
- Smart dealing with free space

After this patch is now applied to the main u-boot repo, I get the following warning when compiling my new board with OneNAND & JFFS2 support:

[stefan at kubuntu u-boot (vcth-onenand-ubi-ver3)]$ make -s -j5 jffs2_1pass.c:1411:1: warning: "min_t" redefined
In file included
from /home/stefan/git/u-boot/u-boot/include/linux/mtd/mtd-abi.h:11,

                 from /home/stefan/git/u-boot/u-boot/include/linux/mtd/mtd.h:11,
                 from jffs2_1pass.c:275:

/home/stefan/git/u-boot/u-boot/include/linux/mtd/compat.h:34:1: warning: this is the location of the previous definition

As it seems you added the "min_t" define to this file (see below). Why was this needed? I can safely remove it from my version. Do you see a problem with removing it on your test platform?

Thanks.

<snip>

fs/jffs2/jffs2_1pass.c dump_dirents(struct b_lists *pL) · line 1269

Quoted 10 lines
fs/jffs2/jffs2_1pass.c +6 -0
@@ -1268,17 +1261,33 @@ dump_dirents(struct b_lists *pL)
 }
 #endif
 
+#define min_t(type, x, y) ({                    \
+	type __min1 = (x);                      \
+	type __min2 = (y);                      \
+	__min1 < __min2 ? __min1: __min2; })
+
+#define DEFAULT_EMPTY_SCAN_SIZE	4096

...

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================

author
#12 lore raw

PATCH 3/6 jffs2: rewrite jffs2 scanning code based on Linux one

Hi Stefan,

Quoted 8 lines · Stefan Roese

After this patch is now applied to the main u-boot repo, I get the following warning when compiling my new board with OneNAND & JFFS2 support:

[stefan at kubuntu u-boot (vcth-onenand-ubi-ver3)]$ make -s -j5 jffs2_1pass.c:1411:1: warning: "min_t" redefined
In file included
from /home/stefan/git/u-boot/u-boot/include/linux/mtd/mtd-abi.h:11,

Quoted 9 lines
                 from /home/stefan/git/u-boot/u-boot/include/linux/mtd/mtd.h:11,
                 from jffs2_1pass.c:275:

/home/stefan/git/u-boot/u-boot/include/linux/mtd/compat.h:34:1: warning: this is the location of the previous definition

As it seems you added the "min_t" define to this file (see below). Why was this needed? I can safely remove it from my version. Do you see a problem with removing it on your test platform?

Thanks for reporting. That's obviously because we already have min_t definition in <linux/mtd/compat.h> and OneNAND support includes this header from somewhere while NOR support doesn't. I've changed jffs2_1pass.c to directly include <linux/mtd/compat.h> directly instead of defining own min_t. Please see patch in the follow up message.

Regards, Ilya.

author
#13 lore raw

PATCH 1/1 jffs2: include <linux/mtd/compat.h> instead of defining own min_t

Include <linux/mtd/compat.h> header for min_t definition instead of providing our own one. Removes warnings in case of OneNAND support enabled.

Although I thinks it's a bit silly to include <linux/mtd/compat.h> just for min_t...

---
 fs/jffs2/jffs2_1pass.c |    6 +-----
 1 files changed, 1 insertions(+), 5 deletions(-)
fs/jffs2/jffs2_1pass.c +1 -5
index be7c1a1..11b66ab 100644
@@ -119,6 +119,7 @@
 #include <watchdog.h>
 #include <jffs2/jffs2.h>
 #include <jffs2/jffs2_1pass.h>
+#include <linux/mtd/compat.h>
 
 #include "jffs2_private.h"
 
@@ -1408,11 +1409,6 @@ dump_dirents(struct b_lists *pL)
 }
 #endif
 
-#define min_t(type, x, y) ({                    \
-	type __min1 = (x);                      \
-	type __min2 = (y);                      \
-	__min1 < __min2 ? __min1: __min2; })
-
 #define DEFAULT_EMPTY_SCAN_SIZE	4096
 
 static inline uint32_t EMPTY_SCAN_SIZE(uint32_t sector_size)
Signature · 1 line
1.5.6.1
#14 lore raw

PATCH 1/1 jffs2: include <linux/mtd/compat.h> instead of defining own min_t

Quoted 8 lines · Ilya Yanok

Include <linux/mtd/compat.h> header for min_t definition instead of providing our own one. Removes warnings in case of OneNAND support enabled.

Although I thinks it's a bit silly to include <linux/mtd/compat.h> just for min_t...

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================

#15 lore raw

PATCH 1/1 jffs2: include <linux/mtd/compat.h> instead of defining own min_t

In reply to Ilya Yanok

Dear Ilya Yanok,

Quoted 11 lines · In message <[email protected]> you wrote:

Include <linux/mtd/compat.h> header for min_t definition instead of providing our own one. Removes warnings in case of OneNAND support enabled.

Although I thinks it's a bit silly to include <linux/mtd/compat.h> just for min_t...

---
 fs/jffs2/jffs2_1pass.c |    6 +-----
 1 files changed, 1 insertions(+), 5 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Who is the oldest inhabitant of this village?"
"We haven't got one; we had one, but he died three weeks ago."
author
#16 lore raw

PATCH 4/6 jffs2: add buffer to cache flash accesses

In reply to Ilya Yanok

With this patch JFFS2 code allocates memory buffer of max_totlen size (size of the largest node, calculated during scan time) and uses it to store entire node. Speeds up loading. If malloc fails we use old ways to do things.

---
 fs/jffs2/jffs2_1pass.c   |  116 ++++++++++++++++++++++++++++-----------------
 fs/jffs2/jffs2_private.h |    2 +-
 2 files changed, 73 insertions(+), 45 deletions(-)
fs/jffs2/jffs2_1pass.c +72 -44
index 30a6dba..73d3ddc 100644
@@ -245,7 +245,7 @@ static void *get_fl_mem_nand(u32 off, u32 size, void *ext_buf)
 	return buf;
 }
 
-static void *get_node_mem_nand(u32 off)
+static void *get_node_mem_nand(u32 off, void *ext_buf)
 {
 	struct jffs2_unknown_node node;
 	void *ret = NULL;
@@ -255,7 +255,7 @@ static void *get_node_mem_nand(u32 off)
 
 	if (!(ret = get_fl_mem_nand(off, node.magic ==
 			       JFFS2_MAGIC_BITMASK ? node.totlen : sizeof(node),
-			       NULL))) {
+			       ext_buf))) {
 		printf("off = %#x magic %#x type %#x node.totlen = %d\n",
 		       off, node.magic, node.nodetype, node.totlen);
 	}
@@ -344,7 +344,7 @@ static void *get_fl_mem_onenand(u32 off, u32 size, void *ext_buf)
 	return buf;
 }
 
-static void *get_node_mem_onenand(u32 off)
+static void *get_node_mem_onenand(u32 off, void *ext_buf)
 {
 	struct jffs2_unknown_node node;
 	void *ret = NULL;
@@ -354,7 +354,7 @@ static void *get_node_mem_onenand(u32 off)
 
 	ret = get_fl_mem_onenand(off, node.magic ==
 			JFFS2_MAGIC_BITMASK ? node.totlen : sizeof(node),
-			NULL);
+			ext_buf);
 	if (!ret) {
 		printf("off = %#x magic %#x type %#x node.totlen = %d\n",
 		       off, node.magic, node.nodetype, node.totlen);
@@ -377,7 +377,7 @@ static void put_fl_mem_onenand(void *buf)
  * NOR flash memory is mapped in processor's address space,
  * just return address.
  */
-static inline void *get_fl_mem_nor(u32 off)
+static inline void *get_fl_mem_nor(u32 off, u32 size, void *ext_buf)
 {
 	u32 addr = off;
 	struct mtdids *id = current_part->dev->id;
@@ -386,18 +386,22 @@ static inline void *get_fl_mem_nor(u32 off)
 	flash_info_t *flash = &flash_info[id->num];
 
 	addr += flash->start[0];
+	if (ext_buf) {
+		memcpy(ext_buf, (void *)addr, size);
+		return ext_buf;
+	}
 	return (void*)addr;
 }
 
-static inline void *get_fl_mem_nor_copy(u32 off, u32 size, void *ext_buf)
+static inline void *get_node_mem_nor(u32 off, void *ext_buf)
 {
-	memcpy(ext_buf, get_fl_mem_nor(off), size);
-	return ext_buf;
-}
+	struct jffs2_unknown_node *pNode;
 
-static inline void *get_node_mem_nor(u32 off)
-{
-	return (void*)get_fl_mem_nor(off);
+	/* pNode will point directly to flash - don't provide external buffer
+	   and don't care about size */
+	pNode = get_fl_mem_nor(off, 0, NULL);
+	return (void *)get_fl_mem_nor(off, pNode->magic == JFFS2_MAGIC_BITMASK ?
+			pNode->totlen : sizeof(*pNode), ext_buf);
 }
 #endif
 
@@ -412,9 +416,7 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
 
 #if defined(CONFIG_CMD_FLASH)
 	if (id->type == MTD_DEV_TYPE_NOR) {
-		if (ext_buf)
-			return get_fl_mem_nor_copy(off, size, ext_buf);
-		return get_fl_mem_nor(off);
+		return get_fl_mem_nor(off, size, ext_buf);
 	}
 #endif
 
@@ -432,34 +434,38 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
 	return (void*)off;
 }
 
-static inline void *get_node_mem(u32 off)
+static inline void *get_node_mem(u32 off, void *ext_buf)
 {
 	struct mtdids *id = current_part->dev->id;
 
 #if defined(CONFIG_CMD_FLASH)
 	if (id->type == MTD_DEV_TYPE_NOR)
-		return get_node_mem_nor(off);
+		return get_node_mem_nor(off, ext_buf);
 #endif
 
 #if defined(CONFIG_JFFS2_NAND) && \
     defined(CONFIG_CMD_NAND)
 	if (id->type == MTD_DEV_TYPE_NAND)
-		return get_node_mem_nand(off);
+		return get_node_mem_nand(off, ext_buf);
 #endif
 
 #if defined(CONFIG_CMD_ONENAND)
 	if (id->type == MTD_DEV_TYPE_ONENAND)
-		return get_node_mem_onenand(off);
+		return get_node_mem_onenand(off, ext_buf);
 #endif
 
 	printf("get_node_mem: unknown device type, using raw offset!\n");
 	return (void*)off;
 }
 
-static inline void put_fl_mem(void *buf)
+static inline void put_fl_mem(void *buf, void *ext_buf)
 {
 	struct mtdids *id = current_part->dev->id;
 
+	/* If buf is the same as ext_buf, it was provided by the caller -
+	   we shouldn't free it then. */
+	if (buf == ext_buf)
+		return;
 	switch (id->type) {
 #if defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)
 	case MTD_DEV_TYPE_NAND:
@@ -666,6 +672,7 @@ jffs2_free_cache(struct part_info *part)
 		pL = (struct b_lists *)part->jffs2_priv;
 		free_nodes(&pL->frag);
 		free_nodes(&pL->dir);
+		free(pL->readbuf);
 		free(pL);
 	}
 }
@@ -712,7 +719,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 	 */
 	for (b = pL->frag.listHead; b != NULL; b = b->next) {
 		jNode = (struct jffs2_raw_inode *) get_fl_mem(b->offset,
-		        sizeof(struct jffs2_raw_inode), NULL);
+			sizeof(struct jffs2_raw_inode), pL->readbuf);
 		if ((inode == jNode->ino)) {
 			/* get actual file length from the newest node */
 			if (jNode->version >= latestVersion) {
@@ -720,12 +727,13 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 				latestVersion = jNode->version;
 			}
 		}
-		put_fl_mem(jNode);
+		put_fl_mem(jNode, pL->readbuf);
 	}
 #endif
 
 	for (b = pL->frag.listHead; b != NULL; b = b->next) {
-		jNode = (struct jffs2_raw_inode *) get_node_mem(b->offset);
+		jNode = (struct jffs2_raw_inode *) get_node_mem(b->offset,
+								pL->readbuf);
 		if ((inode == jNode->ino)) {
 #if 0
 			putLabeledWord("\r\n\r\nread_inode: totlen = ", jNode->totlen);
@@ -752,11 +760,11 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 				src = ((uchar *) jNode) + sizeof(struct jffs2_raw_inode);
 				/* ignore data behind latest known EOF */
 				if (jNode->offset > totalSize) {
-					put_fl_mem(jNode);
+					put_fl_mem(jNode, pL->readbuf);
 					continue;
 				}
 				if (!data_crc(jNode)) {
-					put_fl_mem(jNode);
+					put_fl_mem(jNode, pL->readbuf);
 					continue;
 				}
 
@@ -797,7 +805,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 				default:
 					/* unknown */
 					putLabeledWord("UNKOWN COMPRESSION METHOD = ", jNode->compr);
-					put_fl_mem(jNode);
+					put_fl_mem(jNode, pL->readbuf);
 					return -1;
 					break;
 				}
@@ -809,7 +817,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 #endif
 		}
 		counter++;
-		put_fl_mem(jNode);
+		put_fl_mem(jNode, pL->readbuf);
 	}
 
 #if 0
@@ -835,12 +843,13 @@ jffs2_1pass_find_inode(struct b_lists * pL, const char *name, u32 pino)
 	counter = 0;
 	/* we need to search all and return the inode with the highest version */
 	for(b = pL->dir.listHead; b; b = b->next, counter++) {
-		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset);
+		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
+								pL->readbuf);
 		if ((pino == jDir->pino) && (len == jDir->nsize) &&
 		    (jDir->ino) &&	/* 0 for unlink */
 		    (!strncmp((char *)jDir->name, name, len))) {	/* a match */
 			if (jDir->version < version) {
-				put_fl_mem(jDir);
+				put_fl_mem(jDir, pL->readbuf);
 				continue;
 			}
 
@@ -862,7 +871,7 @@ jffs2_1pass_find_inode(struct b_lists * pL, const char *name, u32 pino)
 		putLabeledWord("b = ", (u32) b);
 		putLabeledWord("counter = ", counter);
 #endif
-		put_fl_mem(jDir);
+		put_fl_mem(jDir, pL->readbuf);
 	}
 	return inode;
 }
@@ -956,7 +965,8 @@ jffs2_1pass_list_inodes(struct b_lists * pL, u32 pino)
 	struct jffs2_raw_dirent *jDir;
 
 	for (b = pL->dir.listHead; b; b = b->next) {
-		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset);
+		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
+								pL->readbuf);
 		if ((pino == jDir->pino) && (jDir->ino)) { /* ino=0 -> unlink */
 			u32 i_version = 0;
 			struct jffs2_raw_inode ojNode;
@@ -969,20 +979,23 @@ jffs2_1pass_list_inodes(struct b_lists * pL, u32 pino)
 				if (jNode->ino == jDir->ino && jNode->version >= i_version) {
 					i_version = jNode->version;
 					if (i)
-						put_fl_mem(i);
+						put_fl_mem(i, NULL);
 
 					if (jDir->type == DT_LNK)
-						i = get_node_mem(b2->offset);
+						i = get_node_mem(b2->offset,
+								 NULL);
 					else
-						i = get_fl_mem(b2->offset, sizeof(*i), NULL);
+						i = get_fl_mem(b2->offset,
+							       sizeof(*i),
+							       NULL);
 				}
 				b2 = b2->next;
 			}
 
 			dump_inode(pL, jDir, i);
-			put_fl_mem(i);
+			put_fl_mem(i, NULL);
 		}
-		put_fl_mem(jDir);
+		put_fl_mem(jDir, pL->readbuf);
 	}
 	return pino;
 }
@@ -1060,10 +1073,11 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
 
 	/* we need to search all and return the inode with the highest version */
 	for(b = pL->dir.listHead; b; b = b->next) {
-		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset);
+		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
+								pL->readbuf);
 		if (ino == jDir->ino) {
 			if (jDir->version < version) {
-				put_fl_mem(jDir);
+				put_fl_mem(jDir, pL->readbuf);
 				continue;
 			}
 
@@ -1080,7 +1094,7 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
 			jDirFoundPino = jDir->pino;
 			version = jDir->version;
 		}
-		put_fl_mem(jDir);
+		put_fl_mem(jDir, pL->readbuf);
 	}
 	/* now we found the right entry again. (shoulda returned inode*) */
 	if (jDirFoundType != DT_LNK)
@@ -1089,7 +1103,8 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
 	/* it's a soft link so we follow it again. */
 	b2 = pL->frag.listHead;
 	while (b2) {
-		jNode = (struct jffs2_raw_inode *) get_node_mem(b2->offset);
+		jNode = (struct jffs2_raw_inode *) get_node_mem(b2->offset,
+								pL->readbuf);
 		if (jNode->ino == jDirFoundIno) {
 			src = (unsigned char *)jNode + sizeof(struct jffs2_raw_inode);
 
@@ -1101,11 +1116,11 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
 #endif
 			strncpy(tmp, (char *)src, jNode->dsize);
 			tmp[jNode->dsize] = '\0';
-			put_fl_mem(jNode);
+			put_fl_mem(jNode, pL->readbuf);
 			break;
 		}
 		b2 = b2->next;
-		put_fl_mem(jNode);
+		put_fl_mem(jNode, pL->readbuf);
 	}
 	/* ok so the name of the new file to find is in tmp */
 	/* if it starts with a slash it is root based else shared dirs */
@@ -1240,7 +1255,8 @@ dump_dirents(struct b_lists *pL)
 	putstr("\r\n\r\n******The directory Entries******\r\n");
 	b = pL->dir.listHead;
 	while (b) {
-		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset);
+		jDir = (struct jffs2_raw_dirent *) get_node_mem(b->offset,
+								pL->readbuf);
 		putstr("\r\n");
 		putnstr(jDir->name, jDir->nsize);
 		putLabeledWord("\r\n\tbuild_list: magic = ", jDir->magic);
@@ -1256,7 +1272,7 @@ dump_dirents(struct b_lists *pL)
 		putLabeledWord("\tbuild_list: name_crc = ", jDir->name_crc);
 		putLabeledWord("\tbuild_list: offset = ", b->offset);	/* FIXME: ? [RS] */
 		b = b->next;
-		put_fl_mem(jDir);
+		put_fl_mem(jDir, pL->readbuf);
 	}
 }
 #endif
@@ -1286,6 +1302,7 @@ jffs2_1pass_build_lists(struct part_info * part)
 	u32 counter4 = 0;
 	u32 counterF = 0;
 	u32 counterN = 0;
+	u32 max_totlen = 0;
 	u32 buf_size = DEFAULT_EMPTY_SCAN_SIZE;
 	char *buf;
 
@@ -1415,6 +1432,8 @@ jffs2_1pass_build_lists(struct part_info * part)
 				if (insert_node(&pL->frag, (u32) part->offset +
 						ofs) == NULL)
 					return 0;
+				if (max_totlen < node->totlen)
+					max_totlen = node->totlen;
 				break;
 			case JFFS2_NODETYPE_DIRENT:
 				if (buf_ofs + buf_len < ofs + sizeof(struct
@@ -1440,6 +1459,8 @@ jffs2_1pass_build_lists(struct part_info * part)
 				if (insert_node(&pL->dir, (u32) part->offset +
 						ofs) == NULL)
 					return 0;
+				if (max_totlen < node->totlen)
+					max_totlen = node->totlen;
 				counterN++;
 				break;
 			case JFFS2_NODETYPE_CLEANMARKER:
@@ -1468,6 +1489,13 @@ jffs2_1pass_build_lists(struct part_info * part)
 
 	free(buf);
 	putstr("\b\b done.\r\n");		/* close off the dots */
+
+	/* We don't care if malloc failed - then each read operation will
+	 * allocate its own buffer as necessary (NAND) or will read directly
+	 * from flash (NOR).
+	 */
+	pL->readbuf = malloc(max_totlen);
+
 	/* turn the lcd back on. */
 	/* splash(); */
 
fs/jffs2/jffs2_private.h +1 -1
index 9745762..3633dea 100644
@@ -24,7 +24,7 @@ struct b_list {
 struct b_lists {
 	struct b_list dir;
 	struct b_list frag;
-
+	void *readbuf;
 };
 
 struct b_compr_info {
Signature · 1 line
1.5.6.1
#17 lore raw

PATCH 4/6 jffs2: add buffer to cache flash accesses

Dear Ilya Yanok,

Quoted 11 lines · In message <[email protected]> you wrote:

With this patch JFFS2 code allocates memory buffer of max_totlen size (size of the largest node, calculated during scan time) and uses it to store entire node. Speeds up loading. If malloc fails we use old ways to do things.

---
 fs/jffs2/jffs2_1pass.c   |  116 ++++++++++++++++++++++++++++-----------------
 fs/jffs2/jffs2_private.h |    2 +-
 2 files changed, 73 insertions(+), 45 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The Gates in my computer are AND, OR and NOT; they are not Bill.
author
#18 lore raw

PATCH 5/6 jffs2: summary support

In reply to Ilya Yanok

This patch adds support for reading fs information from summary node instead of scanning full eraseblock.

---
 fs/jffs2/jffs2_1pass.c |  187 +++++++++++++++++++++++++++++++++++++++++++++++-
 fs/jffs2/summary.h     |  163 +++++++++++++++++++++++++++++++++++++++++
 include/jffs2/jffs2.h  |   19 +++++
 3 files changed, 368 insertions(+), 1 deletions(-)
 create mode 100644 fs/jffs2/summary.h
fs/jffs2/jffs2_1pass.c +186 -1
index 73d3ddc..4e49a05 100644
@@ -138,6 +138,8 @@
 # define DEBUGF(fmt,args...)
 #endif
 
+#include "summary.h"
+
 /* keeps pointer to currentlu processed partition */
 static struct part_info *current_part;
 
@@ -1214,6 +1216,132 @@ jffs2_1pass_rescan_needed(struct part_info *part)
 	return 0;
 }
 
+#define dbg_summary(...) do {} while (0);
+/* Process the stored summary information - helper function for
+ * jffs2_sum_scan_sumnode()
+ */
+
+static int jffs2_sum_process_sum_data(struct part_info *part, uint32_t offset,
+				struct jffs2_raw_summary *summary,
+				struct b_lists *pL)
+{
+	void *sp;
+	int i;
+
+	sp = summary->sum;
+
+	for (i = 0; i < summary->sum_num; i++) {
+		dbg_summary("processing summary index %d\n", i);
+
+		switch (((struct jffs2_sum_unknown_flash *)sp)->nodetype) {
+			case JFFS2_NODETYPE_INODE: {
+				struct jffs2_sum_inode_flash *spi;
+				spi = sp;
+
+				dbg_summary("Inode at 0x%08x-0x%08x\n",
+					    offset + spi->offset,
+					    offset + spi->offset + spi->totlen);
+
+				if (insert_node(&pL->frag, (u32) part->offset +
+						offset + spi->offset) == NULL)
+					return -1;
+
+				sp += JFFS2_SUMMARY_INODE_SIZE;
+
+				break;
+			}
+
+			case JFFS2_NODETYPE_DIRENT: {
+				struct jffs2_sum_dirent_flash *spd;
+				spd = sp;
+
+				dbg_summary("Dirent at 0x%08x-0x%08x\n",
+					    offset + spd->offset,
+					    offset + spd->offset + spd->totlen);
+
+				if (insert_node(&pL->dir, (u32) part->offset +
+						offset + spd->offset) == NULL)
+					return -1;
+
+				sp += JFFS2_SUMMARY_DIRENT_SIZE(spd->nsize);
+
+				break;
+			}
+			default : {
+				uint16_t nodetype =
+					((struct jffs2_sum_unknown_flash *)
+					 sp)->nodetype;
+				printf("Unsupported node type %x found in "
+						"summary!\n", nodetype);
+				break;
+			}
+		}
+	}
+	return 0;
+}
+
+/* Process the summary node - called from jffs2_scan_eraseblock() */
+int jffs2_sum_scan_sumnode(struct part_info *part, uint32_t offset,
+			   struct jffs2_raw_summary *summary, uint32_t sumsize,
+			   struct b_lists *pL)
+{
+	struct jffs2_unknown_node crcnode;
+	int ret, ofs;
+	uint32_t crc;
+
+	ofs = part->sector_size - sumsize;
+
+	dbg_summary("summary found for 0x%08x at 0x%08x (0x%x bytes)\n",
+		    offset, offset + ofs, sumsize);
+
+	/* OK, now check for node validity and CRC */
+	crcnode.magic = JFFS2_MAGIC_BITMASK;
+	crcnode.nodetype = JFFS2_NODETYPE_SUMMARY;
+	crcnode.totlen = summary->totlen;
+	crc = crc32_no_comp(0, (uchar *)&crcnode, sizeof(crcnode)-4);
+
+	if (summary->hdr_crc != crc) {
+		dbg_summary("Summary node header is corrupt (bad CRC or "
+				"no summary at all)\n");
+		goto crc_err;
+	}
+
+	if (summary->totlen != sumsize) {
+		dbg_summary("Summary node is corrupt (wrong erasesize?)\n");
+		goto crc_err;
+	}
+
+	crc = crc32_no_comp(0, (uchar *)summary,
+			sizeof(struct jffs2_raw_summary)-8);
+
+	if (summary->node_crc != crc) {
+		dbg_summary("Summary node is corrupt (bad CRC)\n");
+		goto crc_err;
+	}
+
+	crc = crc32_no_comp(0, (uchar *)summary->sum,
+			sumsize - sizeof(struct jffs2_raw_summary));
+
+	if (summary->sum_crc != crc) {
+		dbg_summary("Summary node data is corrupt (bad CRC)\n");
+		goto crc_err;
+	}
+
+	if (summary->cln_mkr)
+		dbg_summary("Summary : CLEANMARKER node \n");
+
+	ret = jffs2_sum_process_sum_data(part, offset, summary, pL);
+	if (ret)
+		return ret;		/* real error */
+
+	return 1;
+
+crc_err:
+	putstr("Summary node crc error, skipping summary information.\n");
+
+	return 0;
+}
+
 #ifdef DEBUG_FRAGMENTS
 static void
 dump_fragments(struct b_lists *pL)
@@ -1321,10 +1449,65 @@ jffs2_1pass_build_lists(struct part_info * part)
 	for (i = 0; i < nr_sectors; i++) {
 		uint32_t sector_ofs = i * part->sector_size;
 		uint32_t buf_ofs = sector_ofs;
-		uint32_t buf_len = EMPTY_SCAN_SIZE(part->sector_size);
+		uint32_t buf_len;
 		uint32_t ofs, prevofs;
+		struct jffs2_sum_marker *sm;
+		void *sumptr = NULL;
+		uint32_t sumlen;
+		int ret;
 
 		WATCHDOG_RESET();
+
+		buf_len = sizeof(*sm);
+
+		/* Read as much as we want into the _end_ of the preallocated
+		 * buffer
+		 */
+		get_fl_mem(part->offset + sector_ofs + part->sector_size -
+				buf_len, buf_len, buf + buf_size - buf_len);
+
+		sm = (void *)buf + buf_size - sizeof(*sm);
+		if (sm->magic == JFFS2_SUM_MAGIC) {
+			sumlen = part->sector_size - sm->offset;
+			sumptr = buf + buf_size - sumlen;
+
+			/* Now, make sure the summary itself is available */
+			if (sumlen > buf_size) {
+				/* Need to kmalloc for this. */
+				sumptr = malloc(sumlen);
+				if (!sumptr) {
+					putstr("Can't get memory for summary "
+							"node!\n");
+					return 0;
+				}
+				memcpy(sumptr + sumlen - buf_len, buf +
+						buf_size - buf_len, buf_len);
+			}
+			if (buf_len < sumlen) {
+				/* Need to read more so that the entire summary
+				 * node is present
+				 */
+				get_fl_mem(part->offset + sector_ofs +
+						part->sector_size - sumlen,
+						sumlen - buf_len, sumptr);
+			}
+		}
+
+		if (sumptr) {
+			ret = jffs2_sum_scan_sumnode(part, sector_ofs, sumptr,
+					sumlen, pL);
+
+			if (buf_size && sumlen > buf_size)
+				free(sumptr);
+			if (ret < 0)
+				return 0;
+			if (ret)
+				continue;
+
+		}
+
+		buf_len = EMPTY_SCAN_SIZE(part->sector_size);
+
 		get_fl_mem((u32)part->offset + buf_ofs, buf_len, buf);
 
 		/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
@@ -1477,6 +1660,8 @@ jffs2_1pass_build_lists(struct part_info * part)
 						node->totlen,
 						sizeof(struct jffs2_unknown_node));
 				break;
+			case JFFS2_NODETYPE_SUMMARY:
+				break;
 			default:
 				printf("Unknown node type: %x len %d offset 0x%x\n",
 					node->nodetype,
fs/jffs2/summary.h new file +163 -0

163 lines not on this page · raw message

include/jffs2/jffs2.h +19 -0
index d142cd1..ed96bab 100644
@@ -50,6 +50,9 @@
 #define JFFS2_EMPTY_BITMASK 0xffff
 #define JFFS2_DIRTY_BITMASK 0x0000
 
+/* Summary node MAGIC marker */
+#define JFFS2_SUM_MAGIC	0x02851885
+
 /* We only allow a single char for length, and 0xFF is empty flash so
    we don't want it confused with a real length. Hence max 254.
 */
@@ -89,6 +92,7 @@
 #define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2)
 #define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
 #define JFFS2_NODETYPE_PADDING (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 4)
+#define JFFS2_NODETYPE_SUMMARY (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 6)
 
 /* Maybe later... */
 /*#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3) */
@@ -166,9 +170,24 @@ struct jffs2_raw_inode
 /*	__u8 data[dsize]; */
 } __attribute__((packed));
 
+struct jffs2_raw_summary
+{
+	__u16 magic;
+	__u16 nodetype; 	/* = JFFS2_NODETYPE_SUMMARY */
+	__u32 totlen;
+	__u32 hdr_crc;
+	__u32 sum_num;	/* number of sum entries*/
+	__u32 cln_mkr;	/* clean marker size, 0 = no cleanmarker */
+	__u32 padded;	/* sum of the size of padding nodes */
+	__u32 sum_crc;	/* summary information crc */
+	__u32 node_crc; 	/* node crc */
+	__u32 sum[0]; 	/* inode summary info */
+};
+
 union jffs2_node_union {
 	struct jffs2_raw_inode i;
 	struct jffs2_raw_dirent d;
+	struct jffs2_raw_summary s;
 	struct jffs2_unknown_node u;
 } __attribute__((packed));
 
Signature · 1 line
1.5.6.1
#19 lore raw

PATCH 5/6 jffs2: summary support

Dear Ilya Yanok,

Quoted 10 lines · In message <[email protected]> you wrote:

This patch adds support for reading fs information from summary node instead of scanning full eraseblock.

---
 fs/jffs2/jffs2_1pass.c |  187 +++++++++++++++++++++++++++++++++++++++++++++++-
 fs/jffs2/summary.h     |  163 +++++++++++++++++++++++++++++++++++++++++
 include/jffs2/jffs2.h  |   19 +++++
 3 files changed, 368 insertions(+), 1 deletions(-)
 create mode 100644 fs/jffs2/summary.h

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Humans do claim a great deal for that particular emotion (love).
	-- Spock, "The Lights of Zetar", stardate 5725.6
author
#20 lore raw

PATCH 6/6 jffs2: cache data_crc results

In reply to Ilya Yanok

As we moved data_crc() invocation from jffs2_1pass_build_lists() to jffs2_1pass_read_inode() data_crc is going to be calculated on each inode access. This patch adds caching of data_crc() results. There is no significant improvement in speed (because of flash access caching added in previous patch I think, crc in RAM is really fast) but this patch impacts memory usage -- every b_node structure uses 12 bytes instead of 8.

---
 fs/jffs2/jffs2_1pass.c   |    5 ++++-
 fs/jffs2/jffs2_private.h |    1 +
 2 files changed, 5 insertions(+), 1 deletions(-)
fs/jffs2/jffs2_1pass.c +4 -1
index 4e49a05..be7c1a1 100644
@@ -765,7 +765,10 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 					put_fl_mem(jNode, pL->readbuf);
 					continue;
 				}
-				if (!data_crc(jNode)) {
+				if (b->datacrc == CRC_UNKNOWN)
+					b->datacrc = data_crc(jNode) ?
+						CRC_OK : CRC_BAD;
+				if (b->datacrc == CRC_BAD) {
 					put_fl_mem(jNode, pL->readbuf);
 					continue;
 				}
fs/jffs2/jffs2_private.h +1 -0
index 3633dea..658b325 100644
@@ -7,6 +7,7 @@
 struct b_node {
 	u32 offset;
 	struct b_node *next;
+	enum { CRC_UNKNOWN = 0, CRC_OK, CRC_BAD } datacrc;
 };
 
 struct b_list {
Signature · 1 line
1.5.6.1
#21 lore raw

PATCH 6/6 jffs2: cache data_crc results

Dear Ilya Yanok,

Quoted 8 lines · In message <[email protected]> you wrote:

As we moved data_crc() invocation from jffs2_1pass_build_lists() to jffs2_1pass_read_inode() data_crc is going to be calculated on each inode access. This patch adds caching of data_crc() results. There is no significant improvement in speed (because of flash access caching added in previous patch I think, crc in RAM is really fast) but this patch impacts memory usage -- every b_node structure uses 12 bytes instead of 8.

Quoted 6 lines
---
 fs/jffs2/jffs2_1pass.c   |    5 ++++-
 fs/jffs2/jffs2_private.h |    1 +
 2 files changed, 5 insertions(+), 1 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Power is danger.
	-- The Centurion, "Balance of Terror", stardate 1709.2