Skip to contentSkip to conversation

Is there something like multi-device fan out ?

DISCUSSION J.A. Magallon 3 participants 4 messages Dec 11, 2008 – Dec 12, 2008

lore
Share & tools
lore
#0 lore raw

Hi...

I suspect this sounds like a strange question.
A friend has a company that distributes his own catalogs on CD-ROM, and wants to build a mass-burning box (something like 8 CD/DVD burners), running linux.

The problem is how to burn an image at the same time to all writers. I could write a script, but I think this would launch 8 reads on the same iso file, all desynchronized, that will drive nuts the disk. Is there any way to get all the /dev/sr? devices and build something like a fan-out device, or like a RAID1-CDROM or whatever ?
I suppose it has to be done at the kernel level...

TIA

Signature · 3 lines
J.A. Magallon                       \                     Software is like sex:
                                     \               It's better when it's free
Mac OS X Leopard 10.5.5 (build 9F33) x86-64 - Darwin Kernel 9.5.0
#1 lore raw
Quoted 9 lines · J.A. Magallon

Hi...

I suspect this sounds like a strange question.
A friend has a company that distributes his own catalogs on CD-ROM, and wants to build a mass-burning box (something like 8 CD/DVD burners), running linux.

The problem is how to burn an image at the same time to all writers. I could write a script, but I think this would launch 8 reads on the same iso file, all desynchronized, that will drive nuts the disk.

Not really. They will end up synchronized through a mechanism called the cache capture effect: the image that is behind will have the benefit of having the precursors already having read the input, so it's ready for use in the cache already, therefore it will run faster. The stable condition, as long as the writers are close to the same speed and the writes are started at close enough to the the same time, is that they are all writing the same data at almost the same time.

-hpa

#2 lore raw
Quoted 11 lines · H. Peter Anvin
Quoted 9 lines · J.A. Magallon

Hi...

I suspect this sounds like a strange question.
A friend has a company that distributes his own catalogs on CD-ROM, and wants to build a mass-burning box (something like 8 CD/DVD burners), running linux.

The problem is how to burn an image at the same time to all writers. I could write a script, but I think this would launch 8 reads on the same iso file, all desynchronized, that will drive nuts the disk.

Quoted 7 lines

Not really. They will end up synchronized through a mechanism called the cache capture effect: the image that is behind will have the benefit of having the precursors already having read the input, so it's ready for use in the cache already, therefore it will run faster. The stable condition, as long as the writers are close to the same speed and the writes are started at close enough to the the same time, is that they are all writing the same data at almost the same time.

And if you want to be absolutly sure.

RAM is cheap nowadays, plug in enough RAM (no swap!) so you can copy the image to burn into a tmpfs before starting to write them.
No disc IO involved at all. ;-)

A Single-layer DVD has a maximum of around 4.4GB so if you plugging in 8GB, you are on the safe side.

Only for a Dual-Layer DVD you would need more RAM.

Bis denn

Signature · 4 lines
Real Programmers consider "what you see is what you get" to be just as 
bad a concept in Text Editors as it is in women. No, the Real Programmer
wants a "you asked for it, you got it" text editor -- complicated, 
cryptic, powerful, unforgiving, dangerous.
#3 lore raw
Quoted 7 lines · Matthias Schniedermeyer

And if you want to be absolutly sure.

RAM is cheap nowadays, plug in enough RAM (no swap!) so you can copy the image to burn into a tmpfs before starting to write them.
No disc IO involved at all. ;-)

You don't have to copy it to tmpfs, either. Just let the cache do its job.

-hpa