SiI 3112 support in kernel 2.6.27
Q: In order to support the SiI 3112 (PCMCIA) controller, what module (or built in option) should be set for kernel version 2.6.27?
laptop linux # lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:04.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
00:04.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
00:08.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12)
00:08.1 Communication controller: ESS Technology ESS Modem (rev 12)
00:10.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adapter (rev 11) 01:01.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 13)
02:00.0 Mass storage controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02) laptop linux #
Quoted 1 line · Thanasis
Q: In order to support the SiI 3112 (PCMCIA) controller, what module (or built in option) should be set for kernel version 2.6.27?
sata_sil (CONFIG_SATA_SIL)
Regards,
Jeff
On Sun, 14 Dec 2008 16:42:43 +0200, I waved a wand and this message magically appears in front of Thanasis:
Quoted 2 lines
Q: In order to support the SiI 3112 (PCMCIA) controller, what module (or built in option) should be set for kernel version 2.6.27?
Build the sata_sil module.
Signature · 3 lines
http://www.munted.org.uk Fearsome grindings.