Time drift again.
PATCH 1/1 Time drift again.
Hello,
After my last patch to fix interrupt coalescing was rejected
on the basis that it is too intrusive we decided to make the fix much more localized and only fix the problem for RTC time source. Unfortunately it is impossible to fix the problem entirely inside RTC code like Andrzej proposed since Windows reads RTC register C more then once on each time interrupt so it is impossible to count reliably how many interrupt windows actually handled. Proposed solution is localized to I386 target and is disabled by default. To enable it "-rtc-td-hack" flag should be used.
hw/apic.c +22 -0
@@ -100,6 +100,8 @@ struct IOAPICState {static int apic_io_memory;static APICState *local_apics[MAX_APICS +1 ];static int last_apic_id =0 ; +static int apic_irq_delivered; +static void apic_init_ipi (APICState *s);static void apic_set_irq (APICState *s,int vector_num,int trigger_mode);
@@ -133,6 +135,14 @@ static inline void reset_bit(uint32_t *tab, int index) tab[i] &= ~mask; } +static inline int get_bit (uint32_t *tab,int index) +{ +int i, mask; + i = index >>5 ; + mask =1 << (index &0x1f ); +return !!(tab[i] & mask); +} +static void apic_local_deliver (CPUState *env,int vector) {APICState *s = env->apic_state;
@@ -349,8 +359,20 @@ static void apic_update_irq(APICState *s)cpu_interrupt (s->cpu_env,CPU_INTERRUPT_HARD ); } +void apic_reset_irq_delivered (void ) +{ + apic_irq_delivered =0 ; +} + +int apic_get_irq_delivered (void ) +{ +return apic_irq_delivered; +} +static void apic_set_irq (APICState *s,int vector_num,int trigger_mode) { + apic_irq_delivered += !get_bit (s->irr, vector_num); +set_bit (s->irr, vector_num);if (trigger_mode)set_bit (s->tmr, vector_num);
hw/mc146818rtc.c +55 -0
102 lines not on this page · raw message
hw/pc.h +2 -0
@@ -46,6 +46,8 @@ void apic_deliver_pic_intr(CPUState *env, int level);int apic_get_interrupt (CPUState *env);IOAPICState *ioapic_init (void );void ioapic_set_irq (void *opaque,int vector,int level); +void apic_reset_irq_delivered (void ); +int apic_get_irq_delivered (void );/* i8254.c */
sysemu.h +1 -0
@@ -89,6 +89,7 @@ extern int graphic_depth;extern int nographic;extern const char *keyboard_layout;extern int win2k_install_hack; +extern int rtc_td_hack;extern int alt_grab;extern int usb_enabled;extern int smp_cpus;
vl.c +7 -0
@@ -220,6 +220,7 @@ CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];#ifdef TARGET_I386 int win2k_install_hack =0 ;#endif +int rtc_td_hack =0 ;int usb_enabled =0 ;int smp_cpus =1 ;const char *vnc_display;
@@ -3869,6 +3870,7 @@ static void help(int exitcode)#ifdef TARGET_I386 "-win2k-hack use it when installing Windows 2000 to avoid a disk full bug\n" #endif +"-rtc-td-hack use it to fix time drift in Windows ACPI HAL\n" "-usb enable the USB driver (will be the default soon)\n" "-usbdevice name add the host or guest USB device 'name'\n"#if defined(TARGET_PPC ) || defined(TARGET_SPARC )
@@ -4062,6 +4064,7 @@ enum { QEMU_OPTION_kernel_kqemu, QEMU_OPTION_enable_kvm, QEMU_OPTION_win2k_hack, + QEMU_OPTION_rtc_td_hack, QEMU_OPTION_usb, QEMU_OPTION_usbdevice, QEMU_OPTION_smp,
@@ -4169,6 +4172,7 @@ static const QEMUOption qemu_options[] = {#endif { "pidfile", HAS_ARG, QEMU_OPTION_pidfile }, { "win2k-hack", 0, QEMU_OPTION_win2k_hack }, + { "rtc-td-hack", 0, QEMU_OPTION_rtc_td_hack }, { "usbdevice", HAS_ARG, QEMU_OPTION_usbdevice }, { "smp", HAS_ARG, QEMU_OPTION_smp }, { "vnc", HAS_ARG, QEMU_OPTION_vnc },
@@ -4976,6 +4980,9 @@ int main(int argc, char **argv, char **envp) win2k_install_hack =1 ;break ;#endif +case QEMU_OPTION_rtc_td_hack: + rtc_td_hack =1 ; +break ;#ifdef USE_KQEMU case QEMU_OPTION_no_kqemu: kqemu_allowed =0 ;
--
Gleb.
Quoted 11 lines · Gleb Natapov
Hello,
After my last patch to fix interrupt coalescing was rejected
on the basis that it is too intrusive we decided to make the fix much more localized and only fix the problem for RTC time source. Unfortunately it is impossible to fix the problem entirely inside RTC code like Andrzej proposed since Windows reads RTC register C more then once on each time interrupt so it is impossible to count reliably how many interrupt windows actually handled. Proposed solution is localized to I386 target and is disabled by default. To enable it "-rtc-td-hack" flag should be used.
You need documentation for the new option.
Paul
Quoted 13 lines · Paul Brook
Quoted 11 lines · Gleb Natapov
Hello,
After my last patch to fix interrupt coalescing was rejected
on the basis that it is too intrusive we decided to make the fix much more localized and only fix the problem for RTC time source. Unfortunately it is impossible to fix the problem entirely inside RTC code like Andrzej proposed since Windows reads RTC register C more then once on each time interrupt so it is impossible to count reliably how many interrupt windows actually handled. Proposed solution is localized to I386 target and is disabled by default. To enable it "-rtc-td-hack" flag should be used.
Quoted 2 lines
You need documentation for the new option.
Will add to the next patch.
--
Gleb.
Quoted 14 lines · Gleb Natapov
Quoted 13 lines · Paul Brook
Quoted 11 lines · Gleb Natapov
Hello,
After my last patch to fix interrupt coalescing was rejected
on the basis that it is too intrusive we decided to make the fix much more localized and only fix the problem for RTC time source. Unfortunately it is impossible to fix the problem entirely inside RTC code like Andrzej proposed since Windows reads RTC register C more then once on each time interrupt so it is impossible to count reliably how many interrupt windows actually handled. Proposed solution is localized to I386 target and is disabled by default. To enable it "-rtc-td-hack" flag should be used.
Quoted 4 lines
Quoted 2 lines
You need documentation for the new option.
Will add to the next patch.
Here is the same patch with doc section.
hw/apic.c +22 -0
@@ -100,6 +100,8 @@ struct IOAPICState {static int apic_io_memory;static APICState *local_apics[MAX_APICS +1 ];static int last_apic_id =0 ; +static int apic_irq_delivered; +static void apic_init_ipi (APICState *s);static void apic_set_irq (APICState *s,int vector_num,int trigger_mode);
@@ -133,6 +135,14 @@ static inline void reset_bit(uint32_t *tab, int index) tab[i] &= ~mask; } +static inline int get_bit (uint32_t *tab,int index) +{ +int i, mask; + i = index >>5 ; + mask =1 << (index &0x1f ); +return !!(tab[i] & mask); +} +static void apic_local_deliver (CPUState *env,int vector) {APICState *s = env->apic_state;
@@ -349,8 +359,20 @@ static void apic_update_irq(APICState *s)cpu_interrupt (s->cpu_env,CPU_INTERRUPT_HARD ); } +void apic_reset_irq_delivered (void ) +{ + apic_irq_delivered =0 ; +} + +int apic_get_irq_delivered (void ) +{ +return apic_irq_delivered; +} +static void apic_set_irq (APICState *s,int vector_num,int trigger_mode) { + apic_irq_delivered += !get_bit (s->irr, vector_num); +set_bit (s->irr, vector_num);if (trigger_mode)set_bit (s->tmr, vector_num);
hw/mc146818rtc.c +55 -0
102 lines not on this page · raw message
hw/pc.h +2 -0
@@ -46,6 +46,8 @@ void apic_deliver_pic_intr(CPUState *env, int level);int apic_get_interrupt (CPUState *env);IOAPICState *ioapic_init (void );void ioapic_set_irq (void *opaque,int vector,int level); +void apic_reset_irq_delivered (void ); +int apic_get_irq_delivered (void );/* i8254.c */
qemu-doc.texi +5 -0
@@ -418,6 +418,11 @@ Use it when installing Windows 2000 to avoid a disk full bug. After Windows 2000 is installed, you no longer need this option (this option slows down the IDE transfers). +@item -rtc-td-hack +Use it if you experience time drift problem in Windows with ACPI HAL. +This option will try to figure out how many timer interrupts were not +processed by the Windows guest and will re-inject them. + @item -option-rom @var{file} Load the contents of @var{file} as an option ROM. This option is useful to load things like EtherBoot.
sysemu.h +1 -0
@@ -89,6 +89,7 @@ extern int graphic_depth;extern int nographic;extern const char *keyboard_layout;extern int win2k_install_hack; +extern int rtc_td_hack;extern int alt_grab;extern int usb_enabled;extern int smp_cpus;
vl.c +7 -0
@@ -220,6 +220,7 @@ CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];#ifdef TARGET_I386 int win2k_install_hack =0 ;#endif +int rtc_td_hack =0 ;int usb_enabled =0 ;int smp_cpus =1 ;const char *vnc_display;
@@ -3869,6 +3870,7 @@ static void help(int exitcode)#ifdef TARGET_I386 "-win2k-hack use it when installing Windows 2000 to avoid a disk full bug\n" #endif +"-rtc-td-hack use it to fix time drift in Windows ACPI HAL\n" "-usb enable the USB driver (will be the default soon)\n" "-usbdevice name add the host or guest USB device 'name'\n"#if defined(TARGET_PPC ) || defined(TARGET_SPARC )
@@ -4062,6 +4064,7 @@ enum { QEMU_OPTION_kernel_kqemu, QEMU_OPTION_enable_kvm, QEMU_OPTION_win2k_hack, + QEMU_OPTION_rtc_td_hack, QEMU_OPTION_usb, QEMU_OPTION_usbdevice, QEMU_OPTION_smp,
@@ -4169,6 +4172,7 @@ static const QEMUOption qemu_options[] = {#endif { "pidfile", HAS_ARG, QEMU_OPTION_pidfile }, { "win2k-hack", 0, QEMU_OPTION_win2k_hack }, + { "rtc-td-hack", 0, QEMU_OPTION_rtc_td_hack }, { "usbdevice", HAS_ARG, QEMU_OPTION_usbdevice }, { "smp", HAS_ARG, QEMU_OPTION_smp }, { "vnc", HAS_ARG, QEMU_OPTION_vnc },
@@ -4976,6 +4980,9 @@ int main(int argc, char **argv, char **envp) win2k_install_hack =1 ;break ;#endif +case QEMU_OPTION_rtc_td_hack: + rtc_td_hack =1 ; +break ;#ifdef USE_KQEMU case QEMU_OPTION_no_kqemu: kqemu_allowed =0 ;
--
Gleb.
Quoted 16 lines · Gleb Natapov
#ifdef
TARGET_I386
intwin2k_install_hack= 0;
#endif
+intrtc_td_hack= 0;#ifdef
TARGET_I386
"-win2k-hack use it when installing Windows 2000 to avoid a disk full bug\n"
#endif
+ "-rtc-td-hack use it to fix time drift in Windows ACPI HAL\n"
QEMU_OPTION_win2k_hack,
+QEMU_OPTION_rtc_td_hack,{ "win2k-hack", 0, QEMU_OPTION_win2k_hack },+ { "rtc-td-hack", 0,
QEMU_OPTION_rtc_td_hack},
Quoted 7 lines
win2k_install_hack = 1; break;#endif
+ caseQEMU_OPTION_rtc_td_hack:
+rtc_td_hack= 1;
+ break;
#ifdefUSE_KQEMU
Like win2k-hack, the code and variable definitions should be conditional to TARGET_I386, just by moving the #endif a few lines.
hw/mc146818rtc.c RTCState *rtc_init(int base, qemu_irq irq) · line 538
Quoted 12 lines · Gleb Natapov
hw/mc146818rtc.c +4
-0+RTCState *rtc_init (int base,qemu_irq irq) {RTCState *s;@@ -483,6 +532,9 @@ RTCState *rtc_init(int base, qemu_irq irq)register_ioport_read (base,2 ,1 , cmos_ioport_read, s);register_savevm ("mc146818rtc" , base,1 , rtc_save, rtc_load, s); +#ifdef TARGET_I386 +register_savevm ("mc146818rtc-td" , base,1 , rtc_save_td, rtc_load_td, s); +#endif
This should be conditional on whether TDF is enabled or not (these fields are meaningless if it's not enabled).
Modulo documentation, I think this patch is just about the best we can do. I'm inclined to commit this once you've sent out an updated patch unless anyone has major objections.
Regards,
Anthony Liguori
Quoted 4 lines
Modulo documentation, I think this patch is just about the best we can do. I'm inclined to commit this once you've sent out an updated patch unless anyone has major objections.
Here is the latest version with all comments addressed:
hw/apic.c +22 -0
@@ -100,6 +100,8 @@ struct IOAPICState {static int apic_io_memory;static APICState *local_apics[MAX_APICS +1 ];static int last_apic_id =0 ; +static int apic_irq_delivered; +static void apic_init_ipi (APICState *s);static void apic_set_irq (APICState *s,int vector_num,int trigger_mode);
@@ -133,6 +135,14 @@ static inline void reset_bit(uint32_t *tab, int index) tab[i] &= ~mask; } +static inline int get_bit (uint32_t *tab,int index) +{ +int i, mask; + i = index >>5 ; + mask =1 << (index &0x1f ); +return !!(tab[i] & mask); +} +static void apic_local_deliver (CPUState *env,int vector) {APICState *s = env->apic_state;
@@ -349,8 +359,20 @@ static void apic_update_irq(APICState *s)cpu_interrupt (s->cpu_env,CPU_INTERRUPT_HARD ); } +void apic_reset_irq_delivered (void ) +{ + apic_irq_delivered =0 ; +} + +int apic_get_irq_delivered (void ) +{ +return apic_irq_delivered; +} +static void apic_set_irq (APICState *s,int vector_num,int trigger_mode) { + apic_irq_delivered += !get_bit (s->irr, vector_num); +set_bit (s->irr, vector_num);if (trigger_mode)set_bit (s->tmr, vector_num);
hw/mc146818rtc.c +57 -0
104 lines not on this page · raw message
hw/pc.h +2 -0
@@ -46,6 +46,8 @@ void apic_deliver_pic_intr(CPUState *env, int level);int apic_get_interrupt (CPUState *env);IOAPICState *ioapic_init (void );void ioapic_set_irq (void *opaque,int vector,int level); +void apic_reset_irq_delivered (void ); +int apic_get_irq_delivered (void );/* i8254.c */
qemu-doc.texi +5 -0
@@ -418,6 +418,11 @@ Use it when installing Windows 2000 to avoid a disk full bug. After Windows 2000 is installed, you no longer need this option (this option slows down the IDE transfers). +@item -rtc-td-hack +Use it if you experience time drift problem in Windows with ACPI HAL. +This option will try to figure out how many timer interrupts were not +processed by the Windows guest and will re-inject them. + @item -option-rom @var{file} Load the contents of @var{file} as an option ROM. This option is useful to load things like EtherBoot.
sysemu.h +1 -0
@@ -89,6 +89,7 @@ extern int graphic_depth;extern int nographic;extern const char *keyboard_layout;extern int win2k_install_hack; +extern int rtc_td_hack;extern int alt_grab;extern int usb_enabled;extern int smp_cpus;
vl.c +7 -0
@@ -219,6 +219,7 @@ CharDriverState *serial_hds[MAX_SERIAL_PORTS];CharDriverState *parallel_hds[MAX_PARALLEL_PORTS ];#ifdef TARGET_I386 int win2k_install_hack =0 ; +int rtc_td_hack =0 ;#endif int usb_enabled =0 ;int smp_cpus =1 ;
@@ -3868,6 +3869,7 @@ static void help(int exitcode) "-full-screen start in full screen\n" #ifdef TARGET_I386 "-win2k-hack use it when installing Windows 2000 to avoid a disk full bug\n" + "-rtc-td-hack use it to fix time drift in Windows ACPI HAL\n" #endif"-usb enable the USB driver (will be the default soon)\n" "-usbdevice name add the host or guest USB device 'name'\n"
@@ -4062,6 +4064,7 @@ enum { QEMU_OPTION_kernel_kqemu, QEMU_OPTION_enable_kvm, QEMU_OPTION_win2k_hack, + QEMU_OPTION_rtc_td_hack, QEMU_OPTION_usb, QEMU_OPTION_usbdevice, QEMU_OPTION_smp,
@@ -4169,6 +4172,7 @@ static const QEMUOption qemu_options[] = {#endif { "pidfile", HAS_ARG, QEMU_OPTION_pidfile }, { "win2k-hack", 0, QEMU_OPTION_win2k_hack }, + { "rtc-td-hack", 0, QEMU_OPTION_rtc_td_hack }, { "usbdevice", HAS_ARG, QEMU_OPTION_usbdevice }, { "smp", HAS_ARG, QEMU_OPTION_smp }, { "vnc", HAS_ARG, QEMU_OPTION_vnc },
@@ -4975,6 +4979,9 @@ int main(int argc, char **argv, char **envp)case QEMU_OPTION_win2k_hack: win2k_install_hack =1 ;break ; +case QEMU_OPTION_rtc_td_hack: + rtc_td_hack =1 ; +break ;#endif #ifdef USE_KQEMU case QEMU_OPTION_no_kqemu:
--
Gleb.