USB change speed
PATCH 1/1 USB change speed
USB changes the speed according to the port status
Signed-off-by Michael Trimarchi <[email protected]>
---
common/usb.c +10 -2
@@ -1061,10 +1061,12 @@ static int hub_port_reset(struct usb_device *dev, int port, } portstatus =le16_to_cpu (portsts.wPortStatus); portchange =le16_to_cpu (portsts.wPortChange); +USB_HUB_PRINTF ("portstatus %x, change %x, %s\n" , portstatus, portchange, - portstatus&(1 <<USB_PORT_FEAT_LOWSPEED ) ? \ + portstatus & (1 <<USB_PORT_FEAT_LOWSPEED ) ? \"Low Speed" :"High Speed" ); + USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \ " USB_PORT_STAT_ENABLE %d\n", (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,
@@ -1136,7 +1138,13 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)/* Allocate a new device struct for it */ usb =usb_alloc_new_device (); - usb->speed = (portstatus &USB_PORT_STAT_LOW_SPEED ) ?1 :0 ; + +if (portstatus &USB_PORT_STAT_HIGH_SPEED ) + usb->speed =USB_SPEED_HIGH ; +else if (portstatus &USB_PORT_STAT_LOW_SPEED ) + usb->speed =USB_SPEED_LOW ; +else + usb->speed =USB_SPEED_FULL ; dev->children[port] = usb; usb->parent = dev;
PATCH 1/1 USB change speed
Hello Michael,
2008/12/18 Michael Trimarchi <[email protected]>:
Quoted 3 lines
USB changes the speed according to the port status
Signed-off-by Michael Trimarchi <[email protected]>
I applied this series to the u-boot-usb 'testing' branch. When it compiles properly and no regressions are being detected, I move it to the 'next' branch for the next U-boot release.
Thanks.
Remy
Quoted 36 lines
---
common/usb.c +10
-2@@ -1061,10 +1061,12 @@ static int hub_port_reset(struct usb_device *dev, int port, } portstatus =le16_to_cpu (portsts.wPortStatus); portchange =le16_to_cpu (portsts.wPortChange); +USB_HUB_PRINTF ("portstatus %x, change %x, %s\n" , portstatus, portchange, - portstatus&(1 <<USB_PORT_FEAT_LOWSPEED ) ? \ + portstatus & (1 <<USB_PORT_FEAT_LOWSPEED ) ? \"Low Speed" :"High Speed" ); + USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \ " USB_PORT_STAT_ENABLE %d\n", (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,@@ -1136,7 +1138,13 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)/* Allocate a new device struct for it */ usb =usb_alloc_new_device (); - usb->speed = (portstatus &USB_PORT_STAT_LOW_SPEED ) ?1 :0 ; + +if (portstatus &USB_PORT_STAT_HIGH_SPEED ) + usb->speed =USB_SPEED_HIGH ; +else if (portstatus &USB_PORT_STAT_LOW_SPEED ) + usb->speed =USB_SPEED_LOW ; +else + usb->speed =USB_SPEED_FULL ; dev->children[port] = usb; usb->parent = dev;