sh: add LCDC interrupt configuration to AP325 and Migo-R
PATCH 1/1 sh: add LCDC interrupt configuration to AP325 and Migo-R
From: Magnus Damm <[email protected]>
Add LCDC interrupt resources for AP325 and Migo-R. The LCDC driver does not require interrupts at this point, but changes such as one-shot SYS mode using deferred io, and wait-for-vblank will both need this.
Signed-off-by Magnus Damm <[email protected]>
---
arch/sh/boards/board-ap325rxa.c | 4 ++++ arch/sh/boards/mach-migor/setup.c | 4 ++++ 2 files changed, 8 insertions(+)
arch/sh/boards/board-ap325rxa.c +4 -0
@@ -197,6 +197,10 @@ static struct resource lcdc_resources[] .end = 0xfe941fff, .flags = IORESOURCE_MEM, }, + [1] = { + .start = 28, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device lcdc_device = {
arch/sh/boards/mach-migor/setup.c +4 -0
@@ -274,6 +274,10 @@ static struct resource migor_lcdc_resour .end = 0xfe941fff, .flags = IORESOURCE_MEM, }, + [1] = { + .start = 28, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device migor_lcdc_device = {