Skip to contentSkip to conversation

tg3: WOL fixes

PATCH Applied Matt Carlson 2 participants 2 messages Dec 19, 2008 – Dec 22, 2008

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/5 tg3: WOL fixes

The first hunk of this patch inverts a flag that was accidentally toggled as part of commit 0a459aac9d151c2e36ec65723b9b845b24c5cbc3.

The second hunk of the patch removes the call to device_may_wakeup() in the 5906 config detection path. At the point of the call, the driver shouldn't be querying for WOL capability. It should be detecting and setting it.

---
 drivers/net/tg3.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)
drivers/net/tg3.c +2 -3
index 06bd2f4..bacbfc5 100644
@@ -2237,7 +2237,7 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 			}
 		}
 	} else {
-		do_low_power = false;
+		do_low_power = true;
 
 		if (tp->link_config.phy_is_low_power == 0) {
 			tp->link_config.phy_is_low_power = 1;
@@ -11544,8 +11544,7 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 		if (val & VCPU_CFGSHDW_ASPM_DBNC)
 			tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
 		if ((val & VCPU_CFGSHDW_WOL_ENABLE) &&
-		    (val & VCPU_CFGSHDW_WOL_MAGPKT) &&
-		    device_may_wakeup(&tp->pdev->dev))
+		    (val & VCPU_CFGSHDW_WOL_MAGPKT))
 			tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
 		goto done;
 	}
Signature · 1 line
1.5.6.4
maintainer Applied
#1 lore raw

From: "Matt Carlson" <[email protected]>
Date: Wed, 17 Dec 2008 16:33:37 -0800

Quoted 11 lines

The first hunk of this patch inverts a flag that was accidentally toggled as part of commit 0a459aac9d151c2e36ec65723b9b845b24c5cbc3.

The second hunk of the patch removes the call to device_may_wakeup() in the 5906 config detection path. At the point of the call, the driver shouldn't be querying for WOL capability. It should be detecting and setting it.

Applied.