Rather high /proc/interrupts ERR count
Hi all,
Running 2.6.28 stable.
x86_64 system with AMD Athlon(tm) 64 X2 Dual Core Processor 5200+
The machine runs perfectly fine, but...
...should I be concerned with the rather high ERR count below (this is after 41 minutes uptime). I also have to boot with noapic to stop lockups (nvidia driver, I expect):
CPU0 CPU1
0: 125 1 XT-PIC-XT timer 1: 5534 97 XT-PIC-XT i8042 2: 0 0 XT-PIC-XT cascade 3: 1 0 XT-PIC-XT 4: 1 1 XT-PIC-XT 5: 78933 11713 XT-PIC-XT sata_nv, ohci_hcd:usb2, Intel ICH 6: 3 0 XT-PIC-XT floppy 7: 21189 333431 XT-PIC-XT 8: 1 0 XT-PIC-XT rtc0 9: 0 0 XT-PIC-XT acpi 10: 246562 9267 XT-PIC-XT eth0 11: 2296 72 XT-PIC-XT sata_nv, ehci_hcd:usb1, nvidia 14: 98 51 XT-PIC-XT pata_amd 15: 0 0 XT-PIC-XT pata_amd NMI: 0 0 Non-maskable interrupts LOC: 236200 234958 Local timer interrupts RES: 33224 73287 Rescheduling interrupts CAL: 890 964 Function call interrupts TLB: 982 1127 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 354616 MIS: 0
Signature · 2 lines
Free Software Foundation Associate Member 5508 http://linicks.net/
Quoted 29 lines · Nick Warne
Hi all,
Running 2.6.28 stable.
x86_64system with AMD Athlon(tm) 64 X2 Dual Core Processor 5200+The machine runs perfectly fine, but...
...should I be concerned with the rather high ERR count below (this is after 41 minutes uptime). I also have to boot with noapic to stop lockups (nvidia driver, I expect):
CPU0 CPU1
0: 125 1 XT-PIC-XT timer 1: 5534 97 XT-PIC-XT i8042 2: 0 0 XT-PIC-XT cascade 3: 1 0 XT-PIC-XT 4: 1 1 XT-PIC-XT 5: 78933 11713 XT-PIC-XT sata_nv, ohci_hcd:usb2, Intel ICH 6: 3 0 XT-PIC-XT floppy 7: 21189 333431 XT-PIC-XT 8: 1 0 XT-PIC-XT rtc0 9: 0 0 XT-PIC-XT acpi 10: 246562 9267 XT-PIC-XT eth0 11: 2296 72 XT-PIC-XT sata_nv, ehci_hcd:usb1, nvidia 14: 98 51 XT-PIC-XT pata_amd 15: 0 0 XT-PIC-XT pata_amd NMI: 0 0 Non-maskable interrupts LOC: 236200 234958 Local timer interrupts
Quoted 8 lines
RES: 33224 73287 Rescheduling interrupts CAL: 890 964 Function call interrupts TLB: 982 1127 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 354616 MIS: 0
21189+333431 = 354620
So virtually all of the ERR's are from IRQ7,
which is how the PIC identifies interrupts
when it has no idea of the real source.
The PIC actually doesn't have a concept of directing interrupts to non CPU0, and the fact that CPU1
on this box thinks it receives some of the interrupts is in the undocumented area known as "implementation specific" or maybe stated as "don't do this at home".
So the better thing to focus on would be how to get rid of "noapic" on your cmdline and get the system into IOAPIC mode, as it was designed to be.
-- Len Brown, Intel Open Source Technology Center>
Quoted 18 lines · On Sun, 28 Dec 2008 22:39:32 -0500 (EST) Len Brown <[email protected]> wrote:
Quoted 2 lines · Nick Warne
ERR: 354616 MIS: 021189+333431 = 354620
So virtually all of the ERR's are from IRQ7,
which is how the PIC identifies interrupts
when it has no idea of the real source.The PIC actually doesn't have a concept of directing interrupts to non CPU0, and the fact that CPU1
on this box thinks it receives some of the interrupts is in the undocumented area known as "implementation specific" or maybe stated as "don't do this at home".
Quoted 3 lines
So the better thing to focus on would be how to get rid of "noapic" on your cmdline and get the system into IOAPIC mode, as it was designed to be.
Thanks Len - you explained it to me perfectly, and as suggested:
CPU0 CPU1
0: 121 494 IO-APIC-edge timer 1: 17 20796 IO-APIC-edge i8042 6: 0 3 IO-APIC-edge floppy 7: 1 0 IO-APIC-edge 8: 0 1 IO-APIC-edge rtc0 9: 0 0 IO-APIC-fasteoi acpi 14: 2 139 IO-APIC-edge pata_amd 15: 0 0 IO-APIC-edge pata_amd 16: 86 85163 IO-APIC-fasteoi nvidia 20: 0 4 IO-APIC-fasteoi ehci_hcd:usb1 21: 0 0 IO-APIC-fasteoi sata_nv 22: 570 404175 IO-APIC-fasteoi sata_nv, Intel ICH 23: 1236 8996739 IO-APIC-fasteoi ohci_hcd:usb2, eth0 NMI: 0 0 Non-maskable interrupts LOC: 4497869 5381066 Local timer interrupts RES: 999249 570052 Rescheduling interrupts CAL: 105254 112444 Function call interrupts TLB: 14640 6594 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 1 MIS: 0
Now appears fine (I get one ERR at boot, for some reason).
Thanks for the information.
Nick
Signature · 2 lines
Free Software Foundation Associate Member 5508 http://linicks.net/