Skip to contentSkip to conversation

IDE updates part 1

GIT PULL Bartlomiej Zolnierkiewicz 1 participant 1 message Dec 29, 2008

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Inside:

* Fix for IDE ACPI regression breaking suspend on some machines (kernel.org bug #12279).

* tx493[89]ide host drivers fixes (from Atsushi Nemoto).

* Locking sanitizations/improvements.

* Replacement of global ide_lock by per-hwgroup locks (based on previous patch from Ravikiran G Thirumalai).

* Misc fixes and housekeeping patches...

All patches have been in linux-next tree for few weeks now (except regression fix and tx493[89] fixes but they're all obviously correct).

Linus, please pull from:

master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/

to receive the following updates:

 drivers/ide/Kconfig        |    8 ++
 drivers/ide/Makefile       |    3 +-
 drivers/ide/cmd64x.c       |    4 +-
 drivers/ide/cy82c693.c     |    1 -
 drivers/ide/gayle.c        |    6 +-
 drivers/ide/hpt366.c       |    8 +-
 drivers/ide/ide-acpi.c     |    4 +-
 drivers/ide/ide-cd.c       |  142 ++++-----------------
 drivers/ide/ide-cd.h       |    2 -
 drivers/ide/ide-dma-sff.c  |   54 ++++-----
 drivers/ide/ide-io.c       |  292 ++++++++------------------------------------
 drivers/ide/ide-ioctls.c   |    5 +-
 drivers/ide/ide-iops.c     |   48 ++++----
 drivers/ide/ide-legacy.c   |   58 +++++++++
 drivers/ide/ide-lib.c      |  105 ++++++++--------
 drivers/ide/ide-park.c     |   16 ++--
 drivers/ide/ide-pm.c       |  235 +++++++++++++++++++++++++++++++++++
 drivers/ide/ide-probe.c    |  166 +++++--------------------
 drivers/ide/ide-proc.c     |   29 +----
 drivers/ide/ide.c          |   89 +-------------
 drivers/ide/pdc202xx_old.c |    9 +-
 drivers/ide/rz1000.c       |   36 ++++--
 drivers/ide/trm290.c       |    4 +-
 drivers/ide/tx4938ide.c    |    4 +-
 drivers/ide/tx4939ide.c    |   10 ++-
 drivers/ide/umc8672.c      |   11 +-
 drivers/scsi/ide-scsi.c    |   32 +++--
 include/linux/ide.h        |   37 +++---
 28 files changed, 635 insertions(+), 783 deletions(-)
 create mode 100644 drivers/ide/ide-legacy.c
 create mode 100644 drivers/ide/ide-pm.c

Atsushi Nemoto (2):
tx4939ide: Do not use zero count PRD entry tx493[89]ide: Fix length for __ide_flush_dcache_range

Bartlomiej Zolnierkiewicz (30):
ide: fix IDE ACPI regression breaking suspend
ide: unify ide_intr()'s exit points
ide: IDE settings don't need an ide_lock held
ide: __ide_port_unregister_devices() doesn't need an ide_lock held
ide: ide_hwgroup_t.rq doesn't need an ide_lock held
ide: push ide_lock to __ide_end_request()
ide: ide_lock + __blk_end_request() -> blk_end_request()
ide: use queue lock instead of ide_lock when possible
ide: replace the global ide_lock spinlock by per-hwgroup spinlocks (v2)
ide: cleanup ide_do_request()
ide-cd: remove obsolete seek optimization
ali14xx: doesn't use shared IRQs
cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
gayle: set IDE_HFLAG_SERIALIZE explictly
ide: fix ->quirk_list checking in ide_do_request()
ide: always set nIEN on idle devices
rz1000: apply chipset quirks early (v2)
ide: add ->max_sectors field to struct ide_port_info
trm290: add IDE_HFLAG_TRM290 host flag
cy82c693: remove superfluous ide_cy82c693 chipset type
ide: rework handling of serialized ports (v2)
ide: remove redundant code from ide_end_drive_cmd()
ide: remove inline tags from ide-probe.c
ide: checkpatch.pl fixes for ide-lib.c
ide: use ATA_DMA_* defines in ide-dma-sff.c
ide: move Power Management support to ide-pm.c
ide: move legacy ISA/VLB ports handling to ide-legacy.c (v2)
ide: remove superfluous local_irq_{save,restore}() from ide_dump_status()
ide: push local_irq_{save,restore}() to do_identify()
ide-cd: remove dead dsc_overlap setting

Kay Sievers (1):
ide: struct device - replace bus_id with dev_name(), dev_set_name()

drivers/ide/Kconfig +8 -0
index e6857e0..7a0a84b 100644
@@ -62,6 +62,9 @@ config IDE_TIMINGS
 config IDE_ATAPI
 	bool
 
+config IDE_LEGACY
+	bool
+
 config BLK_DEV_IDE_SATA
 	bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
 	default n
@@ -856,6 +859,7 @@ config BLK_DEV_4DRIVES
 config BLK_DEV_ALI14XX
 	tristate "ALI M14xx support"
 	select IDE_TIMINGS
+	select IDE_LEGACY
 	help
 	  This driver is enabled at runtime using the "ali14xx.probe" kernel
 	  boot parameter.  It enables support for the secondary IDE interface
@@ -866,6 +870,7 @@ config BLK_DEV_ALI14XX
 
 config BLK_DEV_DTC2278
 	tristate "DTC-2278 support"
+	select IDE_LEGACY
 	help
 	  This driver is enabled at runtime using the "dtc2278.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
@@ -876,6 +881,7 @@ config BLK_DEV_DTC2278
 config BLK_DEV_HT6560B
 	tristate "Holtek HT6560B support"
 	select IDE_TIMINGS
+	select IDE_LEGACY
 	help
 	  This driver is enabled at runtime using the "ht6560b.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
@@ -886,6 +892,7 @@ config BLK_DEV_HT6560B
 config BLK_DEV_QD65XX
 	tristate "QDI QD65xx support"
 	select IDE_TIMINGS
+	select IDE_LEGACY
 	help
 	  This driver is enabled at runtime using the "qd65xx.probe" kernel
 	  boot parameter.  It permits faster I/O speeds to be set.  See the
@@ -894,6 +901,7 @@ config BLK_DEV_QD65XX
 
 config BLK_DEV_UMC8672
 	tristate "UMC-8672 support"
+	select IDE_LEGACY
 	help
 	  This driver is enabled at runtime using the "umc8672.probe" kernel
 	  boot parameter. It enables support for the secondary IDE interface
drivers/ide/Makefile +2 -1
index 7818d40..177e3f8 100644
@@ -5,7 +5,7 @@
 EXTRA_CFLAGS				+= -Idrivers/ide
 
 ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
-	      ide-taskfile.o ide-park.o ide-pio-blacklist.o
+	      ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o
 
 # core IDE code
 ide-core-$(CONFIG_IDE_TIMINGS)		+= ide-timings.o
@@ -15,6 +15,7 @@ ide-core-$(CONFIG_BLK_DEV_IDEDMA)	+= ide-dma.o
 ide-core-$(CONFIG_BLK_DEV_IDEDMA_SFF)	+= ide-dma-sff.o
 ide-core-$(CONFIG_IDE_PROC_FS)		+= ide-proc.o
 ide-core-$(CONFIG_BLK_DEV_IDEACPI)	+= ide-acpi.o
+ide-core-$(CONFIG_IDE_LEGACY)		+= ide-legacy.o
 
 obj-$(CONFIG_IDE)			+= ide-core.o
 
drivers/ide/cmd64x.c +2 -2
index 935385c..3623bf0 100644
@@ -424,10 +424,10 @@ static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
 		.name		= DRV_NAME,
 		.init_chipset	= init_chipset_cmd64x,
 		.enablebits	= {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
-		.chipset	= ide_cmd646,
 		.port_ops	= &cmd64x_port_ops,
 		.dma_ops	= &cmd648_dma_ops,
-		.host_flags	= IDE_HFLAG_ABUSE_PREFETCH,
+		.host_flags	= IDE_HFLAG_SERIALIZE |
+				  IDE_HFLAG_ABUSE_PREFETCH,
 		.pio_mask	= ATA_PIO5,
 		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA2,
drivers/ide/cy82c693.c +0 -1
index 5297f07..d37baf8 100644
@@ -292,7 +292,6 @@ static const struct ide_port_info cy82c693_chipset __devinitdata = {
 	.name		= DRV_NAME,
 	.init_iops	= init_iops_cy82c693,
 	.port_ops	= &cy82c693_port_ops,
-	.chipset	= ide_cy82c693,
 	.host_flags	= IDE_HFLAG_SINGLE,
 	.pio_mask	= ATA_PIO4,
 	.swdma_mask	= ATA_SWDMA2,
drivers/ide/gayle.c +5 -1
index 6915068..59bd0be 100644
@@ -117,6 +117,10 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
 	hw->chipset = ide_generic;
 }
 
+static const struct ide_port_info gayle_port_info = {
+	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA,
+};
+
     /*
      *  Probe for a Gayle IDE interface (and optionally for an IDE doubler)
      */
@@ -178,7 +182,7 @@ found:
 	hws[i] = &hw[i];
     }
 
-    rc = ide_host_add(NULL, hws, NULL);
+    rc = ide_host_add(&gayle_port_info, hws, NULL);
     if (rc)
 	release_mem_region(res_start, res_n);
 
drivers/ide/hpt366.c +1 -7
index f5afd46..b18e10d 100644
@@ -135,7 +135,6 @@
 /* various tuning parameters */
 #define HPT_RESET_STATE_ENGINE
 #undef	HPT_DELAY_INTERRUPT
-#define HPT_SERIALIZE_IO	0
 
 static const char *quirk_drives[] = {
 	"QUANTUM FIREBALLlct08 08",
@@ -1288,7 +1287,6 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
 static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 {
 	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
-	int serialize		= HPT_SERIALIZE_IO;
 	u8  chip_type		= info->chip_type;
 
 	/* Cache the channel's MISC. control registers' offset */
@@ -1305,13 +1303,9 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 		 * Clock is shared between the channels,
 		 * so we'll have to serialize them... :-(
 		 */
-		serialize = 1;
+		hwif->host->host_flags |= IDE_HFLAG_SERIALIZE;
 		hwif->rw_disk = &hpt3xxn_rw_disk;
 	}
-
-	/* Serialize access to this device if needed */
-	if (serialize && hwif->mate)
-		hwif->serialized = hwif->mate->serialized = 1;
 }
 
 static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
drivers/ide/ide-acpi.c +2 -2
index 244a8a0..fd4a364 100644
@@ -615,10 +615,10 @@ void ide_acpi_push_timing(ide_hwif_t *hwif)
 	in_params[0].buffer.length = sizeof(struct GTM_buffer);
 	in_params[0].buffer.pointer = (u8 *)&hwif->acpidata->gtm;
 	in_params[1].type = ACPI_TYPE_BUFFER;
-	in_params[1].buffer.length = sizeof(ATA_ID_WORDS * 2);
+	in_params[1].buffer.length = ATA_ID_WORDS * 2;
 	in_params[1].buffer.pointer = (u8 *)&master->idbuff;
 	in_params[2].type = ACPI_TYPE_BUFFER;
-	in_params[2].buffer.length = sizeof(ATA_ID_WORDS * 2);
+	in_params[2].buffer.length = ATA_ID_WORDS * 2;
 	in_params[2].buffer.pointer = (u8 *)&slave->idbuff;
 	/* Output buffer: _STM has no output */
 
drivers/ide/ide-cd.c +26 -116

244 lines not on this page · raw message

drivers/ide/ide-cd.h +0 -2
index 5882b9a..d5ce336 100644
@@ -88,8 +88,6 @@ struct cdrom_info {
 	struct request_sense sense_data;
 
 	struct request request_sense_request;
-	unsigned long last_block;
-	unsigned long start_seek;
 
 	u8 max_speed;		/* Max speed of the drive. */
 	u8 current_speed;	/* Current speed of the drive. */
drivers/ide/ide-dma-sff.c +24 -30

131 lines not on this page · raw message

drivers/ide/ide-io.c +53 -239

488 lines not on this page · raw message

drivers/ide/ide-ioctls.c +1 -4
index fcde16b..28232c6 100644
@@ -19,7 +19,6 @@ int ide_setting_ioctl(ide_drive_t *drive, struct block_device *bdev,
 		      const struct ide_ioctl_devset *s)
 {
 	const struct ide_devset *ds;
-	unsigned long flags;
 	int err = -EOPNOTSUPP;
 
 	for (; (ds = s->setting); s++) {
@@ -33,9 +32,7 @@ int ide_setting_ioctl(ide_drive_t *drive, struct block_device *bdev,
 
 read_val:
 	mutex_lock(&ide_setting_mtx);
-	spin_lock_irqsave(&ide_lock, flags);
 	err = ds->get(drive);
-	spin_unlock_irqrestore(&ide_lock, flags);
 	mutex_unlock(&ide_setting_mtx);
 	return err >= 0 ? put_user(err, (long __user *)arg) : err;
 
@@ -98,7 +95,7 @@ static int ide_set_nice_ioctl(ide_drive_t *drive, unsigned long arg)
 		return -EPERM;
 
 	if (((arg >> IDE_NICE_DSC_OVERLAP) & 1) &&
-	    (drive->media == ide_disk || drive->media == ide_floppy ||
+	    (drive->media != ide_tape ||
 	     (drive->dev_flags & IDE_DFLAG_SCSI)))
 		return -EPERM;
 
drivers/ide/ide-iops.c +23 -25

114 lines not on this page · raw message

drivers/ide/ide-legacy.c new file +58 -0

58 lines not on this page · raw message

drivers/ide/ide-lib.c +55 -50

203 lines not on this page · raw message

drivers/ide/ide-park.c +8 -8
index 03b00e5..63d01c5 100644
@@ -7,17 +7,16 @@ DECLARE_WAIT_QUEUE_HEAD(ide_park_wq);
 
 static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout)
 {
+	ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
 	struct request_queue *q = drive->queue;
 	struct request *rq;
 	int rc;
 
 	timeout += jiffies;
-	spin_lock_irq(&ide_lock);
+	spin_lock_irq(&hwgroup->lock);
 	if (drive->dev_flags & IDE_DFLAG_PARKED) {
-		ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
-		int reset_timer;
+		int reset_timer = time_before(timeout, drive->sleep);
 
-		reset_timer = time_before(timeout, drive->sleep);
 		drive->sleep = timeout;
 		wake_up_all(&ide_park_wq);
 		if (reset_timer && hwgroup->sleeping &&
@@ -26,10 +25,10 @@ static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout)
 			hwgroup->busy = 0;
 			blk_start_queueing(q);
 		}
-		spin_unlock_irq(&ide_lock);
+		spin_unlock_irq(&hwgroup->lock);
 		return;
 	}
-	spin_unlock_irq(&ide_lock);
+	spin_unlock_irq(&hwgroup->lock);
 
 	rq = blk_get_request(q, READ, __GFP_WAIT);
 	rq->cmd[0] = REQ_PARK_HEADS;
@@ -62,20 +61,21 @@ ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
 		      char *buf)
 {
 	ide_drive_t *drive = to_ide_device(dev);
+	ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
 	unsigned long now;
 	unsigned int msecs;
 
 	if (drive->dev_flags & IDE_DFLAG_NO_UNLOAD)
 		return -EOPNOTSUPP;
 
-	spin_lock_irq(&ide_lock);
+	spin_lock_irq(&hwgroup->lock);
 	now = jiffies;
 	if (drive->dev_flags & IDE_DFLAG_PARKED &&
 	    time_after(drive->sleep, now))
 		msecs = jiffies_to_msecs(drive->sleep - now);
 	else
 		msecs = 0;
-	spin_unlock_irq(&ide_lock);
+	spin_unlock_irq(&hwgroup->lock);
 
 	return snprintf(buf, 20, "%u\n", msecs);
 }
drivers/ide/ide-pm.c new file +235 -0

235 lines not on this page · raw message

drivers/ide/ide-probe.c +34 -132

311 lines not on this page · raw message

drivers/ide/ide-proc.c +4 -25
index f3cddd1..a14e293 100644
@@ -46,10 +46,6 @@ static int proc_ide_read_imodel
 	case ide_qd65xx:	name = "qd65xx";	break;
 	case ide_umc8672:	name = "umc8672";	break;
 	case ide_ht6560b:	name = "ht6560b";	break;
-	case ide_rz1000:	name = "rz1000";	break;
-	case ide_trm290:	name = "trm290";	break;
-	case ide_cmd646:	name = "cmd646";	break;
-	case ide_cy82c693:	name = "cy82c693";	break;
 	case ide_4drives:	name = "4drives";	break;
 	case ide_pmac:		name = "mac-io";	break;
 	case ide_au1xxx:	name = "au1xxx";	break;
@@ -155,13 +151,8 @@ static int ide_read_setting(ide_drive_t *drive,
 	const struct ide_devset *ds = setting->setting;
 	int val = -EINVAL;
 
-	if (ds->get) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&ide_lock, flags);
+	if (ds->get)
 		val = ds->get(drive);
-		spin_unlock_irqrestore(&ide_lock, flags);
-	}
 
 	return val;
 }
@@ -583,31 +574,19 @@ EXPORT_SYMBOL(ide_proc_register_driver);
  *	Clean up the driver specific /proc files and IDE settings
  *	for a given drive.
  *
- *	Takes ide_setting_mtx and ide_lock.
- *	Caller must hold none of the locks.
+ *	Takes ide_setting_mtx.
  */
 
 void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
 {
-	unsigned long flags;
-
 	ide_remove_proc_entries(drive->proc, driver->proc_entries(drive));
 
 	mutex_lock(&ide_setting_mtx);
-	spin_lock_irqsave(&ide_lock, flags);
 	/*
-	 * ide_setting_mtx protects the settings list
-	 * ide_lock protects the use of settings
-	 *
-	 * so we need to hold both, ide_settings_sem because we want to
-	 * modify the settings list, and ide_lock because we cannot take
-	 * a setting out that is being used.
-	 *
-	 * OTOH both ide_{read,write}_setting are only ever used under
-	 * ide_setting_mtx.
+	 * ide_setting_mtx protects both the settings list and the use
+	 * of settings (we cannot take a setting out that is being used).
 	 */
 	drive->settings = NULL;
-	spin_unlock_irqrestore(&ide_lock, flags);
 	mutex_unlock(&ide_setting_mtx);
 }
 EXPORT_SYMBOL(ide_proc_unregister_driver);
drivers/ide/ide.c +3 -86

147 lines not on this page · raw message

drivers/ide/pdc202xx_old.c +5 -4
index 799557c..624e62e 100644
@@ -350,16 +350,17 @@ static const struct ide_dma_ops pdc2026x_dma_ops = {
 	.dma_timeout		= pdc202xx_dma_timeout,
 };
 
-#define DECLARE_PDC2026X_DEV(udma, extra_flags) \
+#define DECLARE_PDC2026X_DEV(udma, sectors) \
 	{ \
 		.name		= DRV_NAME, \
 		.init_chipset	= init_chipset_pdc202xx, \
 		.port_ops	= &pdc2026x_port_ops, \
 		.dma_ops	= &pdc2026x_dma_ops, \
-		.host_flags	= IDE_HFLAGS_PDC202XX | extra_flags, \
+		.host_flags	= IDE_HFLAGS_PDC202XX, \
 		.pio_mask	= ATA_PIO4, \
 		.mwdma_mask	= ATA_MWDMA2, \
 		.udma_mask	= udma, \
+		.max_sectors	= sectors, \
 	}
 
 static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
@@ -376,8 +377,8 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
 
 	/* 1: PDC2026{2,3} */
 	DECLARE_PDC2026X_DEV(ATA_UDMA4, 0),
-	/* 2: PDC2026{5,7} */
-	DECLARE_PDC2026X_DEV(ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
+	/* 2: PDC2026{5,7}: UDMA5, limit LBA48 requests to 256 sectors */
+	DECLARE_PDC2026X_DEV(ATA_UDMA5, 256),
 };
 
 /**
drivers/ide/rz1000.c +25 -11
index 7daf013..a6414a8 100644
@@ -22,34 +22,48 @@
 
 #define DRV_NAME "rz1000"
 
-static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
+static int __devinit rz1000_disable_readahead(struct pci_dev *dev)
 {
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u16 reg;
 
 	if (!pci_read_config_word (dev, 0x40, &reg) &&
 	    !pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
 		printk(KERN_INFO "%s: disabled chipset read-ahead "
-			"(buggy RZ1000/RZ1001)\n", hwif->name);
+			"(buggy RZ1000/RZ1001)\n", pci_name(dev));
+		return 0;
 	} else {
-		if (hwif->mate)
-			hwif->mate->serialized = hwif->serialized = 1;
-		hwif->host_flags |= IDE_HFLAG_NO_UNMASK_IRQS;
 		printk(KERN_INFO "%s: serialized, disabled unmasking "
-			"(buggy RZ1000/RZ1001)\n", hwif->name);
+			"(buggy RZ1000/RZ1001)\n", pci_name(dev));
+		return 1;
 	}
 }
 
 static const struct ide_port_info rz1000_chipset __devinitdata = {
 	.name		= DRV_NAME,
-	.init_hwif	= init_hwif_rz1000,
-	.chipset	= ide_rz1000,
 	.host_flags	= IDE_HFLAG_NO_DMA,
 };
 
 static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_pci_init_one(dev, &rz1000_chipset, NULL);
+	struct ide_port_info d = rz1000_chipset;
+	int rc;
+
+	rc = pci_enable_device(dev);
+	if (rc)
+		return rc;
+
+	if (rz1000_disable_readahead(dev)) {
+		d.host_flags |= IDE_HFLAG_SERIALIZE;
+		d.host_flags |= IDE_HFLAG_NO_UNMASK_IRQS;
+	}
+
+	return ide_pci_init_one(dev, &d, NULL);
+}
+
+static void rz1000_remove(struct pci_dev *dev)
+{
+	ide_pci_remove(dev);
+	pci_disable_device(dev);
 }
 
 static const struct pci_device_id rz1000_pci_tbl[] = {
@@ -63,7 +77,7 @@ static struct pci_driver rz1000_pci_driver = {
 	.name		= "RZ1000_IDE",
 	.id_table	= rz1000_pci_tbl,
 	.probe		= rz1000_init_one,
-	.remove		= ide_pci_remove,
+	.remove		= rz1000_remove,
 };
 
 static int __init rz1000_ide_init(void)
drivers/ide/trm290.c +2 -2
index 75ea615..2a5ea90 100644
@@ -328,10 +328,10 @@ static struct ide_dma_ops trm290_dma_ops = {
 static const struct ide_port_info trm290_chipset __devinitdata = {
 	.name		= DRV_NAME,
 	.init_hwif	= init_hwif_trm290,
-	.chipset	= ide_trm290,
 	.port_ops	= &trm290_port_ops,
 	.dma_ops	= &trm290_dma_ops,
-	.host_flags	= IDE_HFLAG_NO_ATAPI_DMA |
+	.host_flags	= IDE_HFLAG_TRM290 |
+			  IDE_HFLAG_NO_ATAPI_DMA |
 #if 0 /* play it safe for now */
 			  IDE_HFLAG_TRUST_BIOS_FOR_DMA |
 #endif
drivers/ide/tx4938ide.c +2 -2
index 9120063..13b63e7 100644
@@ -181,7 +181,7 @@ static void tx4938ide_input_data_swap(ide_drive_t *drive, struct request *rq,
 
 	while (count--)
 		*ptr++ = cpu_to_le16(__raw_readw((void __iomem *)port));
-	__ide_flush_dcache_range((unsigned long)buf, count * 2);
+	__ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
 }
 
 static void tx4938ide_output_data_swap(ide_drive_t *drive, struct request *rq,
@@ -195,7 +195,7 @@ static void tx4938ide_output_data_swap(ide_drive_t *drive, struct request *rq,
 		__raw_writew(le16_to_cpu(*ptr), (void __iomem *)port);
 		ptr++;
 	}
-	__ide_flush_dcache_range((unsigned long)buf, count * 2);
+	__ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
 }
 
 static const struct ide_tp_ops tx4938ide_tp_ops = {
drivers/ide/tx4939ide.c +8 -2
index bafb7d1..97cd9e0 100644
@@ -259,6 +259,12 @@ static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq)
 			bcount = 0x10000 - (cur_addr & 0xffff);
 			if (bcount > cur_len)
 				bcount = cur_len;
+			/*
+			 * This workaround for zero count seems required.
+			 * (standard ide_build_dmatable do it too)
+			 */
+			if ((bcount & 0xffff) == 0x0000)
+				bcount = 0x8000;
 			*table++ = bcount & 0xffff;
 			*table++ = cur_addr;
 			cur_addr += bcount;
@@ -558,7 +564,7 @@ static void tx4939ide_input_data_swap(ide_drive_t *drive, struct request *rq,
 
 	while (count--)
 		*ptr++ = cpu_to_le16(__raw_readw((void __iomem *)port));
-	__ide_flush_dcache_range((unsigned long)buf, count * 2);
+	__ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
 }
 
 static void tx4939ide_output_data_swap(ide_drive_t *drive, struct request *rq,
@@ -572,7 +578,7 @@ static void tx4939ide_output_data_swap(ide_drive_t *drive, struct request *rq,
 		__raw_writew(le16_to_cpu(*ptr), (void __iomem *)port);
 		ptr++;
 	}
-	__ide_flush_dcache_range((unsigned long)buf, count * 2);
+	__ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
 }
 
 static const struct ide_tp_ops tx4939ide_tp_ops = {
drivers/ide/umc8672.c +7 -4
index 1da076e..e29978c 100644
@@ -107,18 +107,21 @@ static void umc_set_speeds(u8 speeds[])
 static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
 	ide_hwif_t *hwif = drive->hwif;
-	unsigned long flags;
+	ide_hwgroup_t *mate_hwgroup = hwif->mate ? hwif->mate->hwgroup : NULL;
+	unsigned long uninitialized_var(flags);
 
 	printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
 		drive->name, pio, pio_to_umc[pio]);
-	spin_lock_irqsave(&ide_lock, flags);
-	if (hwif->mate && hwif->mate->hwgroup->handler) {
+	if (mate_hwgroup)
+		spin_lock_irqsave(&mate_hwgroup->lock, flags);
+	if (mate_hwgroup && mate_hwgroup->handler) {
 		printk(KERN_ERR "umc8672: other interface is busy: exiting tune_umc()\n");
 	} else {
 		current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio];
 		umc_set_speeds(current_speeds);
 	}
-	spin_unlock_irqrestore(&ide_lock, flags);
+	if (mate_hwgroup)
+		spin_unlock_irqrestore(&mate_hwgroup->lock, flags);
 }
 
 static const struct ide_port_ops umc8672_port_ops = {
drivers/scsi/ide-scsi.c +21 -11
index 2370fd8..c24140a 100644
@@ -578,6 +578,8 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd)
 {
 	idescsi_scsi_t *scsi  = scsihost_to_idescsi(cmd->device->host);
 	ide_drive_t    *drive = scsi->drive;
+	ide_hwif_t     *hwif;
+	ide_hwgroup_t  *hwgroup;
 	int		busy;
 	int             ret   = FAILED;
 
@@ -594,13 +596,16 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd)
 		goto no_drive;
 	}
 
-	/* First give it some more time, how much is "right" is hard to say :-( */
+	hwif = drive->hwif;
+	hwgroup = hwif->hwgroup;
 
-	busy = ide_wait_not_busy(HWIF(drive), 100);	/* FIXME - uses mdelay which causes latency? */
+	/* First give it some more time, how much is "right" is hard to say :-(
+	   FIXME - uses mdelay which causes latency? */
+	busy = ide_wait_not_busy(hwif, 100);
 	if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
 		printk (KERN_WARNING "ide-scsi: drive did%s become ready\n", busy?" not":"");
 
-	spin_lock_irq(&ide_lock);
+	spin_lock_irq(&hwgroup->lock);
 
 	/* If there is no pc running we're done (our interrupt took care of it) */
 	pc = drive->pc;
@@ -629,7 +634,7 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd)
 	}
 
 ide_unlock:
-	spin_unlock_irq(&ide_lock);
+	spin_unlock_irq(&hwgroup->lock);
 no_drive:
 	if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
 		printk (KERN_WARNING "ide-scsi: abort returns %s\n", ret == SUCCESS?"success":"failed");
@@ -642,6 +647,7 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd)
 	struct request *req;
 	idescsi_scsi_t *scsi  = scsihost_to_idescsi(cmd->device->host);
 	ide_drive_t    *drive = scsi->drive;
+	ide_hwgroup_t  *hwgroup;
 	int             ready = 0;
 	int             ret   = SUCCESS;
 
@@ -658,14 +664,18 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd)
 		return FAILED;
 	}
 
+	hwgroup = drive->hwif->hwgroup;
+
 	spin_lock_irq(cmd->device->host->host_lock);
-	spin_lock(&ide_lock);
+	spin_lock(&hwgroup->lock);
 
 	pc = drive->pc;
+	if (pc)
+		req = pc->rq;
 
-	if (pc == NULL || (req = pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) {
+	if (pc == NULL || req != hwgroup->rq || hwgroup->handler == NULL) {
 		printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n");
-		spin_unlock(&ide_lock);
+		spin_unlock(&hwgroup->lock);
 		spin_unlock_irq(cmd->device->host->host_lock);
 		return FAILED;
 	}
@@ -685,10 +695,10 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd)
 			BUG();
 	}
 
-	HWGROUP(drive)->rq = NULL;
-	HWGROUP(drive)->handler = NULL;
-	HWGROUP(drive)->busy = 1;		/* will set this to zero when ide reset finished */
-	spin_unlock(&ide_lock);
+	hwgroup->rq = NULL;
+	hwgroup->handler = NULL;
+	hwgroup->busy = 1; /* will set this to zero when ide reset finished */
+	spin_unlock(&hwgroup->lock);
 
 	ide_do_reset(drive);
 
include/linux/ide.h +21 -16
index 010fb26..e99c56d 100644
@@ -122,8 +122,6 @@ struct ide_io_ports {
 #define MAX_DRIVES	2	/* per interface; 2 assumed by lots of code */
 #define SECTOR_SIZE	512
 
-#define IDE_LARGE_SEEK(b1,b2,t)	(((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
-
 /*
  * Timeouts for various operations:
  */
@@ -172,9 +170,7 @@ typedef int (ide_ack_intr_t)(struct hwif_s *);
 enum {		ide_unknown,	ide_generic,	ide_pci,
 		ide_cmd640,	ide_dtc2278,	ide_ali14xx,
 		ide_qd65xx,	ide_umc8672,	ide_ht6560b,
-		ide_rz1000,	ide_trm290,
-		ide_cmd646,	ide_cy82c693,	ide_4drives,
-		ide_pmac,	ide_acorn,
+		ide_4drives,	ide_pmac,	ide_acorn,
 		ide_au1xxx,	ide_palm3710
 };
 
@@ -496,8 +492,6 @@ enum {
 	 * when more than one interrupt is needed.
 	 */
 	IDE_AFLAG_LIMIT_NFRAMES		= (1 << 7),
-	/* Seeking in progress. */
-	IDE_AFLAG_SEEKING		= (1 << 8),
 	/* Saved TOC information is current. */
 	IDE_AFLAG_TOC_VALID		= (1 << 9),
 	/* We think that the drive door is locked. */
@@ -845,8 +839,6 @@ typedef struct hwif_s {
 	unsigned	extra_ports;	/* number of extra dma ports */
 
 	unsigned	present    : 1;	/* this interface exists */
-	unsigned	serialized : 1;	/* serialized all channel operation */
-	unsigned	sharing_irq: 1;	/* 1 = sharing irq with another hwif */
 	unsigned	sg_mapped  : 1;	/* sg_table and sg_nents are ready */
 
 	struct device		gendev;
@@ -909,6 +901,8 @@ typedef struct hwgroup_s {
 
 	int req_gen;
 	int req_gen_timer;
+
+	spinlock_t lock;
 } ide_hwgroup_t;
 
 typedef struct ide_driver_s ide_driver_t;
@@ -1122,6 +1116,14 @@ enum {
 	IDE_PM_COMPLETED,
 };
 
+int generic_ide_suspend(struct device *, pm_message_t);
+int generic_ide_resume(struct device *);
+
+void ide_complete_power_step(ide_drive_t *, struct request *);
+ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
+void ide_complete_pm_request(ide_drive_t *, struct request *);
+void ide_check_pm_state(ide_drive_t *, struct request *);
+
 /*
  * Subdrivers support.
  *
@@ -1376,8 +1378,8 @@ enum {
 	IDE_HFLAG_LEGACY_IRQS		= (1 << 21),
 	/* force use of legacy IRQs */
 	IDE_HFLAG_FORCE_LEGACY_IRQS	= (1 << 22),
-	/* limit LBA48 requests to 256 sectors */
-	IDE_HFLAG_RQSIZE_256		= (1 << 23),
+	/* host is TRM290 */
+	IDE_HFLAG_TRM290		= (1 << 23),
 	/* use 32-bit I/O ops */
 	IDE_HFLAG_IO_32BIT		= (1 << 24),
 	/* unmask IRQs */
@@ -1415,6 +1417,9 @@ struct ide_port_info {
 
 	ide_pci_enablebit_t	enablebits[2];
 	hwif_chipset_t		chipset;
+
+	u16			max_sectors;	/* if < than the default one */
+
 	u32			host_flags;
 	u8			pio_mask;
 	u8			swdma_mask;
@@ -1610,13 +1615,13 @@ extern struct mutex ide_cfg_mtx;
 /*
  * Structure locking:
  *
- * ide_cfg_mtx and ide_lock together protect changes to
- * ide_hwif_t->{next,hwgroup}
+ * ide_cfg_mtx and hwgroup->lock together protect changes to
+ * ide_hwif_t->next
  * ide_drive_t->next
  *
- * ide_hwgroup_t->busy: ide_lock
- * ide_hwgroup_t->hwif: ide_lock
- * ide_hwif_t->mate: constant, no locking
+ * ide_hwgroup_t->busy: hwgroup->lock
+ * ide_hwgroup_t->hwif: hwgroup->lock
+ * ide_hwif_t->{hwgroup,mate}: constant, no locking
  * ide_drive_t->hwif: constant, no locking
  */