pre-commit: uncrustify based on staged changes
PATCH 1/1 pre-commit: uncrustify based on staged changes
Previously the generated patch was based on the file(s) in the working directory. This is a problem if you have not to be commited changes there and these changes fix formatting issues that exist in the staging area. This effectively circumventes the script from rejecting the commit.
An example:
git add file.c
git commit
... pre-commit hooks complains about formatting ... ... you fix the file manually, forget to git add ... git commit
... succeeds, even though the commit still has issues ...
--- dev-tools/git-pre-commit-uncrustify.sh | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-)
dev-tools/git-pre-commit-uncrustify.sh +9 -16
@@ -97,6 +97,7 @@ fi # create a filename to store our generated patch patch=$(mktemp /tmp/ovpn-fmt-XXXXXX) +tmpout=$(mktemp /tmp/uncrustify-XXXXXX) # create one patch containing all changes to the files # sed to remove quotes around the filename, if inserted by the system
@@ -106,21 +107,11 @@ sed -e 's/^"\(.*\)"$/\1/' | \ while read file do # ignore file if we do check for file extensions and the file - # does not match any of the extensions specified in $FILE_EXTS + # does not match the extensions .c or .h if ! matches_extension "$file"; then continue; fi - # escape special characters in the source filename: - # - '\': backslash needs to be escaped - # - '*': used as matching string => '*' would mean expansion - # (curiously, '?' must not be escaped) - # - '[': used as matching string => '[' would mean start of set - # - '|': used as sed split char instead of '/', so it needs to be escaped - # in the filename - # printf %s particularly important if the filename contains the % character - file_escaped_source=$(printf "%s" "$file" | sed -e 's/[\*[|]/\\&/g') - # escape special characters in the target filename: # phase 1 (characters escaped in the output diff): # - '\': backslash needs to be escaped in the output diff
@@ -136,15 +127,17 @@ do # uncrustify our sourcefile, create a patch with diff and append it to our $patch # The sed call is necessary to transform the patch from - # --- $file timestamp - # +++ - timestamp + # --- - timestamp + # +++ $tmpout timestamp # to both lines working on the same file and having a a/ and b/ prefix. # Else it can not be applied with 'git apply'. - "$UNCRUSTIFY" -q -c "$UNCRUST_CONFIG" -f "$file" | \ - diff -u -- "$file" - | \ - sed -e "1s|--- $file_escaped_source|--- \"a/$file_escaped_target\"|" -e "2s|+++ -|+++ \"b/$file_escaped_target\"|" >> "$patch" + git show ":$file" | "$UNCRUSTIFY" -q -l C -c "$UNCRUST_CONFIG" -o "$tmpout" + git show ":$file" | diff -u -- - "$tmpout" | \ + sed -e "1s|--- -|--- \"b/$file_escaped_target\"|" -e "2s|+++ $tmpout|+++ \"a/$file_escaped_target\"|" >> "$patch" done +rm -f "$tmpout" + # if no patch has been generated all is ok, clean up the file stub and exit if [ ! -s "$patch" ] ; then rm -f "$patch"
Signature · 1 line
2.32.0
Tested various combinations of workspace changes and index changes and it seems to do what it should do.
Quoted 89 lines
Heiko Hund <[email protected]...> hat am 17.05.2022 23:01 geschrieben:
Previously the generated patch was based on the file(s) in the working directory. This is a problem if you have not to be commited changes there and these changes fix formatting issues that exist in the staging area. This effectively circumventes the script from rejecting the commit.
An example:
git addfile.c
git commit
... pre-commit hooks complains about formatting ... ... you fix the file manually, forget to git add ... git commit
... succeeds, even though the commit still has issues ...Signed-off-by Heiko Hund <[email protected]...>--- dev-tools/git-pre-commit-uncrustify.sh | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-)dev-tools/git-pre-commit-uncrustify.sh +9
-16@@ -97,6 +97,7 @@ fi # create a filename to store our generated patch patch=$(mktemp /tmp/ovpn-fmt-XXXXXX) +tmpout=$(mktemp /tmp/uncrustify-XXXXXX) # create one patch containing all changes to the files # sed to remove quotes around the filename, if inserted by the system@@ -106,21 +107,11 @@ sed -e 's/^"\(.*\)"$/\1/' | \ while read file do # ignore file if we do check for file extensions and the file - # does not match any of the extensions specified in $FILE_EXTS + # does not match the extensions .c or .h if ! matches_extension "$file"; then continue; fi - # escape special characters in the source filename: - # - '\': backslash needs to be escaped - # - '*': used as matching string => '*' would mean expansion - # (curiously, '?' must not be escaped) - # - '[': used as matching string => '[' would mean start of set - # - '|': used as sed split char instead of '/', so it needs to be escaped - # in the filename - # printf %s particularly important if the filename contains the % character - file_escaped_source=$(printf "%s" "$file" | sed -e 's/[\*[|]/\\&/g') - # escape special characters in the target filename: # phase 1 (characters escaped in the output diff): # - '\': backslash needs to be escaped in the output diff@@ -136,15 +127,17 @@ do # uncrustify our sourcefile, create a patch with diff and append it to our $patch # The sed call is necessary to transform the patch from - # --- $file timestamp - # +++ - timestamp + # --- - timestamp + # +++ $tmpout timestamp # to both lines working on the same file and having a a/ and b/ prefix. # Else it can not be applied with 'git apply'. - "$UNCRUSTIFY" -q -c "$UNCRUST_CONFIG" -f "$file" | \ - diff -u -- "$file" - | \ - sed -e "1s|--- $file_escaped_source|--- \"a/$file_escaped_target\"|" -e "2s|+++ -|+++ \"b/$file_escaped_target\"|" >> "$patch" + git show ":$file" | "$UNCRUSTIFY" -q -l C -c "$UNCRUST_CONFIG" -o "$tmpout" + git show ":$file" | diff -u -- - "$tmpout" | \ + sed -e "1s|--- -|--- \"b/$file_escaped_target\"|" -e "2s|+++ $tmpout|+++ \"a/$file_escaped_target\"|" >> "$patch" done +rm -f "$tmpout" + # if no patch has been generated all is ok, clean up the file stub and exit if [ ! -s "$patch" ] ; then rm -f "$patch"Signature · 8 lines
2.32.0 _______________________________________________ Openvpn-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openvpn-devel
--
Frank Lichtenheld
Hi,
Quoted 14 lines · Heiko Hund
Previously the generated patch was based on the file(s) in the working directory. This is a problem if you have not to be commited changes there and these changes fix formatting issues that exist in the staging area. This effectively circumventes the script from rejecting the commit.
An example:
git addfile.c
git commit
... pre-commit hooks complains about formatting ... ... you fix the file manually, forget to git add ... git commit
... succeeds, even though the commit still has issues ...
Quoted 1 line
Signed-off-by Heiko Hund <[email protected]...>
I tested the case described in the example (that I actually reported to Heiko) and I can confirm it is now fixed.
Normal workflow seems to be still working as well :-)
minor comments below
Quoted 17 lines
--- dev-tools/git-pre-commit-uncrustify.sh | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-)dev-tools/git-pre-commit-uncrustify.sh +1
-0@@ -97,6 +97,7 @@ fi # create a filename to store our generated patch patch=$(mktemp /tmp/ovpn-fmt-XXXXXX) +tmpout=$(mktemp /tmp/uncrustify-XXXXXX) # create one patch containing all changes to the files # sed to remove quotes around the filename, if inserted by the system
dev-tools/git-pre-commit-uncrustify.sh sed -e 's/^"\(.*\)"$/\1/' | \ · line 110
Quoted 5 lines
dev-tools/git-pre-commit-uncrustify.sh +1
-1@@ -106,21 +107,11 @@ sed -e 's/^"\(.*\)"$/\1/' | \ while read file do # ignore file if we do check for file extensions and the file - # does not match any of the extensions specified in $FILE_EXTS + # does not match the extensions .c or .h
is this unrelated?
Quoted 4 lines
dev-tools/git-pre-commit-uncrustify.sh +0
-0if ! matches_extension "$file"; then continue; fi
dev-tools/git-pre-commit-uncrustify.sh sed -e 's/^"\(.*\)"$/\1/' | \ · line 123
Quoted 10 lines
dev-tools/git-pre-commit-uncrustify.sh +0
-10- # escape special characters in the source filename: - # - '\': backslash needs to be escaped - # - '*': used as matching string => '*' would mean expansion - # (curiously, '?' must not be escaped) - # - '[': used as matching string => '[' would mean start of set - # - '|': used as sed split char instead of '/', so it needs to be escaped - # in the filename - # printf %s particularly important if the filename contains the % character - file_escaped_source=$(printf "%s" "$file" | sed -e 's/[\*[|]/\\&/g') -
this seems unrelated too?
dev-tools/git-pre-commit-uncrustify.sh do · line 131
Quoted 11 lines
dev-tools/git-pre-commit-uncrustify.sh +2
-2# escape special characters in the target filename: # phase 1 (characters escaped in the output diff): # - '\': backslash needs to be escaped in the output diff@@ -136,15 +127,17 @@ do # uncrustify our sourcefile, create a patch with diff and append it to our $patch # The sed call is necessary to transform the patch from - # --- $file timestamp - # +++ - timestamp + # --- - timestamp + # +++ $tmpout timestamp
same?
Quoted 15 lines
dev-tools/git-pre-commit-uncrustify.sh +5
-3# to both lines working on the same file and having a a/ and b/ prefix. # Else it can not be applied with 'git apply'. - "$UNCRUSTIFY" -q -c "$UNCRUST_CONFIG" -f "$file" | \ - diff -u -- "$file" - | \ - sed -e "1s|--- $file_escaped_source|--- \"a/$file_escaped_target\"|" -e "2s|+++ -|+++ \"b/$file_escaped_target\"|" >> "$patch" + git show ":$file" | "$UNCRUSTIFY" -q -l C -c "$UNCRUST_CONFIG" -o "$tmpout" + git show ":$file" | diff -u -- - "$tmpout" | \ + sed -e "1s|--- -|--- \"b/$file_escaped_target\"|" -e "2s|+++ $tmpout|+++ \"a/$file_escaped_target\"|" >> "$patch" done +rm -f "$tmpout" + # if no patch has been generated all is ok, clean up the file stub and exit if [ ! -s "$patch" ] ; then rm -f "$patch"
Signature · 1 line
Antonio Quartulli
Hi
Quoted 4 lines · On Mittwoch, 18. Mai 2022 15:35:58 CEST Antonio Quartulli wrote:
dev-tools/git-pre-commit-uncrustify.sh sed -e 's/^"\(.*\)"$/\1/' | \ · line 110
Quoted 2 lines
dev-tools/git-pre-commit-uncrustify.sh +1
-1- # does not match any of the extensions specified in $FILE_EXTS + # does not match the extensions .c or .his this unrelated?
Yes, it is. The original script (collection) has a config file where $FILE_EXTS is defined. However, we hardcode this to C and header files only. Simply and oversight from the initial version drive-by fix.
Quoted 11 lines
Quoted 10 lines
dev-tools/git-pre-commit-uncrustify.sh +0
-6- # escape special characters in the source filename: - # - '\': backslash needs to be escaped - # - '*': used as matching string => '*' would mean expansion - # (curiously, '?' must not be escaped) - # - '[': used as matching string => '[' would mean start of set - # - '|': used as sed split char instead of '/', so it needs to beescaped - # in the filename
- # printf %s particularly important if the filename contains the %
character - file_escaped_source=$(printf "%s" "$file" | sed -e
's/[\*[|]/\\&/g') -
Quoted 1 line
this seems unrelated too?
See below.
Quoted 6 lines
dev-tools/git-pre-commit-uncrustify.sh do · line 131
Quoted 4 lines
dev-tools/git-pre-commit-uncrustify.sh +2
-2- # --- $file timestamp - # +++ - timestamp + # --- - timestamp + # +++ $tmpout timestampsame?
See below.
Quoted 3 lines
Quoted 3 lines
(quoted diff) +2
-0+ git show ":$file" | diff -u -- - "$tmpout" | \ + sed -e "1s|--- -|--- \"b/$file_escaped_target\"|" -e "2s|+++$tmpout|+++ \"a/$file_escaped_target\"|" >> "$patch">
Since the patch is now done differently $file_escaped_source is no longer needed. Instead we use $tmpout (the uncrustify output), which has a well defined (no need to being escaped) filename.
The file contents we diff from stdin has changed as well. It is no longer the uncrustify output, but instead the file contents from the index (staged), thus the --- and +++ lines, we need to fix, switched as well.
Hope that explains it.
Heiko
Antonio Quartulli
Acked-byHi,
On 18/05/2022 15:51, Heiko Hund wrote:
[CUT]
Quoted 1 line
Hope that explains it.
Thanks, it makes sense.
Signature · 1 line
Antonio Quartulli
I have not tested this much - will use it soon :-) - but I'm fine if Frank and Antonio says this works now for "with stage" usage, too.
Your patch has been applied to the master branch.
commit d78c2a73a8f631f082ec03bb21b329d3e6fd00dd
Author: Heiko Hund Date: Tue May 17 23:01:21 2022 +0200
pre-commit: uncrustify based on staged changes
Signed-off-by: Heiko Hund <[email protected]...>
Acked-by: Frank Lichtenheld <[email protected]...>
Acked-by: Antonio Quartulli <[email protected]...>
Message-Id: <[email protected]...>
URL: https://www.mail-archive.com/[email protected]/msg24376.html
Signed-off-by: Gert Doering <[email protected]...>--
kind regards,
Gert Doering