Skip to contentSkip to conversation

sparc: Use 64BIT config entry

PATCH In review Bastian Blank 3 participants 3 messages Jan 1, 2009 – Jan 5, 2009 SPARC + UltraSPARC (sparc/sparc64)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 sparc: Use 64BIT config entry

Use 64BIT config entry to distinguish between 32 and 64bit builds instead of relying on the ARCH setting. Using sparc64 as ARCH still forces 64BIT on.

Inspired by the x86 and s390 configs.

Signature · 2 lines
You can't evaluate a man by logic alone.
		-- McCoy, "I, Mudd", stardate 4513.3
arch/sparc/Kconfig +9 -16
index 0a94d9c..73ddfd9 100644
@@ -4,6 +4,13 @@
 
 mainmenu "Linux/SPARC Kernel Configuration"
 
+config 64BIT
+	bool "64-bit kernel" if ARCH = "sparc"
+	default ARCH = "sparc64"
+	help
+	  Say yes to build a 64-bit kernel - formerly known as sparc64
+	  Say no to build a 32-bit kernel - formerly known as sparc
+
 config SPARC
 	bool
 	default y
@@ -15,22 +22,11 @@ config SPARC
 	select RTC_CLASS
 	select RTC_DRV_M48T59
 
-# Identify this as a Sparc32 build
 config SPARC32
-	bool
-	default y if ARCH = "sparc"
-	help
-	  SPARC is a family of RISC microprocessors designed and marketed by
-	  Sun Microsystems, incorporated.  They are very widely found in Sun
-	  workstations and clones. This port covers the original 32-bit SPARC;
-	  it is old and stable and usually considered one of the "big three"
-	  along with the Intel and Alpha ports.  The UltraLinux project
-	  maintains both the SPARC32 and SPARC64 ports; its web page is
-	  available at <http://www.ultralinux.org/>.
+	def_bool !64BIT
 
 config SPARC64
-	bool
-	default y if ARCH = "sparc64"
+	def_bool 64BIT
 	select ARCH_SUPPORTS_MSI
 	select HAVE_FUNCTION_TRACER
 	select HAVE_KRETPROBES
@@ -53,9 +49,6 @@ config BITS
 	default 32 if SPARC32
 	default 64 if SPARC64
 
-config 64BIT
-	def_bool y if SPARC64
-
 config GENERIC_TIME
 	bool
 	default y if SPARC64
#1 lore raw
Quoted 3 lines · Bastian Blank

Use 64BIT config entry to distinguish between 32 and 64bit builds instead of relying on the ARCH setting. Using sparc64 as ARCH still forces 64BIT on.

Hi Bastian.

I have tested the patch and it works as expected.
One small nit below.

Sam

Quoted 14 lines

Inspired by the x86 and s390 configs.

Signature · 2 lines
You can't evaluate a man by logic alone.
		-- McCoy, "I, Mudd", stardate 4513.3
arch/sparc/Kconfig +0 -0
index 0a94d9c..73ddfd9 100644

arch/sparc/Kconfig line 12

Quoted 9 lines
arch/sparc/Kconfig +6 -0
@@ -4,6 +4,13 @@
 
 mainmenu "Linux/SPARC Kernel Configuration"
 
+config 64BIT
+	bool "64-bit kernel" if ARCH = "sparc"
+	default ARCH = "sparc64"
+	help
+	  Say yes to build a 64-bit kernel - formerly known as sparc64
+	  Say no to build a 32-bit kernel - formerly known as sparc

We should update this help escription with something remotely like this:

arch/sparc/Kconfig line 15

Quoted 3 lines
arch/sparc/Kconfig +3 -0
+	  SPARC is a family of RISC microprocessors designed and marketed by
+	  Sun Microsystems, incorporated.  They are very widely found in Sun
+	  workstations and clones.

Just a raw copy from the (always hidden) help text for SPARC32.

Sam

maintainer Tested-by Sam Ravnborg
#2 lore raw

From: Sam Ravnborg <[email protected]>
Date: Fri, 2 Jan 2009 09:04:20 +0100

Quoted 10 lines · Bastian Blank

Review

Quoted 6 lines
(quoted diff) +6 -0
+config 64BIT
+	bool "64-bit kernel" if ARCH = "sparc"
+	default ARCH = "sparc64"
+	help
+	  Say yes to build a 64-bit kernel - formerly known as sparc64
+	  Say no to build a 32-bit kernel - formerly known as sparc

We should update this help escription with something remotely like this:

Quoted 5 lines

Review

Quoted 3 lines
(quoted diff) +3 -0
+	  SPARC is a family of RISC microprocessors designed and marketed by
+	  Sun Microsystems, incorporated.  They are very widely found in Sun
+	  workstations and clones.

Just a raw copy from the (always hidden) help text for SPARC32.

I've made this adjustment and commited this change as follows below.

Thanks everyone.

sparc: Use 64BIT config entry

Use 64BIT config entry to distinguish between 32 and 64bit builds instead of relying on the ARCH setting. Using sparc64 as ARCH still forces 64BIT on.

Inspired by the x86 and s390 configs.

[ Integrated CONFIG_64BIT help text suggestions from Sam -DaveM ]

---
 arch/sparc/Kconfig |   29 +++++++++++++----------------
 1 files changed, 13 insertions(+), 16 deletions(-)
arch/sparc/Kconfig +13 -16
index 002f7b4..de58c02 100644
@@ -4,6 +4,17 @@
 
 mainmenu "Linux/SPARC Kernel Configuration"
 
+config 64BIT
+	bool "64-bit kernel" if ARCH = "sparc"
+	default ARCH = "sparc64"
+	help
+	  SPARC is a family of RISC microprocessors designed and marketed by
+	  Sun Microsystems, incorporated.  They are very widely found in Sun
+	  workstations and clones.
+
+	  Say yes to build a 64-bit kernel - formerly known as sparc64
+	  Say no to build a 32-bit kernel - formerly known as sparc
+
 config SPARC
 	bool
 	default y
@@ -15,22 +26,11 @@ config SPARC
 	select RTC_CLASS
 	select RTC_DRV_M48T59
 
-# Identify this as a Sparc32 build
 config SPARC32
-	bool
-	default y if ARCH = "sparc"
-	help
-	  SPARC is a family of RISC microprocessors designed and marketed by
-	  Sun Microsystems, incorporated.  They are very widely found in Sun
-	  workstations and clones. This port covers the original 32-bit SPARC;
-	  it is old and stable and usually considered one of the "big three"
-	  along with the Intel and Alpha ports.  The UltraLinux project
-	  maintains both the SPARC32 and SPARC64 ports; its web page is
-	  available at <http://www.ultralinux.org/>.
+	def_bool !64BIT
 
 config SPARC64
-	bool
-	default y if ARCH = "sparc64"
+	def_bool 64BIT
 	select ARCH_SUPPORTS_MSI
 	select HAVE_FUNCTION_TRACER
 	select HAVE_KRETPROBES
@@ -53,9 +53,6 @@ config BITS
 	default 32 if SPARC32
 	default 64 if SPARC64
 
-config 64BIT
-	def_bool y if SPARC64
-
 config GENERIC_TIME
 	bool
 	default y if SPARC64
Signature · 1 line
1.6.1.15.g159c88