usb : OMAP3 : Enable Mentor USB OTG module interface clock
PATCH 2/4 usb : OMAP3 : Enable Mentor USB OTG module interface clock
This patch enables Mentor USB OTG module interface clock.
--- cpu/arm_cortexa8/omap3/clock.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
cpu/arm_cortexa8/omap3/clock.c +3 -0
@@ -376,6 +376,9 @@ void per_clocks_enable(void)sr32 (&prcm_base->iclken_cam,0 ,32 ,ICK_CAM_ON );sr32 (&prcm_base->fclken_per,0 ,32 ,FCK_PER_ON );sr32 (&prcm_base->iclken_per,0 ,32 ,ICK_PER_ON ); +#ifdef CONFIG_USB_OMAP3530 +sr32 (&prcm_base->iclken1_core,4 ,1 ,0x1 ); +#endif sdelay (1000 ); }
Signature · 1 line
1.5.6
PATCH 2/4 usb : OMAP3 : Enable Mentor USB OTG module interface clock
Hello Thomas,
2009/1/4 Thomas Abraham <[email protected]>:
Quoted 8 lines
This patch enables Mentor USB OTG module interface clock.
Signed-off-by Ravi Babu <[email protected]>Signed-off-by Swaminathan S <[email protected]>Signed-off-by Thomas Abraham <[email protected]>Signed-off-by Ajay Kumar Gupta <[email protected]>--- cpu/arm_cortexa8/omap3/clock.c | 3 +++
This file does not exist in my u-boot-usb tree yet, so there is a dependency missing here in your list of patch dependencies.
Kind regards,
Remy
Quoted 24 lines
1 files changed, 3 insertions(+), 0 deletions(-)cpu/arm_cortexa8/omap3/clock.c +3
-1@@ -376,6 +376,9 @@ void per_clocks_enable(void)sr32 (&prcm_base->iclken_cam,0 ,32 ,ICK_CAM_ON );sr32 (&prcm_base->fclken_per,0 ,32 ,FCK_PER_ON );sr32 (&prcm_base->iclken_per,0 ,32 ,ICK_PER_ON ); +#ifdef CONFIG_USB_OMAP3530 +sr32 (&prcm_base->iclken1_core,4 ,1 ,0x1 ); +#endif sdelay (1000 ); } --1.5.6
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Abraham
PATCH 2/4 usb : OMAP3 : Enable Mentor USB OTG module interface clock
Remy,
Quoted 6 lines
-----Original Message-----
From: l.pinguin at gmail.com [mailto:l.pinguin at gmail.com] On Behalf Of Remy Bohmer
Sent: Monday, January 05, 2009 1:52 AM
Subject: Re: [U-Boot] [PATCH 2/4] usb : OMAP3 : Enable Mentor USB OTG module interface clock
<snip>
Quoted 4 lines
Quoted 1 line
cpu/arm_cortexa8/omap3/clock.c | 3 +++This file does not exist in my u-boot-usb tree yet, so there is a dependency missing here in your list of patch dependencies.
I missed to list the dependency of the OMAP3 USB patches on the v6 OMAP3 patches. The OMAP3 USB patches were generated against http://git.gitorious.org/u-boot-omap3/mainline.git
and omap3-dev branch.
Thanks,
Thomas.
Quoted 4 lines
Kind regards,
Remy
<snip>
PATCH 2/4 usb : OMAP3 : Enable Mentor USB OTG module interface clock
Hello Thomas,
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
cpu/arm_cortexa8/omap3/clock.c | 3 +++This file does not exist in my u-boot-usb tree yet, so there is a dependency missing here in your list of patch dependencies.
I missed to list the dependency of the OMAP3 USB patches on the v6 OMAP3 patches. The OMAP3 USB patches were generated against http://git.gitorious.org/u-boot-omap3/mainline.git
and omap3-dev branch.
Okay, in that case, what do you expect from me to do with these patches, related to the u-boot-usb tree?
I would suggest to mainline the OMAP3 v6 patches first, It is not up to the u-boot-USB tree to integrate new ARM boards/cpus, unless the ARM maintainer integrated and approved them in his tree. So, I am ignoring these OMAP3-USB patches for now.
Kind Regards,
Remy
PATCH 2/4 usb : OMAP3 : Enable Mentor USB OTG module interface clock
Quoted 6 lines · Remy Bohmer
Hello Thomas,
Quoted 4 lines
Quoted 3 lines
Quoted 1 line
cpu/arm_cortexa8/omap3/clock.c | 3 +++This file does not exist in my u-boot-usb tree yet, so there is a dependency missing here in your list of patch dependencies.
Quoted 7 lines
Quoted 4 lines
I missed to list the dependency of the OMAP3 USB patches on the v6 OMAP3 patches. The OMAP3 USB patches were generated against http://git.gitorious.org/u-boot-omap3/mainline.git
and omap3-dev branch.Okay, in that case, what do you expect from me to do with these patches, related to the u-boot-usb tree?
please just review them and if you are ok ack them and I'll merge them when processing the OMAP3 patch seriers
Best Regards,
J.
PATCH 2/4 usb : OMAP3 : Enable Mentor USB OTG module interface clock
Hello Jean-Chistophe,
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
Quoted 2 lines
This file does not exist in my u-boot-usb tree yet, so there is a dependency missing here in your list of patch dependencies.
I missed to list the dependency of the OMAP3 USB patches on the v6 OMAP3 patches. The OMAP3 USB patches were generated against http://git.gitorious.org/u-boot-omap3/mainline.git
and omap3-dev branch.
Quoted 4 lines
Quoted 2 lines
Okay, in that case, what do you expect from me to do with these patches, related to the u-boot-usb tree?
please just review them and if you are ok ack them and I'll merge them when processing the OMAP3 patch seriers
That is the complicated part, it depends also on patches I have in my tree, which are changing that fast (fix on fix, version on version), that I prefer to push them to the next release, when hopefully things are stabilized.
So, I have no problems with the separation Thomas has made to push the USB patches to the USB tree, and the basic board patches to you, but then I have to wait until you have the boards integrated. When the patches are in your tree, I believe we would not have merge conflicts in Wolfgangs tree, if my tree is pulled later than yours.
I think it would get really complicated if you are going to pull the other (unstable) USB patches also in your tree..
Kind Regards,
Remy
PATCH 2/4 usb : OMAP3 : Enable Mentor USB OTG module interface clock
Dear Remy,
Quoted 3 lines · In message <[email protected]> you…
So, I have no problems with the separation Thomas has made to push the USB patches to the USB tree, and the basic board patches to you, but
Actually this is the correct thing to do.
Quoted 1 line
then I have to wait until you have the boards integrated. When the
Correct. First the generic support has to go in through the ARM tree, and then you can apply the USB related patches on top of that.
Quoted 2 lines
patches are in your tree, I believe we would not have merge conflicts in Wolfgangs tree, if my tree is pulled later than yours.
Actually the sequence should be that the ARM tree gets merged into mainline first, then you update your USB repository from mainline (thus getting all the new ARM stuff, too), then you can apply the USB patches.
Quoted 2 lines
I think it would get really complicated if you are going to pull the other (unstable) USB patches also in your tree..
This is something that I definitely do not want to see.
Jean-Chistophe, please do *NOT* pull any USB (or other non-ARM) patches into the ARM repo.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There's another way to survive. Mutual trust -- and help. -- Kirk, "Day of the Dove", stardate unknown