Skip to contentSkip to conversation

at91: add at91sam9xeek board support

PATCH New Nicolas Ferre 2 participants 2 messages Jan 5, 2009 – Jan 6, 2009 Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 at91: add at91sam9xeek board support

At91sam9xe is basically an at91sam9260 with embedded flash. We can manage it as another entry for at91sam9260 in the Makefile.

Check documentation at :
http://www.atmel.com/dyn/products/product_card.asp?part_id=4263

---
Patch against u-boot-at91.git

V2 integrates the typo noted during
the v1 review (Typo: CFG_ convert to CONFIG_SYS_)

 Makefile |   17 +++++++++++++++++
 1 files changed, 17 insertions(+), 0 deletions(-)
Makefile +17 -0
index 623b8f7..74dfcca 100644
@@ -2599,6 +2599,23 @@ at91sam9260ek_config	:	unconfig
 	fi;
 	@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
 
+at91sam9xeek_nandflash_config \
+at91sam9xeek_dataflash_cs0_config \
+at91sam9xeek_dataflash_cs1_config \
+at91sam9xeek_config	:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+	fi;
+	@$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9
+
 at91sam9261ek_nandflash_config \
 at91sam9261ek_dataflash_cs0_config \
 at91sam9261ek_dataflash_cs3_config \
Signature · 1 line
1.5.3.7
#1 lore raw

PATCH v2 1/1 at91: add at91sam9xeek board support

Quoted 7 lines · Nicolas Ferre

At91sam9xe is basically an at91sam9260 with embedded flash. We can manage it as another entry for at91sam9260 in the Makefile.

Check documentation at :
http://www.atmel.com/dyn/products/product_card.asp?part_id=4263

Quoted 8 lines

---
Patch against u-boot-at91.git

V2 integrates the typo noted during
the v1 review (Typo: CFG_ convert to CONFIG_SYS_)

Makefile | 17 +++++++++++++++++

1 files changed, 17 insertions(+), 0 deletions(-)

applied

Best Regards,
J.