[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b
With pulling git today I'm unable to shut the machine down completely. (the system just sits there with the message on the screen);
* will now halt
[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b [ 286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3 [ 286.550598] Oops: 0002 [#1] SMP [ 286.552206] last sysfs file: /sys/block/sda/removeable [ 286.553844] Modules linked in: hidp radeon drm agpgart btusb rfcomm bnep sco l2cap bluetooth fan battery container ipt_LOG xt_limit xt_tcpudp xt_state ipt_addrtype nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_nat nf_conntrack_ftp ipmi_watchdog ipmi_msghandler uvcvideo isight_firmware uinput arpt_mangle arptable_filter arp_tables nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables x_tables coretemp eeprom acpi_cpufreq cpufreq_powersave cpufreq_performance cpufreq_ondemand cpufreq_conservative appletouch snd_had_codec_idt ohci1394 ehci_hcd snd_hda_intel snd_hda_codec thermal ath9k uhci_hcd ieee1394 joydev pata_acpi snd_hwdep snd_pcm snd_page_alloc video ac button processor applesmc evdev [ 286.560580] [ 286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5 #1) MacBookPro2,2 [ 286.560580] EIP: 0060:[<c0150ca4>] EFLAGS: 00010293 CPU: 0 [ 286.560580] EIP: is at __stop_machine+0x88/0xe3 [ 286.560580] EAX: 6b6b6b6b EBX: 00000000 ECX: 6b6b6b6b EDX: 00000000 [ 286.560580] ESI: c054abe0 EDI: c03d03a4 EBP: f1a29e54 ESP: f1a29e44 [ 286.560580] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30 task.ti=f1a28000) [ 286.560580] Stack: [ 286.560580] f1a29e60 c054abe0 00000001 00000010 f1a29e7c c03d04e4 ffffffea 00000010 [ 286.560580] 00000001 00000003 00000022 00000001 4321fedc c054abe0 f1a29e94 c012a57e [ 286.560580] 00000000 ffffffff 4321fedc 28121969 f1a29e9c c01360c0 f1a29fb0 c0136301 [ 286.560580] Call Trace: [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234 [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39 [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191 [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1 [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61 [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101 [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105 [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158 [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159 [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34 [ 286.560580] Code: c7 05 10 06 62 c0 00 00 00 00 a3 f4 05 62 c0 c7 05 ec 05 62 c0 01 00 00 00 83 cb ff eb 2d a1 1c 06 62 c0 f7 d0 8b 0c 98 8d 41 04 <c7> 01 00 00 00 00 89 41 04 89 41 08 c7 41 0c ff 0c 15 c0 89 d8 [ 286.560580] EIP: [<c0150ca4>] __stop_machine+0x88/0xe3 SS:ESP 0068:f1a29e44 [ 286.639215] ---[ end trace 5b080c1ab14203ae ] ---
Segmentation fault
after this message appears, if I hold down the start button the system shuts off after a few seconds.
(BTW hopefully the number are correct,
manually writing this down, is a bit of a pain);
regards;
Justin P. Mattock
Hi Justin,
Quoted 5 lines · Justin P. Mattock
With pulling git today I'm unable to shut the machine down completely. (the system just sits there with the message on the screen);
* will now halt
[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b
That looks like use-after-free in __stop_machine() so lets cc Rusty. If you want, you can convert the oops location into human-readable form. Just search for "GDB" in Documentation/BUG-HUNTING for instructions how to do that. And don't forget to send your .config.
Quoted 69 lines
[ 286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3 [ 286.550598] Oops: 0002 [#1] SMP [ 286.552206] last sysfs file: /sys/block/sda/removeable [ 286.553844] Modules linked in: hidp radeon drm agpgart btusb rfcomm bnepsco l2cap bluetooth fan battery container
ipt_LOGxt_limitxt_tcpudpxt_stateipt_addrtypenf_nat_ircnf_conntrack_ircnf_nat_ftpnf_natnf_conntrack_ftpipmi_watchdogipmi_msghandleruvcvideoisight_firmwareuinputarpt_manglearptable_filterarp_tablesnf_conntrack_ipv4nf_conntracknf_defrag_ipv4iptable_mangleiptable_filterip_tablesx_tablescoretemp eepromacpi_cpufreqcpufreq_powersavecpufreq_performancecpufreq_ondemandcpufreq_conservativeappletouchsnd_had_codec_idtohci1394ehci_hcdsnd_hda_intelsnd_hda_codecthermal ath9kuhci_hcdieee1394 joydevpata_acpisnd_hwdepsnd_pcmsnd_page_allocvideo ac button processor applesmc evdev[ 286.560580] [ 286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5 #1) MacBookPro2,2 [ 286.560580] EIP: 0060:[<c0150ca4>] EFLAGS: 00010293 CPU: 0 [ 286.560580] EIP: is at __stop_machine+0x88/0xe3 [ 286.560580] EAX: 6b6b6b6b EBX: 00000000 ECX: 6b6b6b6b EDX: 00000000 [ 286.560580] ESI: c054abe0 EDI: c03d03a4 EBP: f1a29e54 ESP: f1a29e44 [ 286.560580] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30 task.ti=f1a28000) [ 286.560580] Stack: [ 286.560580] f1a29e60 c054abe0 00000001 00000010 f1a29e7c c03d04e4 ffffffea 00000010 [ 286.560580] 00000001 00000003 00000022 00000001 4321fedc c054abe0 f1a29e94 c012a57e [ 286.560580] 00000000 ffffffff 4321fedc 28121969 f1a29e9c c01360c0 f1a29fb0 c0136301 [ 286.560580] Call Trace: [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234 [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39 [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191 [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1 [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61 [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101 [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105 [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158 [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159 [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34 [ 286.560580] Code: c7 05 10 06 62 c0 00 00 00 00 a3 f4 05 62 c0 c7 05 ec 05 62 c0 01 00 00 00 83 cb ff eb 2d a1 1c 06 62 c0 f7 d0 8b 0c 98 8d 41 04 <c7> 01 00 00 00 00 89 41 04 89 41 08 c7 41 0c ff 0c 15 c0 89 d8 [ 286.560580] EIP: [<c0150ca4>] __stop_machine+0x88/0xe3 SS:ESP 0068:f1a29e44 [ 286.639215] ---[ end trace 5b080c1ab14203ae ] ---Segmentation fault
after this message appears, if I hold down the start button the system shuts off after a few seconds.
(BTW hopefully the number are correct,
manually writing this down, is a bit of a pain);regards;
Justin P. Mattock
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 8 lines · Pekka Enberg
Hi Justin,
Quoted 3 lines · Justin P. Mattock
With pulling git today I'm unable to shut the machine down completely. (the system just sits there with the message on the screen);
Quoted 82 lines
Quoted 3 lines
* will now halt
[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6bThat looks like use-after-free in
__stop_machine()so lets cc Rusty. If you want, you can convert the oops location into human-readable form. Just search for "GDB" inDocumentation/BUG-HUNTINGfor instructions how to do that. And don't forget to send your .config.Quoted 70 lines
[ 286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3 [ 286.550598] Oops: 0002 [#1] SMP [ 286.552206] last sysfs file: /sys/block/sda/removeable [ 286.553844] Modules linked in: hidp radeon drm agpgart btusb rfcomm bnepsco l2cap bluetooth fan battery container
ipt_LOGxt_limitxt_tcpudpxt_stateipt_addrtypenf_nat_ircnf_conntrack_ircnf_nat_ftpnf_natnf_conntrack_ftpipmi_watchdogipmi_msghandleruvcvideoisight_firmwareuinputarpt_manglearptable_filterarp_tablesnf_conntrack_ipv4nf_conntracknf_defrag_ipv4iptable_mangleiptable_filterip_tablesx_tablescoretemp eepromacpi_cpufreqcpufreq_powersavecpufreq_performancecpufreq_ondemandcpufreq_conservativeappletouchsnd_had_codec_idtohci1394ehci_hcdsnd_hda_intelsnd_hda_codecthermal ath9kuhci_hcdieee1394 joydevpata_acpisnd_hwdepsnd_pcmsnd_page_allocvideo ac button processor applesmc evdev[ 286.560580] [ 286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5 #1) MacBookPro2,2 [ 286.560580] EIP: 0060:[<c0150ca4>] EFLAGS: 00010293 CPU: 0 [ 286.560580] EIP: is at __stop_machine+0x88/0xe3 [ 286.560580] EAX: 6b6b6b6b EBX: 00000000 ECX: 6b6b6b6b EDX: 00000000 [ 286.560580] ESI: c054abe0 EDI: c03d03a4 EBP: f1a29e54 ESP: f1a29e44 [ 286.560580] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30 task.ti=f1a28000) [ 286.560580] Stack: [ 286.560580] f1a29e60 c054abe0 00000001 00000010 f1a29e7c c03d04e4 ffffffea 00000010 [ 286.560580] 00000001 00000003 00000022 00000001 4321fedc c054abe0 f1a29e94 c012a57e [ 286.560580] 00000000 ffffffff 4321fedc 28121969 f1a29e9c c01360c0 f1a29fb0 c0136301 [ 286.560580] Call Trace: [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234 [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39 [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191 [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1 [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61 [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101 [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105 [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158 [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159 [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34 [ 286.560580] Code: c7 05 10 06 62 c0 00 00 00 00 a3 f4 05 62 c0 c7 05 ec 05 62 c0 01 00 00 00 83 cb ff eb 2d a1 1c 06 62 c0 f7 d0 8b 0c 98 8d 41 04 <c7> 01 00 00 00 00 89 41 04 89 41 08 c7 41 0c ff 0c 15 c0 89 d8 [ 286.560580] EIP: [<c0150ca4>] __stop_machine+0x88/0xe3 SS:ESP 0068:f1a29e44 [ 286.639215] ---[ end trace 5b080c1ab14203ae ] ---Segmentation fault
after this message appears, if I hold down the start button the system shuts off after a few seconds.
(BTW hopefully the number are correct,
manually writing this down, is a bit of a pain);regards;
Justin P. Mattock
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Thats nice, thanks for the info.
I like the idea of using gcc to disassemble this text.
Since not knowing what I'm doing, I'll have to do my homework on this. (really curious to see what this does);
regards;
Justin P. Mattock
Quoted 5 lines · Pekka Enberg
Quoted 3 lines · Justin P. Mattock
With pulling git today I'm unable to shut the machine down completely. (the system just sits there with the message on the screen);
Quoted 66 lines
Quoted 2 lines
* will now halt
[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6bThat looks like use-after-free in
__stop_machine()so lets cc Rusty. If you want, you can convert the oops location into human-readable form. Just search for "GDB" inDocumentation/BUG-HUNTINGfor instructions how to do that. And don't forget to send your .config.Quoted 58 lines
[ 286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3 [ 286.550598] Oops: 0002 [#1] SMP [ 286.552206] last sysfs file: /sys/block/sda/removeable [ 286.553844] Modules linked in: hidp radeon drm agpgart btusb rfcomm bnepsco l2cap bluetooth fan battery container
ipt_LOGxt_limitxt_tcpudpxt_stateipt_addrtypenf_nat_ircnf_conntrack_ircnf_nat_ftpnf_natnf_conntrack_ftpipmi_watchdogipmi_msghandleruvcvideoisight_firmwareuinputarpt_manglearptable_filterarp_tablesnf_conntrack_ipv4nf_conntracknf_defrag_ipv4iptable_mangleiptable_filterip_tablesx_tablescoretemp eepromacpi_cpufreqcpufreq_powersavecpufreq_performancecpufreq_ondemandcpufreq_conservativeappletouchsnd_had_codec_idtohci1394ehci_hcdsnd_hda_intelsnd_hda_codecthermal ath9kuhci_hcdieee1394 joydevpata_acpisnd_hwdepsnd_pcmsnd_page_allocvideo ac button processor applesmc evdev[ 286.560580] [ 286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5 #1) MacBookPro2,2 [ 286.560580] EIP: 0060:[<c0150ca4>] EFLAGS: 00010293 CPU: 0 [ 286.560580] EIP: is at __stop_machine+0x88/0xe3 [ 286.560580] EAX: 6b6b6b6b EBX: 00000000 ECX: 6b6b6b6b EDX: 00000000 [ 286.560580] ESI: c054abe0 EDI: c03d03a4 EBP: f1a29e54 ESP: f1a29e44 [ 286.560580] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30 task.ti=f1a28000) [ 286.560580] Stack: [ 286.560580] f1a29e60 c054abe0 00000001 00000010 f1a29e7c c03d04e4 ffffffea 00000010 [ 286.560580] 00000001 00000003 00000022 00000001 4321fedc c054abe0 f1a29e94 c012a57e [ 286.560580] 00000000 ffffffff 4321fedc 28121969 f1a29e9c c01360c0 f1a29fb0 c0136301 [ 286.560580] Call Trace: [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234 [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39 [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191 [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1 [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61 [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101 [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105 [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158 [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159 [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34 [ 286.560580] Code: c7 05 10 06 62 c0 00 00 00 00 a3 f4 05 62 c0 c7 05 ec 05 62 c0 01 00 00 00 83 cb ff eb 2d a1 1c 06 62 c0 f7 d0 8b 0c 98 8d 41 04 <c7> 01 00 00 00 00 89 41 04 89 41 08 c7 41 0c ff 0c 15 c0 89 d8 [ 286.560580] EIP: [<c0150ca4>] __stop_machine+0x88/0xe3 SS:ESP 0068:f1a29e44 [ 286.639215] ---[ end trace 5b080c1ab14203ae ] ---Segmentation fault
after this message appears, if I hold down the start button the system shuts off after a few seconds.
(BTW hopefully the number are correct,
manually writing this down, is a bit of a pain);
scripts/decodecode gives us:
0: c7 05 10 06 62 c0 00 movl $0x0,0xc0620610 7: 00 00 00 a: a3 f4 05 62 c0 mov %eax,0xc06205f4 f: c7 05 ec 05 62 c0 01 movl $0x1,0xc06205ec 16: 00 00 00 19: 83 cb ff or $0xffffffff,%ebx 1c: eb 2d jmp 0x4b 1e: a1 1c 06 62 c0 mov 0xc062061c,%eax 23: f7 d0 not %eax 25: 8b 0c 98 mov (%eax,%ebx,4),%ecx 28: 8d 41 04 lea 0x4(%ecx),%eax 2b: c7 01 00 00 00 00 movl $0x0,(%ecx) 31: 89 41 04 mov %eax,0x4(%ecx) 34: 89 41 08 mov %eax,0x8(%ecx) 37: c7 41 0c ff 0c 15 c0 movl $0xc0150cff,0xc(%ecx) 3e: 89 d8 mov %ebx,%eax 0: c7 01 00 00 00 00 movl $0x0,(%ecx) <-- oops 6: 89 41 04 mov %eax,0x4(%ecx) 9: 89 41 08 mov %eax,0x8(%ecx) c: c7 41 0c ff 0c 15 c0 movl $0xc0150cff,0xc(%ecx) 13: 89 d8 mov %ebx,%eax
objdump -S -d kernel/stop_machine.o looks like this on my machine:
/* Schedule the stop_cpu work on all cpus: hold this CPU so one
* doesn't hit this CPU until we're ready. */
get_cpu();
for_each_online_cpu(i) {
sm_work = percpu_ptr(stop_machine_work, i);
INIT_WORK(sm_work, stop_cpu);
8b: c7 01 00 00 00 00 movl $0x0,(%ecx)
91: c7 41 0c e0 00 00 00 movl $0xe0,0xc(%ecx)where
#define INIT_WORK(_work, _func) \
do { \
(_work)->data = (atomic_long_t) WORK_DATA_INIT(); \and offset of ->data is zero and WORK_DATA_INIT() expands to ATOMIC_LONG_INIT(0) so looks to me like 'sm_work' is used after it has been free'd. Perhaps stop_machine_destroy() was called before or in parallel to __stop_machine()? So lets cc Heiko as well.
Pekka
Quoted 5 lines · Pekka Enberg
Quoted 4 lines · Pekka Enberg
Quoted 2 lines · Justin P. Mattock
With pulling git today I'm unable to shut the machine down completely. (the system just sits there with the message on the screen);
[...]
Quoted 6 lines
Quoted 6 lines
Quoted 1 line
[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6bThat looks like use-after-free in
__stop_machine()so lets cc Rusty. If you want, you can convert the oops location into human-readable form. Just search for "GDB" inDocumentation/BUG-HUNTINGfor instructions how to do that. And don't forget to send your .config.
[...]
Quoted 16 lines
Quoted 16 lines
Quoted 16 lines
[ 286.560580] EIP: is at __stop_machine+0x88/0xe3 [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234 [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39 [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191 [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1 [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61 [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101 [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105 [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158 [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159 [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34
[...]
Quoted 4 lines
and offset of ->data is zero and
WORK_DATA_INIT()expands toATOMIC_LONG_INIT(0)so looks to me like 'sm_work' is used after it has been free'd. Perhapsstop_machine_destroy()was called before or in parallel to__stop_machine()? So lets cc Heiko as well.
I missed to convert disable_nonboot_cpus to stop_machine_create/destroy. So it's a use before-even-allocated bug.
The patch below should hopefully fix it:
Subject: [PATCH] cpu hotplug: add stop_machine_create/destroy to disable_nonboot_cpus
From: Heiko Carstens <[email protected]>
disable_nonboot_cpus calls directly _cpu_down. _cpu_down however relies on the in advanced created stop_machine kernel threads which should be created by the caller (like cpu_down does).
So add the missing stop_machine_create/destroy calls to disable_nonboot_cpus as well.
Fixes this bug:
[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b [ 286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3 [ 286.550598] Oops: 0002 [#1] SMP [ 286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5 [ 286.560580] EIP: is at __stop_machine+0x88/0xe3 [ 286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30 [ 286.560580] Call Trace: [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234 [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39 [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191 [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1 [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61 [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101 [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105 [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158 [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159 [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34
--- kernel/cpu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
kernel/cpu.c +5 -1
@@ -379,8 +379,11 @@ static cpumask_var_t frozen_cpus;int disable_nonboot_cpus (void ) { -int cpu, first_cpu, error =0 ; +int cpu, first_cpu, error; + error =stop_machine_create (); +if (error) +return error;cpu_maps_update_begin (); first_cpu =cpumask_first (cpu_online_mask);/* We take down all of the non-boot CPUs in one shot to avoid races
@@ -409,6 +412,7 @@ int disable_nonboot_cpus(void)printk (KERN_ERR "Non-boot CPUs are not disabled\n" ); }cpu_maps_update_done (); +stop_machine_destroy ();return error; }
Pekka Enberg
Reviewed-byQuoted 42 lines · Heiko Carstens
I missed to convert
disable_nonboot_cpusto
stop_machine_create/destroy.
So it's a use before-even-allocated bug.The patch below should hopefully fix it:
Subject: [PATCH] cpu hotplug: add stop_machine_create/destroy to
disable_nonboot_cpusFrom: Heiko Carstens <[email protected]>
disable_nonboot_cpuscalls directly_cpu_down._cpu_downhowever relies on the in advanced createdstop_machinekernel threads which should be created by the caller (likecpu_downdoes).So add the missing stop_machine_create/destroy calls to
disable_nonboot_cpusas well.Fixes this bug:
[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b [ 286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3 [ 286.550598] Oops: 0002 [#1] SMP [ 286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5 [ 286.560580] EIP: is at __stop_machine+0x88/0xe3 [ 286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30 [ 286.560580] Call Trace: [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234 [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39 [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191 [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1 [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61 [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101 [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105 [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158 [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159 [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34
Quoted 2 lines
Reported-by "Justin P. Mattock" <[email protected]>Signed-off-by Heiko Carstens <[email protected]>
Looks good to me!
Quoted 29 lines
--- kernel/cpu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)Index:
linux-2.6/kernel/cpu.c
===================================================================kernel/cpu.c +5
-1@@ -379,8 +379,11 @@ static cpumask_var_t frozen_cpus;int disable_nonboot_cpus (void ) { -int cpu, first_cpu, error =0 ; +int cpu, first_cpu, error; + error =stop_machine_create (); +if (error) +return error;cpu_maps_update_begin (); first_cpu =cpumask_first (cpu_online_mask);/* We take down all of the non-boot CPUs in one shot to avoid races @@ -409,6 +412,7 @@ int disable_nonboot_cpus(void)printk (KERN_ERR "Non-boot CPUs are not disabled\n" ); }cpu_maps_update_done (); +stop_machine_destroy ();return error; }
Quoted 7 lines · Pekka Enberg
Quoted 5 lines · Heiko Carstens
I missed to convert
disable_nonboot_cpusto stop_machine_create/destroy.
So it's a use before-even-allocated bug.
The patch below should hopefully fix it:
Subject: [PATCH] cpu hotplug: add stop_machine_create/destroy todisable_nonboot_cpusLooks good to me!
This also fixes the suspend-to-ram/disk problem. Without it, the system will just hang.
Thanks for the fix.
Thanks,
Jeff.
Quoted 7 lines · Jeff Chua
Quoted 6 lines · Pekka Enberg
Quoted 5 lines · Heiko Carstens
I missed to convert
disable_nonboot_cpusto stop_machine_create/destroy.
So it's a use before-even-allocated bug.
The patch below should hopefully fix it:
Subject: [PATCH] cpu hotplug: add stop_machine_create/destroy todisable_nonboot_cpus
Quoted 6 lines
Quoted 1 line
Looks good to me!
This also fixes the suspend-to-ram/disk problem. Without it, the system will just hang.
Thanks for the fix.
Did you also see the reboot problem and does the patch fix it for you?
Quoted 8 lines · Heiko Carstens
Quoted 7 lines · Jeff Chua
Quoted 6 lines · Pekka Enberg
Quoted 5 lines · Heiko Carstens
I missed to convert
disable_nonboot_cpusto stop_machine_create/destroy.
So it's a use before-even-allocated bug.
The patch below should hopefully fix it:
Subject: [PATCH] cpu hotplug: add stop_machine_create/destroy todisable_nonboot_cpus
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Looks good to me!
This also fixes the suspend-to-ram/disk problem. Without it, the system will just hang.
Did you also see the reboot problem and does the patch fix it for you?
I never had problem with rebooting. Just suspend hanging which is really annoying ... walking away and come back hours later and realized that the suspend is hanging and having to do a hard boot.
Thanks,
Jeff.
PATCH 1/1 stop_machine/cpu hotplug: fix disable_nonboot_cpus
From: Heiko Carstens <[email protected]>
disable_nonboot_cpus calls _cpu_down. But _cpu_down requires that the caller already created the stop_machine workqueue (like cpu_down does). Otherwise a call to stop_machine will lead to accesses to random memory regions.
When introducing this new interface (9ea09af3bd3090e8349ca2899ca2011bd94cda85 "stop_machine: introduce stop_machine_create/destroy") I missed the second call site of _cpu_down.
So add the missing stop_machine_create/destroy calls to disable_nonboot_cpus as well.
Fixes suspend-to-ram/disk and also this bug:
[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b [ 286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3 [ 286.550598] Oops: 0002 [#1] SMP [ 286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5 [ 286.560580] EIP: is at __stop_machine+0x88/0xe3 [ 286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30 [ 286.560580] Call Trace: [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234 [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39 [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191 [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1 [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61 [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101 [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105 [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158 [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159 [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34
--- kernel/cpu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
kernel/cpu.c +5 -1
@@ -379,8 +379,11 @@ static cpumask_var_t frozen_cpus;int disable_nonboot_cpus (void ) { -int cpu, first_cpu, error =0 ; +int cpu, first_cpu, error; + error =stop_machine_create (); +if (error) +return error;cpu_maps_update_begin (); first_cpu =cpumask_first (cpu_online_mask);/* We take down all of the non-boot CPUs in one shot to avoid races
@@ -409,6 +412,7 @@ int disable_nonboot_cpus(void)printk (KERN_ERR "Non-boot CPUs are not disabled\n" ); }cpu_maps_update_done (); +stop_machine_destroy ();return error; }
Re: [PATCH] stop_machine/cpu hotplug: fix disable_nonboot_cpus
Quoted 6 lines · Heiko Carstens
From: Heiko Carstens <[email protected]>
disable_nonboot_cpuscalls_cpu_down. But_cpu_downrequires that the caller already created thestop_machineworkqueue (likecpu_downdoes). Otherwise a call tostop_machinewill lead to accesses to random memory regions.
btw., i got this crash earlier today:
CPU0 attaching sched-domain:
domain 0: span 0-1 level CPU
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level CPU
groups: 1 0
eth0: no IPv6 routers present
BUG: Bad page state in process cc1 pfn:00879 page:c101b894 flags:00000400 count:0 mapcount:0 mapping:(null) index:0 Pid: 3060, comm: cc1 Not tainted 2.6.28-tip-07641-gb97d41d-dirty #14985 Call Trace: [<c016ce8b>] bad_page+0xcf/0xe5 [<c016d3b4>] free_pages_check+0xa7/0xc5 [<c016d400>] free_hot_cold_page+0x2e/0x138 [<c014751c>] ? __lock_acquire+0x127/0x29d [<c016d558>] free_hot_page+0xf/0x11 [<c0170963>] put_page+0x76/0x7c [<c0185071>] ? constant_test_bit+0x9/0x20 [<c0187149>] kfree+0x30/0xe5 [<c0164993>] ? trace_hardirqs_on+0x8/0x1c [<c01547dd>] free_user_ns+0x1d/0x20 [<c01547c0>] ? free_user_ns+0x0/0x20 [<c02c7a41>] kref_put+0x18/0x22 [<c0132d4c>] put_user_ns+0x16/0x18 [<c0132f52>] free_uid+0x59/0xc8 [<c0136239>] ? groups_free+0x36/0x3a [<c0140406>] put_cred_rcu+0x5f/0x70 [<c01598fb>] __rcu_process_callbacks+0x168/0x1f8 [<c03031be>] ? isicom_tx+0x0/0x31f [<c01599b1>] rcu_process_callbacks+0x26/0x46 [<c012f11d>] __do_softirq+0x9d/0x139 [<c012f080>] ? __do_softirq+0x0/0x139 <IRQ> [<c012efe2>] ? irq_exit+0x4c/0x83 [<c05cc586>] ? __irqentry_text_start+0x6e/0x7c [<c0103f61>] ? apic_timer_interrupt+0x2d/0x34
and i applied your patch (from the other thread) and never saw this bug again.
So if it's the same bug (it appears to be) then you have my:
Ingo
Re: [PATCH] stop_machine/cpu hotplug: fix disable_nonboot_cpus
In reply to Heiko Carstens2009/1/7 Heiko Carstens <[email protected]>:
Quoted 63 lines
From: Heiko Carstens <[email protected]>
disable_nonboot_cpuscalls_cpu_down. But_cpu_downrequires that the caller already created thestop_machineworkqueue (likecpu_downdoes). Otherwise a call tostop_machinewill lead to accesses to random memory regions.When introducing this new interface (
9ea09af3bd3090e8349ca2899ca2011bd94cda85"stop_machine: introduce stop_machine_create/destroy") I missed the second call site of_cpu_down.
So add the missing stop_machine_create/destroy calls todisable_nonboot_cpusas well.Fixes suspend-to-ram/disk and also this bug:
[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b [ 286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3 [ 286.550598] Oops: 0002 [#1] SMP [ 286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5 [ 286.560580] EIP: is at __stop_machine+0x88/0xe3 [ 286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30 [ 286.560580] Call Trace: [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234 [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39 [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191 [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1 [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61 [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101 [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105 [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158 [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159 [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34Reported-by "Justin P. Mattock" <[email protected]>Reviewed-by Pekka Enberg <[email protected]>Signed-off-by Heiko Carstens <[email protected]>--- kernel/cpu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)Index:
linux-2.6/kernel/cpu.c
===================================================================kernel/cpu.c +4
-1@@ -379,8 +379,11 @@ static cpumask_var_t frozen_cpus;int disable_nonboot_cpus (void ) { -int cpu, first_cpu, error =0 ; +int cpu, first_cpu, error; + error =stop_machine_create (); +if (error) +return error;cpu_maps_update_begin (); first_cpu =cpumask_first (cpu_online_mask);/* We take down all of the non-boot CPUs in one shot to avoid races
kernel/cpu.c int disable_nonboot_cpus(void) · line 418
Quoted 7 lines
kernel/cpu.c +1
-0@@ -409,6 +412,7 @@ int disable_nonboot_cpus(void)printk (KERN_ERR "Non-boot CPUs are not disabled\n" ); }cpu_maps_update_done (); +stop_machine_destroy ();return error; }
That should explain why suspend to disk failed on my box yesterday on the processors stage...
Thanks!
Re: [PATCH] stop_machine/cpu hotplug: fix disable_nonboot_cpus
Quoted 70 lines · Frédéric Weisbecker
2009/1/7 Heiko Carstens <[email protected]>:
Quoted 68 lines
From: Heiko Carstens <[email protected]>
disable_nonboot_cpuscalls_cpu_down. But_cpu_downrequires that the caller already created thestop_machineworkqueue (likecpu_downdoes). Otherwise a call tostop_machinewill lead to accesses to random memory regions.When introducing this new interface (
9ea09af3bd3090e8349ca2899ca2011bd94cda85"stop_machine: introduce stop_machine_create/destroy") I missed the second call site of_cpu_down.
So add the missing stop_machine_create/destroy calls todisable_nonboot_cpusas well.Fixes suspend-to-ram/disk and also this bug:
[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b [ 286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3 [ 286.550598] Oops: 0002 [#1] SMP [ 286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5 [ 286.560580] EIP: is at __stop_machine+0x88/0xe3 [ 286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30 [ 286.560580] Call Trace: [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234 [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39 [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191 [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1 [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61 [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101 [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105 [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158 [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159 [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34Reported-by "Justin P. Mattock" <[email protected]>Reviewed-by Pekka Enberg <[email protected]>Signed-off-by Heiko Carstens <[email protected]>--- kernel/cpu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)Index:
linux-2.6/kernel/cpu.c
===================================================================kernel/cpu.c +5
-1@@ -379,8 +379,11 @@ static cpumask_var_t frozen_cpus;int disable_nonboot_cpus (void ) { -int cpu, first_cpu, error =0 ; +int cpu, first_cpu, error; + error =stop_machine_create (); +if (error) +return error;cpu_maps_update_begin (); first_cpu =cpumask_first (cpu_online_mask);/* We take down all of the non-boot CPUs in one shot to avoid races @@ -409,6 +412,7 @@ int disable_nonboot_cpus(void)printk (KERN_ERR "Non-boot CPUs are not disabled\n" ); }cpu_maps_update_done (); +stop_machine_destroy ();return error;
Quoted 10 lines
kernel/cpu.c int disable_nonboot_cpus(void) · line 418
Quoted 3 lines
kernel/cpu.c +0
-0}That should explain why suspend to disk failed on my box yesterday on the processors stage...
Thanks!
O.K. applied the patch,
and shutdown the machine
a few times; no freeze, no bug message.
sweet!!.
Now I'm gonna try and dismantle
a bug message for educational purposes.
Thanks for the assistance.
regards;
Justin P. Mattock
Re: [PATCH] stop_machine/cpu hotplug: fix disable_nonboot_cpus
In reply to Frédéric WeisbeckerQuoted 70 lines · Frédéric Weisbecker
2009/1/7 Heiko Carstens <[email protected]>:
Quoted 68 lines
From: Heiko Carstens <[email protected]>
disable_nonboot_cpuscalls_cpu_down. But_cpu_downrequires that the caller already created thestop_machineworkqueue (likecpu_downdoes). Otherwise a call tostop_machinewill lead to accesses to random memory regions.When introducing this new interface (
9ea09af3bd3090e8349ca2899ca2011bd94cda85"stop_machine: introduce stop_machine_create/destroy") I missed the second call site of_cpu_down.
So add the missing stop_machine_create/destroy calls todisable_nonboot_cpusas well.Fixes suspend-to-ram/disk and also this bug:
[ 286.547348] BUG: unable to handle kernel paging request at 6b6b6b6b [ 286.548940] IP: [<c0150ca4>] __stop_machine+0x88/0xe3 [ 286.550598] Oops: 0002 [#1] SMP [ 286.560580] Pid: 3273, comm: halt Not tainted (2.6.28-06127-g238c6d5 [ 286.560580] EIP: is at __stop_machine+0x88/0xe3 [ 286.560580] Process halt (pid: 3273, ti=f1a28000 task=f4530f30 [ 286.560580] Call Trace: [ 286.560580] [<c03d04e4>] ? _cpu_down+0x10f/0x234 [ 286.560580] [<c012a57e>] ? disable_nonboot_cpus+0x58/0xdc [ 286.560580] [<c01360c0>] ? kernel_poweroff+0x22/0x39 [ 286.560580] [<c0136301>] ? sys_reboot+0xde/0x14c [ 286.560580] [<c01331b2>] ? complete_signal+0x179/0x191 [ 286.560580] [<c0133396>] ? send_signal+0x1cc/0x1e1 [ 286.560580] [<c03de418>] ? _spin_unlock_irqrestore+0x2d/0x3c [ 286.560580] [<c0133b65>] ? group_send_signal_info+0x58/0x61 [ 286.560580] [<c0133b9e>] ? kill_pid_info+0x30/0x3a [ 286.560580] [<c0133d49>] ? sys_kill+0x75/0x13a [ 286.560580] [<c01a06cb>] ? mntput_no_expire+ox1f/0x101 [ 286.560580] [<c019b3b3>] ? dput+0x1e/0x105 [ 286.560580] [<c018ef87>] ? __fput+0x150/0x158 [ 286.560580] [<c0157abf>] ? audit_syscall_entry+0x137/0x159 [ 286.560580] [<c010329f>] ? sysenter_do_call+0x12/0x34Reported-by "Justin P. Mattock" <[email protected]>Reviewed-by Pekka Enberg <[email protected]>Signed-off-by Heiko Carstens <[email protected]>--- kernel/cpu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)Index:
linux-2.6/kernel/cpu.c
===================================================================kernel/cpu.c +5
-1@@ -379,8 +379,11 @@ static cpumask_var_t frozen_cpus;int disable_nonboot_cpus (void ) { -int cpu, first_cpu, error =0 ; +int cpu, first_cpu, error; + error =stop_machine_create (); +if (error) +return error;cpu_maps_update_begin (); first_cpu =cpumask_first (cpu_online_mask);/* We take down all of the non-boot CPUs in one shot to avoid races @@ -409,6 +412,7 @@ int disable_nonboot_cpus(void)printk (KERN_ERR "Non-boot CPUs are not disabled\n" ); }cpu_maps_update_done (); +stop_machine_destroy ();return error;
Quoted 10 lines
kernel/cpu.c int disable_nonboot_cpus(void) · line 418
Quoted 3 lines
kernel/cpu.c +0
-0}That should explain why suspend to disk failed on my box yesterday on the processors stage...
Thanks!
I hate to ask this, but I'm going to
anyway:
when running
gdb /usr/src/linux/vmlinux
(hoping to see if gdb will catch the bug);
I keep getting:
Program terminated with signal SIGKILL, Killed.
The program no longer exists.
You can't do that without a process to debug.
if i do a:
(gdb) disassemble __stop_machine
(as described in Documentation);
I'll see a bit of info.
How do I start/or figure out a process
to debug? i.g. under the bug message
that I wrote down, it says Pid: 3273
entering that in (gdb) r 3273
results in a SIGKILL.
regards;
Justin P. Mattock
Quoted 25 lines · Jeff Chua
Quoted 12 lines · Heiko Carstens
Quoted 10 lines · Jeff Chua
Quoted 8 lines · Pekka Enberg
Quoted 6 lines · Heiko Carstens
I missed to convert
disable_nonboot_cpusto stop_machine_create/destroy.
So it's a use before-even-allocated bug.
The patch below should hopefully fix it:
Subject: [PATCH] cpu hotplug: add stop_machine_create/destroy todisable_nonboot_cpusQuoted 9 lines
Quoted 5 lines
Quoted 2 lines
Looks good to me!
This also fixes the suspend-to-ram/disk problem. Without it, the system will just hang.
Did you also see the reboot problem and does the patch fix it for you?
Quoted 8 lines
I never had problem with rebooting. Just suspend hanging which is really annoying ... walking away and come back hours later and realized that the suspend is hanging and having to do a hard boot.
Thanks,
Jeff.
Man!! I missed this whole conversation (passed out, too tired);
I'll go ahead and apply the patch and let you know If I get the freeze at shutdown. Then I'm still interested in knowing how to take a debug messages and dissect it to find the exact location of the problem. (but could do that later);
regards;
Justin P. Mattock