spi/atmel: add AT45DB321D support
PATCH 1/1 spi/atmel: add AT45DB321D support
From: Brad Bozarth <[email protected]>
--- drivers/mtd/spi/atmel.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
drivers/mtd/spi/atmel.c +8 -0
@@ -52,6 +52,14 @@ to_atmel_spi_flash(struct spi_flash *flash)static const struct atmel_spi_flash_params atmel_spi_flash_table[] = { { + .idcode1 =0x27 , + .l2_page_size =9 , + .pages_per_block =8 , + .blocks_per_sector =32 , + .nr_sectors =32 , + .name ="AT45DB321D" , + }, + { .idcode1 =0x28 , .l2_page_size =10 , .pages_per_block =8 ,
Signature · 1 line
1.6.0.6
PATCH 1/1 spi/atmel: add AT45DB321D support
Quoted 13 lines · Mike Frysinger
From: Brad Bozarth <[email protected]>
Signed-off-by Brad Bozarth <[email protected]>Signed-off-by Mike Frysinger <[email protected]>--- drivers/mtd/spi/atmel.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)drivers/mtd/spi/atmel.c +0
-0
drivers/mtd/spi/atmel.c to_atmel_spi_flash(struct spi_flash *flash) · line 60
Quoted 9 lines
drivers/mtd/spi/atmel.c +6
-0@@ -52,6 +52,14 @@ to_atmel_spi_flash(struct spi_flash *flash)static const struct atmel_spi_flash_params atmel_spi_flash_table[] = { { + .idcode1 =0x27 , + .l2_page_size =9 , + .pages_per_block =8 , + .blocks_per_sector =32 , + .nr_sectors =32 , + .name ="AT45DB321D" ,
the AT45DB321D is supposed to be 64 block per sector and 64 sectors
Best Regards,
J.
PATCH 1/1 mtd: add some at45 spi flash support
- AT45DB321D
- AT45DB161D
- AT45DB081D
- AT45DB041D
- AT45DB021D
- AT45DB011D
--- drivers/mtd/spi/atmel.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 48 insertions(+), 0 deletions(-)
drivers/mtd/spi/atmel.c +48 -0
@@ -52,6 +52,54 @@ to_atmel_spi_flash(struct spi_flash *flash)static const struct atmel_spi_flash_params atmel_spi_flash_table[] = { { + .idcode1 =0x22 , + .l2_page_size =8 , + .pages_per_block =8 , + .blocks_per_sector =16 , + .nr_sectors =4 , + .name ="AT45DB011D" , + }, + { + .idcode1 =0x23 , + .l2_page_size =8 , + .pages_per_block =8 , + .blocks_per_sector =16 , + .nr_sectors =8 , + .name ="AT45DB021D" , + }, + { + .idcode1 =0x24 , + .l2_page_size =8 , + .pages_per_block =8 , + .blocks_per_sector =32 , + .nr_sectors =8 , + .name ="AT45DB041D" , + }, + { + .idcode1 =0x25 , + .l2_page_size =8 , + .pages_per_block =8 , + .blocks_per_sector =32 , + .nr_sectors =16 , + .name ="AT45DB081D" , + }, + { + .idcode1 =0x26 , + .l2_page_size =9 , + .pages_per_block =8 , + .blocks_per_sector =32 , + .nr_sectors =16 , + .name ="AT45DB161D" , + }, + { + .idcode1 =0x27 , + .l2_page_size =9 , + .pages_per_block =8 , + .blocks_per_sector =64 , + .nr_sectors =64 , + .name ="AT45DB321D" , + }, + { .idcode1 =0x28 , .l2_page_size =10 , .pages_per_block =8 ,
Signature · 1 line
1.5.6.5
PATCH 1/1 mtd: add some at45 spi flash support
Quoted 8 lines · On Sunday 04 January 2009 01:44:07 Jean-Christophe PLAGNIOL-VILLARD wrote:
- AT45DB321D
- AT45DB161D
- AT45DB081D
- AT45DB041D
- AT45DB021D
- AT45DB011DSigned-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
whatever happened to this patch ? it isnt in mainline, i dont know of a "mtd" or "spi" git tree, and it should apply cleanly still ...
it shouldnt cause any regressions considering the existing atmel driver has all of 1 id in it today
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090319/0c1229e7/attachment.pgp
PATCH 1/1 mtd: add some at45 spi flash support
Quoted 8 lines · Mike Frysinger
Quoted 7 lines · On Sunday 04 January 2009 01:44:07 Jean-Christophe PLAGNIOL-VILLARD wrote:
- AT45DB321D
- AT45DB161D
- AT45DB081D
- AT45DB041D
- AT45DB021D
- AT45DB011D
Quoted 7 lines
Quoted 1 line
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>whatever happened to this patch ? it isnt in mainline, i dont know of a "mtd" or "spi" git tree, and it should apply cleanly still ...
it shouldnt cause any regressions considering the existing atmel driver has all of 1 id in it today
Normally it's still apply but it's still not in mainline
Best Regards,
J.
PATCH 1/1 spi/atmel: add AT45DB321D support
In reply to Jean-Christophe PLAGNIOL-VILLARDHmm... looking in the datasheet I have, it says:
Flexible Erase Options
? Page Erase (512 Bytes)
? Block Erase (4 Kbytes)
? Sector Erase (64 Kbytes)
? Chip Erase (32 Mbits)
which would indicate a third combo, different from mine and yours :) --- 16 blocks/sector and 64 sectors... The code only does page based so far, so I didn't catch this.
-brad
Quoted 28 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 13 lines · Mike Frysinger
From: Brad Bozarth <[email protected]>
Signed-off-by Brad Bozarth <[email protected]>Signed-off-by Mike Frysinger <[email protected]>--- drivers/mtd/spi/atmel.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)drivers/mtd/spi/atmel.c +0
-0drivers/mtd/spi/atmel.c to_atmel_spi_flash(struct spi_flash *flash) · line 60
Quoted 9 lines
drivers/mtd/spi/atmel.c +6
-0@@ -52,6 +52,14 @@ to_atmel_spi_flash(struct spi_flash *flash)static const struct atmel_spi_flash_params atmel_spi_flash_table[] = { { + .idcode1 =0x27 , + .l2_page_size =9 , + .pages_per_block =8 , + .blocks_per_sector =32 , + .nr_sectors =32 , + .name ="AT45DB321D" ,the AT45DB321D is supposed to be 64 block per sector and 64 sectors
Best Regards,
J.
PATCH 1/1 spi/atmel: add AT45DB321D support
tis 2009-01-06 klockan 14:48 -0800 skrev Brad Bozarth:
Quoted 7 lines
Hmm... looking in the datasheet I have, it says:
Flexible Erase Options
? Page Erase (512 Bytes)
? Block Erase (4 Kbytes)
? Sector Erase (64 Kbytes)
? Chip Erase (32 Mbits)
The dataflash is normally 528/1056 bytes per page.
D versions can be configured to have a 512/1024 bytes per page but that is wasting a couple of percent of the dataflash.
Best Regards
Ulf Samuelsson
Quoted 40 lines
which would indicate a third combo, different from mine and yours :) --- 16 blocks/sector and 64 sectors... The code only does page based so far, so I didn't catch this.
-brad
Quoted 25 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 13 lines · Mike Frysinger
From: Brad Bozarth <[email protected]>
Signed-off-by Brad Bozarth <[email protected]>Signed-off-by Mike Frysinger <[email protected]>--- drivers/mtd/spi/atmel.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)drivers/mtd/spi/atmel.c +0
-0drivers/mtd/spi/atmel.c to_atmel_spi_flash(struct spi_flash *flash) · line 60
Quoted 9 lines
drivers/mtd/spi/atmel.c +6
-0@@ -52,6 +52,14 @@ to_atmel_spi_flash(struct spi_flash *flash)static const struct atmel_spi_flash_params atmel_spi_flash_table[] = { { + .idcode1 =0x27 , + .l2_page_size =9 , + .pages_per_block =8 , + .blocks_per_sector =32 , + .nr_sectors =32 , + .name ="AT45DB321D" ,the AT45DB321D is supposed to be 64 block per sector and 64 sectors
Quoted 3 lines
Best Regards,
J._______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
PATCH 1/1 spi/atmel: add AT45DB321D support
Quoted 11 lines · On Wednesday 07 January 2009 14:40:30 Ulf Samuelsson wrote:
tis 2009-01-06 klockan 14:48 -0800 skrev Brad Bozarth:
Quoted 6 lines
Hmm... looking in the datasheet I have, it says:
Flexible Erase Options
? Page Erase (512 Bytes)
? Block Erase (4 Kbytes)
? Sector Erase (64 Kbytes)
? Chip Erase (32 Mbits)The dataflash is normally 528/1056 bytes per page.
D versions can be configured to have a 512/1024 bytes per page but that is wasting a couple of percent of the dataflash.
Blackfins can only boot with power of two flashes, so power of two page mode has to be supported for us ... not sure if the latest drivers have been fixed yet (both in u-boot and Linux)
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 835 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090108/f18afde0/attachment.pgp
PATCH 1/1 spi/atmel: add AT45DB321D support
Linux - yes, it's supported. Uboot - I have another patch that allows power of 2 mode (I believe it's on the blackfin portal).
Sent from my mobile
Quoted 19 lines · Mike Frysinger
Quoted 11 lines · On Wednesday 07 January 2009 14:40:30 Ulf Samuelsson wrote:
tis 2009-01-06 klockan 14:48 -0800 skrev Brad Bozarth:
Quoted 6 lines
Hmm... looking in the datasheet I have, it says:
Flexible Erase Options
? Page Erase (512 Bytes)
? Block Erase (4 Kbytes)
? Sector Erase (64 Kbytes)
? Chip Erase (32 Mbits)The dataflash is normally 528/1056 bytes per page.
D versions can be configured to have a 512/1024 bytes per page but that is wasting a couple of percent of the dataflash.Blackfins can only boot with power of two flashes, so power of two page mode
has to be supported for us ... not sure if the latest drivers have been fixed
yet (both in u-boot and Linux)
-mike
PATCH 1/1 spi/atmel: add AT45DB321D support
Quoted 2 lines · On Thursday 08 January 2009 15:33:09 Brad Bozarth wrote:
Linux - yes, it's supported. Uboot - I have another patch that allows power of 2 mode (I believe it's on the blackfin portal).
istr said patch was against the Blackfin eeprom/spi driver and not the new common layer ? ive been largely ignoring changes to that driver and focusing on adding support for spi flashes to the new subsystem (spansion/sst/etc...). -mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 835 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090108/80ea87c2/attachment.pgp