Skip to contentSkip to conversation

8250_pci: add support for netmos 9835

PATCH In review [email protected] 1 participant 1 message Jan 9, 2009 TTY layer and serial drivers

lore
Share & tools
lore
#0 lore raw

PATCH 3/3 8250_pci: add support for netmos 9835

From: Jiri Slaby <[email protected]>

Most of netmos 9835 hardware is handled by parport-serial. IBM introduces a device which doesn't have any parallel ports and have screwed subdevice PCI id (not corresponding to port numbers).

Handle this device (9710:9835 1014:0299) properly.

---

 drivers/serial/8250_pci.c |    8 ++++++++
 1 file changed, 8 insertions(+)
drivers/serial/8250_pci.c renamed from drivers/serial/8250_pci.c~8250_pci-add-support-for-netmos-9835 +8 -0
diff -puN drivers/serial/8250_pci.c~8250_pci-add-support-for-netmos-9835 drivers/serial/8250_pci.c
@@ -600,6 +600,10 @@ static int pci_netmos_init(struct pci_de
 	/* subdevice 0x00PS means <P> parallel, <S> serial */
 	unsigned int num_serial = dev->subsystem_device & 0xf;
 
+	if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+			dev->subsystem_device == 0x0299)
+		return 0;
+
 	if (num_serial == 0)
 		return -ENODEV;
 	return num_serial;
@@ -3094,6 +3098,10 @@ static struct pci_device_id serial_pci_t
 		0,
 		pbn_b0_8_115200 },
 
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+		PCI_VENDOR_ID_IBM, 0x0299,
+		0, 0, pbn_b0_bt_2_115200 },
+
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL

_