Skip to contentSkip to conversation

SIS900 show warning if bogus MAC address

PATCH In review Daniele Venzano 3 participants 3 messages Jan 11, 2009 – Jan 12, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 SIS900 show warning if bogus MAC address

The attached patch modifies the sis900 driver to show a warning at boot or module load time to show a message when a null MAC address (00:00:00:00:00:00) is read from the the hardware.
This seems to happen with newer usage of the sis900 chipset, since this never came up before.

--
Daniele Venzano
http://www.brownhat.org

drivers/net/sis900.c +22 -0
@@ -382,6 +382,25 @@ static int __devinit sis96x_get_mac_addr
 }
 
 /**
+ *      sis900_check_mac_addr - Check the MAc adress for validity
+ *	@net_dev: the net device that has the address to check
+ *
+ * 	Return false (0) if the mac address read from the hardware is
+ * 	composed of all zeros.
+ */
+
+static int __devinit sis900_check_mac_addr(struct net_device *net_dev)
+{
+	int i;
+
+	for (i = 0; i < 6; i++)
+		if (net_dev->dev_addr[i] != 0)
+			return 1;
+
+	return 0;
+}
+
+/**
  *	sis900_probe - Probe for sis900 device
  *	@pci_dev: the sis900 pci device
  *	@pci_id: the pci device ID
@@ -504,6 +523,9 @@ static int __devinit sis900_probe(struct
 	else
 		ret = sis900_get_mac_addr(pci_dev, net_dev);
 
+	if (sis900_check_mac_addr(net_dev) == 0)
+		printk(KERN_WARNING "%s: Read an invalid MAC address, remember to set one manually\n", dev_name);
+
 	if (ret == 0) {
 		printk(KERN_WARNING "%s: Cannot read MAC address.\n", dev_name);
 		ret = -ENODEV;
maintainer
#1 lore raw

From: Daniele Venzano <[email protected]>
Date: Sun, 11 Jan 2009 09:45:04 +0100

Quoted 7 lines

The attached patch modifies the sis900 driver to show a warning at boot or module load time to show a message when a null MAC address (00:00:00:00:00:00) is read from the the hardware.
This seems to happen with newer usage of the sis900 chipset, since this never came up before.

Choose a random mac address, as other drivers do in this situation, so that the user ends up with a usable interface.

#2 lore raw
In reply to Daniele Venzano
Quoted 6 lines · On Sun, 11 Jan 2009 09:45:04 +0100 Daniele Venzano <[email protected]> wrote:

The attached patch modifies the sis900 driver to show a warning at boot or module load time to show a message when a null MAC address (00:00:00:00:00:00) is read from the the hardware.
This seems to happen with newer usage of the sis900 chipset, since this never came up before.

Quoted 6 lines

--
Daniele Venzano
http://www.brownhat.org

/**
+ * sis900_check_mac_addr - Check the MAc adress for validity
+ * @net_dev: the net device that has the address to check
+ *
+ * Return false (0) if the mac address read from the hardware is
+ * composed of all zeros.
+ */
+
+static int __devinit sis900_check_mac_addr(struct net_device *net_dev) +{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ if (net_dev->dev_addr[i] != 0)
+ return 1;
+
+ return 0;
+}
+

This is a reimplementation of:

        return !is_zero_ether_addr(net_dev->dev_addr);

You probably want to use is_valid_ether_addr() instead.