pata_it821x: Update RDC UDMA handling
PATCH 1/1 pata_it821x: Update RDC UDMA handling
From: Alan Cox <[email protected]>
The UDMA affliction is apparently specific to revision 0x11. Keeps us in sync with drivers/ide current.
Signed-off-by Alan Cox <[email protected]>
---
drivers/ata/pata_it821x.c | 17 +++++++++++++---- 1 files changed, 13 insertions(+), 4 deletions(-)
drivers/ata/pata_it821x.c +13 -4
@@ -80,7 +80,7 @@#define DRV_NAME "pata_it821x" -#define DRV_VERSION "0.4.0" +#define DRV_VERSION "0.4.2"struct it821x_dev {
@@ -494,8 +494,6 @@ static int it821x_smart_set_mode(struct ata_link *link, struct ata_device **unus* special. In our case we need to lock the sector count to avoid * blowing the brains out of the firmware with large LBA48 requests * -* FIXME: When FUA appears we need to block FUA too. And SMART and -* basically we need to filter commands for this chip. */ static void it821x_dev_config (struct ata_device *adev)
@@ -890,6 +888,13 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, + .port_ops = &it821x_rdc_port_ops + }; +static const struct ata_port_info info_rdc_11 = { + .flags =ATA_FLAG_SLAVE_POSS , + .pio_mask =0x1f , + .mwdma_mask =0x07 ,/* No UDMA */ .port_ops = &it821x_rdc_port_ops };
@@ -903,7 +908,11 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)return rc;if (pdev->vendor ==PCI_VENDOR_ID_RDC ) { - ppi[0 ] = &info_rdc; +/* Deal with Vortex86SX */ +if (pdev->revision ==0x11 ) + ppi[0 ] = &info_rdc_11; +else + ppi[0 ] = &info_rdc; }else {/* Force the card into bypass mode if so requested */ if (it8212_noraid) {