83xx: PCI agent mode fixes for multi-board systems
PATCH 1/1 83xx: PCI agent mode fixes for multi-board systems
When running a system with 2 or more MPC8349EMDS boards in PCI agent mode, the boards will lock up the PCI bus by scanning against each other.
The boards lock against each other by trying to access the PCI bus before clearing their configuration lock bit. Both boards end up in a loop, sending and receiving "Target Not Ready" messages forever.
When running in PCI agent mode, the scanning now takes place after the boards have cleared their configuration lock bit.
Also, add a missing declaration to the mpc83xx.h header file, fixing a build warning.
--- cpu/mpc83xx/pci.c | 5 +++++ include/mpc83xx.h | 1 + 2 files changed, 6 insertions(+), 0 deletions(-)
cpu/mpc83xx/pci.c +5 -0
@@ -118,10 +118,12 @@ static void pci_init_bus(int bus, struct pci_region *reg)#ifdef CONFIG_PCI_SCAN_SHOW printf ("PCI: Bus Dev VenId DevId Class Int\n" );#endif +#ifndef CONFIG_PCISLAVE /* * Hose scan. */ hose->last_busno =pci_hose_scan (hose); +#endif }/*
@@ -190,6 +192,9 @@ void mpc83xx_pcislave_unlock(int bus)pci_hose_read_config_word (hose, dev,PCI_FUNCTION_CONFIG , ®16); reg16 &= ~(PCI_FUNCTION_CFG_LOCK );pci_hose_write_config_word (hose, dev,PCI_FUNCTION_CONFIG , reg16); + +/* The configuration bit is now unlocked, so we can scan the bus */ + hose->last_busno = pci_hose_scan(hose); }#endif
include/mpc83xx.h +1 -0
@@ -1173,6 +1173,7 @@#ifndef __ASSEMBLY__struct pci_region ;void mpc83xx_pci_init (int num_buses,struct pci_region **reg,int warmboot); +void mpc83xx_pcislave_unlock (int bus);#endif #endif /* __MPC83XX_H__ */
Signature · 1 line
1.5.4.3
PATCH 1/1 83xx: PCI agent mode fixes for multi-board systems
Quoted 7 lines · On Mon, 12 Jan 2009 13:32:26 -0800 Ira Snyder <[email protected]> wrote:
When running a system with 2 or more MPC8349EMDS boards in PCI agent mode, the boards will lock up the PCI bus by scanning against each other.
The boards lock against each other by trying to access the PCI bus before clearing their configuration lock bit. Both boards end up in a loop, sending and receiving "Target Not Ready" messages forever.
Quoted 8 lines
When running in PCI agent mode, the scanning now takes place after the boards have cleared their configuration lock bit.
Also, add a missing declaration to the
mpc83xx.hheader file, fixing a build warning.Signed-off-by Ira W. Snyder <[email protected]>---
applied to u-boot-mpc83xx next.
Thanks,
Kim