ppc4xx: Disable pci node in device tree on CPCI405 pci adapters
PATCH 1/1 ppc4xx: Disable pci node in device tree on CPCI405 pci adapters
Signed-off-by Matthias Fuchs <[email protected]>
--- board/esd/cpci405/cpci405.c | 24 ++++++++++++++++++++++++ 1 files changed, 24 insertions(+), 0 deletions(-)
board/esd/cpci405/cpci405.c +24 -0
@@ -21,6 +21,8 @@* MA 02111-1307 USA */ #include <common.h> +#include <libfdt.h> +#include <fdt_support.h> #include <asm/processor.h> #include <asm/io.h> #include <command.h>
@@ -523,6 +525,28 @@ int pci_pre_init(struct pci_controller *hose) }#endif /* defined(CONFIG_PCI) */ +#if defined(CONFIG_OF_LIBFDT ) && defined(CONFIG_OF_BOARD_SETUP ) +void ft_board_setup (void *blob,bd_t *bd) +{ +int rc; + +__ft_board_setup (blob, bd); + +/* +* Disable PCI in adapter mode. +*/ +if (!cpci405_host ()) { + rc =fdt_find_and_setprop (blob,"/plb/pci at ec000000" ,"status" , +"disabled" ,sizeof ("disabled" ),1 ); +if (rc) { +printf ("Unable to update property status in PCI node, " +"err=%s\n" , +fdt_strerror (rc)); + } + } +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ +#if defined(CONFIG_CPCI405AB )#define ONE_WIRE_CLEAR out_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \ CONFIG_SYS_FPGA_MODE), \
Signature · 1 line
1.5.6.3
PATCH 1/1 ppc4xx: Disable pci node in device tree on CPCI405 pci adapters
Quoted 1 line · Matthias Fuchs
Signed-off-by Matthias Fuchs <[email protected]>
Added to u-boot/master.
Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================