mmc: Add driver for Freescale eSDHC controllers
PATCH 1/1 mmc: Add driver for Freescale eSDHC controllers
From: Xie Xiaobo <[email protected]>
This patch adds support for the Freescale Enhanced Secure Digital Host Controller Interface as found in some Freescale PowerPC microprocessors (e.g. MPC837x SOCs).
--- drivers/mmc/host/Kconfig | 9 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/esdhc.c | 1321 +++++++++++++++++++++++++++++++++++++++++++++ drivers/mmc/host/esdhc.h | 255 +++++++++ 4 files changed, 1586 insertions(+), 0 deletions(-) create mode 100644 drivers/mmc/host/esdhc.c create mode 100644 drivers/mmc/host/esdhc.h
drivers/mmc/host/Kconfig +9 -0
@@ -65,6 +65,15 @@ config MMC_RICOH_MMC If unsure, say Y. +config MMC_ESDHC + tristate "Freescale Enhanced SD Host Controller Interface support" + depends on FSL_SOC + help + This selects the Freescale Enhanced SD Host Controller Interface + as found in some Freescale PowerPC microprocessors. + + If unsure, say N. + config MMC_OMAP tristate "TI OMAP Multimedia Card Interface support" depends on ARCH_OMAP
drivers/mmc/host/Makefile +1 -0
@@ -12,6 +12,7 @@ obj-$(CONFIG_MMC_IMX) += imxmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o +obj-$(CONFIG_MMC_ESDHC) += esdhc.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o
drivers/mmc/host/esdhc.c new file +1321 -0
1,321 lines not on this page · raw message
drivers/mmc/host/esdhc.h new file +255 -0
255 lines not on this page · raw message
Signature · 1 line
1.5.6.5
Quoted 3 lines
This patch adds support for the Freescale Enhanced Secure Digital Host Controller Interface as found in some Freescale PowerPC microprocessors (e.g. MPC837x SOCs).
The Freescale ESDHC controller is basically compatible with the standard SDHC controller. but the eshdc expand some bits.
The esdhc.c is much like the orignal sdhci.c.
it is possible to merge them.
Thanks, Dave
Quoted 9 lines · Liu Dave
Quoted 3 lines
This patch adds support for the Freescale Enhanced Secure Digital Host Controller Interface as found in some Freescale PowerPC microprocessors (e.g. MPC837x SOCs).
The Freescale ESDHC controller is basically compatible with the standard SDHC controller. but the eshdc expand some bits.
The
esdhc.cis much like the orignalsdhci.c.
it is possible to merge them.
Ah. I wonder why Freescale just didn't write some patches for sdhci, but copied the code instead...
Thanks for the info, I'll look into merging the driver into sdhci.
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
Quoted 4 lines · On Thu, 15 Jan 2009 02:56:05 +0300 Anton Vorontsov <[email protected]>…
Ah. I wonder why Freescale just didn't write some patches for sdhci, but copied the code instead...
Probably because it was quicker. Samsung did the same thing, but now Ben Dooks has patches to properly support it via sdhci.
Rgds
Signature · 9 lines
-- Pierre Ossman Linux kernel, MMC maintainer http://www.kernel.org rdesktop, core developer http://www.rdesktop.org WARNING: This correspondence is being monitored by the Swedish government. Make sure your server uses encryption for SMTP traffic and consider using PGP for end-to-end encryption.
Quoted 2 lines
Probably because it was quicker. Samsung did the same thing, but now Ben Dooks has patches to properly support it via sdhci.
Pierre,
What samsung driver are you talking? Could you point it to me?
Thanks, Dave
Quoted 6 lines · On Thu, 15 Jan 2009 14:11:09 +0800 "Liu Dave" <[email protected]> wrote:
Quoted 2 lines
Probably because it was quicker. Samsung did the same thing, but now Ben Dooks has patches to properly support it via sdhci.
Pierre,
What samsung driver are you talking? Could you point it to me?
I'm afraid I haven't seen any readily available sources for their driver. If you meant Ben's version, you can find the latest revision here:
http://marc.info/?t=122823266100005
Unfortunately marc.info didn't sort out the threading, but you should be able to find all the patches there or some other LKML archive.
Rgds
Signature · 9 lines
-- Pierre Ossman Linux kernel, MMC maintainer http://www.kernel.org rdesktop, core developer http://www.rdesktop.org WARNING: This correspondence is being monitored by the Swedish government. Make sure your server uses encryption for SMTP traffic and consider using PGP for end-to-end encryption.
Quoted 8 lines
I'm afraid I haven't seen any readily available sources for their driver. If you meant Ben's version, you can find the latest revision here:
=20
http://marc.info/?t=3D122823266100005
=20
Unfortunately marc.info didn't sort out the threading, but you should be able to find all the patches there or some other LKML archive.
Thanks Pierre, That is my needs.
Quoted 5 lines · Anton Vorontsov
Quoted 4 lines · Liu Dave
Quoted 3 lines
This patch adds support for the Freescale Enhanced Secure Digital Host Controller Interface as found in some Freescale PowerPC microprocessors (e.g. MPC837x SOCs).
Quoted 8 lines
Quoted 5 lines
The Freescale ESDHC controller is basically compatible with the standard SDHC controller. but the eshdc expand some bits.
The
esdhc.cis much like the orignalsdhci.c.
it is possible to merge them.Ah. I wonder why Freescale just didn't write some patches for sdhci, but copied the code instead...
For the same reasons earthmen like tea.
Signature · 3 lines
Ben ([email protected], http://www.fluff.org/) 'a smiley only costs 4 bytes'
Quoted 11 lines · Anton Vorontsov
From: Xie Xiaobo <[email protected]>
This patch adds support for the Freescale Enhanced Secure Digital Host Controller Interface as found in some Freescale PowerPC microprocessors (e.g. MPC837x SOCs).
Signed-off-by Xie Xiaobo <[email protected]>Signed-off-by Konjin Lai <[email protected]>Signed-off-by Joe D'Abbraccio <Joe.D'[email protected]>Signed-off-by Anton Vorontsov <[email protected]>---
Quoted 8 lines
drivers/mmc/host/Kconfig | 9 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/esdhc.c | 1321 ++++++++++++++++++++++++++++++++++++ +++++++++ drivers/mmc/host/esdhc.h | 255 +++++++++ 4 files changed, 1586 insertions(+), 0 deletions(-)create mode 100644
drivers/mmc/host/esdhc.c
create mode 100644drivers/mmc/host/esdhc.h
Want to work some device tree docs for this.
- k
Quoted 23 lines · Kumar Gala
Quoted 11 lines · Anton Vorontsov
From: Xie Xiaobo <[email protected]>
This patch adds support for the Freescale Enhanced Secure Digital Host Controller Interface as found in some Freescale PowerPC microprocessors (e.g. MPC837x SOCs).
Signed-off-by Xie Xiaobo <[email protected]>Signed-off-by Konjin Lai <[email protected]>Signed-off-by Joe D'Abbraccio <Joe.D'[email protected]>Signed-off-by Anton Vorontsov <[email protected]>---
Quoted 8 lines
drivers/mmc/host/Kconfig | 9 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/esdhc.c | 1321 ++++++++++++++++++++++++++++++++++++ +++++++++ drivers/mmc/host/esdhc.h | 255 +++++++++ 4 files changed, 1586 insertions(+), 0 deletions(-)create mode 100644
drivers/mmc/host/esdhc.c
create mode 100644drivers/mmc/host/esdhc.h
Quoted 1 line
Want to work some device tree docs for this.
Will do. Though all the needed nodes already in the .dts files. ;-)
Thanks,
Signature · 3 lines
Anton Vorontsov email: [email protected] irc://irc.freenode.net/bd2
drivers/mmc/host/Kconfig config MMC_RICOH_MMC · line 75
Quoted 9 lines · Anton Vorontsov
drivers/mmc/host/Kconfig +8
-0+config MMC_ESDHC + tristate "Freescale Enhanced SD Host Controller Interface support" + depends on FSL_SOC + help + This selects the Freescale Enhanced SD Host Controller Interface + as found in some Freescale PowerPC microprocessors. + + If unsure, say N.
The naming could be improved, calling it ESDHC instead of ESDHCI is very
confusing: SDHCI is the controller chip while SDHC is a type of card (high capacity SD). This driver clearly does not refer to the card type but rather to the controller.
Arnd <><