Skip to contentSkip to conversation

serial: Add 16850 uart type support to OF uart driver

PATCH New Matthias Fuchs 1 participant 1 message Jan 15, 2009 TTY layer and serial drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 serial: Add 16850 uart type support to OF uart driver

(Resend because former version does not apply cleanly anymore)

This patch adds support for "ns16850" as supported value of the compatible node in flat device tree uart descriptions.

This is needed for example when you have a XR16C2850 uart connected to a PPC405's external bus controller.

---
 drivers/serial/of_serial.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/serial/of_serial.c +1 -0
index a821e3a..14f8fa9 100644
@@ -163,6 +163,7 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = {
 	{ .type = "serial", .compatible = "ns16450",  .data = (void *)PORT_16450, },
 	{ .type = "serial", .compatible = "ns16550",  .data = (void *)PORT_16550, },
 	{ .type = "serial", .compatible = "ns16750",  .data = (void *)PORT_16750, },
+	{ .type = "serial", .compatible = "ns16850",  .data = (void *)PORT_16850, },
 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
 	{ .type = "serial", .compatible = "ibm,qpace-nwp-serial",
 					.data = (void *)PORT_NWPSERIAL, },
Signature · 1 line
1.5.6.3