Skip to contentSkip to conversation

Support epoch of 1980 in RTC emulation for MIPS Magnum

PATCH Superseded Stuart Brady 2 participants 4 messages Jan 11, 2009 – Jan 17, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Support epoch of 1980 in RTC emulation for MIPS Magnum

On the MIPS Magnum, the time that is held in the RTC's NVRAM should be relative to midnight on 1980-01-01. This patch adds an extra parameter to rtc_init(), allowing different epochs to be used. For the Magnum, 1980 is specified, and for all other machines, 2000 is specified.

I've not modified the handling of the century byte, as I'm not entirely sure what's required. With an epoch of 1980 and a year of 2009, you could argue that the century byte should hold either 0, 1, 19 or 20.

hw/mc146818rtc.c +9 -4
diff -urpN qemu-old/hw/mc146818rtc.c qemu-new/hw/mc146818rtc.c
@@ -60,6 +60,7 @@ struct RTCState {
     uint8_t cmos_data[128];
     uint8_t cmos_index;
     struct tm current_tm;
+    int base_year;
     qemu_irq irq;
     int it_shift;
     /* periodic timer */
@@ -217,7 +218,7 @@ static void rtc_set_time(RTCState *s)
     tm->tm_wday = from_bcd(s, s->cmos_data[RTC_DAY_OF_WEEK]) - 1;
     tm->tm_mday = from_bcd(s, s->cmos_data[RTC_DAY_OF_MONTH]);
     tm->tm_mon = from_bcd(s, s->cmos_data[RTC_MONTH]) - 1;
-    tm->tm_year = from_bcd(s, s->cmos_data[RTC_YEAR]) + 100;
+    tm->tm_year = from_bcd(s, s->cmos_data[RTC_YEAR]) + s->base_year - 1900;
 }
 
 static void rtc_copy_date(RTCState *s)
@@ -238,7 +239,8 @@ static void rtc_copy_date(RTCState *s)
     s->cmos_data[RTC_DAY_OF_WEEK] = to_bcd(s, tm->tm_wday + 1);
     s->cmos_data[RTC_DAY_OF_MONTH] = to_bcd(s, tm->tm_mday);
     s->cmos_data[RTC_MONTH] = to_bcd(s, tm->tm_mon + 1);
-    s->cmos_data[RTC_YEAR] = to_bcd(s, tm->tm_year % 100);
+    s->cmos_data[RTC_YEAR] = to_bcd(s, (tm->tm_year + 10000 - s->base_year)
+                                       % 100);
 }
 
 /* month is between 0 and 11. */
@@ -473,7 +475,7 @@ static int rtc_load(QEMUFile *f, void *o
     return 0;
 }
 
-RTCState *rtc_init(int base, qemu_irq irq)
+RTCState *rtc_init(int base, qemu_irq irq, int base_year)
 {
     RTCState *s;
 
@@ -487,6 +489,7 @@ RTCState *rtc_init(int base, qemu_irq ir
     s->cmos_data[RTC_REG_C] = 0x00;
     s->cmos_data[RTC_REG_D] = 0x80;
 
+    s->base_year = base_year;
     rtc_set_date_from_host(s);
 
     s->periodic_timer = qemu_new_timer(vm_clock,
@@ -578,7 +581,8 @@ static CPUWriteMemoryFunc *rtc_mm_write[
     &cmos_mm_writel,
 };
 
-RTCState *rtc_mm_init(target_phys_addr_t base, int it_shift, qemu_irq irq)
+RTCState *rtc_mm_init(target_phys_addr_t base, int it_shift, qemu_irq irq,
+                      int base_year)
 {
     RTCState *s;
     int io_memory;
@@ -593,6 +597,7 @@ RTCState *rtc_mm_init(target_phys_addr_t
     s->cmos_data[RTC_REG_C] = 0x00;
     s->cmos_data[RTC_REG_D] = 0x80;
 
+    s->base_year = base_year;
     rtc_set_date_from_host(s);
 
     s->periodic_timer = qemu_new_timer(vm_clock,
hw/mips_jazz.c +1 -1
diff -urpN qemu-old/hw/mips_jazz.c qemu-new/hw/mips_jazz.c
@@ -240,7 +240,7 @@ void mips_jazz_init (ram_addr_t ram_size
     fdctrl_init(rc4030[1], 0, 1, 0x80003000, fds);
 
     /* Real time clock */
-    rtc_init(0x70, i8259[8]);
+    rtc_init(0x70, i8259[8], 1980);
     s_rtc = cpu_register_io_memory(0, rtc_read, rtc_write, env);
     cpu_register_physical_memory(0x80004000, 0x00001000, s_rtc);
 
hw/mips_malta.c +1 -1
diff -urpN qemu-old/hw/mips_malta.c qemu-new/hw/mips_malta.c
@@ -916,7 +916,7 @@ void mips_malta_init (ram_addr_t ram_siz
 
     /* Super I/O */
     i8042_init(i8259[1], i8259[12], 0x60);
-    rtc_state = rtc_init(0x70, i8259[8]);
+    rtc_state = rtc_init(0x70, i8259[8], 2000);
     if (serial_hds[0])
         serial_init(0x3f8, i8259[4], 115200, serial_hds[0]);
     if (serial_hds[1])
hw/mips_r4k.c +1 -1
diff -urpN qemu-old/hw/mips_r4k.c qemu-new/hw/mips_r4k.c
@@ -229,7 +229,7 @@ void mips_r4k_init (ram_addr_t ram_size,
     /* The PIC is attached to the MIPS CPU INT0 pin */
     i8259 = i8259_init(env->irq[2]);
 
-    rtc_state = rtc_init(0x70, i8259[8]);
+    rtc_state = rtc_init(0x70, i8259[8], 2000);
 
     /* Register 64 KB of ISA IO space at 0x14000000 */
     isa_mmio_init(0x14000000, 0x00010000);
hw/pc.c +1 -1
diff -urpN qemu-old/hw/pc.c qemu-new/hw/pc.c
@@ -966,7 +966,7 @@ static void pc_init1(ram_addr_t ram_size
         }
     }
 
-    rtc_state = rtc_init(0x70, i8259[8]);
+    rtc_state = rtc_init(0x70, i8259[8], 2000);
 
     qemu_register_boot_set(pc_boot_set, rtc_state);
 
hw/pc.h +3 -2
diff -urpN qemu-old/hw/pc.h qemu-new/hw/pc.h
@@ -81,8 +81,9 @@ void i8042_mm_init(qemu_irq kbd_irq, qem
 
 typedef struct RTCState RTCState;
 
-RTCState *rtc_init(int base, qemu_irq irq);
-RTCState *rtc_mm_init(target_phys_addr_t base, int it_shift, qemu_irq irq);
+RTCState *rtc_init(int base, qemu_irq irq, int base_year);
+RTCState *rtc_mm_init(target_phys_addr_t base, int it_shift, qemu_irq irq,
+                      int base_year);
 void rtc_set_memory(RTCState *s, int addr, int val);
 void rtc_set_date(RTCState *s, const struct tm *tm);
 void cmos_set_s3_resume(void);
hw/ppc_prep.c +1 -1
diff -urpN qemu-old/hw/ppc_prep.c qemu-new/hw/ppc_prep.c
@@ -664,7 +664,7 @@ static void ppc_prep_init (ram_addr_t ra
                  vga_ram_size, 0, 0);
     //    openpic = openpic_init(0x00000000, 0xF0000000, 1);
     //    pit = pit_init(0x40, i8259[0]);
-    rtc_init(0x70, i8259[8]);
+    rtc_init(0x70, i8259[8], 2000);
 
     serial_init(0x3f8, i8259[4], 115200, serial_hds[0]);
     nb_nics1 = nb_nics;
Signature · 1 line
Stuart Brady
#1 lore raw

In message: <[email protected]>
Stuart Brady <[email protected]> writes:
: I've not modified the handling of the century byte, as I'm not entirely : sure what's required. With an epoch of 1980 and a year of 2009, you : could argue that the century byte should hold either 0, 1, 19 or 20.

What does WinNT/mips expect?

Warner

#2 lore raw
Quoted 7 lines · M. Warner Losh

In message: <[email protected]>
Stuart Brady <[email protected]> writes:
: I've not modified the handling of the century byte, as I'm not entirely : sure what's required. With an epoch of 1980 and a year of 2009, you : could argue that the century byte should hold either 0, 1, 19 or 20.

What does WinNT/mips expect?

I've been informed that WinNT 3.50/MIPS does not read the century byte, and I expect that other versions do the same, as an epoch of 1980 will won't break until 2080.

Cheers,

Signature · 1 line
Stuart Brady
#3 lore raw

In message: <[email protected]>
Stuart Brady <[email protected]> writes:
: On Sun, Jan 11, 2009 at 10:47:33AM -0700, M. Warner Losh wrote:
: > In message: <[email protected]>
: > Stuart Brady <[email protected]> writes:
: > : I've not modified the handling of the century byte, as I'm not entirely : > : sure what's required. With an epoch of 1980 and a year of 2009, you : > : could argue that the century byte should hold either 0, 1, 19 or 20. : >
: > What does WinNT/mips expect?
:
: I've been informed that WinNT 3.50/MIPS does not read the century byte, : and I expect that other versions do the same, as an epoch of 1980 will : won't break until 2080.

OpenBSD/arc and NetBSD/arc then would be the only other ones that might care. OpenBSD/arc is hard for me to check on, since it is so old.

NetBSD/arc uses a common set of routines to read it, so it is a little hard to trace through. But my quick look shows that there's no function to read the centry set, so the common code will never read the centry byte.

Warner